Error when using bulk collect
HelloI tried with the following code,
DECLARE
TYPE EmpRec IS RECORD (last_name EMP.ename%TYPE,
salary emp.sal%TYPE);
emp_info EmpRec;
TYPE empnest IS TABLE OF EMP.empno%TYPE;
empnestvar empnest;
BEGIN
empnestvar := empnest(7566,7788);
FOR i in empnestvar.first..empnestvar.last LOOP
UPDATE emp SET sal = sal * 1.1 WHERE empno = empnestvar(i)
RETURNING ename, sal BULK COLLECT INTO emp_info;
DBMS_OUTPUT.PUT_LINE('Just gave a raise to ' || emp_info.last_name ||
', who now makes ' || emp_info.salary);
ROLLBACK;
END LOOP;
END;
get the following err RETURNING ename, sal BULK COLLECT INTO emp_info;
*
ERROR at line 11:
ORA-03113: end-of-file on communication channel
Could you please advice me in thisThank you
Why he does ' t work with
COLLECTION in BULK IN the variable of type record. >
This is how it is designed and defined! In fact, to put it very simply, BULK COLLECT means collectors several at a go (forgive me if my English is not the best), the record type variable can contain both.
A vary another important thing that I missed before, avoid using COMMIT or ROLLBACK inside the loop. You can search for AskTom for more explanations.
Published by: mohamed on April 8, 2011 18:19
Tags: Database
Similar Questions
-
Procedure failed when using bulk collect clause and works with the cursor
Hi all
I use "BULK collect into" clause in my procedure and it is a failure after 21 minutes and gives the error "end of file communication channel.
After that this error comes when I tried to connect the database it gives following error.
ORA-01034 - Oracle is not available.
ORA - 27101-shared memory realm does not exist.
SVR4 error: 2: no such file or directory.
When I use the cursor instead of the COLLECTION in BULK IN the clause, it runs successfully.
Following the code works with the slider.
procedure work_kiosk_full (an_jobid in number, ac_sqlcode out varchar2, ac_sqlerrm out varchar2) is
ld_curr_time Date;
cursor cur_work_kiosk is
Select distinct jt.jt_id AS jt_id,
NVL ((ROUND ((jt_date_completed-jt_date_requested) * 24, 2)))
),
0
) AS actual_hrs_to_complete,
NVL ((ROUND ((jt_date_responded-jt_date_requested) * 24, 2)))
),
0
) AS actual_hrs_to_respond,
peo1.peo_name AS agent_name,
peo1.peo_user_name AS asagent_soe_id,
Le.lglent_desc AS ap_system,
"" AS assign_work_request_comment,
DECODE (jt.jt_bill_id,
138802, 'BILLABLE CLIENT. "
138803, "CONTRACTED"
"138804, ' BILLABLE IN-HOUSE."
NULL, ' '
) Billable.
BL.bldg_name_cc BUILDING, bl.bldg_id_ls AS building_id,
DECODE (bl.bldg_active_cc,
'Y', 'ACTIVE',
'INACTIVE '.
) AS building_status,
DECODE (jt.jt_wrk_cause_id,
141521, "STANDARD WEAR."
141522, "NEGLIGENCE."
141523, "ACCIDENTAL."
141524, "MECHANICAL FAILURE."
141525, "CONTROL."
141526, "VANDAL."
141527, 'STANDARD ',.
141528, "WORK PROJECT",.
6058229, "TEST."
NULL, ' '
) AS cause_type,
' ' AS comments, peo3.peo_name AS completed_by,
JT.jt_requestor_email AS contact_email,
JT.jt_requestor_name_first
|| ' '
|| JT.jt_requestor_name_last AS contact_name,
JT.jt_requestor_phone AS contact_phone,
CC.cstctrcd_apcode AS corp_code,
CC.cstctrcd_code AS cost_center,
JT.jt_date_closed AS date_closed,
JT.jt_date_completed AS date_completed,
JT.jt_date_requested AS date_requested,
JT.jt_date_responded AS date_responded,
JT.jt_date_response_ecd AS date_response_ecd,
JT.jt_date_scheduled AS date_scheduled,
DECODE (jt.jt_def_id,
139949, "WTG VENDOR RESPONSE."
139950, "WAITING ON PARTS."
139951, "AVAILABILITY OF THE HAND ŒUVRE."
139952, "WORK DEFERRED-HI PRI."
139953, "APPROVAL OF WIND TURBINES."
139954, "FUNDING."
139955, "ACCESS DENIED."
139956, "WTG MATERIAL."
NULL, ' '
) AS deferral_reason,
JT.jt_description as description,
JT.jt_date_resched_ecd IN the development of the young child,
FMG.facility_manager AS facility_manager,
FL.floors_text AS FLOOR, gl.genled_desc AS general_ledger,
'' AS kiosk_date_requested,' ' AS kiosk_dispatch_confirmed.
"" AS kiosk_dispatched,
EQP.equip_customer_code AS linked_equipment_alias,
EQP.equip_id AS linked_equipment_id,
EQP.equip_text AS linked_equipment_name,
DECODE (jt_originator_type_id,
1000, "PROJECT MOVE REQUEST."
138834, "CUSTOMER OPEN CORRECTION."
138835, "OPEN REQUEST CUSTOMER."
138836, "CORRECTIVE MAINTENANCE",.
138837, "BOOKING CONFERENCE ROOM."
138838, "PROJECT INITIATED REQUEST."
138839, "PLANNED PREVENTATIVE MAINTENANCE."
138840, "COULD START FREE APPLICATION."
NULL, ' '
) AS originator_type,
"" AS payment_terms, priority_text AS priority_code,
swoty.sworktype_text AS problem_type,
Prop.property_name_cc as a property,
JT.jt_cost_quote_total AS quote_total,
par.levels_name IN the region,
DECODE (jt.jt_repdef_id,
141534, 'ADJUSTED SETTING. "
141535, "THE TRAINING OF THE END,"
141536, "NEW REQUEST"
141537, "NO INVESTIGATION OF REPAIR."
141538 "REPLACED PARTS."
141539, 'REPLACE EQUIPMEN.
1000699, "NEW REQUEST"
NULL, ' '
) AS repair_definitions,
JT.jt_repairdesc AS MARKED_COR,
JT.jt_requestor AS applicant, ' ' AS requestor_cost_center.
JT.jt_requestor_email AS requestor_email,
JT.jt_requestor_name_first AS requestor_name,
JT.jt_requestor_phone AS requestor_phone,
"" LIKE response_time, rm.room_name_cc ROOM,
P1.peo_provider_code1 AS service_provider,
P1.peo_address_1 AS service_provider_address,
peocity.city_text service_provider_city,
P1.peo_provider_code1 AS service_provider_code,
peocity.city_country_name AS service_provider_country,
peocur.currency_text AS service_provider_currency,
P1.peo_name AS service_provider_description,
P1.peo_dispatch_method AS serv_prov_dispatc_hmethod,
P1.peo_rate_double AS serv_prov_double_time_rate,
P1.peo_email AS service_provider_email,
P1.peo_emergency_phone AS serv_prov_emergency_phone,
P1.peo_fax AS service_provider_fax_number,
P1.peo_home_phone AS service_provider_home_phone,
P1.peo_rate_hourly AS service_provider_hourly_rate,
P1.peo_title AS service_provider_job_title,
P1.peo_method_id AS service_provider_method,
P1.peo_cell_phone AS service_provider_mobile_phone,
P1.peo_pager AS service_provider_pager,
P1.peo_rate_differential AS service_provider_rates,
P1.peo_rate_differential AS ser_prov_shift_differential,
peocity.city_state_prov_text AS serv_prov_state_province,
DECODE (p1.peo_active,
'Y', 'ACTIVE',
'INACTIVE '.
) AS service_provider_status,
P1.peo_url AS serv_prov_web_site_address,
P1.peo_phone AS service_provider_work_phone,
P1.peo_postal_code AS serv_prov_zip_postal_code, ' ' shift, as.
' ' AS skill,.
DECODE (jt.jt_bigstatus_id,
138813, «NEWS»,
138814 "PENDING."
138815, 'OPEN ',.
138816, "END."
138817, 'CLOSED ',.
138818, "CANCELLED."
NULL, ' '
) The STATUS,
Lev.levels_name IN the subregion, ' ' IN the trade.
P1.peo_ls_interface_code1 AS vendor_id,
P1.peo_fax AS vendor_purchasing_fax,
P1.peo_vendor_site_code AS vendor_sitecode,
JT.jt_id AS vendor_ticket, p1.peo_name AS vendor_companyname,
JT.jt_requestor_vip AS vip, wo.wo_id AS work_order_no,
JT.jt_id AS work_request,
JT.jt_class_id AS work_request_class,
woty.worktype_text AS work_type, ' ' AS wr_cost.
