Error while creating or rebuilding Oracle text Lexer keyword index
Hi allI am getting following error when I create oracle text indexes using lexer & keyword in the list of stopwords.
Please help me if any body know.
Thanks in advance.
Error from the 1 in the command line:
CREATE INDEX TXT_INX_TEXT_SEARCH ON TEXT_SEARCH (BFILE_DOC)
Post INDEXTYPE IS "CTXSYS. "" (LOCAL) CONTEXT.
PARTITION SETTINGS "BEFORE_2007" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q1_2007" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q2_2007" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q3_2007" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q4_2007" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q1_2008" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q2_2008" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q3_2008" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q4_2008" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q1_2009" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q2_2009" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q3_2009" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q4_2009" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "THE_REST' ('LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)')
)
Error in the command line: 1 column: 13
Error report:
SQL error: ORA-29855: error when executing routine ODCIINDEXCREATE
ORA-20000: Oracle text error:
DRG-11000: invalid keyword LEXER
ORA-06512: at "CTXSYS. DRUE", line 160
ORA-06512: at "CTXSYS. TEXTINDEXMETHODS', line 365
29855 00000 - "an error occurred in the execution of routine ODCIINDEXCREATE.
* Cause: Cannot run the ODCIIndexCreate routine.
* Action: Check if the routine was coded correctly.
Kind regards
Jack R.
Hello
It works if you put a clause of additional PARAMETERS to the end, so the creation looks like:
CREATE INDEX TXT_INX_TEXT_SEARCH ON TEXT_SEARCH (BFILE_DOC)
INDEXTYPE IS "CTXSYS. "" (LOCAL) CONTEXT.
PARTITION SETTINGS "BEFORE_2007" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q1_2007" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q2_2007" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q3_2007" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q4_2007" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q1_2008" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q2_2008" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q3_2008" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q4_2008" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q1_2009" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q2_2009" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q3_2009" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "Q4_2009" ("LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)"),
PARTITION SETTINGS "THE_REST' ('LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)')
)
PARAMETERS ('LEXER dd_lexer list of words EMPTY dd_stoplist SYNC (ON COMMIT)')<==>==>
Hope this helps
Herald tiomela
Tags: Database
Similar Questions
-
Getting error while creating partitation on hard drive
Getting error while creating partitation on hard drive
Attached screenshot for warning msg
You can have up to four primary partitions. Since you already have four of these partitions, you cannot create a fifth partition. You must do this:
- Delete a primary partition.
- Create an extended partition.
- Create logical partitions as you wish within the extended partition.
-
Error when creating a layer of text, when 2 + work plans are available in the document
Hi, I met a weird error while trying to create a new text layer.
When a single work plan is available in the document, the script works well and create a new empty text layer;
When 2 or more work plans are available in the document, the script generates the layer, but she then gets stuck when trying to convert a text. The console says "the layer cannot contain text.
Paste my code here with comments.
#target photoshop //this script attempts to create a text layer above the selected layer contained into an artboard. //For some reason, it works on the first available artboard, but not on the other ones. The error is "The layer cannot contain text" //get active PS document var doc = activeDocument; //get active artboard var currentArtboard = getActiveArtboard(); //create new art layer in the current artboard var newLayer = currentArtboard.artLayers.add(); //trying to convert to text layer. Fails when 2+ artboards are available int the document newLayer.name = "test"; newLayer.kind = LayerKind.TEXT; function getActiveArtboard() { var key = false; var l = doc.activeLayer; var p = l.parent; try { while (!key) { doc.activeLayer = p; var ref = new ActionReference(); ref.putEnumerated(charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt')); key = executeActionGet(ref).getBoolean(stringIDToTypeID("artboardEnabled")); if (key) { return p } p = p.parent; } } catch (e) { alert('This layer is not contained within an artboard'); return undefined; } }
Any help is greatly appreciated. Thank you in advance!
