Windows repair is not compatible error while trying to run the Startup Repair tool

Similar Questions

• Windows Vista does not start. I tried to run the Startup Repair tool and we have tried to select start Windows normally.

  original title: URGENT

  How to start Windows Vista when 'Launch Startup Repair' or 'Start Windows normally' did not work? I want to avoid the deletion of my data.

  Hello

  for starters, the info you received a DVD of windows 7 repair vista usage are BAD

  you need a DVD vists or a vista Startup Repair disk repair vista

  and you can NOT do a repair installation of booting from a DVD in vista

  Repair facilities are on within an operating system

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If necessary

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed

• Windows Vista could not start and wants me to run the Startup Repair tool BUT

  It does not work... it takes forever and then asks me to load the drivers... where are they located? I can't find them on my Vista disk or my drivers disk... using a Dell Studio 17...

  When he goes into repair mode it gives a big arrow after about three or four minutes... then in another five he asks for keyboard language, then select the driver...

  where should I go from here? I know that this has already been answered, but I can't seeem to get there

  Here is an article from Dell on how to do a manual reinstall of the operating system (but note this is a clean install and not a system/upgrad repair install so it will wipe clean all the process data): http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?docid=339949.

  If you have an Installation of Vista genuine disc, you may be able to do an installation of repair/upgrade of the system (which would be better than the above option).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version of the system came with SP1 or SP2 preinstalled and the disc is an earlier version, then you will need to make a record of slipstream as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.  If you have problems to install the drivers, read the article above by Dell on how to obtain and install the drivers - it should apply in this case as well.

  If your system is still under warranty, contact the Support technique Dell and they probably have you will help with your problem over the phone free.  If she is no longer under warranty, there are still a few options of support at their Support Center who may be able to help. http://support.dell.com/support/index.aspx?c=us&cs=19&l=en&s=dhs& ~ ck = mn or http://support.dell.com/support/topics/global.aspx/support/dellcare/en/contact_technical_support?c=us&cs=19&l=en&s=dhs.  \

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "There was an error while trying to delete the snapshot"

  I am running VMware Fusion on a 10.5.7 and when I try to delete the old clichés I get this error

  "There was an error while trying to delete the snapshot

  Impossible to clean deleted files:

  The specified virtual disk needs to be repaired.

  It's the performance of FreeBSD. The server has no harm actually run but gets big enough and I would like to clean it up a bit. Any suggestions?

  Thank you very much

  MacGruder says:

  I am running VMware Fusion on a 10.5.7 and when I try to delete the old clichés I get this error

  "There was an error while trying to delete the snapshot

  Impossible to clean deleted files:

  The specified virtual disk needs to be repaired.

  It's the performance of FreeBSD. The server has no harm actually run but gets big enough and I would like to clean it up a bit. Any suggestions?

  Firstly it goes without saying, but I'll say it anyway...  Always back up all of the Virtual Machine with the Virtual Machine within the OS, not suspended, and Fusion to stop closed before trying to make repairs on a virtual hard disk.

  This may not work if it's the basic disk that needs to be repaired and the Virtual Machine has snapshots, but I go through it.  You can try to use "/ Library/Application Support/VMware Fusion/vmware-vdiskmanager ' with the '-r' option.  Note: If the basic disk do not while snapshots are at stake, because it will cause more problems so my suggestion is first try to create a new basic without snapshots disk using the information below (see another option).

  Also one of the reasons to delete a snapshot may fail if there is no adequate free disk space for the operation ends so make sure you have a lot of free disk space.

  Another option would be to create a new basic disk, and then use dd by using an Image of CD/DVD/ISO Linux Live in the image of the old drive so written delta in snapshots to a new basic disk.

  I like to use the ISO Image of KNOPPIX_V5.1.1CD - 2007-01-04 - IN .iso to start the Virtual Machine and use dd to leave because it works well with VMware SCSI virtual hard disks.