JT.jt_description AS wr_description,
"" AS wr_dispatch_method,
DECODE (jt.jt_bigstatus_id,
138813, «NEWS»,
138814 "PENDING."
138815, 'OPEN ',.
138816, "END."
138817, 'CLOSED ',.
138818, "CANCELLED."
NULL, ' '
) AS wr_status,
ctrY.country_name as a country
OF citi.jobticket jt,.
Citi.Property prop,
Citi.Bldg bl,
Citi.bldg_levels bldglvl,
civil LEVEL lev,
civil by LEVELS.
(SELECT crstools.stragg (peo_name) facility_manager,
bldgcon_bldg_id
OF citi.bldg_contacts, citi.people
WHERE bldgcon_peo_id = peo_id
AND IN bldgcon_contype_id (40181, 10142)
FMG GROUP BY bldgcon_bldg_id),
Citi.floors, fl,
Citi.Room rm,
Citi.general_ledger gl,
the Citi.legal_entity
Citi.cost_center_codes cc,
Citi.Equipment eqp,
Citi.workType woty,
Citi.subworktype swoty,
Citi.work_order wo,
Jtwo Citi.jt_workers,
Citi.Priority,
Ctry Citi.Country,
Citi.People p1,
Citi.People peo3,
Citi.People peo1,
Citi.City peocity,
Citi.Currency peocur
WHERE jt.jt_bldg_id = bl.bldg_id
AND bl.bldg_id = bldglvl.bldg_levels_bldg_id
AND bldglvl.bldg_levels_levels_id = lev.levels_id
AND lev.levels_parent = par.levels_id (+)
AND prop.property_id = bl.bldg_property_id
AND bl.bldg_active_ls <>' n
AND jt.jt_floors_id = fl.floors_id (+)
AND jt.jt_room_id = rm.room_id (+)
AND jt.jt_bldg_id = fmg.bldgcon_bldg_id (+)
AND jt.jt_genled_id = gl.genled_id (+)
AND gl.genled_lglent_id = le.lglent_id (+)
AND jt.jt_cstctrcd_id = cc.cstctrcd_id (+)
AND jt.jt_equip_id = eqp.equip_id (+)
AND jt.jt_id = jtwo.jtw_jt_id (+)
AND jt.jt_worktype_id = woty.worktype_id (+)
AND jt.jt_sworktype_id = swoty.sworktype_id (+)
AND jt.jt_wo_id = wo.wo_id
AND jt.jt_priority_id = priority_id (+)
- AND jt.jt_date_requested > = ADD_MONTHS (SYSDATE,-12)
AND jt.jt_last_update > = ADD_MONTHS (ld_curr_time-12)
AND bl.bldg_country_id = ctry.country_id
AND jtwo.jtw_peo_id = p1.peo_id (+)
AND p1.peo_city_id = peocity.city_id (+)
AND jt.jt_completed_by_peo_id = peo3.peo_id (+)
AND p1.peo_rate_currency_id = peocur.currency_id (+)
AND jt.jt_agent_peo_id = peo1.peo_id (+);
BEGIN
run immediately 'truncate table crstools.drt_bom_work_kiosk;
Select sysdate in double ld_curr_time;
FOR cur_rec in cur_work_kiosk LOOP
IF MOD (cur_work_kiosk % rowcount, 10000) = 0 then
COMMIT;
END IF;
INSERT INTO crstools.drt_bom_work_kiosk
(JT_ID
ACTUAL_HRS_TO_COMPLETE
ACTUAL_HRS_TO_RESPOND
AGENT_NAME
ASAGENT_SOE_ID
AP_SYSTEM
ASSIGN_WORK_REQUEST_COMMENT
BILLABLE
BUILDING
BUILDING_ID
BUILDING_STATUS
CAUSE_TYPE
COMMENTS
COMPLETED_BY
CONTACT_EMAIL
CONTACT_NAME
CONTACT_PHONE
CORP_CODE
COST_CENTER
DATE_CLOSED
DATE_COMPLETED
DATE_REQUESTED
DATE_RESPONDED
DATE_RESPONSE_ECD
DATE_SCHEDULED
DEFERRAL_REASON
DESCRIPTION
DPE
FACILITY_MANAGER
FLOOR
GENERAL_LEDGER
KIOSK_DATE_REQUESTED
KIOSK_DISPATCH_CONFIRMED
KIOSK_DISPATCHED
LINKED_EQUIPMENT_ALIAS
LINKED_EQUIPMENT_ID
LINKED_EQUIPMENT_NAME
ORIGINATOR_TYPE
PAYMENT_TERMS
PRIORITY_CODE
PROBLEM_TYPE
PROPERTY
QUOTE_TOTAL
REGION
REPAIR_DEFINITIONS
MARKED_COR
APPLICANT
REQUESTOR_COST_CENTER
REQUESTOR_EMAIL
REQUESTOR_NAME
REQUESTOR_PHONE
RESPONSE_TIME
ROOM
SERVICE_PROVIDER
SERVICE_PROVIDER_ADDRESS
SERVICE_PROVIDER_CITY
SERVICE_PROVIDER_CODE
SERVICE_PROVIDER_COUNTRY
SERVICE_PROVIDER_CURRENCY
SERVICE_PROVIDER_DESCRIPTION
SERV_PROV_DISPATC_HMETHOD
SERV_PROV_DOUBLE_TIME_RATE
SERVICE_PROVIDER_EMAIL
SERV_PROV_EMERGENCY_PHONE
SERVICE_PROVIDER_FAX_NUMBER
SERVICE_PROVIDER_HOME_PHONE
SERVICE_PROVIDER_HOURLY_RATE
SERVICE_PROVIDER_JOB_TITLE
SERVICE_PROVIDER_METHOD
SERVICE_PROVIDER_MOBILE_PHONE
SERVICE_PROVIDER_PAGER
SERVICE_PROVIDER_RATES
SER_PROV_SHIFT_DIFFERENTIAL
SERV_PROV_STATE_PROVINCE
SERVICE_PROVIDER_STATUS
SERV_PROV_WEB_SITE_ADDRESS
SERVICE_PROVIDER_WORK_PHONE
SERV_PROV_ZIP_POSTAL_CODE
MAJ
SKILLS
STATUS
SUBREGION
TRADE
VENDOR_ID
VENDOR_PURCHASING_FAX
VENDOR_SITECODE
VENDOR_TICKET
VENDOR_COMPANYNAME
VIP
WORK_ORDER_NO
WORK_REQUEST
WORK_REQUEST_CLASS
WORK_TYPE
WR_COST
WR_DESCRIPTION
WR_DISPATCH_METHOD
WR_STATUS
COUNTRY
CREATE_DATE
)
VALUES
(cur_rec.jt_id
cur_rec, ACTUAL_HRS_TO_COMPLETE
cur_rec, ACTUAL_HRS_TO_RESPOND
cur_rec, AGENT_NAME
cur_rec, ASAGENT_SOE_ID
cur_rec, AP_SYSTEM
cur_rec, ASSIGN_WORK_REQUEST_COMMENT
BILLABLE cur_rec.
