Error with several owners user ID: ImageFrame owned bt PagePageItem and BaseLink

Similar Questions

• Installing agents EM with several owners of oracle

  Hello
  
  I'm planning to install and configure the EM grid control in my environment. How many agents I have to configure if I have several owners of software on any server for example oracle
  
  Server1:
  -oracle9 for Oracle 9i database
  -oracle10 for Oracle database 10 g 1
  -oracle102 for the Oracle 10 g 2 Server
  
  Server2:
  -for Oracle 9i DB ora1
  -ora2 for Oracle 9i DB
  -ora3 for Oracle DB 10 g 2
  
  Do I have to install 3 agents on each server (agent by the owner of the Oracle software) or do I have to install only 1 officer per server?
  
  Kind regards
  Jarek

  Only one agent is enough but before you do you can treatment the following

  Are these users are part of the same group?
  What user and group have the central stock

• I'm stuck with several GB of music files on my phone and I can't get down them!

  The other day I tried to install an application on my phone, but I didn't have enough memory.  My phone is full of music via iTunes synchronisation dock. So I connected it to my computer to try to make some more room. But there is a problem.

  (1) Apple does not play nice with Palm. Synchronization is no longer permissible or possible. I can't use iTunes to manage/delete music.

  (2) in USB Mode, there is no way to access/view the library. It's just not there.

  I tried Palm support, and they confirmed that the USB Mode is not working. I guess that the library is located in a hidden folder or directory. They suggested that I downgrade my iTunes. Goal that is unacceptable to me because one) it forces me to break the license Apple, b) it is not taken in charge, and c) if there is still a remote chance it will mess up my iTunes library, I won't.

  I'm ready to get off at Palm headquarters and throw my phone to their building.

  Can someone tell me how to delete my library without hacking iTunes?

  I thought about it. Support, put this in your KB. Everyone who was sync via iTunes on a Mac is currently STUCK with several GB of music on their phone that they cannot manage or remove, which makes the Palm Pre a lot less useful than announced.

  USB mode is a waste of time for people on a Mac. These hidden files are never going to be visible, and the library cannot be removed. The solution: go through a PC. Anywhere, any PC will do. Connect your phone to the PC, go to the USB drive Mode and show hidden files, then delete them from there.

  I got an old laptop lying around at the bottom, and the problem was solved lickety split.

• error with utl_file for user... !

  SET OF BUFFER 1000000
  SET SERVEROUTPUT ON
  coil LMG_DBmigration_log.log
  Declare
  V_File UTL_FILE. TYPE_DE_FICHIER;
  V_Dir VARCHAR2 (4000);
  V_Filename VARCHAR2 (2000);
  BEGIN
  V_Dir: = "DATAMIGRATION";
  
  DBMS_OUTPUT. Put_line ('start...');
  
  v_filename: = 'LMG_DBmigration_out.txt ';
  V_File: = UTL_FILE. FOPEN (v_dir, v_filename, 'w');
  
  DBMS_OUTPUT. Put_line ("open file... '");
  
  UTL_FILE. Put_line (V_File, 'hey..');
  UTL_FILE. Put_line (V_File, 'I am pc...');
  
  UTL_FILE. FCLOSE (v_file);
  EXCEPTION
  WHILE OTHERS THEN
  DBMS_OUTPUT. Put_line ("an unexpected error: ' |") substr (SQLERRM, 1, 100));
  
  End;
  /
  
  spool off
  pause
  "exit";
  ------------------------------------------------------------------------------------------
  
  When running command, I get error like below...
  
  sqlplus co/co@LMGCO AS SYSDBA @Test_UTL.sql
  
  o/p-
  
  beginning...
  Unexpected error: ORA-29283: invalid file operation
  ORA-06512: at
  'SYS. UTL_FILE", line 488
  ORA-29283: invalid file ope
  
  PL/SQL procedure successfully completed.
  ------------------------------------------------------------------------------------------
  
  kindly help me, if there is no problem with the question of privilege user, then please erase me how to fix it...
  
  Published by: PC on November 26, 2010 05:56

  >
  Yes... "D:\test_co" exists in the local computer and I connect to another server with the help of tnsname.ora
  >
  This is the reason why you get the error message. Oracle search folder "D:\test_co" of the computer server database and not from your local computer.