var doc = activeDocument; var currentArtboard = getActiveArtboard(); function makeTextLayer() { var desc = new ActionDescriptor(); var desc2 = new ActionDescriptor(); var ref = new ActionReference(); ref.putClass(app.charIDToTypeID('TxLr')); desc.putReference(app.charIDToTypeID('null'), ref); desc2.putString(app.charIDToTypeID('Txt '), "text"); var list2 = new ActionList(); desc2.putList(app.charIDToTypeID('Txtt'), list2); desc.putObject(app.charIDToTypeID('Usng'), app.charIDToTypeID('TxLr'), desc2); executeAction(app.charIDToTypeID('Mk '), desc, DialogModes.NO); return doc.activeLayer } var newLayer = makeTextLayer(); newLayer.move(currentArtboard, ElementPlacement.INSIDE); function getActiveArtboard() { var key = false; var l = doc.activeLayer; var p = l.parent; try { while (!key) { doc.activeLayer = p; var ref = new ActionReference(); ref.putEnumerated(charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt')); key = executeActionGet(ref).getBoolean(stringIDToTypeID("artboardEnabled")); if (key) { return p } p = p.parent; } } catch (e) { alert('This layer is not contained within an artboard'); return doc } }
-
Oracle Text, multi_column_datastore describe index
Referring to the
TOAD or SQL Navigator, you can click on an object any (such as a table, index) and click on the "script" tab where the code is generated to create.
Assuming that I am a person who sees the index for the first time where/how I can find multi_columns/settings with which the index has been created?
For example:
And script says:exec ctx_ddl.drop_preference( 'myds' ); exec ctx_ddl.create_preference( 'myds', 'MULTI_COLUMN_DATASTORE' ); exec ctx_ddl.set_attribute( 'myds', 'COLUMNS', 'item_barcode, item_title, item_subtitle' ); CREATE INDEX i_index_test ON item (item_title) INDEXTYPE IS ctxsys.context PARAMETERS ( 'datastore myds' );
Where can I find datastore "myds"?CREATE INDEX PLSQL.I_INDEX_TEST ON PLSQL.ITEM (ITEM_TITLE) INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS('datastore myds') NOPARALLEL;
You can use ctx_report to get information about an index.
I use it for SQL * more like this:
set pagesize 0 set heading off set trimspool on set long 500000 spool index.sql select ctx_report.create_index_script('MyIndexName') from dual; spool off
The only thing it will not give you is the source for all of the procedures used in the user_datastore. You can get to user_sources.
-
Oracle Text multi column index based query returns no rows
Hello
I have a MAH_KERESES_MV table with 3 columns OBJEKTUM_NEV, KERESES_SZOVEG_1, KERESES_SZOVEG_2. I create the following Oracle multi column text index:
ctx_ddl.create_preference exec ('MAH_SEARCH', 'MULTI_COLUMN_DATASTORE');
ctx_ddl.set_attribute exec ('MAH_SEARCH', 'COLUMNS', 'OBJEKTUM_NEV, KERESES_SZOVEG_1, KERESES_SZOVEG_2');
create index MAX_KERES_CTX on MAH_KERESES_MV (OBJEKTUM_NEV)
indexType is ctxsys.context
parameters ("DATASTORE MAH_SEARCH");
But the query returns no rows, although if I make the query with the 'like' operator, and then I get the results as expected:
SELECT id, OBJEKTUM_NEV
OF MAH_KERESES_MV
WHERE CONTAINS (OBJEKTUM_NEV, "C") > 0;
Can some body please help? TIA,
TamasYou can do it in Oracle Text, well it is not necessarily desirable.
You can search the
WHERE CONTAINS(OBJEKTUM_NEV, '%C%')>0;
And it will probably work in a simple test. However, using a leader like this wildcard prevents them the index on the table "list of words" used, so such a request can be very slow on a large system.
You can improve this by using SUBSTRING_INDEX, but making your much bigger index. And you could always hit the 'expansions too' problem if %C % expansion is more than about 15,000 words (depending on version and different settings).Also be aware of differences in case - %C % will match 'fact' or 'FACT', as part of a CONTAINS, but not part of a TYPE.
-
Spatial index error while creating an index for a column GeoRaster
Hi all
Several months ago, I inserted 12 map PNG Raster files in Oracle as GeoRaster data. I then looked into MapBuilder to verify that they have been charged, and as they appear, it seems to suggest that they were.
Today, however, I realized that I had not created an entry for USER_SDO_GEOM_METADATA or a spatial index. That's why I tried to do it by using the code below. When I made an entry in USER_SDO_GEOM_METADATA, I didn't add .spatialextent after the column name, web_raster_map. But while reading the manual MapViewer I decided that it was necessary to create a new entry. However, the error message displayed at the end, was the same in each case. If anyone has any ideas on what I can hurt, I would be grateful.
