unknown error when using vi express daq devices

Similar Questions

• Premiere Pro CC 2015 export: unknown error when using many large jpegs

  Hello

  This is something that I remember reading about in older versions of first, but in the 2015 version, this always seems to happen. It is therefore more than a report bug to a question, because I have a workaround for it. If this isn't the right place to present this kind of info, please let me know.

  Scenario: I create a video project and import a large number of large JPEG images taken by a digital camera (12-20 Megapixel, 50 + photos).

  To help each other in the sequence and then try to export the video as file causes an unknown error during export times randomly, sometimes at the beginning, sometimes in the Middle, no mater which exit do format, bitrate, settings, etc.

  How I solved the problem: I resized pictures on about 4 million pixels - and viola - everything travels very well.

  I also noticed, that when the project contains only a few large images, it can work also still very good export, but if there are more than a few, the error starts occurring.

  Don't know which version of CC 2015 I used, I can check later.

  I hope this feedback is helpful for you guys

  Edit: the machined used is a quad core Xeon, 16 GB of RAM, nVidia GTX750, SSD + 2x1To Raid0

  It was never recommended to use ginormous stills in first. A batch resize in Photoshop or IrFanView for instance would take a few seconds and certainly ease the burden on your software and your hardware.

  Thank you

  Jeff

• Unknown error when using Vision USB3 with PixeLink D725CU-T

  Hello

  I recently bought a camera PixeLINK PL-D725CU-T to use with LabVIEW. The camera is a camera USB 3.0 and meets the standard USB3.0 Vision according to the here AIA Web site: http://www.visiononline.org/product-catalog-detail.cfm?productid=4196.

  Unfortunately, when I try to set the camera using the Acquisition of Vision of NOR-IMAQdx USB3.0 drivers and run the camera in MAX I get error unknown 0xBFF6903B. I have a vision capture program I wrote in LabVIEW 2016-64-bit as well as survey the same mistake (I PSS and have everything updated versions latest software as part of my troubleshooting).

  The camera works through DirectShow in MAX interface and my LabVIEW program suggesting an incompatibility with the current IMAQdx driver. I have read a few previous posts on the update of the firmware on the cameras and am currently in contact with the manufacturer to try to resolve the problem on this end as well. Is there a way to revert to an earlier version of the Acquisition of the Vision to see if a previous version worked? Or I am barking the wrong tree here?

  I am running Windows 7 64 bit system. I have versions of LabVIEW installed 32-bit and 64-bit 2016.

  Any help is appreciated.

  Thank you.

  This problem has been resolved with an update of the firmware of PixeLINK so the patch you mentioned that was provided by OR support and support PixeLINK.

• Unknown error when using content in Acrobat Std XI edition

  In Acrobat Std XI, I tried to use the first three items in editing content tools and get the context menu following:

  

  Is this a bug or is there something wrong with my document?

  OK, delivered by Adobe technical support. Discovered that the error was in the PDF file that is delivered from the Web site. He saw very well, but in the edition had problems. Solution was to print the defective original PDF, the Adobe PDF printer and then edit the new file. It worked well.

• Receive window false error when starting outlook express.

  Made the mistake of opening a link in an email from fake USPS concerning the receipt of a registered letter.

  Since that time, McAfee detected and apparently removed a virus.

  However, I keep getting an indication false error (i.e. standard Windows error window) whenever I have start to ANY e-mail system (Outlook Express, Hotmail, etc.).

  If I click 'Send' or 'do not send' in the error window gets wrong, put an end to the mail session.

  If I do NOT click 'Send' or 'do not send' and just ignore the false error, I use Outlook Express, Hotmail, etc. without problem.  I finally shut the program email normally and THEN click 'do not send' get rid of the fake error window.

  Associated with this problem is the fact that rundll32.exe is CONTINUALLY running.  I checked the rundll32.exe in the Windows directory and it seems to be the right size.  However, there are a couple of suspicious ".pf" extensions that are not the same size.

  The false error window is named "dwwin.exe" and the error is 'unknown' or 'wsort32.exe' in the error report.  I'm not sure of the last name, however.

  Hello
  I suggest you to follow the steps below and check if it helps:
   

  Method 1: Try to scan your hard disk from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Method 2: Also I suggest that you update the latest version of McAfee software.

  http://www.McAfee.com/us/McAfee-Labs/resources/security-updates.aspx

  Method 3: Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express:

  http://support.Microsoft.com/kb/813514

  Hope this information is useful.

• Receive the 25 (Null) error when using Flightsimulator FSX

  Receive the 25 (Null) error when using Flightsimulator FSX

  Hello

  Try to open the it to start - all programs - Games - Games Explorer, and then clicking the icon FSX.

