ESXi 5.5 only 4 TB usable for the data store
Hi all
Although in vSphere Client 5,46 TB of capacity is visible, I can only use 3.64 TB to a data store.
Configuration:
-HP Proliant Microserver N40L
-HP Smart Array P410/512 MB BBWC, FW 3.66 Controller
-4 x 2 TB as a Raid5
HP-ESXi - 5.5.0 - iso - 5.72 A
I read a lot of articles on > limits of 2 TB of older versions of ESXi or controllers, limitation of 4 TB of c# vSphere Client, old firmware and esxi driver problems, etc.
But I could not understand the problem.
The P410 controller shows 5.5 TB:
~ # esxcli hpssacli cmd - q "controller connector = 1 see the config.
Smart Array P410 in slot 1 (sn: PACCRID110510NR)
Array A (SATA, used space: 0 MB)
logicaldrive 1 (5.5 TB, RAID 5, OK)
then 2I:0:5 (port 2I:box 0:bay 5, SATA, 2 TB, OK)
then 2I:0:6 (port 2I:box 0:bay 6, SATA, 2 TB, OK)
then 2I:0:7 (port 2I:box 0:bay 7, SATA, 2 TB, OK)
then 2I:0:8 (port 2I:box 0:bay 8, SATA, 2 TB, OK)
MS (Vendor ID PMCSIERA, model SRC 8x6G) 250 (WWID: 5001438013D9F37F)
ESXi obviously knows the same size:
~ # Esxcli storage core devices list
NAA.600508b1001ca5e68adc0bc4bc508d6e
Full name: Serial Attached SCSI disk HP (naa.600508b1001ca5e68adc0bc4bc508d6e)
Definable display name: true
Size: 5723091
Device type: Direct access
Multichannel plugin: NMP
Devfs Path: /vmfs/devices/disks/naa.600508b1001ca5e68adc0bc4bc508d6e
Vendor: HP
Model: VOLUME LOGIC
Review: 3.66
SCSI level: 5
(etc.)
But does that 4 TB:
~ # df h
Size of filesystem used available use % mounted on
VMFS-5 T 3.6 2.1 T 1. 5 t 58% / vmfs/volumes/mainstorage
vfat 249.7 M 177.2 M 72.6 M 71% / vmfs/volumes/aeda2aeb-c934ad60-46ce-cb77abdfabaa
vfat 249.7 M 175.9 M 73.9 M 70% / vmfs/volumes/c8ace7e9-a96a5914-16 d 4-a697ad4634d9
vfat 285.8 M 191.4 M 94.4 M 67% / vmfs/volumes/55d7af6e-a25f7c97-c3ec-6805ca0de93c
I tried to increase the size of the data store, last used area was 11720890367 and last sector was 11720890510 which doesn't really seem to translate into an increase of 1.8 to.
Thanks for your help.
DC
Your output, it shows that there are two partitions vmfs
3 10229760 3907029134 AA31E02A400F11DB9590000C2911D1B8 vmfs 0
4 3907031040 11720890367 AA31E02A400F11DB9590000C2911D1B8 vmfs 0
A partition with 1.8 to and another with 3.8 to. That's the reason why you see only 3.8 to
I don't know why the 1.8 to vmfs volume is not list anywhere (which does not appear in the list of file system of storage of esxcli also). Do you have any before partition created manually. If you think that if there is no data in this 1.8 to vmfs partition you can remove it by using the partedutil command and then use this free space to extend the existing 3.8 to. But do not forget before you delete the partitiaon
Tags: VMware
Similar Questions
-
get support scsi LUNS for the data store?
I've been delving into the different classes available to HostSystem.queryHostConnectionInfo () and none of the properties appear to contain the id of naa I see when I look at LUNS on an HBA. How do you get to LUN support for a data store?
