establishment of a network wireless home

Similar Questions

• Problems connecting to a Satellite Pro 4600 for network wireless home

  Hello
  My computer has a processor Athlon 64 x 2 4200 + and 2 GB of RAM, with XP2 Pro. I have a Linksys WRT54GS broadband router and connected with Virgin Media.

  My daughter gave me an old laptop a Satellite Pro 4600 with a 747 MHz Celeron processor, 384 MB of RAM and XP2 Pro has an Intel Pro/100 VE Network adapter. I set up a Linksys Wireless - G Notebook Adapter with SRX (model No. WPC45GX), so that I could use around the House. However when I try to connect to the home network, although he "finds" a list of networks, I am unable to connect and get an error message - "Windows cannot connect to the selected network (my home network). The network can be is no longer in range. Please refresh the list of available
  networks and try again. »

  I tried to connect with laptop computer in the same room as the router, but get the same message. In the Manager of peripheral devices, network cards, the two are shown and both work properly, but in the taskbar there is a red cross shown on the two icons, they say that a network cable is unplugged, but I don't have a cable network.
  The other tells me that the wireless is not connected.

  I presume that the adapter works as it can 'see' wireless networks, I used Lynksys support to verify that all router and adapter settings are correct.
  My wife has a new laptop and is able to connect to the home network with no problems.

  Please can someone offer advice or assistance.

  GMC

  for some reason, you need to turn off your wired connection (cable) and use the client of the PCMCIA wireless network card. Maybe just the problem that your system can not separate the two network connections and gets an error it s. You should also visit the site Web of Linksys and download the latest driver and the customer for the card, so you can make sure that the software is up to date.

  Another good idea would be to visit www.microsoft.com and the support center for any 'knowledge base documents' which could probably solve the problem.
  As your machine is really old and no one is using PCMCIA cards more, you may wait a long time for an answer in this forum. Maybe you should check the site from linksys for a support section. Maybe they could help you...

  Welcome them

• Cannot connect my Photosmart C4780 to my network wireless (home)

  Hello

  I searched this forum and tried to solve my problem, but none of the elaborate suggestions.

  I have a Photosmart C4780 and am under OSX10.8

  Recently, our internet provider changed our wireless router and our SSID. As a result, the printer that is connected to the original network and properly functioning has stopped working. I tried to connect the printer to the new network, but failed. He said now that the printer is connected to the hp network (something) and I can't change it for the new SSID.

  Could you please tell me what to do? I have installed the software mentioned in the HP website, plugged the USB cable into the printer to try to set it up, but it says that the printer cannot find any existing network (although I'm next to the printer and connected to the intended network wireless)

  Fact a little kind of hard-reset on the printer can be a good strategy? How can he do?

  Thanks in advance

  Pedro

  PS: The printer works correctly when printing via USB

  PS2: It is not an option to return the SSID of the router to the previous

  Hi @pedroa

  You say "I have installed the software mentioned in the HP website", but there is no software for the compatible with 10.8 c4780. Mountain V10.8 OS X Lion: installing and using the printer on a Mac with the Mountain Lion.

  As you know, this printer has not a wizard wireless version in the front panel instead us would typically connect the USB cable from the printer to the computer and run the installation wizard.

  Because you have 10.8 on Mac, and it there is no full feature software and drivers, you won't be the configuration wizard, to configure the printer. You may be wondering now, well how can I set up then?  Good question, we will restore the default network printers and the printer will have its own IP address designed for whats called an Ad-Hoc connection (wireless router). We will put the computer on the network printer and then print a report to get the printers IP address. At this point, we can access the built-in web server (EWS) and run the wireless from there. Once the printer on the network with the router, we can put the computer on the network and vuala that the printer and the computer will be on your network.

  To restore the default network settings - since you have done this before I guess you know how, but for others who can see the message, here are the steps

  1. Press the wireless button
  2. Select wireless settings
  3. Scroll and select default network.  Press Yes to recognize
  4. The radio turns off (the blue LED turns off).  You may need to press the wireless button to turn on wireless

  Put the computer on the network printer (temporary)

  1. click on the symbol of the airport on the upper left side of the screen Mac
  2. choose the network looking compared to the printer (we could say a variant of the name of your printer or HP setup) - it may take a few minutes to make it appear

  Print the wireless network test - wait a few minutes to make sure the computer have established an ad hoc connection, otherwise the report will not have an IP address

  1. Press the Scan button (it also the wireless menu button)
  2. Select wireless settings
  3. Testing wireless access, then select.

  The wireless network Test prints, search and note the IP address.

  Open a browser (Safari) and enter the IP address in the URL (address bar).

  Click on the network, on the left tab, click on wireless or 802.11.

  At this point, we are looking at fore 'start the wizard' should be on the right side.

  

  As soon as we will have to set up the printer to your network, you can put your computer on your own network.

  Now you can add the printer in system preferences and print

  Please let me know if that fixes the problem, thanks.

