Error while trying to initialize the session of material

Similar Questions

• "There was an error while trying to delete the snapshot"

  I am running VMware Fusion on a 10.5.7 and when I try to delete the old clichés I get this error

  "There was an error while trying to delete the snapshot

  Impossible to clean deleted files:

  The specified virtual disk needs to be repaired.

  It's the performance of FreeBSD. The server has no harm actually run but gets big enough and I would like to clean it up a bit. Any suggestions?

  Thank you very much

  MacGruder says:

  I am running VMware Fusion on a 10.5.7 and when I try to delete the old clichés I get this error

  "There was an error while trying to delete the snapshot

  Impossible to clean deleted files:

  The specified virtual disk needs to be repaired.

  It's the performance of FreeBSD. The server has no harm actually run but gets big enough and I would like to clean it up a bit. Any suggestions?

  Firstly it goes without saying, but I'll say it anyway...  Always back up all of the Virtual Machine with the Virtual Machine within the OS, not suspended, and Fusion to stop closed before trying to make repairs on a virtual hard disk.

  This may not work if it's the basic disk that needs to be repaired and the Virtual Machine has snapshots, but I go through it.  You can try to use "/ Library/Application Support/VMware Fusion/vmware-vdiskmanager ' with the '-r' option.  Note: If the basic disk do not while snapshots are at stake, because it will cause more problems so my suggestion is first try to create a new basic without snapshots disk using the information below (see another option).

  Also one of the reasons to delete a snapshot may fail if there is no adequate free disk space for the operation ends so make sure you have a lot of free disk space.

  Another option would be to create a new basic disk, and then use dd by using an Image of CD/DVD/ISO Linux Live in the image of the old drive so written delta in snapshots to a new basic disk.

  I like to use the ISO Image of KNOPPIX_V5.1.1CD - 2007-01-04 - IN .iso to start the Virtual Machine and use dd to leave because it works well with VMware SCSI virtual hard disks.

  Also in Fusion 2.x, configuration the target Virtual Machine's .vmx file must be changed manually to have the present following parameters when using Knoppix.

  usb:0.deviceType = "mouse"
  usb:0.present = "FALSE"
  mouse.vusb.enable = "FALSE"
  

  Note: The first two parameters may already exist but if the other exists and is set to true, then set it to FALSE and the third are probably already so just add it.

• get the "Connection to the MDEX error" error while trying to open the micro browser

  Hello
  
  I use short tools and Framework 3.1.0 and MDEX 6.3.0.
  
  While trying to open the Workbench UI browser mic to create configurations of page template, I get message drop-down according to:
  
  Connection to the MDEX error. The data service associated with this editor is not properly configured.
  
  Please guide the if you have the slightest idea.
  
  Thank you
  Ben Milot

  I set up different RecordSpotlight editor to use a short instance successfully. What I did is to change apps\ [your app name]\config\editors_config\services\dataservice.json with search short configuration file updated, save the file and run apps\ [your app name]\control\set_editros_config.bat to apply the change.

  To check, you can run apps\ [your order of name]\control\export_site.bat app to export the configuration of your site, updated data service configuration should manifest in the XML of the exported site.

  It will be useful,

  Michelle

• 109, error network connection error, while trying to install the first instance cs6

  I get an error as described above, while trying to install the trial CS6 version. First time to install on a new computer with Vista.

  any advice / help... ? Thank you

  Solution 1 in troubleshoot Adobe Download Assistant - n_1 http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html#main_Solutio try to reset your download experience.  If you continue to have problems, then you can try the steps listed in http://forums.adobe.com/thread/981369 to launch a direct download of the software.

• Event Viewer error "there was an error while trying to read the local hosts file." file "hosts" but good

  Hello

  In Event Viewer, I see a lot of mistakes like:

  Source: The customers DNS events

  There was an error trying to read the local hosts file.

  I read that threat indicating to rename the hosts for "hosts" file

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/system-log-shows-repeating-error-code-3221225485/3700e855-ded4-4F12-960f-1577f6132c04

  HOWEVER, the name of the file in my computer appears as it should

  C:/Windows/System32/drivers/etc / "hosts".

  and the content of the file is as it is supposed to be according to: http://support.microsoft.com/kb/972034

  What should I do to fix this error?

  P.S. I suspect my computer is compromised. Last weekend, Security Essentials has reported a malicious file backdoor and it has been deleted, but I have a weird behavior of the computer

  Thank you

  Veronica

  Try to re-create the hosts file.

  Open Notepad as administrator (click right on the Notepad icon or shortcut and click Run as admin) and type the following information in it:

  127.0.0.1 localhost

  : 1 localhost

  The '1' in the '127.0.0.1' must be in the first column of the line and there must be at least one space between "127.0.0.1" and "localhost". In the second line, there must be at least one space between ": 1" and "localhost".