Figured it out. For anyone else who wants to know:
I created two actions, one to return a hash of the id of naa-online data store object and another action to return a hash of the naa-online drive scsi id
// actions //getDatastoresKeyedByLUN var o_diskHash = new Properties(); for each (var scsiDisk in u_host.config.storageDevice.scsiLun) { //System.log("-> LUN: " + scsiDisk.canonicalName); for each (var dataStore in u_host.datastore) { if (dataStore.info.hasOwnProperty("extent")) { for each (var scsiDiskPartition in dataStore.info.vmfs.extent) { if (scsiDiskPartition.diskName == scsiDisk.canonicalName) { o_diskHash.put(scsiDisk.canonicalName, dataStore); } } } } } return o_diskHash; // getScsiDisksKeyedByLUN var o_diskHash = new Properties(); for each (var scsiDisk in u_host.config.storageDevice.scsiLun) { o_diskHash.put(scsiDisk.canonicalName, scsiDisk); } return o_diskHash; // in workflow for each (var can in dstoreMap.keys) { System.log(dstoreMap.get(can).name + "(" + lunMap.get(can).canonicalName + ")"); }
-
permit request for the data store
I recently bought a license of data store for my virtual machine host. My question is, can I just replace the current key on existing servers with the key data store? Also, is the key to good for the 2008 and 2012 on the host servers?
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Maximum of storage for the data store?
Hello
I have a server configuration with a hard drive 2 TB Raid 1 mirror set. I installed hypervisor on it without any problem. When I go to configure a virtual machine, I can't put the main virtual C drive beyond 256 GB or 0.25 TB. A few reasons why this is happening?
The drives are SATA.
Thanks in advance for your comments.
Hello
because you have formatted your VMFS Datastore with a block of 1 MB, which will result in a maximum size of 256 GB.
Reformat your VMFS with a bigger unit.
See:
Concerning
-
can't see vm after upgrade to esxi 3.5. VM folder exists on the DATA store.
Test env.
I upgraded to esx3.5 esxi
When installing, I had an option to leave vmfs partition. After installation I don't see the VI client machine.
Of course, I in/vmfs/volumes/datastore1/2003-1 with vmdk and etc.
How to access the machine?
Thank you.
Hello mla!
It seems you need to re-register the virtual machine. Two ways to do:
(1) of VIClient, go to Configuration / Storage select your datastore righ - click on, choose Browse, navigate to your directory of the virtual machine, select the .vmx file and do a right click, then chooose "add to the inventory.
(2) in the other direction its the COS. Log in and use the command: registry of vmware-cmd - s < full-path-to-the-VM-.vmx-file >
Hope helps.
Ciao
-
Name of device for the data store list
Need help with this simple script
$datastores = get-Datastore-location "CXXV. Where-Object {$_.ExtensionData.Info.GetType ().} Name - eq "VmfsDatastoreInfo"}
$myColCurrent = @)
ForEach ($store in $datastores)
{
$myObj = "" | Select-Object Name, devicename
$myObj.Name = $store.name
Write-Host $myObj.Name
$myObj.devicename = $store.ExtensionData.Info.Vmfs.Extent.DiskName
Write-Host $myObj.devicename
the name of the data store is writtenl properly but the devicename is empty and get this warning:
WARNING: The 'Accessible' type of data store property is obsolete. Use the property 'State '.
Strange thing is that the Script works lab powercli linking the vCenter lab. But gives the error in the production powecli server to vcenter prod. powercli and vcenter server versions are the same.
Help is greatly appreciated
The extended property is an array.
Try to change this line
$myObj.devicename = $store.ExtensionData.Info.Vmfs.Extent.DiskName
in this
$myObj.devicename = [string]: join (",",($store.ExtensionData.Info.Vmfs.Extent |) %{$_. DiskName}))
You can safely ignore the warning messages, or may disable them with the Set-PowerCLIConfiguration cmdlet and the DisplayDeprecationWarnings switch.
-
Command or a script required for the data store, the identifier of NAA and multipath
The following script/command gets me politics multichannel on a csv file, however, I need to also identify the "Datastore" name with the number of naa.
Get-cluster 'windows 01' | Get-vmhost | Get-scsilun - luntype disc | Export-csv c:\lun_multipath.csv
any help would be appreciated.