• DeskJet 3745 on network wireless home

  Hello

  I have a deskjet 3745 attached to a desktop running XP.  The printer is set up as shared.  I just bought a laptop running Windows 7 and I want to be able to print from it on my home network to the deskjet printer.  (I do from another laptop under vista, so I know that the network is OK)

  When I try to put in place, the laptop sees the printer but gives me a message that "windows update cannot find the driver" and a request for the location of the driver.

  I tried to connect the printer directly to the laptop - it installed the driver and worked fine, but when I go back to the old configuration (printer connected to the desktop computer) the same problem arises and he asked again for a driver location...

  I also changed the port for the local installation of the printer to \\DesktopComputer\Printershare.  The printer always show offline

  I've seen this problem on other forums, but no answer questions!

  Help would be appreciated

  Thank you!

  Now fixed-, for some reason, this works if you go back through the printer Installation Wizard and select the newly created local port

• HP Officejet Pro 8500 has more: I need help to setup windows fax and scan on a network wireless home

  I'm stuck in the box of / address of the fax server in the Windows Fax and scanning configuration wizard. Where can I get this information? I think I can finish with this info.

  Hello

  Windows Fax and Scan allow scanning from Windows, fax of the printer can be done by the HP Officejet Pro 8500 A910 software or Print Fax - printer HP Officejet Pro 8500 A910.

  Windows Fax and Scan to allow fax when your PC is equipped with a fax modem that you can find below:

  http://Windows.Microsoft.com/en-us/Windows/set-computer-send-receive-faxes#1TC=Windows-7

  Follow page 58 of the user guide below to send a fax from your computer using the HP device all in one:

  http://h10032.www1.HP.com/CTG/manual/c02668142

  To receive faxes on your PC follow the section "to set up fax to PC (Windows)" on page 69 of the instructions.

  Kind regards

  Shlomi

• Cannot connect to the home network wireless hp 6910

  I can connect anything either but my hp (compaq) 6910p to my network wireless home.  It will connect to the network unprotected to a neighbor, but not my own.

  Hello

  I suggest you follow the steps in this link to solve home network problems:

  http://support.Microsoft.com/kb/308007

  It will be useful.

• why I can't connect samsung galaxy s 3 to my wireless home connection

  Nice day

  Hello
  1. what happens when you try to connect?
  2 - is the wireless connection works fine?
  If the problem is specific to the Samsung Galaxy phone connection, I suggest you to contact the manufacturer for assistance on this issue.
  Support
  http://www.Samsung.com/us/support/
  See also:
  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx#fBid=QrmrthWykWS

  Start Galaxy S III Guide

  http://www.Samsung.com/us/article/Galaxy-s-III-Starter-Guide

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

• can receive bur can't send emails on my laptop wireless home network

  When connected to my work network or to use the iphone as a modem I can send/receive emails. When connected to wireless home I can receive but not send.

  When I do a self-diagnosis, it says THE LAN is not connected. Also I can send/receive my gmail account but not my business account?

  Any ideas?

  Hello

  ·        What operating system is installed on your computer?

  ·        What service provider or email client do you use to access the e-mail?

  ·        Are you connected to any server?

  If you use Hotmail, then post your query to the following forum:

  http://windowslivehelp.com/product.aspx?ProductID=1

  Reference: http://windowslivehelp.com/

• Can I use my network wireless at home I don't have a problem, but when I use it at work I get the message window explorer cannot display the webpage

  Please help I can use my network wireless at home I don't have a problem, but when I use it at work I get the message window explorer cannot display the webpage and the worl tour plan has a red cross on it can you help me solve this problem

  Hi susanearle,

  You can try the steps in your previous thread about this problem?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/have-wireless-connection-can-only-connect-from/12a7163c-A54D-4894-81F7-bd4fb92b2da4

  Please let us know, thanks!

• I have a computer 2 wireless home phone network, only administrator there?

  I have a wireless home network and I got a connected laptop. I added another one last week and I don't have administrator rights. I have no firewall or virus. I just want to know how to give the two pcs of admin rights so I can update my other laptop. We have administrator and the other not.

  I have a wireless home network and I got a connected laptop. I added another one last week and I don't have administrator rights. I have no firewall or virus because I can't access administrator? the two laptops running xp and are dells and both are connected to a router belkin on suddenlink cable. How to give administrative rights for both computers?

  It is quite easy to stop the menu "Select the hardware profile" to appear... Once you get connected to Windows.  Your post is not clear is whether or not you can do.

  What do you mean by "the other login page. the only user I know is the lowest user in the book?

  What version of Windows XP is on each computer (Home, Pro, Media Center)?  If you can connect to Windows, made a click right my computer and select Properties.  Also a report of the service pack.

  If you use the built-in account named 'Administrator' for daily use and connect your computers between them and the Internet "without protection of firewall or a virus", you should probably do a clean install of Windows on both computers.

