ESXi 5 dvswitch and MTU settings

Similar Questions

• Trouble with my MTU settings

  I use a WRT54G for online for a xbox360 and computer connectivity. Three days ago my power went out, he came back the same day. Since then, whenever I try to play online with my Xbox 360 it says "MTU test failed" and says my MTU settings are too low.

  I tried several ways to solve this problem and none have worked up so I thought I would try here also. I'm always looking for other ways to fix it but if anyone has any useful advice, please report it.

  BTW my 360 and the computer are connected to my router, which is connected to my modem is an Arris cable modem.

  Follow this, it will surely work...

  Open an Internet Explorer browser page. In the address bar type - 192.168.1.1
  Leave the name blank user & admin password usage, it will open your router configuration page...

  Then click on the tab "Games and Applications" and click void
  tab "Port Range forwarding"
  (1) on the first line in the box, type Application in "Xbox", start box
  type in 88, in the end box, type 88, in the Protocol keep both in ip
  type in address 192.168.1.20 and give a check mark on the enable box. Click on save settings.

  (2) on the second line in the Application in "Xbox Live" box type in run box
  type in 3074, in type of box in 3074, Protocol keep both in ip
  type in address 192.168.1.20 and give a check mark on the enable box. Click on save settings.

  Once you return to the page setup, click the status tab. Take a note of DNS1 and DNS2.

  Click Setup... Change the MTU to manual and change the MTU size to 1452... Click Save

  Parameters.

  Now to assign the ip address given on your xbox
  IP address :-192.168.1.20
  :-255.255.255.0 subnet mask
  default gateway:-192.168.1.1

  To set the static IP address on the X - Box go to the network settings on the X - Box... Also assign the dns

  address on the xbox in the same way...

  Turn off your router and the X - Box... Wait a minute... Turn on the router first... Wait a

  minute... Test your X - Box... It needs to connect...

• Need help to access my MTU settings

  , I played Xbox Live for 9 months and have not had any problems with it until my Xbox 360 broke down. I had fixed it so its place and currently under way and I can't use Xbox Live more. I get a message saying my MTU is too low and I need to put at least 1364. I spent some time on this and I ask for all possible assistance. My problem is accessing the MTU settings. I use a WRT160N and I used the web address http://192.168.1.1/ However, when he talks about the box asking username and password I'm stuck. I tried everything, I left as empty user name and the password as an administrator. But it does not work. In other forums, I've seen try the username and the password under the two admin but that did not work or the other. After three attempts, it goes to a red page saying 401 Unauthorized. I disabled my firewall, reset my router and still nothing. If you have a solution to this I'd be very happy!

                                                                                                                                

  Thank you!

  For the model No, you, there is no username and password is "admin" in the lower case.

  The reason why the admin does more work as router password because you have setup a router password, not knowing, in the first time install you your router... If you remember the router password when you used all first your installation CD to install your router then enter this password else you need to reset your router and the re - configure...

  To reset the router press and hold the reset button for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  * Not all the settings above from the computer that is connected to the router.

• The VM OS installs (ESXi 3.5 and 4.1)

  I tried to create a working VM on ESXi 3.5 and 4.1 on a Dell 2850 for the last 2 days without a bit of luck.

  No matter what I do, the result is either 'operating system not found' (when you use the computer settings default virtual for CD/DVD) or the console window just sits there indefinitely with flashing underscore in the top left corner of the screen when I try to map VM CD/DVD to: welcome CD, ISO image of data storage local client CD or ISO local client image.

  I tried with Win2k3 and WinXP OS and have the same results with both.

  I made sure that the config of the BIOS was configured to boot from the CD as the 2nd option in all cases.

  I have no idea what else to try?

  I second everything people have said notably that the disc probably isn't bootable download / bad / bad ISO file.  A simple test is to simply start on a physical computer drive and see if it loads in the configuration of the installation.  You can always cancel without affecting the current installed OS after checking that it works.  Make sure that the CD/DVD is set to connect market, etc... I'm sure you already know.  These disk sizes should be around 400-600 MB in size.