Try something like this
$datastore = get-datastore $disks = get-cluster 'windows 01' | get-vmhost | get-scsilun -luntype disk$entry = @()$output = @()ForEach ($disk in $disks){ $entry = "" | Select DataStorename, HostName, Canonicalname, Multipathing $entry.datastorename= $datastore | Where-Object {($_.extensiondata.info.vmfs.extent | %{$_.diskname}) -contains $disk.canonicalname}|select -expand name $entry.HostName = $disk.VMHost.Name $entry.canonicalname=$disk.canonicalname $entry.multipathing=$disk.multipathpolicy $output += $entry}$output | Export-csv c:\lun_multipath.csv
-
Cannot download the files of the virtual machine for the data store
Hello
I get an error message "connection to the server timed out" while I'm trying to download the files from the virtual computer from the data store.
Although the ESX and my laptop are on the same network, I get this error message.
Please let me know if I need to take care of something.
Thank you.
I think that hard & .vsmp be used & locked is why you are unable to download it. Try to download the file, whereas the VMs system is turned off
vcbMC - 1.0.6 Beta
Lite vcbMC - 1.0.7
-
Increase the volume for the data store
Hello
Someone recognizes this problem?
When you try to increase a volume of data store in vSphere4 we get the following message: "error during the configuration of the host. Failed to get the disk partition information.
We use a MSA2324 of HP storage as a storage (data store) to our servers of vSphere. I increased the volume of the utility interface HP Storage manager 1.5 TB to 2.2 TB. So far so good. But when I try to increase the datastore in vSphere, this error message occurs.
I've done this before, but now it doesn't seem to work. We have 25 active servers attached to this data store. I REALLY want to increase this volume online. It will probably work if I stop all virtual servers, restart the server VSphere and then increase the volume.
Concerning
Magnus
Maximum supported LUN size is 2 TB minus 512 b.
---
VCP MCSA, MCTS Hyper-V, VMware vExpert 2009, 3/4
-
I am writing a script to determine the way to read and write rates, the average number of read and write average requests read and write latency for each data store.
I tried to do two different ways, with my numbers to end 0.
$startdate = (get-Date-time Minute 7 - 0 - 0 second). AddDays(-1)
$enddate = (get-Date)
$datastores = get-datastore
{foreach ($DS in $datastores)
#1
= [string] $dswriterate ([Math]: Round ((($DS.datastore.write.average |))) Measure - Object - average value). Average), 2))
#2
= [string] $dswriterate ([Math]: Round ((($DS.write.average |))) Measure - Object - average value). Average), 2))
}
I understand that Get-Stat does not work with a store of data entity. It would be great if I could get help with that!
That is right.
You can use my Get-Stat2 function to retrieve available data store counters.
See monitor the size of your vDisks
With the QueryMetrics switch you can see which parameters are available.
-
View the number of paths and the political path for each data store
Hi all
Seem to be stuck on this one. and all that seems to be able to find through topis and scripts for the air path setting. All I have to do is list each data store to its policy of access road and the number of path for the data store on the host computer.
I'm gussiing it uses the get-vmhoststorage cmdlet?
Any help much appriciated.
Phil
Try something like this
Get-VMHost | %{ $esxImpl = $_ $_ | Get-ScsiLun | where {$_.LunType -eq "Disk"} | %{ $_ | Select @{N="HostName";E={$esxImpl.Name}}, @{N="Path";E={$_.CanonicalName}}, @{N="Policy";E={$_.MultiPathPolicy}}, @{N="Number";E={($_ | Get-ScsiLunPath).Count}} } }
____________
Blog: LucD notes
Twitter: lucd22
-
Installed photoshop elements only on two PC. for the third it is said maximum number used what to do?
You can also check "Activation limit reached" or "connection error impossible ' with Adobe applications
Concerning
Hervé Khare
-
install esxi 4.1 and the data store on the same server
Hello
I want to install esxi 4.1 and the data store on the same server.
My problem is that I can't make partitions to really separate them and I would reinstall esxi without wiping the data store.
Y at - it another way to put a record out of the raid only to install esxi.
I also do not install on a USB key.
Thank you
AZEL says:
Hello
I want to install esxi 4.1 and the data store on the same server.
My problem is that I can't make partitions to really separate them and I would reinstall esxi without wiping the data store.
Y at - it another way to put a record out of the raid only to install esxi.
I also do not install on a USB key.
Thank you
AZEL,
Can you give us more details about your current environment? What is the size and the data store space used? Do you have any storage of additional network attached to the host (for backup purposes)?
