ESXi does not, what to do?

Similar Questions

• When I click on the menu option 'Open Site' he does not what to expect, is rather shows the desktop on my iMac.

  When I click on the menu option 'Open Site' he does not what to expect, is rather shows the desktop on my iMac.

  What you see is exactly the way it should work. Open the site your Finder window opens, so you can access the .muse file you want to open. Recently opened (just below it) will show the list of sites you have worked on lately. I don't know what else await you.

  I should probably see a list of site temp I want to open or DELETE?

  No, Muse or any other program besides will not open a file that you do not select to open. To remove a site simply open Finder on Mac go to the location of the file and delete it in one of the many ways that a Mac allows you to do.

• In Esxi ESXi: MKS to VM on virtualized ESXI does not work

  Hello

  I hope someone could help me with the question below.

  I am unable to open the connection of MKS of VM - 10 to VM(Gold-VM) located on the nested ESXi (Esxi55-5) host. Webpage keeps loading MKS for gold - VM, but it does not display anything.

  DNSServer, VM-10, VCSA, ESXi55-5 are connected to the same SSswitch - VM Port Group(Promiscuous Mode), subnet

  Gold - VM... Virtual computer located on nested ESXi host

  VM-10... Computer virtual located on the physical host of ESXi, where I am trying to open the connection of MKS to gold - VM

  VCSA... vcenter server located on physical host IP ESXi (192.168.1.3)

  ESXi55-5... Virtualized Esxi host connected to the server vcenter VCSA

  DNSserver... facilitating the DNS service

  Newspapers from virtualized host Esxi55-5:

  

  VM - 10 newspapers:

  

  with MKS Web page:

  

  I just found out what was the reason that connection MKS display a blank page in the browser Web IE11.

  The solution was very simple: add local.domain to the Compatibility Mode in browser IE11.

• 1st install ESXi does not connect to the network

  I used VMware Fusion and several versions of the workstation. I am a computer SCIENCE student and I'm trying to set up a virtual server for the purpose of learning environment.

  First, I installed ESXi in workstation computer on my laptop. I scare IT LIKED. I ran to the store bought a fresh HDD to install ESXi to my old server Supermicro (MBD-PDSMA + o LGA). During installation, I received a warning that the Intel Virtualization has been disabled on my motherboard. I activated that can restart the installation. No matter what I try I can not this 'thing' to get an address from my DHCP server. I even tried unpluging my router and using several computers on my network as DHCP servers. Each of them I tried my entire network has received fresh IP address but my supermicro box did not. I tried to use two network, port 0 only ports and only 1 port. After having lost about 24 hours I tried to install 5.0.0 and it worked without problem. I would like to be able to update the latest versions unmolested my network connection is going to die on me when I do.

  Ideas?

  My next issue will be storage because not even my JABOD drives appear in my passthrough RocketRaid 2220 and PCI does not seem to be an option for this card. Yep, that's good baby PCI - X... Say what you want about RocketRaid, this card was sitting at the bottom of a box of son with no static case a few years to 3-4 moves and it still works like a champ.

  I had the same problem with a card mother similar supermicro who has the same Intel Lan Adapter as yours.  Using the e1000 drivers of 5.0 worked for me.  I followed the instructions in this thread:

  http://communities.VMware.com/message/2115391#2115391

• ESXi does not recognize the cd/dvd on HP DL380

  I'm new to the hypervisor and really need some advice on a DL 380 I put up as a box QA. After installing ESXi 3.5, I created the virtual machine I need and proceeds to start a virtual machine, but was surprised to see that the server does not see the CD drive? I guess that would not as surprising, if it's a customized version white box, but a HP DL380, only one of the most common servers in the world?

  Anyone has any advice or suggestions about what is a hotfix for this.

  Thank you

  Robert

  In addition, once you can convert many of your applications and or OS installs in ISO format, you can just use your Infrastructure Manager client and connect an ISO to some VM you must have a 'CDROM' inserted in to.

  For example, if you install Citrix and you have an ISO copy locally or on your network, you can simply start the virtual machine and then click 'connect/disconnect devices on CD' point to your ISO image. VMWare then moved the 'CD' for the virtual machine and it will be accessible as would a normal CDROM.

  When you do that, your local CDROM in the ESX box really is not used for a lot more outside upgrades to ESX 3.5, and even what is done remotely today for ESX 4.