  Also in Fusion 2.x, configuration the target Virtual Machine's .vmx file must be changed manually to have the present following parameters when using Knoppix.

  usb:0.deviceType = "mouse"
  usb:0.present = "FALSE"
  mouse.vusb.enable = "FALSE"
  

  Note: The first two parameters may already exist but if the other exists and is set to true, then set it to FALSE and the third are probably already so just add it.

• My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '.

  Original title: can you help me?

  My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

  My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

  You in fact 2 questions.
  I will answer the one who is the most important, for you it is.

  RE: Change startup programs

  You can access this way startup programs...

  Start button > in the search box, type msconfig > Enter > click on Startup tab. Here's your startup programs.
  To disable, uncheck the box in front

  To activate... check the box opposite.

  RE: Windows Defender cannot be found.

  If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
  Bottom line: it's ok. It's normal.
  List of AVs which will stop Windows Defender:
  Norton
  McAfee
  AVG
  Microsoft Security Essentials

  If you don't have AV programs above, here's how to restart Windows Defender:

  Start button > in the search box, typeServices > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows Defender > click Properties >
  in Startup Type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• get the "Connection to the MDEX error" error while trying to open the micro browser

  Hello
  
  I use short tools and Framework 3.1.0 and MDEX 6.3.0.
  
  While trying to open the Workbench UI browser mic to create configurations of page template, I get message drop-down according to:
  
  Connection to the MDEX error. The data service associated with this editor is not properly configured.
  
  Please guide the if you have the slightest idea.
  
  Thank you
  Ben Milot

  I set up different RecordSpotlight editor to use a short instance successfully. What I did is to change apps\ [your app name]\config\editors_config\services\dataservice.json with search short configuration file updated, save the file and run apps\ [your app name]\control\set_editros_config.bat to apply the change.

  To check, you can run apps\ [your order of name]\control\export_site.bat app to export the configuration of your site, updated data service configuration should manifest in the XML of the exported site.

  It will be useful,

  Michelle

• Runtime error while trying to run prgram sample Login.java in order to establish the connection to the Hyperion workspace

  Hello

  I was able to set up compilation SDK and successfully the example program Login.java. But while trying to run it I get the following error: Please help me solve this problem.

  com.sqribe.rm.ReportMartException:GsmNotFound
  at com.sqribe.rm.SessionImpl.convertError (unknown Source)
  at com.sqribe.rm.AASessionImpl.open (unknown Source)
  at com.sqribe.rm.AASessionImpl.internalInit (unknown Source)
  to com.sqribe.rm.AASessionImpl. (Unknown source)
  at com.sqribe.rm.SessionFactory.getInstance (unknown Source)
  When connecting. (Login.java:28)
  at Login.main (Login.java:69)

  Hello

  Check if the GSM service is running. Also check if the user is able to access the workspace without any problem.

  Thank you

  Nirmala

• 109, error network connection error, while trying to install the first instance cs6

  I get an error as described above, while trying to install the trial CS6 version. First time to install on a new computer with Vista.

  any advice / help... ? Thank you

  Solution 1 in troubleshoot Adobe Download Assistant - n_1 http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html#main_Solutio try to reset your download experience.  If you continue to have problems, then you can try the steps listed in http://forums.adobe.com/thread/981369 to launch a direct download of the software.

• Member not found error when trying to add the generic script in the windows 2003 cluster

  I tried to add a generic script in the cluster windows 2003, I've already done a script with the extension .vbs, but when I tried to add the path of the script file its gives me an error indicating that the Member could not be found. Can you help me about this error?

  Hello ishuvbaidhya,

  Your question may be the best answer in the forum TechNet for Windows Server.

  Please transfer your question in forum Windows Server below.
  http://social.technet.Microsoft.com/forums/en-us/winserverManagement/threads

  They will be better able to help with your problem.

