ESXi crash happening with vCSA?
Hello
I have 4 ESXi 6 hosts in a HA cluster.
What will happen if the ESXi host falls down and vCSA was running on this host?
The vCSA always automatically starts on a different host? (I think: this must be a vCSA action, but when it is low nothing will happen.)
Is there a way to avoid this? I know I can build 2 vCS of Windows in a cluster, but I really don't want that.
Kind regards
S
vSphere HA is not to have a dependency on the server vCenter after successful configuration.
so if your ESXi Host which hosts vCenter VM fails, HA will still be able to detect this failure and launch the failover, so in a few minutes, you will find your device being powered in a healthy host in your cluster HA of vCenter.
Tags: VMware
Similar Questions
-
Update / fixes ESXi single host with VCSA running on it.
We have just updated since the free version of ESXi 5 by ordering the Kit of Essentials. In the process, of course, we were able to deploy vCenter Update Manager (which has been the main motivation, like patching manually the free version seemed to be quite a pain). We have a Windows host that has installed the Update Manager, and we have a VCSA running on the single instance of ESXi, we deployed to date. We were able to install the plugin on the viClient and scan the ESXi host for patches with success (a need a good number). But, we're stuck trying to install the patches... us when trying to restore the host, we get: "the operation is not supported on the selected inventory items. Check events for the objects selected for the operation.
The host says:
The 10.0.1.80 host has a virtual VMware vCenter machine
Device server with VMware vSphere update
Manager or VMware vCenter Server installed. The
Virtual MACHINE needs to be moved to another host for the
consolidation to proceed.
error
28/08/2014-16:21:32
Clean up the entity
10.0.1.80
root
Looking at this logic, for the host switch to maintenance mode, the VCSA should have been suspended (apparently, actually moved), which would avoid in turn patches / updates to the deployment. Am I correct in thinking, that we have a second host and networked storage? Made a Kit Essentials / license provide for the possibility of vMotion from one host to another? It wasn't really clear... Yes, the web site says "vMotion" is included in most Essentials, but find it me hard to imagine any point to a facility in ESXi stream without the ability to vMotion between one system and another guest...
Welcome to the community,
And since you have only an ESXi host and your vCSA is running on this host, you cannot patch this host with Update Manager for reason that already know you: the host should be the maintenance mode.
Add about another host, with Kit Essentials without vMotion functionality, you can try using a data store of shared storage between two hosts, stop the vCSA on first host and switch the vCSA on the second host... and finally the first host patch.
-
What happens with ESXi vMA logs is not available?
I'm under vMA 4.1 and it set up as a server syslog for my ESXi 4.1 hosts.
Anyone know what is happening with ESXi logs when the vMA is not available? For example during a restart of the vMA.
Hello.
Newspapers would continue to be logged locally, while the VMAs was not available. Make sure that you also set up the Syslog.Local.DatastorePath, so that you don't lose anything. See KB 1033696 for more information.
Good luck!
-
What happens with EXE2 if EXE1 breaks down?
Hello community,
Yes, it's a way to generic object. I'm running both EXEs both compiled LabVIEW. I wonder what is happening with EXE - 2 If the EXE-1 crashes. It will continue to run or is it crashes as well. The crash of EXE1 does not cause a whole OS crash, it shows just the crash dialog box.
I can speculate so please only answer if you know the answer for sure.
Thank you!
Each executable is running in its own instance of the application - if one of them crashing will not cause the other crash * except * it is based on a shared resource or a shared component of NOR - for example if your program crashes because they use shared variables and blocks shared variable engine, then you will have problems.
We often run two or three applications in tandem - the only time that we had a problem was when there was a problem with .NET that has caused so much crash.
-
Something really weaird happened with Multisim 11. Help, please!
Hi all
My Multisim suddenly crashed and he has since lost most of the menu items. I can't even place the component! I reinstalled the app, but the same behavior continues. Is someone can you please tell me what is happening with this? I enclose the screenshot of the toolbar.
Thank you.
Kind regards
Viktar Tatsiankou
Hello Viktar,
It seems that your user configuration file could be corrupted. Take a next look in the knowledge base:
How can I reset the Multisim or Ultiboard to its default Configuration User Interface?
Let us know how it works.
Kind regards
-
ESXi host running 6 VCSA disconnected from the vCenter
Hi guys,.