  Hope this helps

• my ipod 5 does not light, I am of the view the home and power button down for 10 to 30 seconds, but my home button is stuck or at least does not, what should I do?

  so I have my button home broken for some time, not only does not respond as broken in the iPod so I couldn't press it or anything. It is only today that my iPod will not turn back. I normally would just hold the home button and the power button for some and things would turn out right away but now I can't use my home button so I'm stuck without options. I left that he plugged for a while but still nothing. I tried to clean the home button. So what should I? get a new home button or just get an upgrade anyway.

  You could bring to the Apple store and let them to evaluate it. If an upgrade is financially feasible, I would recommend that you're not just fixing the home button will help. Also note that if you do any repairs on the iPod it will void your warranty (if you have one.)

• Windows Firewall does not, what to do

  I install windows xp pro - and the firewall does not open. What can I do?

  Hello

  • What happen when you try to turn on the firewall?
  • You receive an error message?

  You can view these methods:

  Method 1:

  You can try to reset the winsock.
   
  To repair and reset the winsock in Windows XP. 
  1. click on the Start button.
  2. type Cmd in the search text box.
  3. right click on cmd.exe and command prompt run as administrator. Allow elevation request.
  4 type netsh winsock reset at the shell command prompt, and then press the Enter key.
  Restart the computer.

  Method 2:
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
   

• The removal of information tool does not what its supposed to

  Original title: delete questions

  I have a laptop vaio Sony and for some reason the deletion tool information is not what its supposed to. the Delete on close windo option does not work either. I have to manually delete each element of the story. Whats up with that?

  If my method does nothing for you, and it looks that we are talking about Internet Explorer, please repost to section Internet Explorer:
  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Fees VCSA 6.0.0 deployment to 6u1 Esxi does not work

  I have a brand new facility to 6u1 and I deployed "VMware-VIMSetup-all - 6.0.0 - 3040890" above it. It works as expected with Vsphere client, but what ever I got tired, I was never able to connect to the web client of vsphere.

  (1) I tried with Ie, chrome, mozilla

  (2) services Integretion is installed from the iso package above

  (3) different computers are judged

  login screen comes, valid information are accepted, approval of Integration services execution is displayed and a flash vmware endless animation begins.

  It's the end of the story. I have a lot of research but found no of anyboby complaining about this problem.

  Any ideas appreciated. (Even the wildest)

  Sinecerely,

  Grosbois

  Hello Mordi,

  Thanks for the suggestion, but it didn't work in my case. In the same environment, I have 3 different Vcenter unit deployments. None of them worked. For overcome I planned to change Appliance Linux on Windows platform. But something struck me at that time. I was using '_' in the name of devices which is known to cause problems.

  Then I deploy the same device without '_' in the name, and it worked.

  So in my opinion the virtual Appliance Center does not work if there is a "_" character in the FULL domain name

  Sincerely,

  Gökhan Alganatay

• Scrolling on Preview animation does not what its supposed to then sets the design document, also going to the mess of the page master all the link and all the objects in the subpages and sends the data more irrelevant site

  When I use scroll animated: Walker I saw in the browser, it does not work in the x / y position cordinated in design mode. then when I go back to the design mode the object moved permenantly. Also when I extend the master page, then go to edit page with the master page applied to all objects and links are deformed and moved to the top of the page. Why? and also I have some links in the text and the buttons become irregular colours or States without reason then do only what they are supposed to after you press them and return them. ?

  These are common questions of interest because I think for a product, you pay for it should be able to do all the simple things like keeping the objects in place.

  These settings work well for me

• VMware ESXi does not support the RAID on HP Proliant ML110 G5 drives

  Hello

  I installed VMware ESXi on my HP Proliant ML110 G5. I got 3 hard drives on my server at the moment, one of them is VMware ESXi and other two are RAID1.
  Whenever I connect to my server via vSphere client I have the chance to see every HARD drive (datastore) separately.  Is it possible that VMware does not RAID installation?
  I would need to see these two hard drives as a data store. Do you have any ideas on how I can do?
  Thank you.

  like any other typical server, you need to configure the sata raid controller RAID5/RAID0. but keep in mind that this controller without any battery backed cache would have very horrible performance. Another way is that you can use datastore span to provide as a large store of data, but if you lose all of the computer, you will lose all data.

• ESXi does not recognize the PCI network cards

  Good afternoon-

  I am trying to add a few new ESXi hosts to my virtual machine environment and I want my NIC integrated with the PCI NICs for tolerance to failures of the team.  ESXi is not to see the PCI network cards.  I can't find a way on how to add them to the host.  Add network cards in VC shows just the cards integrated network, the same as the ESXi console (or what there is of it).  What I'm missing here?  Thanks in advance.