My assumptions of your post do you have 1 stand-alone host with ESXi 4.1 aready installed and you also have a local data store on the same host, but you want to re - install ESXi 4.1 while keeping the contents fo the data store. Is this correct?
-
where can I find an email for the Apple Store? Carl
Hello
Where can I find an email for the Apple Store?
Update was not available with this Apple ID either because it was bought by another user or the item has been refunded or cancelled. There was an error in the [[Store. I don't want to lose my money, which is more than 100 euros.
Help, please.
Carl
Please test after each of the steps that you have not already tried it. Stop when the problem is resolved. Back up all data before making any changes. Remember, no one here is Apple or can help in problems of service the customer.
Step 1
If you have recently changed something in your Apple ID account (for example, the password), log out of the App Store and reconnect.
Step 2
A purchased app can only be updated by logging into the App Store with the same identifier Apple which was originally used to buy it. There is no way around this restriction, which applies also to the free applications. If you can not connect to help ID the buyer, remove the app and reinstall it. You will have to pay for it, once again, as appropriate.
Step 3
If you receive the alert when you try to update a grouped iLife application, select the shopping page in the App Store and find the application in your purchase history. If there is a button marked ACCEPT on the right, click on it.
If you have a used Mac, bundled apps related to Apple ID of the original owner and may apply to you. Reportedly, customer service has published codes redemption to some owners of second who asked, but it is not guaranteed.
Step 4
If you try to update the iLife or iWork applications that were installed from a purchased DVD, or if you have a refurbished Mac purchased directly from Apple, contact App Store customer service for a redemption code. If necessary, you will be asked for the part number of the DVD.
Step 5
In the App Store menu bar, select
Store ▹ view my account
Enter your Apple ID to the command prompt. In the lower right corner of the window that opens, click the reset button. Close the window.
-
best way to put up a second NETWORK adapter for the data on NAS Server store
I want to add a second NETWORK card if I can get the best possible performance for when I move the data store of the ESXi host to the NAS (which will also have a dual NIC). What is the best way to set up the NETWORK card on the ESXi host to achieve?
PS - I am aware that I am limited to the real network speed of 1 Gbps and conditions and I agree with that (any of the virtual machines are eager resources or production).
SOLVED... I think so. JPM300 got on the right track, but I was still not clear on it so I googled all this involving and finally landed on an iSCSI with MPIO configuration. I ended up as a result of this article (I use a Synology DS415 +, but the steps are pretty universal): How to use iSCSI targets on VMware ESXi with Multipath i/o - SynologyWiki. The article is old but always worked perfectly for me. I checked the two paths/NIC are used simultaneously, but I did not actual test to see if I have 200 MB/s of bandwidth (I've seen 80 MB/s when the cloning of virtual machines to the new iSCSI data store using vmfstools).
I ran into a problem where the second path is not added during the alternating market; I removed the path shown and then was able to add the second path, then the first path again.
Hope this helps someone.
Maybe you are looking for
-
Load automatically missing Images
I can't configure the browser in a State where no images are loaded. As the same option in Microsoft Internet Explorer. There is _no_ option for me to (1) go into any site and (2) then set an option to not load the images and then (3) re - load this
-
Satellite M70: Could not find a mass storage driver
Hey there, I installed a new satellite m70. But I can't seem to find a driver for mass storage. The problem is I don't know which driver it is but my machine keeps bugging me. If anyone happens to know what device need to install please, help me. Tha
-
Restore Iphone6s +.
I just bought my new Iphone6s +. I want to restore all the information from my old iphone to my new. But iTunes show me 'the iPhone is useless because it requires a newer version of iTunes. Go to www.itunes.com to download the latest version of iTune
-
Acer Iconia A3 - A10 is not connecting to wifi from kitkat update
So, I got my acer iconia for about 5 months and have never had a problem with wifi connectivity until the update of kitkat. When I try to connect to the internet, it says the usual: connection, authentication, but it gets stuck on IP address get and
-
Select the option to leave emails on the server after they go to my blackberry
installed on blackberry email address now I need to select the option of my email client to leave emails on the server. don't know where to go in tools to access that.