  Sincerely,

  Marilyn

• Error while trying to run a visual Basic (.vbp) project in Visual Basic 6.0 with Windows 7 (64-bit) Enterprise saying "error access to registry system.

  Hi guys,.

  In my last computer the VB6 project worked with Windows XP but now I changed to Windows 7 and I can't run some application in visual Basic 6.0 that I still...    (I'm meaning to open the .vbp file to run in the environment of VB6 and not talking is not running the .exe).

  When I open the .vbp (from Visual Studio Enterprise 6.0), then comes an error saying "The system registry access error" only on this Windows 7 (64 bit)...

  I can not changes made in VB6 or compile programs is it my Windows 7?   There must be a solution that I think... something to execute or modify.

  By the Way this is my first post on Microsoft Answers and hope to get lucky on that first and solve my problem; (O)

  Thanks for any information

  M.

  Hello

  1 are logged as administrator?

  2. is it works much earlier?

  Method 1: Try to "Run as Administrator". VB6 needs to access the registry, and user account control sometimes gets in the way.

  Method 2:

  You can check the following link and check if it solves the problem:

  PRB: Error access to the system registry ' Message When displaying VB/VBA references.

  http://support.Microsoft.com/kb/269383

  Method 3:

  As you may have run the program under Windows XP, you can try to run it in compatibility mode and check if this solves the problem. See the following link for more information.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows.

  For additional help with this specific technology, please ask your question to the MSDN Visual Basic Forums.

  http://social.msdn.Microsoft.com/forums/en-us/vbgeneral/threads

  I hope this helps.

• We get a 641 error while trying to install the two updates of windows.

  I get errow 641 and. I can't get two updates to the loaded window what to do

  * Original title: Update window

  Hello

  1. What is the number of KB (Knowledge Base) the two Windows updates?

  2 are you able to install some other updates?

  3. were there any changes (hardware or software) to the computer before the show?

  Please follow the steps mentioned below and get back to us with the results.

   

  Method 1: run the Microsoft Fixit and see if it helps.

  http://support.Microsoft.com/mats/windows_update/

  Method 2: perform the steps in the article mentioned below and see if it helps.
  http://support.Microsoft.com/kb/818018/

  Hope this information helps.

• We get a '0 x 00000074' error while trying to start the computer.

  * Original title: Windows 8 will not start

  I have a dual boot of Windows 8 and Arch Linux - installation.

  Windows suddenly stopped working (after he installed an update and automatically rebooted itself), and currently breaks immediately after the start of set sequences under construction, which gives the following message:
  Your PC needs to restart.
  Please press and hold the power button.
  Error code: 0 x 00000074
  0x00000001
  0x00000002
  0x81668F00
  0x811B39E0
  I tried to do a system restore, but it fails with the following message is displayed:
  System Restore has failed. The system files and settings on your computer did not change.
  Details:
  System restore failed when deleting the following file:
  Path: D:\$MFT\
  An unspecified error occurred during system restore. (0x8007007b)

  Hello

  Bug BAD_SYSTEM_CONFIG_INFO control has a value of 0 x 00000074. This bug check indicates that there is an error in the registry.

  If you use Windows 8 or 8.1 of Windows, I suggest you follow these steps and see if that fixes the problem:

  has) start the computer using Windows 8/8.1 DVD, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
  type b) select keyboard and the correct time .
  c) click on repair your computer in the lower left corner.
  ( d) select Troubleshooting to choose an option screen.
  form e) click Advanced options in the resolution of the problems .

  f) click on command prompt.

  ( g) the following commands and press ENTER after each command line:

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /scanos

  Bootrec /rebuildbcd

  Restart the computer and check the issue.

  Keep us informed on the status of the issue. We will be happy to help you.

• Get a "0x80071ac3" error while trying to delete the .mp3 on Micro SD card 64 GB.