cur_rec, BUILDING
cur_rec, BUILDING_ID
cur_rec, BUILDING_STATUS
cur_rec, CAUSE_TYPE
cur_rec.COMMENTS
cur_rec.COMPLETED_BY
cur_rec, CONTACT_EMAIL
cur_rec, CONTACT_NAME
cur_rec, CONTACT_PHONE
cur_rec, CORP_CODE
cur_rec, COST_CENTER
cur_rec, DATE_CLOSED
cur_rec, DATE_COMPLETED
cur_rec, DATE_REQUESTED
cur_rec, DATE_RESPONDED
cur_rec, DATE_RESPONSE_ECD
cur_rec, DATE_SCHEDULED
cur_rec, DEFERRAL_REASON
cur_rec, DESCRIPTION
cur_rec, DEVELOPMENT OF THE YOUNG CHILD
cur_rec, FACILITY_MANAGER
cur_rec, FLOOR
cur_rec, GENERAL_LEDGER
cur_rec, KIOSK_DATE_REQUESTED
cur_rec, KIOSK_DISPATCH_CONFIRMED
cur_rec, KIOSK_DISPATCHED
cur_rec, LINKED_EQUIPMENT_ALIAS
cur_rec, LINKED_EQUIPMENT_ID
cur_rec, LINKED_EQUIPMENT_NAME
cur_rec, ORIGINATOR_TYPE
cur_rec, PAYMENT_TERMS
cur_rec, PRIORITY_CODE
cur_rec, PROBLEM_TYPE
cur_rec, PROPERTY
cur_rec, QUOTE_TOTAL
cur_rec, REGION
cur_rec, REPAIR_DEFINITIONS
cur_rec, MARKED_COR
cur_rec, APPLICANT
cur_rec, REQUESTOR_COST_CENTER
cur_rec, REQUESTOR_EMAIL
cur_rec, REQUESTOR_NAME
cur_rec, REQUESTOR_PHONE
cur_rec, RESPONSE_TIME
cur_rec, ROOM
cur_rec, SERVICE_PROVIDER
cur_rec, SERVICE_PROVIDER_ADDRESS
cur_rec, SERVICE_PROVIDER_CITY
cur_rec, SERVICE_PROVIDER_CODE
cur_rec, SERVICE_PROVIDER_COUNTRY
cur_rec, SERVICE_PROVIDER_CURRENCY
cur_rec, SERVICE_PROVIDER_DESCRIPTION
cur_rec, SERV_PROV_DISPATC_HMETHOD
cur_rec, SERV_PROV_DOUBLE_TIME_RATE
cur_rec, SERVICE_PROVIDER_EMAIL
cur_rec, SERV_PROV_EMERGENCY_PHONE
cur_rec, SERVICE_PROVIDER_FAX_NUMBER
cur_rec, SERVICE_PROVIDER_HOME_PHONE
cur_rec, SERVICE_PROVIDER_HOURLY_RATE
cur_rec, SERVICE_PROVIDER_JOB_TITLE
cur_rec, SERVICE_PROVIDER_METHOD
cur_rec, SERVICE_PROVIDER_MOBILE_PHONE
cur_rec, SERVICE_PROVIDER_PAGER
cur_rec, SERVICE_PROVIDER_RATES
cur_rec, SER_PROV_SHIFT_DIFFERENTIAL
cur_rec, SERV_PROV_STATE_PROVINCE
cur_rec, SERVICE_PROVIDER_STATUS
cur_rec, SERV_PROV_WEB_SITE_ADDRESS
cur_rec, SERVICE_PROVIDER_WORK_PHONE
cur_rec, SERV_PROV_ZIP_POSTAL_CODE
cur_rec, UPDATE
cur_rec SKILL.
cur_rec, STATUS
cur_rec subregion.
cur_rec, TRADE
cur_rec, VENDOR_ID
cur_rec, VENDOR_PURCHASING_FAX
cur_rec, VENDOR_SITECODE
cur_rec, VENDOR_TICKET
cur_rec, VENDOR_COMPANYNAME
cur_rec, VIP
cur_rec, WORK_ORDER_NO
cur_rec, WORK_REQUEST
cur_rec, WORK_REQUEST_CLASS
cur_rec, WORK_TYPE
cur_rec, WR_COST
cur_rec, WR_DESCRIPTION
cur_rec, WR_DISPATCH_METHOD
cur_rec, WR_STATUS
cur_rec, COUNTRY
ld_curr_time
);
END LOOP;
COMMIT;
exception
while others then
Rollback;
dbms_output.put_line('SQLCODE:'||) SQLCODE. "Error :'|| SQLERRM);
end work_kiosk_full;
Note: total record inserted 849000.
The same code does not work with big collect in would adopt.
Please help me why this is happening.
Thanks and greetings
Shyam ~.Shyam,
I agree with Billy.
Why are you not using an INSERT..SELECT ? Also, what are you trying to achieve by - incremental commits? - copying data from one table to another (using expensive I/O)? - using dynamic DML? Most of these approaches are typically wrong - and not recommended for scalable and performant Oracle applications.
I could see you using a CURSOR for LOOP if you change the data inserted so that you could not encapsulate the changes in a query, but you do an insert in right in the table of your cursor. A much more effective way would be to use the following changes I made to your code sample:
PROCEDURE WORK_KIOSK_FULL(AN_JOBID IN NUMBER, AC_SQLCODE OUT VARCHAR2, AC_SQLERRM OUT VARCHAR2) IS BEGIN EXECUTE IMMEDIATE 'truncate table crstools.drt_bom_work_kiosk'; /* Note: The APPEND hint forces a Direct Path INSERT (see Link below code sample) and is combined with the NOLOGGING Hint */ /* To dramtically increase performance. The Direct Path INSERT inserts records above the High-Water Mark on the table. */ INSERT /*+ APPEND NOLOGGING */ INTO CRSTOOLS.DRT_BOM_WORK_KIOSK (JT_ID ,ACTUAL_HRS_TO_COMPLETE ,ACTUAL_HRS_TO_RESPOND ,AGENT_NAME ,ASAGENT_SOE_ID ,AP_SYSTEM -- ,ASSIGN_WORK_REQUEST_COMMENT /* I commented out this COLUMN because it doesn't make sense to me to insert */ ,BILLABLE /* a couple of space characters into a table. If the intent is to leave the column NULL */ ,BUILDING /* don't include it in your INSERT statement and it will be NULL. If there is a valid reason */ ,BUILDING_ID /* for inserting the spaces, then remove the "line comments" from the insert and select statments */ ,BUILDING_STATUS ,CAUSE_TYPE -- ,COMMENTS ,COMPLETED_BY ,CONTACT_EMAIL ,CONTACT_NAME ,CONTACT_PHONE ,CORP_CODE ,COST_CENTER ,DATE_CLOSED ,DATE_COMPLETED ,DATE_REQUESTED ,DATE_RESPONDED ,DATE_RESPONSE_ECD ,DATE_SCHEDULED ,DEFERRAL_REASON ,DESCRIPTION ,ECD ,FACILITY_MANAGER ,FLOOR ,GENERAL_LEDGER -- ,KIOSK_DATE_REQUESTED -- ,KIOSK_DISPATCH_CONFIRMED -- ,KIOSK_DISPATCHED ,LINKED_EQUIPMENT_ALIAS ,LINKED_EQUIPMENT_ID ,LINKED_EQUIPMENT_NAME ,ORIGINATOR_TYPE -- ,PAYMENT_TERMS ,PRIORITY_CODE ,PROBLEM_TYPE ,PROPERTY ,QUOTE_TOTAL ,REGION ,REPAIR_DEFINITIONS ,REPAIR_DESCRIPTION ,REQUESTOR -- ,REQUESTOR_COST_CENTER ,REQUESTOR_EMAIL ,REQUESTOR_NAME ,REQUESTOR_PHONE -- ,RESPONSE_TIME ,ROOM ,SERVICE_PROVIDER ,SERVICE_PROVIDER_ADDRESS ,SERVICE_PROVIDER_CITY ,SERVICE_PROVIDER_CODE ,SERVICE_PROVIDER_COUNTRY ,SERVICE_PROVIDER_CURRENCY ,SERVICE_PROVIDER_DESCRIPTION ,SERV_PROV_DISPATC_HMETHOD ,SERV_PROV_DOUBLE_TIME_RATE ,SERVICE_PROVIDER_EMAIL ,SERV_PROV_EMERGENCY_PHONE ,SERVICE_PROVIDER_FAX_NUMBER ,SERVICE_PROVIDER_HOME_PHONE ,SERVICE_PROVIDER_HOURLY_RATE ,SERVICE_PROVIDER_JOB_TITLE ,SERVICE_PROVIDER_METHOD ,SERVICE_PROVIDER_MOBILE_PHONE ,SERVICE_PROVIDER_PAGER ,SERVICE_PROVIDER_RATES ,SER_PROV_SHIFT_DIFFERENTIAL ,SERV_PROV_STATE_PROVINCE ,SERVICE_PROVIDER_STATUS ,SERV_PROV_WEB_SITE_ADDRESS ,SERVICE_PROVIDER_WORK_PHONE ,SERV_PROV_ZIP_POSTAL_CODE -- ,SHIFT -- ,SKILL ,STATUS ,SUBREGION -- ,TRADE ,VENDOR_ID ,VENDOR_PURCHASING_FAX ,VENDOR_SITECODE ,VENDOR_TICKET ,VENDOR_COMPANYNAME ,VIP ,WORK_ORDER_NO ,WORK_REQUEST ,WORK_REQUEST_CLASS ,WORK_TYPE -- ,WR_COST ,WR_DESCRIPTION -- ,WR_DISPATCH_METHOD ,WR_STATUS ,COUNTRY ,CREATE_DATE ) VALUES (SELECT DISTINCT JT.JT_ID AS JT_ID ,NVL((ROUND((JT_DATE_COMPLETED - JT_DATE_REQUESTED) * 24,2)),0) AS ACTUAL_HRS_TO_COMPLETE ,NVL((ROUND((JT_DATE_RESPONDED - JT_DATE_REQUESTED) * 24,2)),0) AS ACTUAL_HRS_TO_RESPOND ,PEO1.PEO_NAME AS AGENT_NAME ,PEO1.PEO_USER_NAME AS ASAGENT_SOE_ID ,LE.LGLENT_DESC AS AP_SYSTEM -- ,' ' AS ASSIGN_WORK_REQUEST_COMMENT ,DECODE(JT.JT_BILL_ID,138802,'CLIENT BILLABLE' ,138803,'CONTRACTED' ,138804,'INTERNAL BILLABLE',NULL,' ') AS BILLABLE ,BL.BLDG_NAME_CC AS BUILDING ,BL.BLDG_ID_LS AS BUILDING_ID ,DECODE(BL.BLDG_ACTIVE_CC, 'Y', 'ACTIVE', 'INACTIVE') AS BUILDING_STATUS ,DECODE(JT.JT_WRK_CAUSE_ID,141521,'STANDARD WEAR AND TEAR' ,141522,'NEGLIGENCE' ,141523,'ACCIDENTAL' ,141524,'MECHANICAL MALFUNCTION' ,141525,'OVERSIGHT' ,141526,'VANDAL' ,141527,'STANDARD' ,141528,'PROJECT WORK' ,6058229,'TEST',NULL,' ') AS CAUSE_TYPE -- ,' ' AS COMMENTS ,PEO3.PEO_NAME AS COMPLETED_BY ,JT.JT_REQUESTOR_EMAIL AS CONTACT_EMAIL ,JT.JT_REQUESTOR_NAME_FIRST || ' ' ||JT.JT_REQUESTOR_NAME_LAST AS CONTACT_NAME ,JT.JT_REQUESTOR_PHONE AS CONTACT_PHONE ,CC.CSTCTRCD_APCODE AS CORP_CODE ,CC.CSTCTRCD_CODE AS COST_CENTER ,JT.JT_DATE_CLOSED AS DATE_CLOSED ,JT.JT_DATE_COMPLETED AS DATE_COMPLETED ,JT.JT_DATE_REQUESTED AS DATE_REQUESTED ,JT.JT_DATE_RESPONDED AS DATE_RESPONDED ,JT.JT_DATE_RESPONSE_ECD AS DATE_RESPONSE_ECD ,JT.JT_DATE_SCHEDULED AS DATE_SCHEDULED ,DECODE(JT.JT_DEF_ID,139949,'WTG VENDOR RESPONSE' ,139950,'WAITING ON PARTS' ,139951,'LABOR AVAILABILITY' ,139952,'DEFERRED- HI PRI WORK' ,139953,'WTG APPROVAL' ,139954,'FUNDING REQUIRED' ,139955,'ACCESS DENIED' ,139956,'WTG MATERIAL',NULL,' ') AS DEFERRAL_REASON ,JT.JT_DESCRIPTION AS DESCRIPTION ,JT.JT_DATE_RESCHED_ECD AS ECD ,FMG.FACILITY_MANAGER AS FACILITY_MANAGER ,FL.FLOORS_TEXT AS FLOOR ,GL.GENLED_DESC AS GENERAL_LEDGER -- ,' ' AS KIOSK_DATE_REQUESTED -- ,' ' AS KIOSK_DISPATCH_CONFIRMED -- ,' ' AS KIOSK_DISPATCHED ,EQP.EQUIP_CUSTOMER_CODE AS LINKED_EQUIPMENT_ALIAS ,EQP.EQUIP_ID AS LINKED_EQUIPMENT_ID ,EQP.EQUIP_TEXT AS LINKED_EQUIPMENT_NAME ,DECODE(JT_ORIGINATOR_TYPE_ID,1000,'PROJECT MOVE REQUEST' ,138834,'CUSTOMER INITIATED CORRECTION' ,138835,'CUSTOMER INITIATED REQUEST' ,138836,'CORRECTIVE MAINTENANCE' ,138837,'CONFERENCE ROOM BOOKING' ,138838,'PROJECT INITIATED REQUEST' ,138839,'PLANNED PREVENTIVE MAINTENANCE' ,138840,'SELF INITATED REQUEST',NULL,' ') AS ORIGINATOR_TYPE -- ,' ' AS PAYMENT_TERMS ,PRIORITY_TEXT AS PRIORITY_CODE ,SWOTY.SWORKTYPE_TEXT AS PROBLEM_TYPE ,PROP.PROPERTY_NAME_CC AS PROPERTY ,JT.JT_COST_QUOTE_TOTAL AS QUOTE_TOTAL ,PAR.LEVELS_NAME AS REGION ,DECODE(JT.JT_REPDEF_ID,141534,'ADJUSTED SETTING' ,141535,'TRAINING FOR END' ,141536,'NEW REQUEST' ,141537,'NO REPAIR REQUIR' ,141538,'REPLACED PARTS' ,141539,'REPLACE EQUIPMEN' ,1000699,'NEW REQUEST',NULL,' ') AS REPAIR_DEFINITIONS ,JT.JT_REPAIRDESC AS REPAIR_DESCRIPTION ,JT.JT_REQUESTOR AS REQUESTOR -- ,' ' AS REQUESTOR_COST_CENTER ,JT.JT_REQUESTOR_EMAIL AS REQUESTOR_EMAIL ,JT.JT_REQUESTOR_NAME_FIRST AS REQUESTOR_NAME ,JT.JT_REQUESTOR_PHONE AS REQUESTOR_PHONE -- ,' ' AS RESPONSE_TIME ,RM.ROOM_NAME_CC AS ROOM ,P1.PEO_PROVIDER_CODE1 AS SERVICE_PROVIDER ,P1.PEO_ADDRESS_1 AS SERVICE_PROVIDER_ADDRESS ,PEOCITY.CITY_TEXT SERVICE_PROVIDER_CITY ,P1.PEO_PROVIDER_CODE1 AS SERVICE_PROVIDER_CODE ,PEOCITY.CITY_COUNTRY_NAME AS SERVICE_PROVIDER_COUNTRY ,PEOCUR.CURRENCY_TEXT AS SERVICE_PROVIDER_CURRENCY ,P1.PEO_NAME AS SERVICE_PROVIDER_DESCRIPTION ,P1.PEO_DISPATCH_METHOD AS SERV_PROV_DISPATC_HMETHOD ,P1.PEO_RATE_DOUBLE AS SERV_PROV_DOUBLE_TIME_RATE ,P1.PEO_EMAIL AS SERVICE_PROVIDER_EMAIL ,P1.PEO_EMERGENCY_PHONE AS SERV_PROV_EMERGENCY_PHONE ,P1.PEO_FAX AS SERVICE_PROVIDER_FAX_NUMBER ,P1.PEO_HOME_PHONE AS SERVICE_PROVIDER_HOME_PHONE ,P1.PEO_RATE_HOURLY AS SERVICE_PROVIDER_HOURLY_RATE ,P1.PEO_TITLE AS SERVICE_PROVIDER_JOB_TITLE ,P1.PEO_METHOD_ID AS SERVICE_PROVIDER_METHOD ,P1.PEO_CELL_PHONE AS SERVICE_PROVIDER_MOBILE_PHONE ,P1.PEO_PAGER AS SERVICE_PROVIDER_PAGER ,P1.PEO_RATE_DIFFERENTIAL AS SERVICE_PROVIDER_RATES ,P1.PEO_RATE_DIFFERENTIAL AS SER_PROV_SHIFT_DIFFERENTIAL ,PEOCITY.CITY_STATE_PROV_TEXT AS SERV_PROV_STATE_PROVINCE ,DECODE(P1.PEO_ACTIVE, 'Y', 'ACTIVE', 'INACTIVE') AS SERVICE_PROVIDER_STATUS ,P1.PEO_URL AS SERV_PROV_WEB_SITE_ADDRESS ,P1.PEO_PHONE AS SERVICE_PROVIDER_WORK_PHONE ,P1.PEO_POSTAL_CODE AS SERV_PROV_ZIP_POSTAL_CODE -- ,' ' AS SHIFT -- ,' ' AS SKILL ,DECODE(JT.JT_BIGSTATUS_ID,138813,'NEW' ,138814,'PENDING' ,138815,'OPEN' ,138816,'COMPLETED' ,138817,'CLOSED' ,138818,'CANCELLED',NULL,' ') AS STATUS ,LEV.LEVELS_NAME AS SUBREGION -- ,' ' AS TRADE ,P1.PEO_LS_INTERFACE_CODE1 AS VENDOR_ID ,P1.PEO_FAX AS VENDOR_PURCHASING_FAX ,P1.PEO_VENDOR_SITE_CODE AS VENDOR_SITECODE ,JT.JT_ID AS VENDOR_TICKET ,P1.PEO_NAME AS VENDOR_COMPANYNAME ,JT.JT_REQUESTOR_VIP AS VIP ,WO.WO_ID AS WORK_ORDER_NO ,JT.JT_ID AS WORK_REQUEST ,JT.JT_CLASS_ID AS WORK_REQUEST_CLASS ,WOTY.WORKTYPE_TEXT AS WORK_TYPE -- ,' ' AS WR_COST ,JT.JT_DESCRIPTION AS WR_DESCRIPTION -- ,' ' AS WR_DISPATCH_METHOD ,DECODE(JT.JT_BIGSTATUS_ID,138813,'NEW' ,138814,'PENDING' ,138815,'OPEN' ,138816,'COMPLETED' ,138817,'CLOSED' ,138818,'CANCELLED',NULL,' ') AS WR_STATUS ,CTRY.COUNTRY_NAME AS COUNTRY ,SYSDATE --LD_CURR_TIME FROM CITI.JOBTICKET JT, CITI.PROPERTY PROP, CITI.BLDG BL, CITI.BLDG_LEVELS BLDGLVL, CITI.LEVELS LEV, CITI.LEVELS PAR, (SELECT CRSTOOLS.STRAGG(PEO_NAME) FACILITY_MANAGER, BLDGCON_BLDG_ID FROM CITI.BLDG_CONTACTS, CITI.PEOPLE WHERE BLDGCON_PEO_ID = PEO_ID AND BLDGCON_CONTYPE_ID IN (40181, 10142) GROUP BY BLDGCON_BLDG_ID) FMG, CITI.FLOORS FL, CITI.ROOM RM, CITI.GENERAL_LEDGER GL, CITI.LEGAL_ENTITY