I have a weird problem with my vCenter build 6. Single cluster of ESXi hosts. Running VCSA 6.0 and 6.0 ESXI. Making a storage of the vCenter vMotion initially got stuck at 77% and the ESXi host running the disconnected from vCenter vCenter. But I can connect directly to the ESXi host with vsphere client and see the vCenter VM works perfectly well. If I try to manually connect host ESXi and vCenter, I get the error "Failed to contact the host specified") both are in the same subnet and VLAN. I can migrate to other virtual machines without problem. I even restarted the host and yet I am not able to connect to vCenter. The host connects to vCenter if I reboot vCenter, but after a few minutes, disconnects again (even if no task does run on this topic.) I have no HA or DRS enabled at this point that I build this new environment and only presented a single LUN as a store of test data to the cluster.
Any ideas?
OK, I think I fixed that or have at least a work around. So the underlying question was hiding ID mode/CPU EVC. I'm under the cluster to a level of EVC to reduce until I have migrate workloads from old environment and I think that this created a problem for the unit vCenter. To resolve this problem, I turned off the unit, directly connected to the ESXi host that had the camera running, edited the virtual machine and reset the masking of CPUID. Also, I've hidden the flag NX/XD of the guest. It's temporary (I hope) as once I increase the EVC to the Haswell, I will expose the NX/XD comments and test. For the moment, it is of the workaround I did. It may be of some use to someone.
-
I'm about to integrate the vCenter Server Appliance in our environment, but I have more questions before taking the plunge.
(I'm doing a clean install of 5.5 - not an upgrade of 4.1 vSphere - which is our present environment)
I keep reading that VUM does not work with VCSA. But you can create a virtual Windows machine and install VUM, then install a plugin (?) to integrate in VCSA. How does this work exactly? I do a clean install of ESXi 5.5 on 3 new hosts. I have install the vCenter device as a virtual machine. I also intend on creating a virtual machine to act as the vSphere Update Manager. Can I use this simple VM (like the VUM) and use it to upgrade all ESXi hosts? Or I have to build 3 VUMs for updating each host? All this documentation of vSphere made my blurred eyes!
HI sarkmo
Find the answer below.
Can I use this simple VM (like the VUM) and use it to upgrade all ESXi hosts?
YEARS > Yes, VUM one server alone is sufficient to manage the updates/upgrades on everything within a vcenter Server esxi host. . So don't worry about it.
I have to build 3 VUMs for updating each host?
YEARS > no need to build 3 vms for your host 3.
Thank you.
-
We had a situation where our ESXi Server 3.5 running on a Dell 2950 with 2 guest operating system crashed on us all night. The box still had the power, but was insensitive to the pings in network and the guest OSes were completely down.
We had someone in the office who had to pull the power cables and reconnect it until the server would start up again.
We wanted to look for the reason of the accident, but newspapers in var/logs/vmwmare/only note the entries from the current boot. There is no historical. Is this a normal behavior? Y at - it an option to keep the entries of the history on the host? Is syslog the only option for historical
Also, someone got experience with ESXi crashing this way Dell hardware?
Hello
The reason for the crash may differ from a sort facility even if someone may have the crash this material may not be able to solve this problem. However, get recycled log files after reboot is normal. If it was an accident then you can get a core dump server.
Will core dump gets essentially stored in the partition of vmcore, after the reboot, that it must be mapped to one of the partitions.
Thank you
kooltechies
-
Since I upgraded to El Capitan, when I launch Safari, my fan is running hot, CPU goes into battery and use 100% drops quickly. This does NOT happen with Firefox.
Force Quit Safari and then restart Safari while holding down the SHIFT key. This will launch Safari without plugins or extensions. If works in Safari you have to remove all extensions you have installed and reinstall better one at a time until you find the offending Safari extension.
-
Sequence of operations leading to the problem:
!) Existing bookmark to go to the requested web page.
(2) later, the I delete manually the reference panel historical at this bookmark - command 'delete '.
Search 3) via the bookmark panel list some time later, I noticed that the bookmark I would have used previously was deleted. I did not went to the Bookmarks panel and deleted explicitly point. The deletion is certainly due to him removing point of reference in the history panel.This behavior started recently - and I think with FF for Android exit 31 or 32. Certainly is not happened with versions before clearing the historic bar on historic Panel were introduced. I am now on version 32.0.3
Question being entered on desktop machine so 'guessed' version info irrelevant, so I've manually entered version info, etc. below...
Thank you, Rob.
