ESXI and Asus P5E WS Pro and hyperthreading. How?

Similar Questions

• How to activate hardware acceleration and hyperthreading showed unknown?

  Hello

  I have install ESXi 4.1 on an IBM x3250M3. just wonder how to activate the acceleration hardware and hyperthreading showed unknown?

  Thank you and best regards,

  Kelvin

  It depends on the type of processor.

  The last CPU, there is no downside and a small performance improvement.

  Note that HT not fooled the number or carrots, but increse the number of logical cores...

  André

• I've lost the last two digits of my valid key for xp pro sp2 and notebook, how do I get the key and support? where?

  I've lost the last two digits of my valid key for xp pro sp2 and notebook, how do I get the key and support? where?

  Hi Jonathan,.

  Please go to the Microsoft Community Forums.
  After the description of the question, I understand that you have lost the last 2 digits of the product key.
  Let me go ahead and help you with the issue.
   
  Please answer these questions, which will help us to help you best.
  1. How did you get the product key?
  2. the operating system come preinstalled on the computer?
   
  I suggest you for the link and check if that helps:
  How to identify, locate, and replace a product key
  http://support.Microsoft.com/kb/811224
   
  See also:
  http://support.Microsoft.com/kb/295539
  
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• you want to have my pc to be a configuration to boot Daul with Windows XP PRO sp3 and WIN7 how?

  Daul Boot Windows XP PRO sp3 and WIN7

  I want to have my pc to be a configuration to boot Daul with Windows XP PRO sp3 and WIN7 how?

  Hello

  Access the link that has a video on how to set up a configuration to dual-boot between Windows XP and Windows 7: http://www.microsoft.com/showcase/en/us/details/ae3108ed-a8a1-4ba3-8698-01b8cedd2cf4

  Here's a few that has information on multiboot: can I have multiple operating systems on my computer (multiboot)? : http://windows.microsoft.com/en-US/windows7/Can-I-have-more-than-one-operating-system-on-my-computer-multiboot

  Install multiple operating systems (multiboot): http://windows.microsoft.com/en-US/windows7/Install-more-than-one-operating-system-multiboot

• I tried to update the drivers that I used my motherboard Asus drive and some how it changes some firmware on the operating system

  OK, my problem is that I don't have a PC before generation. It is a custom build. A week ago while I was trying to update the drivers, I used my motherboard Asus drive and some how it changes some firmware on the operating system. now that is fixed. and now, just yesterday I downloaded the Windows Essentrils to win mail. This morning I woke up and started my PC and I get a red screen saying that some unauthorized to the firmware change has been done to solve this problem, I think I have to erase my hard drive and re to stall my win 7. and how do I do with the disc because it is a refurbished lic. Windows Essentials

  Yes

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• Want to take the certification VCP6-VTC, but I finished the 5.5 ESXi and vCenter Server 5.5

  Hello

  2 years ago I had the training for 5.5 ESXi and vCenter Server 5.5 - I wonder if that would satisfy the requirement and allows me to pass the exam VCP6-VTC?  Or should I stick with the VTC VCDP5 only?

  Have you taken after school.

  5.5 vSphere install, configure and manage.

  If so, please attend vSphere: what's new [5.5 to 6.0]

  It is a 2 day course that will allow you to take the exam VCP6-VTC.

  Otherwise, take VCP550 review and upgrade to VCP6-VTC in taking 2V0 - 621D.

  Pleaes see following URLs too.

  http://myLearn.VMware.com/mgrReg/plan.cfm?plan=12457&UI=www_cert&TRK=profile_certification_title

  VCP6-VTC Certification

• vCloud Director: using different groups of ESXi and vCenters

  Apologies for a question very newb-ish, but my knowledge of the vCD is very limited.

  VCD of can control and manage the following:

  1. multiple ESXi clusters under the vCenter even?

  vCD-> ESXi group has and ESXi cluster B

  2. several server vCenter, with their own groups of ESXi.

  vCD-> A vCenter and vCenter B.  vCenter cluster Cluster A1 ESXi and ESXi A2 A-> .  vCenter B-> Cluster B1 ESXi and ESXi cluster B2.