  -Kyle

  «"RParker wrote: I guess I was mistaken, everything CAN be virtualized"»

• I can not find where to change the privacy and security settings.

  I looked towards the top of the article about what said you to check / uncheck the boxes, but don't tell me where these boxes are.

  Hello

  1. Open the Firefox Preferences tab as follows: click the menu button

     

     and select Preferences.

  2. In the Firefox Preferences tab, click the Security tab (for Security and password settings) or Privacy (for confidentiality, and-not-track browsing history settings)

  Thank you.

• This will remove all your custom settings and the settings of many extensions.

  Hello

  I was reading this article of knowledge and he says:
  "This will delete all your custom settings and many extensions settings."
  What are the custom settings?

  for example one of these and what else
  bookmarks?
  Add - ons?
  Top toolbar - Customize the toolbar
  Add on the toolbar
  Firefox/preferences
  Authorization Manager settings
  the new page open

  Corrupted preference file
  File preferences may be corrupt, Firefox prevents writing to it. If you delete this file, Firefox will automatically create another when it comes to.

  Here's how to delete the prefs.js file.

  This will remove all your custom settings and the settings of many extensions.
  Open your profile folder:

  In the menu bar, click the Help menu and select troubleshooting information. The troubleshooting information tab will open.

  In the section the Application databases, click view in the Finder. It will open a window with the folder of your profile.
  Note: If you are unable to open or use Firefox, follow the instructions for finding your profile without having to open Firefox.

  In the menu bar, click Firefox and select Quit Firefox

  Locate the prefs.js file (and, if applicable, the prefs.js.moztmp file).
  Delete these files and files prefs - n.js where n is a number (e.g. prefs - 2.js).
  If there is, remove the Invalidprefs.js.
  Restart Firefox. You should now have reset all preferences.

  Based on information from preferences not saved (mozillaZine KB)

  See also http://kb.mozillazine.org/Profile_folder_-_Firefox

  #1: there are too many pref for all kinds of adjustment which will offer a recipe of what you lose and how to keep certain parameters.
  It is possible to copy specific lines of a prefs.js to this file in another profile or restore some settings after deleting this file in the current profile folder.

  All the prefs that show as a user defined and appear in bold on the topic: config page are stored in the prefs.js file.
  
  This includes the changes you make and data Firefox itself and extensions store as data/parameters in a pref.
  It's

  #2,3: the localstore.rdf file stores the toolbar configuration and other data.

  #4: the current versions of Firefox shows the menu entry "Tabs" at the top menu ' display > toolbars "and" Firefox > Options ' and in the menus toolbar pop-up if the tabs are not in the default position on the top.
  
  If the notches located on the top and the menu entry is not available and you want to move the tabs under the navigation toolbar, then you have to toggle the pref browser.tabs.onTop false on the subject: config page.
  
  A restart of Firefox is necessary for updating the menu entry to display or remove.

  Note that this pref will no longer effect when the code Australis lands on the output channel (code Australis will probably land in Firefox 29).

  #5: see https://support.mozilla.org/kb/Clear+Recent+History

  Compensation of the "Site Preferences" clears all exceptions for cookies, images, pop-ups, installing the software, stored passwords in permissions.sqlite and other site specific data stored in content - prefs.sqlite (including zoom on the page).

  Deletion of cookies will delete all specified (selected) cookies, including cookies with an exception allowing you want to keep.

  #6,7: history of search bar is the story of the search bar (Google) on the Navigation toolbar.
  
  All recorded data to a form on a web page is included in the data in the form, but you can not separate and distinguish the two.
  
  Browsing history is the history of the web pages you have visited.

  • Form history control: https://addons.mozilla.org/firefox/addon/form-history-control/
  • Tahoe Data Manager: https://addons.mozilla.org/firefox/addon/data-manager/

  #8: session cookies are always kept in memory and never stored on the disc in cookies.sqlite
  
  You can only delete specific cookies manually in the Cookie Manager or leave cookies expire when you close Firefox to make them behave like session cookies.
  
  Cookies of other compensation will include all cookies and don't obey the exceptions that you have made.