Is the entries abscissa-x and the ordered is wrong? Should this be X and Y, and if that resolves the errors? I've been using a script I created previously to vector data and adapting.
Error message was:INSERT INTO USER_SDO_GEOM_METADATA (TABLE_NAME, COLUMN_NAME, DIMINFO, SRID) VALUES ( 'WEB_RASTER_MAP_FILE', 'web_raster_map.spatialextent', SDO_DIM_ARRAY( -- full grid size goes here SDO_DIM_ELEMENT('eastings-x', -3273.58473839662, -8471.66, 0.005), SDO_DIM_ELEMENT('northings-y', -9694.76, -1632.88473839662, 0.005)), 96163497); -- this is a user created srid commit; CREATE INDEX WEB_RASTER_MAP_FILE_IDX ON WEB_RASTER_MAP_FILE (web_raster_map) INDEXTYPE IS MDSYS.SPATIAL_INDEX; commit;
Kind regardsError starting at line 14 in command: CREATE INDEX WEB_RASTER_MAP_FILE_IDX ON WEB_RASTER_MAP_FILE (web_raster_map) INDEXTYPE IS MDSYS.SPATIAL_INDEX Error at Command Line:14 Column:13 Error report: SQL Error: ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine ORA-13200: internal error [Unsupported Type] in spatial indexing. ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 10 29855. 00000 - "error occurred in the execution of ODCIINDEXCREATE routine" *Cause: Failed to successfully execute the ODCIIndexCreate routine. *Action: Check to see if the routine has been coded correctly. commit succeeded.
Tim
Published by: user467357 on March 23, 2009 17:45
To add an additional comment.Tim,
You must create the index on web_raster_map.spatialextent.
The create index must therefore:CREATE the INDEX WEB_RASTER_MAP_FILE_IDX ON WEB_RASTER_MAP_FILE (web_raster_map.spatial_extent)
INDEXTYPE IS MDSYS. SPATIAL_INDEX; -
Hi all
OS: Win XP
DB: 11.2.0.1
I installed an oracle in my system. Created a database test and try ti create a user, but is in error.
SQL > create user test identified by the test.
create user identified by test test
*+
ERROR on line 1:
ORA-01031: insufficient privileges
I connected through "sys as sysdba.
What can be the problem?
Kind regards.OK... I got the link to disable DV.
http://www.filibeto.org/Sun/lib/nonsun/Oracle/10.2.0.1.0/B19306_01/server.102/b25166/dvdisabl.htm#BAJICEFE
Now I'm able to create user...!
Thnks... !!!
-
Have cleared airport Time Capsule and factory reset after getting this message. Don't know where to go with it.
Some files have a property incorrectly together which will prevent them from being changed or deleted when the system is running. This property cannot be removed in recovery mode. If you do not feel that you can do this yourself, please someone more experienced to help you get.
1 back up all data. There are ways to back up a computer that is not fully functional. Ask if you need advice. Don't skip this step.
2. disconnect all external storage devices.
3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.
4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.
5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.
6. triple - click anywhere in the line below to select this option:
chflags norestricted /V*/*/L*/Keyc*/*
Copy the selected text in the Clipboard by pressing Control-C key combination.
7. Quit Safari. You go back to the OS X Utilities screen.
In the menu bar, select
Utilities ▹ Terminal
Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.
Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.
8. Select
▹ Restart
in the menu bar.
9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.
Select and copy this line as in step 6:
sudo xattr -c /L*/Keyc*/*
Launch the Terminal application integrated in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste in the same Terminal window. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.
If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and start over.
Wait for a new line ending with a dollar sign ($) below what you entered. You can then quit Terminal. Test.
-
Error while trying to run oracle shell
With the help of 11g
Shell script
#! / bin/bash
Claire
echo "testing123.
named transfer2.sh (it's just a shell script test will be real scp a file to a remote server, but I can not even this one to work first).
I can't run no problem under linux
> sh transfer2.sh
testing123
I want to be able to schedule this to run from oracle.
my tests so far:
BEGIN
DBMS_SCHEDULER. () CREATE_JOB
job_name = > 'TEST_SHELL ',.