  Server = PowerEdge R710

  Is what model of network interface cards?  You may need to install drivers for them - http://downloads.vmware.com/d/info/datacenter_downloads/vmware_vsphere_4/4#drivers_tools.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Second free ESXi does not work up to disconnect first ESXi

  Hello, I have a free ESXi work to a Fujitsu RX300 server without problems.

  But now I installed an another ESXi on a Dell PowerEdge 2850 server and after an installation successfully, I can not ping the machine.

  If I disconnect the LAN of the ESXi first then second ESXi works correctly.

  Is there a limitation?

  It is necessary to do any special configuration in order to have two standalone ESXi works on the same LAN?

  Thanks in advance.

  ESXi is not a local console

  In fact, it does.  There is a possibility that you have a conflict of MAC address I think the above poster was referring to.

  In the yellow screen, press ALT + F1, and then type not supported - you won't see any output on the screen until you press on enter.  At the password prompt, type in your root password.

  In the CLI, use the esxcfg-vmknic-l command to review the VMKernel port settings.  You want to watch the interface "network management".  Check the IP address and the MAC address from the other ESXi host to determine if you have any conflicts.  If you do, you can use esxcfg-vmknic with the d - and - an arguments to delete and recreate the VMK interface.

• ESXi does not allow 64-bit customers, why?

  I have here a machine that was happily running Linux + VMware Server, 32 and 64-bit hosts. I have ESXi 3.5u4 on it, but the on-board NETWORK interface was troubled.

  I installed ESXi 4.0 and SATA only required no hackery and the NETWORK card has worked, and I was ecstatic.

  Then I tried to add my VMs to him through the converter. "Host does not support 64-bit clients.

  I thought you had to be a blunder, a problem with the converter.

  Set up a new guest Vista64 from scratch, has begun to install, crash "your computer doesn't support 64-bit mode". WTF?

  HP dc5800 with a Core 2 Quad Q6600. AT VT.

  Why would he not be able to run the 64-bit ESXi 4.0 clients? He ran sub 3.5u4 and under Server 2.0 + Linux host.

  Make sure that the virtualization (or VT) is enabled in the BIOS.

  Also check in HCL to see if your system is compliant:

  http://www

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• category of recordset to filter the slot category does not, what am I doing wrong

  I've done this lots of times, but must have made a mistake, because I can't make it work

  I have a list of category show all categories

  ymysql_select_db ($database_lotties, $lotties);

  $query_rsProductData = "SELECT * FROM lottieCat ORDER BY lottieCat.CatName";

  $rsProductData = mysql_query ($query_rsProductData, $lotties) or die (mysql_error ());

  $row_rsProductData = mysql_fetch_assoc ($rsProductData);

  $totalRows_rsProductData = mysql_num_rows ($rsProductData);

  ? >

  <? PHP {? >}

  < a href = "subCat - list.php?" subCat = <? PHP echo $row_rsProductData ['subCatID'];? > "> <?" PHP echo $row_rsProductData ["productGroupGUID'];? > < br / >

  < /a >

  <? PHP} while ($row_rsProductData = mysql_fetch_assoc ($rsProductData));? >

  <? PHP

  mysql_free_result ($rsProductData);

  ? >

  but the link I want to send the page, but it does not work to the subcategory. Here's the sql code of the category sup page

  $varCat_rsProductData = '0 '.

  If (isset($_GET["subCat"])) {}

  $varCat_rsProductData = $_GET ['subCat'];

  }

  @mysql_select_db ($database_lotties, $lotties);

  $query_rsProductData = sprintf ("" SELECT * FROM LOTTIE_subCats, lottieCat WHERE lottieCat.CatID = LOTTIE_subCats.CatID AND lottieCat.CatID = %s ", GetSQLValueString ($varCat_rsProductData,"int")");

  $query_limit_rsProductData = sprintf ("%s LIMIT %d, %d", $query_rsProductData, $startRow_rsProductData, $maxRows_rsProductData);

  $rsProductData = mysql_query ($query_limit_rsProductData, $lotties) or die (mysql_error ());

  $row_rsProductData = mysql_fetch_assoc ($rsProductData);

  joins in the table are

  table = lottieCat

  CatID

  CatName

  table = LOTTIE_subCats

  subCatID

  CatID

  then the product is

  table = LOTTIE_products

  subCatID

  what I am doing wrong

  OK, so if you want to produce a list of subcategories, you do not need to join to the table of categories.

  $query_rsProductData = "SELECT * LOTTIE_subCats WHERE LOTTIE_subCats.CatID = %s;