  A disk error of 25 means that the program cannot read your disk reading.  Either the disc is scratch, dirty or defective.  If you need another drive, or you can try it on another computer. The message of Visual elements of Vista is not serious.  Vista will automatically your screen to a basic compatible mode when the application is launched.  However, it seems that your game is a failure due to the disk error and not the Vista display problem. Try to clean the disc and see if that helps.

  Last resort, it seems you'd have to do a complete uninstall and reinstall FSX.

  Cheers!

• Whenever I restart my computer, my account to outlook express email is going to remove my itself. So I have to configure an email account, once again, when using outlook express.

  Original title: outlook express

  Whenever I restart my computer, my account to outlook express email is going to remove my itself. So I have to configure an e-mail account again when using outlook express, please tell me how to solve this problem.

  Hello

  1. is this problem limited to this user account?
  2. have you made changes on the computer recently?

  Method 1.
  Let us first start the sfc scan and check if there are any file system corruption.
  a. to do this, click Start, click programs, accessories principally made, right click Guest and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 2.
  If the problem persists, then create a new user profile and then copy your current users assigning to this profile. For more information, see:
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

  How to copy data from a corrupted to a new profile in Windows XP user profile
  http://support.Microsoft.com/kb/811151

  How to recover damaged Windows XP user profile
  http://support.Microsoft.com/kb/555473

  I hope this helps.

• Why do I get an unknown error when the AI document opening in Illustrator 5.5?

  Why do I get an unknown error when the AI document opening in Illustrator 5.5.? How open/fix documents?

  Did this happen after update to Yosemite? Sorry, but this could be a number of things and not only have a response

  • disable the automatic plugin font activator which is delivered with the police officer, you activate a corrupt police.
  • Clean your cache of police download nuke font it's free
  • reset your prefs AI
  • Delete your printer driver in the system preferences and recreate - Yes, there is a possibility that this can cause this
  • hold off on the update to El Captan for now, even if an update of the system has a chance to eliminate the problem, you're on CS5.5

• "APP-OFA-48289: unknown error when creating control systems (immobilization).

  Hello
  
  I have problem
  
  Navigator: Fixed Asset Manager > Setup > system > control systems
  
  When I tried to create in the system controls are error message:
  
  "APP-OFA-48289: unknown error." Please contact your system administrator. »
  
  
  OS: Linux
  EBS: Oracle R12.1.3
  Database: 10g
  
  
  Thank you
  
  Escaline

  Navigator: Fixed Asset Manager > Setup > active system > system controls

  When I tried to create in the system controls are error message:

  "APP-OFA-48289: unknown error." Please contact your system administrator. »

  OS: Linux
  EBS: Oracle R12.1.3
  Database: 10g

  Please see (APP-OFA-48289 unknown error when recording data in system controls form FAXSUSTL.) [ID] 966382.1).

  Thank you
  Hussein

• dbms_crypto - avoid error when using different key in lower environment

  Hello Experts,
  
  We use Oracle 11.2.0.2. We intend to implement dbms_crypto to encrypt some columns. Clone us the production data at the lower environment (DEV, QC).
  
  The lowest environments, we do not want to obtain the sensitive data from production and do not plan to use the same key. Instead of getting an error when using different keys, is it possible to get a different set of results.
  
  In other words, we want the implementation will be same in environments but use a different key in lower environment and obtain different results (or garbage).
  
  Any suggestions would be greatly appreciated.
  
  The test of this logic, I get following error when using the different keys to decrypt. It works fine if I use the same key.
  Error on line 1
  ORA-28817: PL/SQL function has returned an error.
  ORA-06512: at "SYS." DBMS_CRYPTO_FFI', line 67
  ORA-06512: at "SYS." DBMS_CRYPTO", line 44
  ORA-06512: at line 19
  

  DECLARE
    l_credit_card_no    VARCHAR2(19) := '1234 5678 9012 3456';
    l_ccn_raw           RAW(128) := UTL_RAW.cast_to_raw(l_credit_card_no);
   
   l_key               RAW(128) := UTL_RAW.cast_to_raw('abcdefgh');
     l2_key               RAW(128) := UTL_RAW.cast_to_raw('12345678');
  
    l_encrypted_raw     RAW(2048);
    l_decrypted_raw     RAW(2048);
  BEGIN
    DBMS_OUTPUT.put_line('Original  : ' || l_credit_card_no);
  
    l_encrypted_raw := DBMS_CRYPTO.encrypt(src => l_ccn_raw, 
                                           typ => DBMS_CRYPTO.des_cbc_pkcs5, 
                                           key => l_key);
  
    DBMS_OUTPUT.put_line('Encrypted : ' || RAWTOHEX(UTL_RAW.cast_to_raw(l_encrypted_raw)));
  
    l_decrypted_raw := DBMS_CRYPTO.decrypt(src => l_encrypted_raw, 
                                           typ => DBMS_CRYPTO.des_cbc_pkcs5, 
                                           key => l2_key); --**Using different key to decrypt
  
    DBMS_OUTPUT.put_line('Decrypted : ' || UTL_RAW.cast_to_varchar2(l_decrypted_raw));
  END;

  Thank you.