  #9
  Data stored in storage DOM is not stored in cookies.sqlite, but it is generally stored in the webappsstore.sqlite file or possibly in the form of data in IndexedDB.

  • https://developer.Mozilla.org/en-us/docs/Web/Guide/API/DOM/Storage
  • https://developer.Mozilla.org/en-us/docs/IndexedDB
  • https://addons.Mozilla.org/en-us/Firefox/addon/Foundstone-HTML5-local-storage/

• Yahoo email won't load and store settings in the OS x mail application

  I tried to mail yahoo mail OSX El Capitan. Using the Yahoo tab in the box menu for the establishment of new accounts I can get the drop-down list to enter my email address that is recognized by Yahoo saying welcome + the address just entered. I press next to enter my password it is accepted. seconds after the drop falls again ask for the e-mail address and the password again. This time, I get the loading wheel which runs forever. After going to the doctor of connection I find mail forgot all my e-mail address and yahoo settings. It doesn't let me manually as some of the input fields are eliminated. My web yahoo mail warns me that my iMac has connected twice to my yahoo account. I went back into the box selection of accounts once again, before other suppliers named and pressed (other) then I found a button with a blue representative logo email that I have lived the same as before proceeder. Guess what? It loaded perfectly! The only problem is that this article only gives me the apps. Mail and Notes.Nothing else is available. If the Yahoo logo button had loaded, I would also have other Contacts apps.like & calendars + two other institutions. How can I get the missing apps to work using the mail icon settings?

  Is this your first attempt using Yahoo! mail on Mac? I had some weird problems with my own Yahoo! account today, and I know that sometimes he just goes a bit wonky and correct itself on its own. Unfortunately, it's a big part of the reason I do not use my Yahoo! account more.

  Have you tried to manually configure the account as an IMAP account? Y at - it none of the settings of your Yahoo! account to restrict connections and others? You have two-step verification enabled for your account?

• Equium L20-198: error 0271 check date and time settings.

  My apologies if this appears twice, I tried to change and I somehow lost my thread.

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  > Is it possible that the CMOS battery charge the main battery and this is my problem?
  Well, the CMOS battery can be charged with AC adapter but the laptop must be turned on for about 18 to 20 hours.
  It s not I known if battery CMOS takes the power of the main battery
  Usually the CMOS battery should always charge in work and when the laptop is plugged in
  So, theoretically the main battery has no influence on the CMOS battery.

  I think it might be a mobo problem, I think this could be a reason for it

  By the way; in most cases the CMOS battery is not removable... so I wonder how did you repalce this CMOS battery...

• L20-198 error 0271 check date and time settings

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  Post edited by: d14ner

  Hi people.

  For awhile, I had problems with my laptop. Toshiba Equium L20-198.

  If I unplug the network at any time, when I re - connect and start the computer, I get two warnings.

  Date and time settings error 0271 check.

  WARNING 0251 system cmos checksum bad default configuration used

  About 6 months ago we replaced the CMOS battery, while we struggled to find a brand new ML1220EI2 Nickel hydrogen 3V 14mAh, we had to go for a "used" quality one.

  The problem persists and I now also get this message every time that I reboot rather put into hibernation.

  Yes, the computer is a little more than 5 years and hit a little, but it is absolutely perfect in all other ways - with one exception - the main battery is completely dead. If the network becomes disconnected, I make you stop in about 3 minutes. :(

  Is it possible that the CMOS battery charge the main battery and this is my problem? I did a little research on Google and found a similar question and an answer on a Dell forum where someone has stated that the CMOS takes his food on the main battery. Would this be the case with my Equium and could buy a new battery solve my problem? I obvioiusly don't want to spend £30 + for it will not help, any response would be appreciated.

  Thank you.

  Post edited by: d14ner

• Toshiba 40TL938G - find the date and time settings

  I have a 40TL938G and I can't find the date and time settings.
  Can someone help me?

  SSY
  I read the manual and it does ' t say anything about these settings.