HI dislexic_wobmat,
It seems that this problem is fixed in the next version of Firefox beta.
-
I am reminded constantly upgraded to the new version of Firefox. I did and since that time, all that I go on a link in my email, in a store, or shopping, I am bombarded with the Constsurf and other ads. I tried to block everything I could think of, nothing helps. It didn't happen with older versions.
It could be the work of one of your modules, or even add / bad-ware.
Look through your list of modules and make sure you know what each of them is
and so. In addition, to check the programs that are on your computer
Windows > start > Control Panel > uninstall programs.
(Mac: open the "Applications" folder)
Go through the list and a web search to check that you have not
know what they are.The problems of Firefox caused by malicious software {web link}
-
When using YouTube, I get foreign on-screen words. This does not happen with Safari.
Clear the cache and cookies only from Web sites that are causing problems.
"Clear the Cache":
- Firefox > Preferences > advanced > network > content caching Web: 'clear now '.
'Delete Cookies' sites causing problems:
- Firefox > Preferences > privacy > Cookies: "show the Cookies".
You can write a check for corrupted fonts and duplicate and other police issues:
- http://www.thexlab.com/faqs/multipleappsquit.html - help book 2.0 fonts: looking for damaged fonts
- http://www.CreativeTechs.com/IQ/garbled_fonts_troubleshooting_guide.html
-
I use view all bookmarks to set up a menu. This page is now tagged library.
When I click on something it often becomes hidden behind the library, rather than to the front where it is supposed to be. It started to happen with the latest update of Firefox.Can it be fixed?
Sometimes, I noticed when I open a link in Firefox that the window that I expect to appear and stay out in front did not stay in front. I have not been able to identify a model, and just try once your script, it's not happened to me.
If you have a widescreen monitor, another option for the use of bookmarks, in addition to the Library/Organizer and the dropdown menu, is to use the sidebar (press Ctrl + b to open and close).
-
Just download Firefox VER 9, now I'm unable to save passwords, this never happened with an another Version of Firefox. I have tried everything I know to solve this problem, I ticked the boxes in the options, where it says to save passwords, don't know what else to do, may be using Solution Explorer.
Thank you bob.Do you hear the names and passwords in the password manager or do you mean that you are connected is no longer on to (remember to) Web sites after the closing and restarting Firefox?
There is a difference between remembering the name and the password in the password manager and a check box "remember me" on a web page.
The latter usually involves the creation of a special "remember me" cookie that is stored on your computer and which is sent to the server.
If that "remember me" cookie is deleted or is corrupted or is not send to the server, then the server remember that you and you must connect once again.Make sure that you are not Firefox running in permanent private browsing mode.
To view the history settings and cookies, choose:
- Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
- Uncheck the box: [] "always use the navigation mode private.
-
Let's say I go to the homepage of Yahoo!. The bar is located on the top. When I use my mouse to click inside to let know that I want to type something, nothing happens. It does not seem to register that there is a part on the accessible page. This only happens with firefox and only on the first 2 inches on the web page. It also happens on any web page. I have all my updates and I also uninstalled and reinstalled. Don't know what else to do. No one I know seems to have an idea what is happening. I had a break for about a month, and then she came back.
Baffled
The extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Maybe you are looking for
-
AirPort Extreme: extend only 5 GHz network
I have a Time Capsule 802.11n (4th generation) set up to expand my WiFi network at our show in the stairs. The WiFi hotspot, upstairs in my office, is an Airport Extreme 802.11n (5th generation). Attached to my TV Sony is a transmitter Brightech Doub
-
How can you (View Source on the Page) view the source on a certain Web page?
"I wonder how to start a ' view Page Source ' window (accessible by right-clicking on a page and pressing the Page view Source) I can get to a certain page (one) source. If I can't, it's a suggestion.
-
Help to "problem"-WRT54G, Linux, Unix and Windows ".
I have a Linksys WRT54G rev 6, firmware version v8.00.7 011, July 27, 2009. My ADSL modem is a modem DSL from Westell G90-610014-20 revD. My home network is 'predominantly' Windows wireless clients and a wireless printer, who don't have no problems
-
I'd been a change and then accidentally hit accept 'because' I would like to delete this word
-
When is it a law to stop my printer Canon of priting, microsoft has you have been in my printer my computer was working fine I know April 13, 2010 my player medial he let not play if she not microsoft? can you please unlock my printer code is in the