  In general, you can't get different results in different environments, no.

  Of course, you could write your routine to decrypt so that it intercepts it and returns a random string of RAW.

  However, this is not normally the way people go on hiding sensitive data in environments below. It would be much more common to use a tool that is designed for this tool. For example, Oracle has a Pack of masking of data for Enterprise Manager that allows to replace sensitive data with false, but realistic data as part of the updating of the environments below. There are also data from third-party tools like masqueur datamasking.

  Justin

• Unknown error when you try to configure Hotmail with Outlook express

  I have a friend (newbie) remote and I'm trying to configure Outlook Express for him it is XP home. (there Hotmail). I followed your instructions above using Hotmail as server, but whenever it sends an e-mail message using Outlook Express there get the error message:

  An unknown error has occurred. Account: 'Hotmail', server: 'smtp.live.com', Protocol: SMTP, server response: 421 cannot establish TLS with SMTP server 65.55.172.254:25, SSL_connect error 5', Port: 25, secure (SSL): Yes, Server error: 421, error number: 0x800CCC67.

  I tried as well confirm 25 & 587 in mail outgoing (incoming mail.995). Also, by using POP3.

  Hi EddieTL,

  You can follow the below mentioned article and see if it helps.

  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

• Unknown error when scanning

  I recently updated my OS to 10.6 to 10.4. I run a Deskjet F4235. Since the upgrade I can scan is more pictures. When I press Scan on the printer the only answer is the flashes of light from power for a few seconds. When I try to use the HP Scan Pro application, I get this message: "Sorry, an unknown error has occurred." I know that it must have a software problem, as always, it will print and copy normally. Please let know us if there's a software patch that I need to download. Thank you.

  OK, we can solve the problem.  Sometimes the old software and new software do not play well together.

  We're going to rub out HP software and that the software install the 10.6 from hp.com.

  To run the scrubber:

  Go to Applications/library/Hewlett Packard / click Uninstall HP

  Click on continue

  Highlight your device in the left pane

  Hold down the Ctrl and Opt, as well as Apple and click on uninstall

  There will be a pop up that asks if you are sure you want to uninstall all hp software.  (At this point, if you continue, all HP printers you have installed will need to be reinstalled, this is why we do not run this thing all the time)

  Click on continue

  Let the brosseuse it is.

  After that, run the 10.6 software you have already downloaded and add your printer with printing and fax and let the operating system search for updates and other. If it asks you if you want to download them, accept you.

  Who should take care of it.

• error code 80070424 (unknown) error when checking for updates to Windows.

  Original title : Please help sir its very urgent! I just learned that Windows cannot check the updates.  "Error code 80070424 unknown error" appears when I try to check updates. In 'services', it is set to 'start '... What can I do? Please Sir reply soon...

  Please help sir its very urgent! I just learned that Windows cannot check the updates.  "Error code 80070424 unknown error" appears when I try to check updates. In 'services', it is set to 'start '... What can I do? Please Sir reply soon...

  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424
  http://support.Microsoft.com/kb/968002/

  or

  You can not turn on automatic updates on a Windows XP Service Pack 2 (Service Pack 3) computer
  http://support.Microsoft.com/kb/916261

  or

  Click Start, select run, type: regsvr32 c:\windows\system32\wuaueng.dll
  Click OK
  (Works for Vista)

  You may need to restart. No guarantee. TaurArian [MVP] 2005-2010 - Update Services

• Error 800b0100 Windows Update encountered an unknown error when executing update security for Windows Vista (KB967723)

  Whenever Norton runs a scan of the live update I have the following message and am not sure how solve the problem - error 800b0100 Windows Update encountered an unknown error runtime security update for Windows Vista (KB967723). What can I do?

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100":
  http://support.Microsoft.com/kb/956702

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• No driver error when you include traditional DAQ in the Kit of Distribution CVI 9.0

  I have a legacy code (CVI 6.0) that I wanted to update recently.  The main reason was the ability to add the device drivers for the distribution kit.  When I installed the software on a new machine, I had a driver number error when you make a call to CounterStart.  In the past that error means that I had not included support CVI when I installed traditional DAQ.  Since that it has been installed as part of a kit of distribution that I do not see what elements have been installed.  I guess that since it was listed in the framework if a distribution of CVI kit that support the CVI is automatically.  How can I get rid of not the pilot error?

  Thank you

  CP

  Hello

  Unfortuantely, there is no way to have included in a CVI tDaq generate setup with the support of the CVI.  R & D is aware of the issue.  For now, the solution is to modify the installation of tDaq and add support for the CVI.

  For more information, please see this KB.