LE, CITI.COST_CENTER_CODES CC, CITI.EQUIPMENT EQP, CITI.WORKTYPE WOTY, CITI.SUBWORKTYPE SWOTY, CITI.WORK_ORDER WO, CITI.JT_WORKERS JTWO, CITI.PRIORITY, CITI.COUNTRY CTRY, CITI.PEOPLE P1, CITI.PEOPLE PEO3, CITI.PEOPLE PEO1, CITI.CITY PEOCITY, CITI.CURRENCY PEOCUR WHERE JT.JT_BLDG_ID = BL.BLDG_ID AND BL.BLDG_ID = BLDGLVL.BLDG_LEVELS_BLDG_ID AND BLDGLVL.BLDG_LEVELS_LEVELS_ID = LEV.LEVELS_ID AND LEV.LEVELS_PARENT = PAR.LEVELS_ID(+) AND PROP.PROPERTY_ID = BL.BLDG_PROPERTY_ID AND BL.BLDG_ACTIVE_LS = 'N' AND JT.JT_FLOORS_ID = FL.FLOORS_ID(+) AND JT.JT_ROOM_ID = RM.ROOM_ID(+) AND JT.JT_BLDG_ID = FMG.BLDGCON_BLDG_ID(+) AND JT.JT_GENLED_ID = GL.GENLED_ID(+) AND GL.GENLED_LGLENT_ID = LE.LGLENT_ID(+) AND JT.JT_CSTCTRCD_ID = CC.CSTCTRCD_ID(+) AND JT.JT_EQUIP_ID = EQP.EQUIP_ID(+) AND JT.JT_ID = JTWO.JTW_JT_ID(+) AND JT.JT_WORKTYPE_ID = WOTY.WORKTYPE_ID(+) AND JT.JT_SWORKTYPE_ID = SWOTY.SWORKTYPE_ID(+) AND JT.JT_WO_ID = WO.WO_ID AND JT.JT_PRIORITY_ID = PRIORITY_ID(+) --AND jt.jt_date_requested >= ADD_MONTHS (SYSDATE, -12) AND JT.JT_LAST_UPDATE >= ADD_MONTHS(LD_CURR_TIME, -12) AND BL.BLDG_COUNTRY_ID = CTRY.COUNTRY_ID AND JTWO.JTW_PEO_ID = P1.PEO_ID(+) AND P1.PEO_CITY_ID = PEOCITY.CITY_ID(+) AND JT.JT_COMPLETED_BY_PEO_ID = PEO3.PEO_ID(+) AND P1.PEO_RATE_CURRENCY_ID = PEOCUR.CURRENCY_ID(+) AND JT.JT_AGENT_PEO_ID = PEO1.PEO_ID(+) ); COMMIT; EXCEPTION WHEN OTHERS THEN ROLLBACK; DBMS_OUTPUT.PUT_LINE('SQLCODE :' || SQLCODE || ' Error :' || SQLERRM); END WORK_KIOSK_FULL;
Here is the link for infor the [Oracle Direct - Path INSERT | http://download.oracle.com/docs/cd/B10501_01/server.920/a96524/c21dlins.htm#10778].
Also, if you are really wanting to use a CURSOR for LOOP COLLECTION in BULK, I suggest you read the article by Steven Feuerstein [PL/SQL practices: GEM VRAC | http://www.oracle.com/technology/oramag/oracle/08-mar/o28plsql.html].
I hope this helps.
Craig...If my response or response from another person was helpful, please mark accordingly
-
make exception when using BUlk collect
Hi all
version of DB 10 g
I've written a procedure as below
now, I tried to perform the procedure belowcreate or replace procedure test_proc2 is type v_emp_rec is record (empno number, ename varchar2 (200)); type v_emp_tab is table of v_emp_rec index by binary_integer; v_tab v_emp_tab; begin select empno,ename into v_tab(0) from emp where empno = 7369; dbms_output.put_line (v_tab(0).ename); exception when no_data_found then dbms_output.put_line ('I am in no data found exception'); end;
the foregoing is works well, but I want to use the functionality of collection in bulk so I use as belowbegin test_proc2; end;
the foregoing gives me exception, please someone can explain why it is not in the exception block.create or replace procedure test_proc2 is type v_emp_rec is record (empno number, ename varchar2 (200)); type v_emp_tab is table of v_emp_rec index by binary_integer; v_tab v_emp_tab; begin select empno,ename bulk collect into v_tab from emp where empno = 7369; dbms_output.put_line (v_tab(0).ename); exception when no_data_found then dbms_output.put_line ('I am in no data found exception'); end;
Thanks in advance.The obvious answer is because an exception no_data_found is raised.
The question is there.It's either select it because there is no data where empno = 7369.
Or is the .ename of v_tab (0), because there is no element 0. Automatic collection of indexing starts at 1.
for example
SQL> declare 2 type t1 is table of pls_integer index by pls_integer; 3 v1 t1; 4 begin 5 v1(1) := 1; 6 dbms_output.put_line(v1(0)); 7 end; 8 / declare * ERROR at line 1: ORA-01403: no data found ORA-06512: at line 6 SQL>
If you catch the exceptions and do not spread them properly, then hide you all information kind of useful as a line number, etc..
-
iHi.
Declare cursor c_1 is select col1,col2,col3,col4 from table1 type t_type is table of c_1%rowtype index by binary_integer; v_data t_type; BEGIN OPEN c_1; LOOP FETCH c_1 BULK COLLECT INTO v_data LIMIT 200; EXIT WHEN v_data.COUNT = 0; FORALL i IN v_data.FIRST .. v_data.LAST INSERT INTO xxc_table (col1, col3, col4 ) SELECT v_data (i).col1, v_data (i).col3, v_data (i).col4 FROM DUAL WHERE NOT EXISTS (SELECT 1 FROM xxc_table a WHERE col1=col1 ..... ); --commit; INSERT INTO xxc_table1 (col1, col2, col3, col4 ) SELECT v_data (i).col1, v_data (i).col2, v_data (i).col3, 'Y' FROM DUAL WHERE NOT EXISTS (SELECT 1 FROM xxc_table1 a WHERE col1=col1 ..... ); --exit when c_1%notfound; END LOOP; CLOSE c_1; commit; END;
I get 40/28-PLS-00201: identifier 'I' must be declared what the problem in the above code please help me and I have lakhs of data
Thank you
Post edited by: Rajesh123 I changed IDX
Post edited by: Rajesh123 changed t_type c_1 in Fetch
But by using a SET of INSERT to insert into two tables at once in the same query would do the job without any collection of bulk of PL and avoid to query two times too.
for example, as a single INSERT...
SQL > create table table1 as
2. Select 1 as col1, col2 of 1, 1 as col3, 1 as col4 Union double all the
3 select 2,2,2,2 of all the double union
4 Select 3,3,3,3 Union double all the
5 Select 4,4,4,4 of all the double union
6 select 5,5,5,5 of all the double union
7 select 6,6,6,6 of all the double union
8 select 7,7,7,7 of all the double union
9 select 8,8,8,8 of all the double union
10. Select 9,9,9,9 to the Union double all the
11. Select double 10,10,10,10
12.Table created.
SQL > create table xxc_table like
2. Select 1 as col1, col3 2, 3 as col4 Union double all the
3. Select the 3, 4, 5 Union double all the
4. Select the 5, 6, 7 double
5.Table created.
SQL > create table xxc_table1 like
2. Select 3 as col1, col2, col3, 5 4 "n" as col4 Union double all the
3. Select the 6, 7, 8, double "n"
4.Table created.