  You must go to the "172.18.86.10" computer and see what records there. If necessary create a folder "\test_co" somewhere in this remote computer. Then your code wil lstart of work afterwards and folder is created on the remote computer, not on your local computer.

• Firefox running error with several profiles and - no.-remote set

  I created two profiles. One turn firefox 4 and one for firefox 3. I run both for test purposes in an environment of websolution. The profiles are called respectivally firefox4 and firefox3 and these are the only profiles. I changed the shortcuts to read
  Path/to/firefox4/Firefox.exe Pei firefox4-no-remote
  and
  Firefox3 Pei Path/to/Firefox3/Firefox.exe-aucun-distant

  Now I can start two versions of shortcut there at the same time. But when firefox 4 is open (I want to use it as default browser) and I clicked on a link in another program (i.e. a link in an email open in thunderbird or from a twitter app) I get an error:
  Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

  I thought that with you-no-in case of problems of distance options like this. Is there something I'm missing or is there a fix for this problem?

  You cannot use the -no-remote command for a profile that is the ' default browser / profile ".

• Problems with speakers using Bluetooth (a2dp) with several Windows users

  I have the bluetooth speakers (Yamaha NX B02)
  they are easily configurable in bluetooth stack Toshiba everything works
  as long as I use my profile

  If only someone else wants to log on to any other profile (Windows XP Home edition)
  battery Bluetooth pair with the speaker Yamaha

  I disconnect the speakers on my profile
  Speakers are in pairing mode - they are on the list of devices to connect
  but they just don't connect.
  Once they are paired on the profile "User1" on "Laptop1".
  the "user2" or any other on the same "laptop1" aparently is to buy a new set of speakers
  coz this standing right next to him are to be used when you are logged in as "user1".

  First of all I really don't see why the bluetooth stack holds the list of devices, and a different configuration for each user?
  However - is it possible to IMPORT connection parameters of device somehow of my profile to any other
  Or maybe there is something else I should do to be able to pair it with my speakers no matter as to which I am connected now

  Thanks in advance

  And YES - the Yamaha set sounds great - I'm really happy

  Hello

  I m not 100% sure that if I understood exactly you <-->Bluetooth speaker problem.

  According to your message, you can't pair BT speakers during the second use Profil2 if the speakers are already paired with the mer1. Am I wrong?

  Well, in my opinion there are nothing wrong because the speakers were already connected to the laptop using the BT. to my knowledge you cannot connect any BT device if it s already connected using another profile.

  I think you should always disconnect the BT speakers using the mer1 if you use it n t. Then another user using Profil2 would be able to connect the BT speakers.

  Best regards

• GPIB error with several bee feeds

  I use the code of this package of vi:

  http://sine.NI.com/apps/UTF8/niid_web_display.download_page?p_id_guid=E3B19B3E9635659CE034080020E748...

  and I tried to connect two power supplies to GPIB (with one off the power supplies).  When I run the simple Bertan 225 I get the following error code (see attachment as well): 1073676294 and the tension does not read correctly.

  When it is the only bee feeds is connected to the GPIB I don't get an error and the voltage is read correctly.

  Thanks for any help,

  Kevin

  You should not use GPIB with 1 of the 2 instruments turned off. The specification requires that two-thirds of the devices to power. Turn it on and see if the warning (NOT error) disappears.

• Errors with several buttons pointing to the same frame on the timeline. Animate CC

  I have a project where I'm using a function text button to reach a specific image and stop to view, however, if I take a contour of the object and put it on a symbol, I can't have two different objects pointing to the same frame, it generates the error because the frame can be called only by a single button/symbol.

  My solution is to reproduce each of the frames and each have addressed as a new image with the same content.

  Is there a better way to do this?  I'm not fluent Actionscript 3.

  Thank you

  Rick

  You can't have double function names and using the same name/instance for different objects reference is problematic, but you pouvez have different objects "..." pointing at the same time.

  Btn1.addEventListener (MouseEvent.Click, F1);

  btn2.addEventListener (MouseEvent.Click, F1);

  btn3.addEventListener (MouseEvent.Click, F2);

  Function f1(e:MouseEvent):void {}

  this.gotoAndStop (32);

  }

  function f2(e:MouseEvent):void {}

  this.gotoAndStop (32);

  }

• error with several timers

  I basically have a compass and I want to have the pointer to stop every 15 ° for a certain period of time. The first timer works fine, but the rest pause longer. And they vary.