  Save the file with name "hosts" in the C:\windows\system32\drivers\etc folder.

  Source: http://www.sevenforums.com/system-security/130518-hosts-file-missing-should-i-worry.html

  You seem to have a hard drive problem. Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

• Error while trying to generate the Proxy Services on OSB

  Hello

  I am developing some services on OSB, every service call stored procedures using a database of JCA adapter.

  I followed this tutorial:

  https://guidoschmutz.WordPress.com/2010/08/08/Oracle-service-bus-11g-and-DB-adapter-a-different-more-integrated-approach/

  Business service are ok, they work fine, I tested it directly from OSB.

  Problems when trying to generate the proxy service.

  The General configuration of the proxy after set the source of the wsdl and when I specify jca file proxy service, an error message returned:

  "Unable to update JCA transport invalid JCA proxy service. Transport exception occurred with the following message:
Invalid JCA file for JCA proxy service. If you are creating a Proxy from a Business Service, please select a different transport type (for example, http). If not, JCA file must contain JCA activation spec properties."

  And here's my content created by JDeveloper jca file:

  
  

  < name of the adapter-config = "getApprover" = 'Database adapter' adapter wsdlLocation = "getApprover.wsdl" xmlns =" " http://platform.integration.Oracle/blocks/adapter/FW/metadata ">

  < connection-factory location = ' ist/DB/adapter' UIConnectionName = "Adapter" adapterRef = "" / >

  < endpoint-interaction portType = operation "getApprover_ptt" = "getApprover" >

  < className = "oracle.tip.adapter.db.DBStoredProcedureInteractionSpec interaction-spec" >

  < property name = "SchemaName" value = "APPS" / >

  < property name = "PackageName" value = "ERS_SKS_TASK_UTILITIES_NEW_PKG" / >

  < property name = "Procedurename" value = "GET_APPROVER" / >

  < property name = "GetActiveUnitOfWork" value = "false" / >

  < / interaction-spec >

  < output / >

  < / interaction of endpoint >

  < / adapter-config >

  
  

  Is there someone who had attempted to use the JCA transport with database adapter already? Please give me a suggestion.

  
  

  Thank you.

  Fairlie
  

  Hello

  In transport, changes in the Protocol on the proxy for local or http service.

• Windows repair is not compatible error while trying to run the Startup Repair tool

  I'm running windows 7 Pro 64-bit.  Recently, I have been doing the screen "windows was able to start" with two options, system repair or start windows normally.  When I select the option to repair Windows I wonder for my language and then I get an error message saying that this version of windows is not compatible with the repair system. I created an ERD and still got the same message when I tried to start Windows using the repair disk

  Hello

  Thank you for the update.

  You can follow the suggestion given by Scot hairy replied on 12 April 2012 or hairy Scot replied on 16 April on the following below thread to check if his help.

  http://answers.Microsoft.com/en-us/Windows/Forum/all/this-version-of-system-recovery-options-is-not/16d5d1e6-B383-451F-8bfe-c7501c582fe0

  Warning in the BIOS: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

  Thank you

  Morris Subba

  Support engineer

• We get a '0 x 00000074' error while trying to start the computer.

  * Original title: Windows 8 will not start

  I have a dual boot of Windows 8 and Arch Linux - installation.

  Windows suddenly stopped working (after he installed an update and automatically rebooted itself), and currently breaks immediately after the start of set sequences under construction, which gives the following message:
  Your PC needs to restart.
  Please press and hold the power button.
  Error code: 0 x 00000074
  0x00000001
  0x00000002
  0x81668F00
  0x811B39E0
  I tried to do a system restore, but it fails with the following message is displayed:
  System Restore has failed. The system files and settings on your computer did not change.
  Details:
  System restore failed when deleting the following file:
  Path: D:\$MFT\
  An unspecified error occurred during system restore. (0x8007007b)

  Hello

  Bug BAD_SYSTEM_CONFIG_INFO control has a value of 0 x 00000074. This bug check indicates that there is an error in the registry.

  If you use Windows 8 or 8.1 of Windows, I suggest you follow these steps and see if that fixes the problem:

  has) start the computer using Windows 8/8.1 DVD, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  type b) select keyboard and the correct time .
  c) click on repair your computer in the lower left corner.
  ( d) select Troubleshooting to choose an option screen.
  form e) click Advanced options in the resolution of the problems .

  f) click on command prompt.

  ( g) the following commands and press ENTER after each command line:

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /scanos

  Bootrec /rebuildbcd

  Restart the computer and check the issue.