SQL > insert all
2 when the xt_insert is null then
3 in xxc_table (col1, col3, col4)
4 values (col1, col3, col4)
5 when the xt1_insert is null then
6 in xxc_table1 (col1, col2, col3, col4)
7 values (col1, col2, col3, 'Y')
8. Select t1.col1 t1.col2, t1.col3, t1.col4
9, xt.col1 as xt_insert
10, xt1.col1 as xt1_insert
11 from table1 t1
12 left join external xxc_table xt (t1.col1 = xt.col1)
13 left xt1 xxc_table1 outer join (t1.col1 = xt1.col1)
14.15 rows created.
SQL > select * from xxc_table by 1.
COL1 COL3 COL4
---------- ---------- ----------
1 2 3
2 2 2
3 4 5
4 4 4
5 6 7
6 6 6
7 7 7
8 8 8
9 9 9
10-10-1010 selected lines.
SQL > select * from xxc_table1 by 1.
COL1 COL2 COL3 C
---------- ---------- ---------- -
1 1 1 Y
2 2 2 Y
3 4 5 N
4 4 4 Y
5 5 5 Y
6 7 8 N
7 7 7 Y
8 8 8 Y
9 9 9 Y
10-10-1010 selected lines.
SQL >
-
Hi all
I want to know if using bulk collect into limit will help to avoid the TEMP tablespace error run out.
We use Oracle 11 g R1.
I am assigned to a task of creating journal facilitated for all tables in a query of the APEX.
I create procedures to execute some sql statements to create a DEC (Create table select), and then fires on these tables.
We have about three tables with more than 26 million records.
It seems very well running until we reached a table with more than 15 million record, we got an error says that Miss tablespace TEMP.
I googled on this topic and retrieve the tips:
Use NO LOG
Parallel use
BULK COLLECT INTO limited
However, the questions for those above usually short-term memory rather than running out of TEMPORARY tablespace.
I'm just a junior developer and does not have dealed with table more than 10 million documents at a time like this before.
The database support is outsourced. If we try to keep it as minimal contact with the DBA as possible. My Manager asked me to find a solution without asking the administrator to extend the TEMP tablespace.
I wrote a few BULK COLLECT INTO to insert about 300,000 like once on the development environment. It seems.
But the code works only against a 000 4000 table of records. I am trying to add more data into the Test table, but yet again, we lack the tablespace on DEV (this time, it's a step a TEMP data)
I'll give it a go against the table of 26 million records on the Production of this weekend. I just want to know if it is worth trying.
Thanks for reading this.
Ann
I really need check that you did not have the sizes of huge line (like several K by rank), they are not too bad at all, which is good!
A good rule of thumb to maximize the amount of limit clause, is to see how much memory you can afford to consume in the PGA (to avoid the number of calls to the extraction and forall section and therefore the context switches) and adjust the limit to be as close to that amount as possible.
Use the routines below to check at what threshold value would be better suited for your system because it depends on your memory allocation and CPU consumption. Flexibility, based on your limits of PGA, as lines of length vary, but this method will get a good order of magnitude.
CREATE OR REPLACE PROCEDURE show_pga_memory (context_in IN VARCHAR2 DEFAULT NULL)
IS
l_memory NUMBER;
BEGIN
SELECT st. VALUE
IN l_memory
SYS.v_$ session se, SYS.v_$ sesstat st, SYS.v_$ statname nm
WHERE se.audsid = USERENV ('SESSIONID')
AND st.statistic # nm.statistic = #.
AND themselves. SID = st. SID
AND nm.NAME = 'pga session in memory. "
Dbms_output.put_line (CASE
WHEN context_in IS NULL
THEN NULL
ELSE context_in | ' - '
END
|| 'Used in the session PGA memory ='
|| To_char (l_memory)
);
END show_pga_memory;
DECLARE
PROCEDURE fetch_all_rows (limit_in IN PLS_INTEGER)
IS
CURSOR source_cur
IS
SELECT *.
FROM YOUR_TABLE;
TYPE source_aat IS TABLE OF source_cur % ROWTYPE
INDEX BY PLS_INTEGER;
l_source source_aat;
l_start PLS_INTEGER;
l_end PLS_INTEGER;
BEGIN
DBMS_SESSION.free_unused_user_memory;
show_pga_memory (limit_in |) "- BEFORE"); "."
l_start: = DBMS_UTILITY.get_cpu_time;
OPEN source_cur.
LOOP
EXTRACTION source_cur
LOOSE COLLECTION l_source LIMITED limit_in;
WHEN l_source EXIT. COUNT = 0;
END LOOP;
CLOSE Source_cur;
l_end: = DBMS_UTILITY.get_cpu_time;
Dbms_output.put_line (' elapsed time CPU for limit of ')
|| limit_in
|| ' = '
|| To_char (l_end - l_start)
);
show_pga_memory (limit_in |) "- AFTER");
END fetch_all_rows;
BEGIN
fetch_all_rows (20000);
fetch_all_rows (40000);
fetch_all_rows (60000);
fetch_all_rows (80000);
fetch_all_rows (100000);
fetch_all_rows (150000);
fetch_all_rows (250000);
-etc.
END;
-
change a pl/sql block using "bulk collect.
Hello
I have a pl/sql block, short it slows...
DECLARE
CURSOR CURUPDATE1 IS
SELECT MF_TJ. UID_LO
OF MF_TJ
WHERE MF_TJ. DTYP (SELECT CD
OF MF_DOC_TYPE
WHERE MF_DOC_TYPE. DTYP_CAT = 'xx')
AND MF_TJ. LINE_TYP IS SET TO NULL;
BEGIN
FOR T IN CURUPDATE1
LOOP
UPDATE MF_TJ
THE MF_TJ VALUE. LINE_TYP = "NR."
WHERE MF_TJ. UID_LO = T.UID_LO;
UPDATE MF_AJ
THE MF_AJ VALUE. LINE_TYP = "NR."
WHERE MF_AJ. TJ_UID_LO = T.UID_LO;
END LOOP;
END;
/
now I change to use bulk collect, but I split it into two pl/sql blocks (each for an update)
DECLARE
CURSOR CURUPDATE1 IS
SELECT MF_TJ. UID_LO
OF MF_TJ
WHERE MF_TJ. DTYP (SELECT CD
OF MF_DOC_TYPE
WHERE MF_DOC_TYPE. DTYP_CAT = 'xx')
AND MF_TJ. LINE_TYP IS SET TO NULL;
TYPE of recs_type IS the TABLE OF CURUPDATE1% ROWTYPE directory INDEX;
REB recs_type;
BEGIN
CURUPDATE1 OPEN;
Go SEARCH the CURUPDATE1 COLLECT in BULK IN REB 8000 limit;
CLOSE CURUPDATE1;
FORALL i IN 1.recs. COUNTY
UPDATE MF_TJ
THE MF_TJ VALUE. LINE_TYP = "NR."
WHERE MF_TJ. UID_LO = (i) recs. UID_LO;-END;
/
DECLARE
CURSOR CURUPDATE1 IS
SELECT MF_TJ. UID_LO
OF MF_TJ
WHERE MF_TJ. DTYP (SELECT CD
OF MF_DOC_TYPE
WHERE MF_DOC_TYPE. DTYP_CAT = 'xx')
AND MF_TJ. LINE_TYP IS SET TO NULL;
TYPE of recs_type IS the TABLE OF CURUPDATE1% ROWTYPE directory INDEX;
REB recs_type;
BEGIN
CURUPDATE1 OPEN;
Go SEARCH the CURUPDATE1 COLLECT in BULK IN REB 8000 limit;
CLOSE CURUPDATE1;
FORALL i IN 1.recs. COUNTY
UPDATE MF_AJ
THE MF_AJ VALUE. LINE_TYP = "NR."
WHERE MF_AJ. TJ_UID_LO = (i) recs. UID_LO;-
END;
/Is there a way I can just use pl/sql block using bulk collect?
Thank you very much
Hi 5181139
As Paulzip and Jarkko Turpeinen have pointed out, you could do it using only SQL...
This is a course using COLLECT in BULK:
DECLARE blimit CONSTANT PLS_INTEGER := 500; CURSOR curupdate1 IS SELECT MF_TJ.UID_LO FROM MF_TJ WHERE MF_TJ.DTYP IN (SELECT CD FROM MF_DOC_TYPE WHERE MF_DOC_TYPE.DTYP_CAT = 'xx') AND MF_TJ.LINE_TYP IS NULL; TYPE c_arr IS TABLE OF curupdate1%ROWTYPE; c_rows c_arr; BEGIN OPEN curupdate1; LOOP FETCH curupdate1 BULK COLLECT INTO c_rows LIMIT blimit; FORALL i IN c_rows.FIRST..c_rows.LAST UPDATE MF_TJ SET MF_TJ.LINE_TYP = 'NR' WHERE MF_TJ.UID_LO = c_rows(i).uid_lo; FORALL i IN c_rows.FIRST..c_rows.LAST UPDATE MF_AJ SET MF_AJ.LINE_TYP = 'NR' WHERE MF_AJ.TJ_UID_LO = c_rows(i).uid_lo; EXIT WHEN c_rows.COUNT < blimit; END LOOP; CLOSE curupdate1; END;
See you soon,.