  I hope that all the senses.  I'll be happy to extrapolate more.

  Hello

  Please find the answers

  1. multiple ESXi clusters under the vCenter even?

  vCD-> ESXi group has and ESXi cluster B

  Yes, VCD support certainly take the resources of multiple clusters. To be more specific model allocation is deciding factor we can extend on cluster or not.

  2. several server vCenter, with their own groups of ESXi.

  vCD-> A vCenter and vCenter B.  vCenter-> Cluster A1 ESXi and ESXi cluster A2.  vCenter B-> Cluster B1 ESXi and ESXi cluster B2.

  Yes, we can certainly have several VC related to VCD. To max, it supports 25 VC.

• I have already subscribed to CC of photoshop and lightroom, how do I add first pro my monthly plan?

  I have already subscribed to CC of photoshop and lightroom, how do I add first pro my monthly plan?

  Subscribe to the only application to Premiere Pro for 20 $par month.

  You will have then two plans are billed separately.

• The traffic between a host ESXi and vCenter Server is secure?

  Dear team,

  You pray let me know is traffic between a host ESXi and vCenter server (vice versa) is secure?

  The VC and ESXi version is 5.1U1a

  concerning

  Mr. VMware

  Default SSL certificates are installed automatically. However, you can configure the third-party SSL certificates to make the environment more secure.

  Please see:

  VSphere Documentation Centre

  http://pubs.VMware.com/vSphere-51/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-51-Security-Guide.PDF

• I had Mac Adobe Acrobat Pro (October 12, 2013) I tried the new domain controller and now my Adobe Acrobat Pro is gone how can I go back? I don't like DC

  I had Mac Adobe Acrobat Pro (October 12, 2013) I tried the new domain controller and now my Adobe Acrobat Pro is gone how can I go back? I don't like DC

  Hey leonardg88213387,

  Please post on the Adobe forums.

  Could if it you please let me know what exact version of Acrobat you are using.

  If you were using XI of Acrobat, you can check the doc KB below link:

  Adobe Acrobat DC uninstalled Acrobat XI | How to get Acrobat XI

  OR, if there is another version, then uninstall the DC version and install the version you want from here:

  Other downloads

  Hope that helps.

  Kind regards

  Ana Maria

• ESXi and local RAID 1 - do not know if it works

  I have setup a RAID 1 (2 discs) on my box of ESXi. Now I loaded ESXi and registered in with the vSphere client. In "The memory", is to show both of these drives. Should it only showing a?

  

  I thought that ESXi should see 'one' in the car for me to put on.and data warehouses, then the RAID controller would just reflect. But when I try to create a data store, it allows me to opt for the second time either of these discs on first, then the other drive. Is this job right? This doesn't seem to be just if I can just add warehouses of data on each disk individually.

  which means that you are not using the controller RAID HRDWARE and using your software RAID. in esxi software RAID is not supported

• a few questions about ESXi and SAN CF with HP P2000 G3

  Hello everyone!

  I am new to ESXi and SAN, then I need help for her.

  I have Encolosure C7000 system with 4 blades BL460c already installed ESXi 5.1U1 (HP custome ISO image). Everything works fine now, but I do not understand something:

  -What is the management network which I use vSphare Client to connect to? It is a private network to manage ESXi servers what difference with VMnetwork used by Virtual Machines? Because I've set up an IP address for this connection manually, but it is of course separate with IP addresses, I used on Virtual Machines.

  -If my system has problem, so I have to reinstall ESXi, license keys can be used again? Already, I have 8 license key for 4 blades (2 CPUs per server), but they have not yet used. Because I am new to ESXi, cause I had to reinstall ESXi several times to understand.

  -When I install successful ESXi, I don't know how to start working with SAN. What should I configure P2000 before it be plugged into the SAN switch? Or I can plug it then config later? Because I don't see it on the ESXi server. And on the OS I installed on the Guest Virtual Machines, I see nothing new in Device Manager. I thought that this guest operating system will detect the mezzanine card. But I see only mezzanine card that connect to the P2000 by SAN switch in ESXi (see image here http://img203.imageshack.us/img203/684/dsc04088k.jpg ). To my knowledge, I think that ESXi server have to detect the P2000 as hardware device. Can someone teach me step by step install and configure a San on ESXi? Or show me a tutorial because I searched but only iSCSI results.