  Keep us informed on the status of the issue. We will be happy to help you.

• Get a "0x80071ac3" error while trying to delete the .mp3 on Micro SD card 64 GB.

  * Original title: error '0x80071ac3' in Windows 8

  I have a micro sd 64 GB card but every time I tried to put some .mp3 files or even delete what is already on the card I thought it's dirty, I tried to format it still didn't work, I tried to remove it from the cmd prompt also did not work what I do now please with an explanation of the steps to follow.

  Thank you very much I understand your concern.

  Hi Mr.Als,

  -Did you check if the SD card works fine on another computer?

  This problem may occur if the card is damaged. I suggest you run the check disk utility and see if that fixes the problem.

  Run audit on the SD disk utility.

  1. In the start screen, type: CMD, right click command prompt, and then click run as administrator.
  2. At the command prompt, type: chkdsk /r
  3. Exit the command prompt.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  You can also try to unlock the switch and see if it helps.

  Look for the lock switch on the upper left side of the SD card. Lock switch may be a small white or silver tab jutting from the left side of the SD card.

  Keep us updated on the status of the issue.

• code 0 x 80070057 error while trying to create the ERD

  I am running Windows 7 Professional Sp1. I get the above error message when I try to create the "system repair disc. The error message, the parameter is incorrect. Before, I thought that the problem was related to I try to use rewritable CD, which replaced with brand new CD R, but the problem still persists. Has anyone solved this problem? Any help will be much appreciated.

  [Moved from comments]

  Hello

  Thanks for the reply.

  You have the Windows 7 installation disc?

  Try these steps and see if it helps.

  (a) start the system by inserting the Windows 7 installation disc.

  (b) when it gets to the main window, click repair in the lower left corner.

  (c) select command prompt from the main menu of repair.

  (d) at the command prompt, type in recdisc, then ENTER.

  (e) you will get the popup to select what drive letter to create the recovery disk to.

  (f) have a clean DVD into the DVD drive, and then select Start.

  It has to become your created system repair disc.

  Let us know the status to get help.

• Get a "0 x 80070002" error while trying to perform the backup

  * Original title: backup Windows 7 error code ox80070002

  The backup completed, but some files were skipped.

  "Backup has encountered a problem during backup of file c:\Window\system 32\config\system profile\podcasts. error: (System cannot find the specified file ox 80070002

  Hello

  Follow the steps in the article and we update with the results.

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7

  http://support.Microsoft.com/kb/979281

  Let us know if it helps!

• Can pin is more than anything in the start screen. Got the file missing error while trying to perform the refresh

  Original title: pine to start

  I can pin is no longer something to the Windows 8 RT start screen. I tried to update my PC and I can ' t, he says I have missing files. How can I solve the problem?

  Hello again from LiseMcDougall.,.

  You can try this: go to settings/general/PC settings, scroll down and find refresh your PC without affecting your files (Refresh). If your PC will not perform a refresh, you might need to perform a reset (the next option down), where it says delete all and then reinstall Windows. Make sure the RT device is plugged into a power outlet.

  Please let us know what happens.

• Guests of security software to activate the Windows Firewall, gets the error while trying to enable the firewall: cannot display the settings because the associated service is not running

  Original title: activate Windows Firewall

  My security software keeps sending me a message that it detects my Windows Firewall is disabled. I want to enable it, but don't know how. My OS is XP Home. How to activate the firewall?

  Security Warning: the Windows Firewall is disabled

  http://support.Microsoft.com/kb/2288085>

  UTC/GMT is 19:12 Thursday, October 4, 2012

• We get a 641 error while trying to install the two updates of windows.

  I get errow 641 and. I can't get two updates to the loaded window what to do

  * Original title: Update window

  Hello

  1. What is the number of KB (Knowledge Base) the two Windows updates?

  2 are you able to install some other updates?

  3. were there any changes (hardware or software) to the computer before the show?

  Please follow the steps mentioned below and get back to us with the results.

   

  Method 1: run the Microsoft Fixit and see if it helps.

  http://support.Microsoft.com/mats/windows_update/

  Method 2: perform the steps in the article mentioned below and see if it helps.
  http://support.Microsoft.com/kb/818018/

  Hope this information helps.

• I am getting error #1328 in acrobat XI while trying to install the update.

  I get the #1328 error while trying to install the update to acrobat XI. The error that says that it has not applied the patch for C:\config.msi\PTFBD7.tmp I uninstalled and re-installed acrobat as the help page, told to do, but it will not yet installed the update.

  Sometimes, the questions are about disabling antivirus and be logged in as an administrator. Another tactic is to download updates directly from Adobe at http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows and install manually.