Gas
-
Msg of error taken in bulk collect?
Hello
In bulk below collect part i m having error of date code (i.e. cm_date = 12/12 k 2001 due to the issue of data).
So how can I catch exception msg bulk collect?
Can I use bulk collect as FORALL?
--------------------------------------------------------------------------
BECAUSE me in 1... % BULK_EXCEPTIONS SQL. COUNTY
LOOP
DBMS_OUTPUT. Put_line (' error :'||) SQLERRM (-SQL % BULK_EXCEPTIONS (i).) ERROR_CODE));
END LOOP;
--------------------------------------------------------------------------
looking at the o/p its only "str1" printing and the msg of error ora-01841
----------------------------------------------------------------------------------------------------------------
{
declare
VAR_TYP TYPE IS VARRAY (32767) OF VARCHAR2 (32767).
V_CASL_CM_DATE VAR_TYP;
Start
DBMS_OUTPUT. Put_line ('str 1');
Start
SELECT TO_DATE (casl. CM_DATE, "DD/MM/YYYY")
TO COLLECT FEES IN BULK
IN V_CASL_CM_DATE
The left outer JOIN of the DBMG_CM_A_STL-casl
B CO_CNY on B.CD_CNY_ISO = NVL (casl. Curr_Code, "AED")
WHERE casl. CM_NUMBER = 4203884;
EXCEPTION
WHILE OTHERS THEN
Tr_Ltm_Tnd_Err_Cnt: = Tr_Ltm_Tnd_Err_Cnt + SQL % BULK_EXCEPTIONS. COUNTY;
DBMS_OUTPUT. Put_line (' error: unexpected loading of SAL_DETL to Tr_Ltm_Tnd: ' |) SQLERRM);
BECAUSE me in 1... % BULK_EXCEPTIONS SQL. COUNTY
LOOP
DBMS_OUTPUT. Put_line (' error :'||) SQLERRM (-SQL % BULK_EXCEPTIONS (i).) ERROR_CODE));
END LOOP;
END;
DBMS_OUTPUT. Put_line ('str 2');
BEGIN
FORALL V_CASL_CM_DATE case. FIRST... V_CASL_CM_DATE. FINALLY SAVE THE EXCEPTIONS
INSERT INTO Tr_Ltm_Tnd
VALUES (V_CASL_CM_DATE (case),
);
Tr_Ltm_Tnd_Cnt: = Tr_Ltm_Tnd_Cnt + N_CASL_CM_NUMBER. COUNTY;
EXCEPTION
WHILE OTHERS THEN
Tr_Ltm_Tnd_Err_Cnt: = Tr_Ltm_Tnd_Err_Cnt + SQL % BULK_EXCEPTIONS. COUNTY;
Sqlerm: = SUBSTR (sqlerrm, 1, 200);
DBMS_OUTPUT. Put_line (' error: unexpected loading of SAL_DETL to Tr_Ltm_Tnd: ' |) Sqlerm);
BECAUSE me in 1... % BULK_EXCEPTIONS SQL. COUNTY
LOOP
DBMS_OUTPUT. Put_line (' error :'||) SQLERRM (-SQL % BULK_EXCEPTIONS (i).) ERROR_CODE));
END LOOP;
END;
end;
}
----------------------------------------------------------------------------------------------------------------
Rgds,
PCSame error 10 times?
Depends on what you mean.
You should get an exception recorded for each exception.
The collections are actually reset each outer loop.
Index numbers (i in this case) will be recycled for each loop.
So if the indexed collection value wrong 3 in the first loop, no you wouldn't not see that in following loop unless it was a different error. -
Receive the 25 (Null) error when using Flightsimulator FSX
Receive the 25 (Null) error when using Flightsimulator FSX
Hello
Try to open the it to start - all programs - Games - Games Explorer, and then clicking the icon FSX.
A disk error of 25 means that the program cannot read your disk reading. Either the disc is scratch, dirty or defective. If you need another drive, or you can try it on another computer. The message of Visual elements of Vista is not serious. Vista will automatically your screen to a basic compatible mode when the application is launched. However, it seems that your game is a failure due to the disk error and not the Vista display problem. Try to clean the disc and see if that helps.
Last resort, it seems you'd have to do a complete uninstall and reinstall FSX.
Cheers!
-
dbms_crypto - avoid error when using different key in lower environment
Hello Experts,
We use Oracle 11.2.0.2. We intend to implement dbms_crypto to encrypt some columns. Clone us the production data at the lower environment (DEV, QC).
The lowest environments, we do not want to obtain the sensitive data from production and do not plan to use the same key. Instead of getting an error when using different keys, is it possible to get a different set of results.
In other words, we want the implementation will be same in environments but use a different key in lower environment and obtain different results (or garbage).
Any suggestions would be greatly appreciated.
The test of this logic, I get following error when using the different keys to decrypt. It works fine if I use the same key.
Error on line 1
ORA-28817: PL/SQL function has returned an error.
ORA-06512: at "SYS." DBMS_CRYPTO_FFI', line 67
ORA-06512: at "SYS." DBMS_CRYPTO", line 44
ORA-06512: at line 19
Thank you.DECLARE l_credit_card_no VARCHAR2(19) := '1234 5678 9012 3456'; l_ccn_raw RAW(128) := UTL_RAW.cast_to_raw(l_credit_card_no); l_key RAW(128) := UTL_RAW.cast_to_raw('abcdefgh'); l2_key RAW(128) := UTL_RAW.cast_to_raw('12345678'); l_encrypted_raw RAW(2048); l_decrypted_raw RAW(2048); BEGIN DBMS_OUTPUT.put_line('Original : ' || l_credit_card_no); l_encrypted_raw := DBMS_CRYPTO.encrypt(src => l_ccn_raw, typ => DBMS_CRYPTO.des_cbc_pkcs5, key => l_key); DBMS_OUTPUT.put_line('Encrypted : ' || RAWTOHEX(UTL_RAW.cast_to_raw(l_encrypted_raw))); l_decrypted_raw := DBMS_CRYPTO.decrypt(src => l_encrypted_raw, typ => DBMS_CRYPTO.des_cbc_pkcs5, key => l2_key); --**Using different key to decrypt DBMS_OUTPUT.put_line('Decrypted : ' || UTL_RAW.cast_to_varchar2(l_decrypted_raw)); END;
In general, you can't get different results in different environments, no.
Of course, you could write your routine to decrypt so that it intercepts it and returns a random string of RAW.
However, this is not normally the way people go on hiding sensitive data in environments below. It would be much more common to use a tool that is designed for this tool. For example, Oracle has a Pack of masking of data for Enterprise Manager that allows to replace sensitive data with false, but realistic data as part of the updating of the environments below. There are also data from third-party tools like masqueur datamasking.
Justin
-
Error using BULK collect with RECORD TYPE
Hello
I wrote a simple procedure to declare a record type & then by a variable of type NESTED table.
I then selects the data using COLLECT in BULK & trying to access it via a LOOP... We get an ERROR.
------------------------------------------------------------------------------------------------------------------------------------------------------
CREATE OR REPLACE PROCEDURE sp_test_bulkcollect
IS
TYPE rec_type () IS RENDERING
emp_id VARCHAR2 (20).
level_id NUMBER
);
TYPE v_rec_type IS TABLE OF THE rec_type;
BEGIN
SELECT employe_id, level_id
LOOSE COLLECTION v_rec_type
OF portfolio_exec_level_mapping
WHERE portfolio_execp_id = 2851852;
FOR indx IN v_rec_type. FIRST... v_rec_type. LAST
LOOP
dbms_output.put_line ('Emp-' | v_rec_type.emp_id (indx) |) » '|| v_rec_type.level_id (indx));
END LOOP;
END;
-----------------------------------------------------------------------------------------------------------------------------------
Here is the ERROR I get...