  THX

  In the settings of digital television, you should see the option called local time settings

  To display the time on the TV you press the sign of the small clock on the remote control while watching a normal TV show (analog only)

• Ethernet and Ethernet settings under network settings?

  Noticed that Gray was Ethernet and Ethernet settings under network settings and wireless.

  I was wondering not if that was supposed to be used for something else.

  It is used if you are using a lapdock or dock HD that you can connect a USB Dongle for ethernet and option.

  Mark

  Support Forums Manager

• File ran and transfer settings Wizard Installation all users in Administrator account info

  I did a Windows XP Pro 32-bit clean install on a laptop.  After I installed all the software and drivers on the machine, I ran the file and Assistant to bring users account on the machine to transfer the parameters.  The problem is that I stumbled accidentally while still connected as long as administrator, all the information of users installing to the default Administrator account.  Y at - it an easy way to remove the users from the administrator account info, or to delete the administrator account take it back to the installed version of basic?  Thanks in advance for your help.

  Original title: using files and Settings Transfer Wizard. Oops

  Hello

  I suspect that Naman R misinterpreted your post. My interpretation is that you have used the Wizard Windows XP file / transfer settings, no Windows Easy Transfer.

  Assuming you still have available transfer fluid, which is a kind of external drive (USB, probably), there is no reason why you should transfer the settings again, but in the correct user profile.

  With respect to the transfer in the account manager, all the parameters of implementation of changes should be reversible system restore (start - all programs-Accessories-System Tools System Restore). Data can only be deleted while signed in as an administrator. Do the system restore before doing the right files and transfer settings, otherwise it will also cancel these changes in settings that have been applied to the appropriate user profiles.

  Tricky

• Record header and footer settings

  Can someone tell me please how to set the parameters of the header and footer and save these settings for printing so that I don't have to enter the settings area and make sure that my printer is always selected to 'print borders', which is what seems to make the header and footer still print on my page.

  Also, how utiilize the setting "custom" under headers and footers.  I want to divide the date and time on the page and I don't know if I can do it.  That's where I'm wondering if the 'custom' area comes into play.

  I have e-all-in-one-HP Officejet Pro 8600 printing.

  Thanks for any help!

  From what it seems that you have created multiple threads on the same subject. While this may get you an answer in a faster way, it deprives the other users to communicate with us. If in the future, you would create a single thread by number, it will be greatly appreciated.

  As I explained in this post: http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/How-to-set-the-Header-and-Footer-Settings/m-p/2366241

  These parameters are not defined by software or the printer drivers and belong instead of the program that you use (in the case of the thread as I responded to Firefox).

  I hope that you have the information you were looking for and have a nice day!

  

• My date and time settings are set in Egypt and whenever updates of the laptop with microsoft server time, it increases of 1 h.

  My date and time settings are set in Egypt and whenever updates of the laptop with microsoft server time, it increases of 1 h.
  Recently in Egypt, changes of daylight has been cancelled and I guess that's the cause of the problem!
  Any ideas?

  If time was recently cancelled, you can go to your control panel:
  Panel-> data and time-zone (tab) >
  and uncheck the "automatically adjust clock for daylight saving time.

  Otherwise, you probably need to adjust your zone settings on your computer using Microsoft time zone Editor.

  TZEdit: <> http://download.microsoft.com/download/5/8/a/58a208b7-7dc7-4bc7-8357-28e29cdac52f/tzedit.exe >

  HTH,
  JW

• My computer won't recognize bluetooth headset! Error message 'Discoverablilty and connectivity settings were not saved' and 'Bluetooth Exchange folder is not found' by changing the properties of bluetooth

  Original title: my computer won't recognize bluetooth headset!

  When I checked "Allow bluetooth devices to find this computer" under the "Option" menu, I got the error message "Discoverablilty and connectivity settings were not saved. Another message error I got is "Bluetooth Exchange folder is not found".  Although I copied this file from my backup data files, the problem still exists.

  I used to use able to connect to my computer with the headset.

  Please advise me what I have to do.

  Hi Venturer016,

  Remember to make changes to the computer before this problem?

   

  Method 1: You can follow the steps mentioned in the link below

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.