  It's code for the first break:

  Stop();

  var fl_TimerInstance_1: timer = new Timer(1000, 30);
  fl_TimerInstance_1.addEventListener (TimerEvent.TIMER, fl_TimerHandler_1);
  fl_TimerInstance_1.start ();

  var fl_SecondsElapsed_1: number = 1;

  function fl_TimerHandler_1(event: TimerEvent): void {}
  Play();
  fl_SecondsElapsed_1 ++;
  }

  For the second:

  Stop();

  var fl_TimerInstance_2: timer = new Timer(1000, 30);
  fl_TimerInstance_2.addEventListener (TimerEvent.TIMER, fl_TimerHandler_2);
  fl_TimerInstance_2.start ();

  var fl_SecondsElapsed_2: number = 1;

  function fl_TimerHandler_2(event: TimerEvent): void {}
  Play();
  fl_SecondsElapsed_2 ++;
  }

  With the help of Flash CC

  Thanks in advance

  AS3 has setTimeout, which can be much easier to use and less wrong. Try to put this script every 15 frames in your animation:

  Stop();

  setTimeout (play, 1000);

• UID errors with the new update - patch of potential symptoms

  Hello

  Short version - if you did anything to any element within your site from Muse SINCE the upgrade, look here for your solution of problem first. That's where I found mine.

  The long version - first of all, I must say that I am not a doctor so I can't cure what ails you. I can say that I have recently suffered some of the same problems described recently in this forum. In fact, for about a week or two. This is my error: "Adobe Muse CC has encountered an error and will now close. Please report bla bla.

  "With several owners of the UID: SVGPageItem owned by layer and ImageFrame.

  So I checked here and tried some suggestions on the forum visitors and moderators. My site weighs a little over 100 MB so I was not send in to Adobe for them to noodle around in. Call me paranoid.

  What I've done this as the requested message. Report of the last little action. For this I had to reconsider my actions. A new version of the site on February 19, and everything worked well, I had posted by FTP. A couple of days old, a customer sent a text to my site was "funny". Seems that some browsers could not find active made and so there were spaces empty and red x where the images should be. Not on all pages and not all images on a page, just a random sprinkling of the lack of content. So, today was the first time that I could close the door and really look at it. Wow. On first opening, I got 95 missing assets. I tried to recreate a link to an article and excluding Muse would go try to solve each broken link active. Muse never completed this task once in several trials. 1/3 has been progress before max than the above error message could interrupt growth. Then, I went through my files and pulled out all of the SVG content and isolated in a new folder, same directory. Nope. For some reason, I got two JPEG files in question before the message above would end new progress. Muse would not set just one active and stop, hell no. He feels the need to save me time, and so he tries to update ALL the missing links of the asset. Stop already nicaise? Another bonus to this was that muse not would you save other changes to your site once this issue of missing property has begun. I couldn't save it as. Now, I'm really stuck.

  I go into the files and look at the assets through my BONES and see nothing unusual.

  I try to open again the Muse and access the screen on missing assets and ignore it by going to file - open Site - name of file - open. I am able to see the page sitemap for my site. I go to the active panel and am able to recreate a link to my jpeg and png in all files except the main images folder. Muse crashes again. I open it again. Open a page (random selection) and go to the layers panel, select an asset I know is on the list to re-release select it. Success. After spending and manually reissue of active links individually, I could save my site without change of name.

  I closed and reopened and everything works as it should. I'll get some lunch now and trying to all download after lunch.

  If all goes well this will be the only post.

  No news is good news.

  I got a different error message towards the end but that was eliminated in the reissue of individual links of the assets.

  This is an image file with messages.

  

  An update was released today, please install the latest update.

  Adobe help Muse | Release notes | Adobe Muse CC

  Thank you

  Sanjit

• txt on the new iPad 2 Air messages only works with other Apple users.   How to send and receive SMS users iMessages?

  I can only use iMessage on my new iPad Air 2 with other Apple users.    Why can't send and receive text messages with SMS people?

  You need an iPhone and then use continuity iOS features to do - continuity use to connect your iPhone, iPod touch and Mac - Apple Support

  An iPad is natively unable to send SMS text messages such as those that require a connection of cellular voice channel.

• Error handling in QMH projects with several sources of error

  Hi guys,.

  I have a head scratcher:

  QMH architecture, I have a state machine that describes a certain task of legislation on different instruments.

  Each of these instruments has its own message loop vi management and each of these loops could cause errors.