  * Original title: error '0x80071ac3' in Windows 8

  I have a micro sd 64 GB card but every time I tried to put some .mp3 files or even delete what is already on the card I thought it's dirty, I tried to format it still didn't work, I tried to remove it from the cmd prompt also did not work what I do now please with an explanation of the steps to follow.

  Thank you very much I understand your concern.

  Hi Mr.Als,

  -Did you check if the SD card works fine on another computer?

  This problem may occur if the card is damaged. I suggest you run the check disk utility and see if that fixes the problem.

  Run audit on the SD disk utility.

  1. In the start screen, type: CMD, right click command prompt, and then click run as administrator.
  2. At the command prompt, type: chkdsk /r
  3. Exit the command prompt.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  You can also try to unlock the switch and see if it helps.

  Look for the lock switch on the upper left side of the SD card. Lock switch may be a small white or silver tab jutting from the left side of the SD card.

  Keep us updated on the status of the issue.

• Event Viewer error "there was an error while trying to read the local hosts file." file "hosts" but good

  Hello

  In Event Viewer, I see a lot of mistakes like:

  Source: The customers DNS events

  There was an error trying to read the local hosts file.

  I read that threat indicating to rename the hosts for "hosts" file

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/system-log-shows-repeating-error-code-3221225485/3700e855-ded4-4F12-960f-1577f6132c04

  HOWEVER, the name of the file in my computer appears as it should

  C:/Windows/System32/drivers/etc / "hosts".

  and the content of the file is as it is supposed to be according to: http://support.microsoft.com/kb/972034

  What should I do to fix this error?

  P.S. I suspect my computer is compromised. Last weekend, Security Essentials has reported a malicious file backdoor and it has been deleted, but I have a weird behavior of the computer

  Thank you

  Veronica

  Try to re-create the hosts file.

  Open Notepad as administrator (click right on the Notepad icon or shortcut and click Run as admin) and type the following information in it:

  127.0.0.1 localhost

  : 1 localhost

  The '1' in the '127.0.0.1' must be in the first column of the line and there must be at least one space between "127.0.0.1" and "localhost". In the second line, there must be at least one space between ": 1" and "localhost".

  Save the file with name "hosts" in the C:\windows\system32\drivers\etc folder.

  Source: http://www.sevenforums.com/system-security/130518-hosts-file-missing-should-i-worry.html

  You seem to have a hard drive problem. Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

• Error while trying to run and export a mobile application

  Hello

  I'm sucking a problem with Flashbuilder 4.7. I have a project that I need to go on a new machine. I have this project are already working on a Mac, but need to switch to a new Windows machine. The problem when I try to run the project on the new machine, I get an error that looks like this:

  Process terminated unexpectedly.
  
  invalid application descriptor: Unknown namespace: http://ns.adobe.com/air/application/3.4
  
   Launch command details:  "C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\sdks\4.6.0\bin\adl.exe" -runtime "C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\sdks\4.6.0\runtimes\air\win" -profile mobileDevice -screensize 768x1004:768x1024 -XscreenDPI 132 -XversionPlatform IOS C:\flashbuilder\tablet\bin\Ipad-app.xml C:\flashbuilder\tablet\bin
  

  If I create a new project everything works as expected. It's probably something basic, but I'm stuck to it. Any ponters in the right direction would be much appreciated.

  Best regards

  Gregorius

  For Flex SDK 4.6 release notes say that AIR 3.1 is the default value.  See

  http://helpx.Adobe.com/Flash-Builder/release-note/Flex-4-6-SDK-release.html

  If you put a Flex SDK with a latest AIR SDK, it updates the minimum required version, so maybe it's what you see in the preferences.

  To superimpose a Flex SDK, do not use the link you provided, try this one: http://helpx.adobe.com/x-productkb/multi/how-overlay-air-sdk-flex-sdk.html

  Also note that when you download these latest AIR SDK, make sure you download a compatible version of Flex.  The default AIR SDK are not always Flex SDK.

  -Alex