  My devices:

  01 7.1 HP BLc7000 CTO 3 IN LCD ROHS Encl.

  04 BL460c G8 servers HP FlexFabric 8.5 10 Gb 2 p 554FLB FIO blade adapter

  02 7.3 HP B-series 8/12 c BladeSystem SAN Switch

  01 HP P2000 G3 MSA FC Dual Controller

  Thanks for any help, sugession or comment!

  -What is the management network which I use vSphare Client to connect to? It is a private network to manage ESXi servers what difference with VMnetwork used by Virtual Machines? Because I've set up an IP address for this connection manually, but it is of course separate with IP addresses, I used on Virtual Machines.

  Yes, it's a separate network used only for traffic management between ESXi hosts and vCenter - it is also the network used to connect to the environment - that's different, then the network used by your virtual machines

  -If my system has problem, so I have to reinstall ESXi, license keys can be used again? Already, I have 8 license key for 4 blades (2 CPUs per server), but they have not yet used. Because I am new to ESXi, cause I had to reinstall ESXi several times to understand.

  Yes the license keys can be reused, and if you use vCenter licenses will be managed by vCenter

  -When I install successful ESXi, I don't know how to start working with SAN. What should I configure P2000 before it be plugged into the SAN switch? Or I can plug it then config later? Because I don't see it on the ESXi server. And on the OS I installed on the Guest Virtual Machines, I see nothing new in Device Manager. I thought that this guest operating system will detect the mezzanine card. But I see only mezzanine card that connect to the P2000 by SAN switch in ESXi (see image here http://img203.imageshack.us/img203/684/dsc04088k.jpg ). To my knowledge, I think that ESXi server have to detect the P2000 as hardware device. Can someone teach me step by step install and configure a San on ESXi? Or show me a tutorial because I searched but only iSCSI results.

  Yes, you will be able to configure the San later - by default, the virtual machine will not see the SAn, as it is virtualized by your ESXi host - all the VM will see is a virtual SCSi disk - this doc's guide to vmware for storage - http://pubs.vmware.com/vsphere-51/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-511-storage-guide.pdf - you can visit the website of HP they might have documentation on configuring P2000 for vSphere -.

• Just bought a new MacBook pro to replace my old PC.  I have 4 LR on disk and LR 5 upgrade disk and need to know how to load LR on my new Macbook Pro.  Also how can I transfer photos?

  I'm not very good with computers and need help.  My 4 LR and LR 5 upgrade are on the disc, but do not use my new MacBook Pro drive.  How can I load LR on my new computer?  Also, how to make photos of LR on my old computer to the new computer?

  You can download Lightroom via the link below.  If you just want to install the upgrade version 5 that you don't need to install first - 4 you probably just provide the serial number for this, when you activate 5.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  With regard to transfer photos goes, which is something you could get help in the forum of Photoshop Lightroom .  But you could wait here and see if anyone knows, or you could search Google and probably know how.

• Differences Betweem ESXi and ESX

  Hai,

  I want to know the differences between ESX and ESX? where can get. If they are distinguished by the features that are available are not available.

  Thank you.

  Most of the features are available in available in ESX ESXi. In order to get the full functionality of ESXi, the host must be managed by vCenter Server.

  ESX has a console that is drastically reduced in ESXi. It is actually easier to install and easier to manage ESXi.

  See;

  http://www.VMware.com/products/vSphere/ESXi-and-ESX/index.html

  and

  http://www.VMware.com/products/vSphere/ESXi-and-ESX/compare.html

  Kind regards

  Paul

• Differences between ESXi and Vsphere hipervisor

  Hi guys,.

  I need to understand the difference between ESXI and Vsphere hipervisor.

  Is it correct to say that Vsphere ESX?

  Help will be very useful.

  Thank you very much

  vSphere is the range of products, including (hypervisor) ESX, vCenter (management) etc.

  In comparison, you asked "Is this correct to say that a shoe laces"?  No, not really.  One is a part of the whole.