  I want to pass these errors to the state machine (VI main if you want) in order to take appropriate action or - at least - inform the user what the error instrument came. Currently, I use a global variable for each error source and merge errors in primary VI.

  Problem: Multiple errors, only the one connected to the first entry of the fusion VI errors is displayed.

  What is the best way to get errors from several sources to level superior screw and keep all the error information for debugging purposes?

  Thank you!

  
  

• All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

  All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

  Script launched in until OS user 'A' on the 'A' server which launches sqlplus, then connects to a remote database through a service of tnsnames.ora as another user of the database and the results of this script are spoulées on the server "A".

  The file queued on the old server is written with rw-rw-r: read write user, group read the writing, reading and possession header that is the user of the OS. The file queued on the new server is written to rw-r-r user: reading writing, reading group, public reading and ownership oracle: dba.

  "" The user then has no privileges to modify the file and continue the process of transmitting the file, editing and deleting the file for the next set of commands. This allows us to keep the possibility to migrate to the new server we are unable to process orders.

  $ORACLE_HOME/bin/sqlplus - s user/password@prd1 @./script/CustomScript/R12_OM_UFPC-oracle.sql

  Background: old server running 4.8, Oracle 10.2.0.4 OEL

  New server running OEL 6.5, Oracle 11.2.0.4

  Tested so far:

  File and update umask to 0002 instead of 0022 is now generated as rw-r-r. However, the property is still oracle: dba.

  Update of ownershipt of $ORACLE_HOME/bin/oracle.exe of oracle: oracle (edi added the user to the oracle group) and chmod 6751 oracle.exe. This created several problems where crucial scripts, that is to say of sqlplus failed to run.

  Added! chmod 755 output.file.name - OS user 'A' is not allowed to change to mod.

  Added! command cp MV output file and that generated the file as a user of the operating system: oracle. It is a potential work around in case of emergency, but the developer would have to rewrite the countless scripts.

  Any ideas?

  I have reproduced the behavior of the old server and am able to spool a file via sqlplus under OS user. No changes have been made on the remote database server. All the changes have been on the new server hosting a small 11.2.0.4 database on a server running OEL 6.5 32 - bit OS.

  (1) removed the sticky bit $ORACLE_HOME/bin/sqlplus using chmod u-s, g-s, o - s suggestion of Billy ~ Verreynne

  (2) modified the main group for the 'oracle' user match the user operating system applications, while maintaining membership in the groups 'oracle' and 'dba '.

  -We are dealing with here EDI processes, so the Group was called edi.

  (3) modified property of the files tnsnames.ora and listener.ora for oracle: edi

  (4) restart the receiver

  (5) disconnect / reconnect

  Script runs as expected, the output file contains the correct ownership and permissions.

  Thank you all for taking a look and offering options.

  -Josh

• Functions defined by the user with several parameters

  I set features three following user using "Define."

  UF1 takes a single patameter;

  UF2 takes two parameters;

  and UFX takes two parameters - with the second is 'X' in the definition.

  

  Œuvres F1.  F2 is the EVAL of F1 version and it works too.  User functions only seem to work fine.

  F3, a function of two user settings, produces a graph of NaN.

  F4 is the EVAL of F3 version.  Note that 'B 'is not replaced by 1'.  Also produces a NaN chart.

  F5 produces a graph of NaN.

  F6 is EVAL of F5.  The 'X' is not replaced (even with the ' B' above), and even if it looks like 'X * X', it also produces a graph of NaN.

  

  Is it possible to get defined by the user, with several parameters, features work by tracing the curve?

  Hi!, Fortin:

  If you download and install the ultimate Firmware with the version of the software: 2015 6 17 (8151), with the number of Version: 1.1.2 - 11, you can trace your examples of definition of the function, with curves and values, without NaN.

• Carpet * a DVD-Ram UJ - 841S comes with several error messages

  My laptop is relatively new, I've been burning some video files in DVD - RW and all of a sudden my DVD drive has stopped working. It came with several error messages format "failed due to damage media", "format failed due to general failure" and "the inserted disc is READ only".

  I also can't rip music discs.

  Can you see ODD listed in Device Manager, and if so what is the exact status it?

  Sorry, but we discus on ODD, but nobody knows what model of laptop you have and what is the history of this problem. Is replaced the drive? Why are you sure that you are using compatible with your laptop ODD.

  Please more information!