JOB_TYPE = > 'EXECUTABLE. "
job_action = > ' / myfiles/transfer2.sh '.
start_date = > SYSDATE,.
REPEAT_INTERVAL = > 'FREQ = HOURLY;',
activated = > FALSE,
Comments = > 'shell script to Oracle.
);
end;
/
now to run the task
BEGIN
dbms_scheduler.run_job ('TEST_SHELL', true);
end;
/
Error from line 43 in order:
BEGIN
dbms_scheduler.run_job ('TEST_SHELL', true);
end;
Error report:
ORA-27369: jobs of type EXECUTABLE failed with exit code: 255
ORA-06512: at "SYS." DBMS_ISCHED", line 185
ORA-06512: at "SYS." DBMS_SCHEDULER", line 486
ORA-06512: at line 2
27369 00000 - "type EXECUTABLE job failed with exit code: %s."
* Cause: A problem arose when running EXECUTABLE type work.
The cause of the problem is identified by the exit code.
* Action: Correct the cause of the code output and the reporter at work.
I put the myfiles directory to 0777
I put all the files in the myfiles directory to 0777
so everyone should have access to run scripts here.
I also put the extjob file to 0777
any help appreciated.
Thank you.
Hello
The error you see is because the work is a failure. If you're on 11g, try using a credential to perform the task or check the post below a guide to perform the work on 10g
Re: Guide to the external work on with dbms_scheduler 10g for example scripts, batch fi
For example:
BEGIN
() sys.dbms_scheduler.create_job
job_name => ' 'SYS '. ' ' MYJOB1 ' ',
job_type-online "EXECUTABLE."
job_action => "/ usr/bin/bash"
start_date-online systimestamp zone ' Asia/Baku. "
job_class-online "DEFAULT_JOB_CLASS."
auto_drop => FALSE,
number_of_arguments-online 1
enabled-online FALSE);
sys.dbms_scheduler.set_job_argument_value (=> of job_name ' "SYS".) "MYJOB1" (', argument_position-online 1, argument_value => ' / u01/app/ora10g/test1.sh');
sys.dbms_scheduler. Enable (' "SYS".) ("' MYJOB1" ');
END;
-
reporting invalid-ORA-00900 error while creating a function
Hello
can someone guide me to what is doing the worng...
error! sql statement not valid 00900 - ORA-.
your help is greatly appreciated.
FUNCTION test_irc (num in NUMBERS, varsql IN VARCHAR2)
RETURNS the NUMBER IS varSTMT VARCHAR2 (32767): = NULL;type of v_key_type temp2_irc.key_type %;
v_key_type1 temp2_irc.key_type1%type;
BEGIN
INSERT INTO temp2_irc (key_type, key_type1)
VALUES(v_key_type,v_key_type1);
RETURN 1;EXCEPTION WHEN OTHERS THEN
dbms_output.put_line ('down in test');
dbms_output.put_line (' SQL error: ' |) SUBSTR (SQLERRM, 1, 1000));
RETURNS - 1;
END test_irc;temp2_irc / / desc:
KEY_TYPE varchar2 (1 byte),
key_type1 varchar2 (1 byte)
If you create a database function, you must include the keyword of CREATE or REPLACE
for example
Create the FUNCTION replace or test_irc (num in NUMBERS,
varsql IN VARCHAR2) RETURN NUMBER IS
varSTMT VARCHAR2 (32767): = NULL;
v_key_type temp2_irc.key_type%type;
v_key_type1 temp2_irc.key_type1%type;
BEGIN
INSERT INTO temp2_irc (key_type, key_type1)
VALUES(v_key_type,v_key_type1);RETURN 1;
EXCEPTION WHEN OTHERS THEN
dbms_output.put_line ('down in test');
dbms_output.put_line (' SQL error: ' |) SUBSTR (SQLERRM, 1, 1000));
RETURNS - 1;
END test_irc; -
Hello
CREATE OR REPLACE VIEW V_SAM AS
Select 1 + 1 d of double;
Error in the command line: 1 column: 0
Error report:
SQL error: No more data to read from socket
Kind regards
FameHello
Check this thread: instead of data to be read from the SQL 17410 socket error
Kind regards
Karine -
error while applying color to find text
Dear all,
I try to find double combined words and their color, my script finds them but no color, here is the script
can anyone find the error in this script it's quite kind of you.
myDoc var = app.activeDocument;
app.findGrepPreferences.findWhat = "(\\w+)-(\\w+)";
var found = myDoc.findGrep ();
for (var i = 0; i < 3; i ++) {}
var a = [i] find .silence;
a.FillColor = myDoc.colors.item ("Red");
}
Thanks in advance.