-Errors of compilation for the PROCEDURE DOMRATBDTESTUSER. SP_TEST_BULKCOLLECT
Error: PLS-00321: expression "V_REC_TYPE" is not appropriate for the left side of an assignment statement
Online: 15
Text: IN portfolio_exec_level_mapping
Error: PL/SQL: ORA-00904: invalid identifier
Online: 16
Text: WHERE portfolio_execp_id = 2851852;
Error: PL/SQL: statement ignored
Line: 14
Text: COLLECT LOOSE v_rec_type
Error: PLS-00302: component 'FIRST' must be declared
Online: 19
Text: LOOP
Error: PL/SQL: statement ignored
Online: 19
Text: LOOP
------------------------------------------------------------------------------------------------
Help PLZ.and with a complete code example:
SQL> CREATE OR REPLACE PROCEDURE sp_test_bulkcollect 2 IS 3 TYPE rec_type IS RECORD ( 4 emp_id VARCHAR2(20), 5 level_id NUMBER 6 ); 7 TYPE v_rec_type IS TABLE OF rec_type; 8 v v_rec_type; 9 BEGIN 10 SELECT empno, sal 11 BULK COLLECT INTO v 12 FROM emp 13 WHERE empno = 7876; 14 FOR indx IN v.FIRST..v.LAST 15 LOOP 16 dbms_output.put_line('Emp -- '||v(indx).emp_id||' '||v(indx).level_id); 17 END LOOP; 18 END; 19 / Procedure created. SQL> SQL> show error No errors. SQL> SQL> begin 2 sp_test_bulkcollect; 3 end; 4 / Emp -- 7876 1100 PL/SQL procedure successfully completed.
-
In Oracle 10 g error when using COLLECT
I get the error when you use collect in 10g
SQL > ed
A written file afiedt.buf
1. SELECT deptno
2, COLLECT (ename) AS PGE
3 FROM emp
GROUP 4 BY
5 * deptno
SQL > /.
COLLECT (ename) AS PGE
*
ERROR on line 2:
ORA-00932: inconsistent data types: expected NUMBER obtained -
Please give me the solution.you use the old version of SQL * more. If you use the later version, it will give you correct the result.
Published by: ūnōrum on March 14, 2010 04:25
-
WCF error when using the API of VSM
VSM 9.1.4
Oracle 10g R2
I am attemtping to use the "MessageSendMessage" command in the VSM API to send back the client permissions and I get the following error message when running it from the VSM server.
ERROR: The operation 'ContractUnlinkCIAsync' cannot be loaded because it has a parameter or type System.ServiceModel.Channels.Message or a type that has the MessageContractAttribute and other parameters of different types of return. When using System.ServiceModel.Channels.Message or types with MessageContractAttribute, the method should not use other types of settings.
It's an odd error because I do not use the "ContractUnlinkCI" command which tells me that there is a problem with the generation of the class file.
I ran the following command to generate my config file and the class in the directory "C:\Program Files (x 86) \Microsoft 4.0 Tools":
Svcutil t:code /MessageContract. [URL ServiceManager.svc] / out: ISMAPI.cs /config:ISMAPI.config
The class files and generated config ok. Then I copied the game config to the Web site's web.config file:
< system.serviceModel >
< links >
< basicHttpBinding >
< connection name = "BasicHttpBinding_IServiceManager" / >
< / basicHttpBinding >
< / links >
< customer >
< endpoint address = "[ServiceManager.svc URL]" binding = "basicHttpBinding" bindingConfiguration = contract "BasicHttpBinding_IServiceManager" = "IServiceManager" name = "BasicHttpBinding_IServiceManager" / >
< / customer >
< system.serviceModel >
I put the ISMAPI.cs file in the App_Code to my site folder:
My code works fine when I run locally and include the correct querystring values, but it returns the error above, when I run the code from the VSM server. The query string I used: default.aspx? ajaxfunction = 2 & tasknumber = 425134 & agent = 2370 & recvofficer = 2370
using System;
using System.Collections.Generic;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Data;
using Oracle.DataAccess.Client;
using Oracle.DataAccess.Types;
using System.Runtime.Serialization;
using System.ServiceModel;partial class _Default: System.Web.UI.Page
{
Protected Sub Page_Load (object sender, EventArgs e)
{
Response.Expires = - 1;
Response.ContentType = "text/plain";
If (Request.QueryString ["ajaxfunction"]! = null)
{
Try
{
Int16 intFunction = Int16.Parse (Request.QueryString ["ajaxfunction"]. (ToString());
Switch (intFunction)
{
case 1:
If (Request.QueryString ["tasknumber"]! = null)
{
Int64 intTaskNumber = Int64.Parse (Request.QueryString ["tasknumber"]. (ToString());
Response.Write (getTaskApprovalComments (intTaskNumber.ToString ()));
}
break;
case 2:
If (Request.QueryString ["tasknumber"]! = null & & Request.QueryString ["officer"]! = null & & Request.QueryString ["recvofficer"]! = null)
{
MessageRequest load = new MessageRequest();
inStruct.sLoginUserID = System.Configuration.ConfigurationManager.AppSettings ["apiLogin"];
inStruct.sLoginPassword = System.Configuration.ConfigurationManager.AppSettings ["apiPassword"];
inStruct.sDatabase = System.Configuration.ConfigurationManager.AppSettings ["apiDatabase"];
inStruct.eEntityType = CRTEntityForEmail.Task;
inStruct.nEntityRef = Int32.Parse (Request.QueryString ["tasknumber"]);
inStruct.ePriority = MailPriority.Normal;
inStruct.eMMAMessageType = MessageMMAType.Approval;
inStruct.nMessageType = 130;
inStruct.lRecipientRef = ' ~ ' + Request.QueryString ["recvofficer"];
inStruct.eRecipientType = MessageRecipientType.Person;
inStruct.bEmail = true;
MessageResponse outStruct = new MessageResponse();
SMC ServiceManagerClient = new ServiceManagerClient();
outStruct = SCM. MessageSendMessage (inStruct);
Response.Write (outStruct.sMessage);
}
break;
by default:
Response.Write ("ERROR: invalid function!");
break;
}
}
catch (System.Exception Exception)
{
Response.Write ("ERROR:" + exception.) (Message);
}
}
Response.End ();
}I hope one of the other directors VSM has met this problem and knows a solution. I tried Googling this issue but with my knowledge of WCF, I don't know what I'm looking at. I also tried commenting on the problem area in the ISMAPI.cs file but it gives me an other errors so I obviously don't know what I'm doing.
Thank you.
If locally it works fine I guess you should compare the versions of .net framework assigned to your web applications (application pool), and all the parameters specified in the web.config file.
-
Tecra 8100 system error when using Bank B
Hello
I get Bluscreens and system errors when you use Bank B. When you use Module1 in the Bank, everything is ok. When the same module as Bank A Bank (Bank A + B) b, I get errors.
So, what would it be? What I have to 'turn on' the use of BANK B anywhere or not it looks like its defekt?
Thanks for any help
Hello
Well, you must replace the motherboard if the memory bank has a defect. In this case, the only good way to connect with the service partner. They might give you detailed information.
Good bye
-
unknown error when using vi express daq devices
Hi there I have unknown error when you try to use express DAQ of VI. I downloaded and installed device drivers OR who needed to generate EXE since then this problem was occurring what should I do I've done everything that has been mentioned in the following thread
(http://forums.ni.com/ni/board/message?board.id=170&message.id=336246&query.id=2154746#M336246), but no use, I'm not able to understand the problem can someone help me.
Hi david thank you for everything my problem is solved by formatting the c drive that was the only solution... Thanks anyway bye...
-
Hello
I just moved a set of applications on a new server running Oracle 12 c and APEX 4.2.6.00.03, applications where initially on Oracle 10 G database with APEX 3.2.
When you access via IE 11 users receive the error message after, when it appears that the only way to clear it is to close IE and reopen the application.
There is an application that uses a database to MYSQL link, but the error when you use applications that do not use the link, so I'm not sure how to solve the problem.
The error does not appear when you access applications through Chrome, but not all users have installed chrome.
Thank you
Ronnie
Well Ronnie,
This thread suppose to have a problem like yours and resolved. Please try on your side:
After the footer I use: dbms_session.close_database_link ('mysql_databaselink_name');
Please Urgent help on ora_sqlcode :-28500
It will be useful.
Thank you
Sunil Bhatia
Maybe you are looking for
-
U920T satellite screen has stopped working
The screen has stopped working on a relatively new U920t. It displays second screen on the TV, but the actual screen shines in computer mode not all laptop or tablet. Any help in this matter would be appreciated.
-
Toshiba Canvio fail to mount after a month
Hi guys,. I have Toshiba Canvio 3T (HDWC130EK3J1) and it worked fine for a month. Now, it will fail to mount. I read on some forums that it could be a power issue. I have USB 2.0 and perhaps need a "cable Toshiba y." I do not understand if I was usin
-
I tried to install the update several times, but I get the same error every time ' encountered error 80070003 while trying to install the update of security for Windows 7 for x 64-based systems (KB2286198). I tried to use products different a.v. to s
-
How to uninstall a Live CD?
In vain, I installed an OS Live CD written in Linux, Ubuntu with my Windows XP. My ASUS A8S has now two additional unknown partitions, 47,69 and 2,00 GB respectively. They are both in good condition, indicated by the computer, but I can not connect t
-
How do I change the duration of an image in movie maker
I can't understand how do!