  If you have important data on computers it back up to an external drive and scan with good antivirus and anti-malware applications before copying this back on your computers (after install it clean).

  Contact Dell for instructions on reinstalling Windows.

• My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network.

  My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network. This started after my last Microsoft update has been installed. .

  original title: status: network address acquisition
  Hi BKlap,
   
  Try these methods in the order.
   
  Method 1: Repair the network connection to solve the problem.
  For more information, see:
  To force a network adapter to acquire an IP address
   
  Note: The information in the article applies to Windows XP Home Edition as well.
   
  Method 2: Follow the steps listed in this article to resolve the problem:
  How to troubleshoot connectivity TCP/IP with Windows XP

• My wireless home does not appear on as a network available on my work laptop and always did before.

  My wireless home does not appear on as a network available on my work laptop and always did before.  He brings up and connect on my laptop. I have a Linksys broadband router - summer use it for at least two years with no problems until this.  I know that my wireless works on my laptop because there is an unsecured network listed in the available window.

  A really strange thing that happened two weeks ago (and I don't know if it's related) was my personal laptop was fine during several hours - then he kept abandonment of the internet connection.  I couldn't keep him connected - reboot etc didn't work.  I've not logged again until today - and that's what I use now.  He connected very well today.

  My work laptop had been connected to my wireless ealier in the week, but when I tried to connect as usual Thursday night he has not logged automatically as it has always done in the past.  Nothing has changed.  Security patches that my company had sent through this week have not downloaded until after that I tried to connect and couldn't.  There is nothing new - he had no reason to think I should not have automatically connected as I have in the past.

  Hi suemoo,
   
  -What version of service pack of Windows XP you are using?
   
  This problem occurs because the media connect action is not sent to the wireless service correctly.
   
  Method 1: Disable and then enable the wireless network adapter and check if it helps fix the problem.
  To do this, follow these steps:
  a. start the network connections tool in Control Panel. Click Start, click Control Panel, click on network connections and Internetand then click on network connections.

  b. right click on wireless network connectionand then click disable.

  c. right click on wireless network connectionand then click enable.

  Method 2: Try the methods listed in the following article and check, if it helps in fixing the issue:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

• Need to connect to the home network wireless - Windows XP Pro - error with network password - needs to be 40bits or 104 bits...

  I have a new laptop at home which has windows xp sp 2 is installed.  I am trying to connect to my wireless network.
  I get the following error;
  The network password needs to be 40bits or 104bits depending on your network configuration.  This can be entered as 5 or 13 ascii or 26 hexadecimal characters.

  I gave my father a new laptop computer this fall and he gave me one that had given him his friend... I've never worked with XP Pro...

  We have several other phones on this account wireless at home.

  You try to login with the wrong encryption method and you have this implemented extremely secure wireless network.

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing. MS - MVP - Elephant Boy computers - don't panic!

• Add Windows XP to a wireless home network

  Hi just to add a lapttop XP to a wireless home network. the network icons are shown as they are always posted on vista and windows 7 and is there a centre network for xp

  so do not know if the connection is correct. In addition, the Dungeon of connection keep out and reconnect. any help please

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi Vanchoch,

  Please visit the following link for instructions on how to connect a Windows XP-based computer to a wireless network:
  http://www.Microsoft.com/windowsxp/using/networking/setup/wireless.mspx#4
  With regard to the abandonment of the connection, I highly recommend download the latest drivers for your wireless network card. If you can get me the model number and the company that makes it, I can normally provide you with a link to the driver.
  In the meantime, the following link can provide some advice on troubleshooting for your connection:
  http://support.Microsoft.com/kb/870702
  Please let me know if I can be of further assistance!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 2 PCs, PC2 connects via connects the PC1 wireless Internet wireless, network sees home, but will see no internet except with ethernet cable - illogical!

  1 computer (PC1) running Vista, to date, AVG free, Spybot S & D the timer running
  2 may have been infected with spyware by surfing - received message in the Explorer to search for the virus, think it was fake
  3 then lost wireless internet in the two IE & Firefox
  4 but had a Skype conference call minutes 40 OK - Bizarro
  5 lit (PC2) laptop running Windows (light version) 7 - same problem with browsers
  5A AVG on PC1 has been updated - ran a deep analysis, found 44 spywares & fixed them
  5 b also ran registry cleaner
  6 has managed to update Spybot, is all business, then working browsers, internet connection complete
  7 can now connect 1 PC to internet with ethernet connection, he can see the wireless and home networking (local access only) so I guess the wireless work, but he can not see the internet on this subject.
  8 update both Spybot and AVG on PC1 with wired ran the two found no additional infection
  It's really strange, I do not understand how to see PC2 PC1 and PC2 connected wireless to wireless home, but PC1 is unable to connect to the internet without a network cable...
  All pretty useless Windows diagnostics

  Hello

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there are utility wireless isn't running with the native Windows wireless utility provider (Service WLAN).

  ----------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP (network IP number) of work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.