Selva
Hi Selva,
I have modified your JS Code, please use and go back, I tested the code updated the js sound working fine. Please check the caseSensitive in fillcolor instead of fillColor.
a.fillcolor = myDoc.swatches.itemByName("Red"); instead of a.fillColor = myDoc.swatches.itemByName("Red"); var myDoc = app.activeDocument; app.findGrepPreferences.findWhat = "(\\w+)-(\\w+)"; var finds = myDoc.findGrep(); //for(var i=0; i<3; i++){ for(var i=0; i
THX
csm_phil
-
Error when creating custom text field
HI Guyz,
I am getting below error while creating a new custom UDF text field. All the world is facing this problem earlier?
"Houston-COLUMN_UNAVAILABLE: no additional custom attributes of this type cannot be created"
Swati - PÉAN
The problem is finally solved.
Yes, there are several udf to IOM. However, it stores the details in a table of the adf. Cleaning of the custom fields were created.
TRUNCATE TABLE ADF_EXTENSION_COLUMN_USAGE;
DELETE ADF_EXTENSIBLE_TABLE_USAGE;
COMMIT;
-Swati Pandey
-
Hi all
We have recently migrated one of our database to oracle 10.2.0.2 to Oracle 10.2.0.4 and since that time, Oracle Text Engine an indexer is unable to work properly.
Indexing data systematically result in the following error:
DRG-50857: error oracle in dreii0fsh
ORA-06550: line 1, column 106:
PLS-00302: component 'S_MODE' must be declared.
ORA-06550: line 1, column 10:
PL/SQL: Statement ignored
Note that the data that have been indexed with the previous Oracle version can still be found with ' Select... where... contains. ', although new datas not indexable at all.
Can someone help me with this problem?
Published by: methos on May 11, 2010 06:59See on metalink:
"DRG-50857: oracle in dreii0fsh error ' when creating indexes of TEXT [750898.1 ID]"
It seems that you updated the binaries, but Oracle not the text itself.
Werner
-
Original title: getting the error while creating a new partition
here to create a new partition get the error "the operation you selected will convert the disc selected basic to dynamic disk... etc" Please help.
I would like to join the screenshot of the error, how?
Hello
1 have had any changes made on the computer before the show?
2. how many partitions are there currently on the computer?
3. how many hard disks on the computer do you use?
4. when exactly you get the error message?
I suggest you refer to the article and try to follow the steps and check if you are able to create a partition:
Create a new Partition on a hard disk in Windows 7
http://TechNet.Microsoft.com/en-us/magazine/gg309170.aspx
I also suggest you the link and attach a screenshot of the screen.
Maybe you are looking for
-
can not find where the start up programs are in the control panel
My computor is a 17 dell studio. Vista family premium is the operating system. When I go into Control Panel, I can't locate where the control which programs start when I turn the computor. Thank you for your help, I would appricate.
-
Taskbar at the top, high Windows to hide under the taskbar when opened
I had this problem with all versions of windows that I can remember since I've been putting the taskbar to the top of the screen. Why Windows was never designed to properly use this configuration is beyond me. In fact, it's a way far more productiv
-
SSH access to LWAPP Access Point
Hello I have just a question about the access point (in LWAPP) using SSHv2. When can I see the beginning of the AP (in my case a 1242AG) the SSHv2 is enabled, but when I try to connect to the AP by SSH, my SSH connection is cancelled immediately. My
-
Original title: Windows 10 I upgraded my laptop to windows 8 for windows 10 and it has stopped working, and some windows files disappeared. I did a system restore that brought me to the previous windows 8. then I downloaded the windows 10 installatio
-
Match type dropdown with liquid
I'm trying to target a selected option in a dropdown list (for example. "< option value ="Junior"' > Junior < / option >") so that I can run something similar to this Liquid extract: "{% If ' < option value = 'Junior' > Junior < / option > is selecte