ESXi / ESX and DAS

Similar Questions

• investigating the slot sizes and ESX and ESXi 4 4 classic

  I was looking for to set the AP following advanced settings option:

  das.slotCpuInMHz

  das.slotMemInMB

  The reason why because that I don't use of tickets in a few groups of ESX host, but I don't want the slot by default size to use.  So I have a cluster of the armies of ESXi4 and went in the advanced options of the AH and set these parameters, and when I go under Advanced tab LENGTH info summary of cluster slots have clearly changed.  When I try to do the same process on a classic cluster ESX 4, by adding in the settings for the advanced options of the AH, nothing changes in the advanced performance info.  It's as if the settings do not work with ESX classic 4.  These functions only work on ESXi 4 and not ESX 4 classic?

  You can change the size of the slot, but be careful with these settings. Think twice before you edit and do not set a level of memory.

  This is the very good detailed explanation how it works: http://www.yellow-bricks.com/vmware-high-availability-deepdiv/

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• VCenter Server first to 5.5.0U3b update and later update of VMware ESXi ESX / will I have problems?

  Hello

  have trouble when I first updated my signature single vCenter Server and later update my vSphere hosts?

  A vCenter Server Version 5.5.0U3b should be able to manage vSphere Host Version 5.5.0 GA, right?

  Kind regards

  Roland

  The vCenter Server 5.5 update 3 b can manage VMware ESXi ESX release GA to 5.5 5.5 update 3 b, take a look: VMware product interoperability Matrices

  BUT, according to the interoperability matrices and vCenter Server 5.5 update 3 release notes, VMware strongly recommends you upgrade your hosts to 5.5 update 3 b, see:

  What's new

  • Update Support for the SSLv3 Protocol is disabled by default
    Note: In your vSphere environment, you must update vCenter Server vCenter Server 5.5 update 3 b before the update to 5.5 ESXi ESXi update 3 b. vCenter Server will not be able to manage 3B ESXi 5.5 update, if you update ESXi before update vCenter Server to version 5.5 update 3 b. For more information about the sequence in which vSphere environments must be updated, see KB 2057795.

  • VMware strongly recommends you update ESXi hosts to ESXi 5.5 update 3 b management of vCenter Server 5.5 updated 3B.

  VMware does not recommend the reactivation of SSLv3 because of the vulnerability of POODLE. If all you must enable SSLv3, you must activate the SSLv3 Protocol for all components. For more information, see

  KO 2139396

  .

  • Resolved issues. This version of vCenter Server 5.5 update 3 b solves the problems that have been documented in the resolved issues section.

• Store of data sharing between 4 ESX and ESXi 5

  Hello

  I have a vSphere environment 4.1 with a vCenter and a cluster of 3 ESX 4.1 access to the content of data through fiberchanel (type scneario) warehouses.

  And now I need to install a new ESXi 5.x (cannot be a different version) in a separate environment, outside of the current vCenter, BUT to access the warehouses of data even as the cluster of vSphere 4 current.

  Anyone know if there should be no problem sharing between 4 ESX and ESXi 5 access to the same data storage?

  Thanks in advance

  As long as the FC zoning is configured properly, avoid all the problems.   ESXi 5 will be able to see the data created by ESX4 VMFS3 stores, it will not be able to create the same size of virtual machine he can on a 5 VMFS datastore.

• Need a powercli script to create a new account a local administrator on all ESX and ESXi hosts in the vcenter

  Hi all

  If someone can help me with a powercli script to create a new account a local administrator on all ESX and ESXi hosts in the vcenter, create a role called admin and give all access except the root. This shoulb be past by a virtual centre.

  Very much appreciated to help him.

  Kind regards

  MelLvin

  I suspect that you posted your question to the wrong thread

  This requires only a minor change to the script above actually.

  Something like that

  $groupName = "group"$accountName = "user"$accountPswd = "password"$accountDescription = "A user"
  
  $esxlist = Get-VMHostforeach($esx in $esxlist){    Connect-VIServer -Server $esx -User root -Password "password"
  
      Try {      Get-VMHostAccount -Id $groupName -Group -ErrorAction Stop | Out-Null    }    Catch {      New-VMHostAccount -Id $groupName -GroupAccount | Out-Null    }
  
      $rootFolder = Get-Folder -Name ha-folder-root    Try{        $account = Get-VMHostAccount -Id $accountName -ErrorAction Stop |        Set-VMHostAccount -Password $accountPswd -Description $accountDescription -AssignGroups $groupName    }    Catch{        $account = New-VMHostAccount -Id $accountName -Password $accountPswd -Description $accountDescription -UserAccount -GrantShellAccess -AssignGroups $groupName    }
  
      $rootFolder = Get-Folder -Name ha-folder-root    New-VIPermission -Entity $rootFolder -Principal $account -Role admin
  
      Disconnect-VIServer -Confirm:$false}
  

• Script - missing and hotfixes installed for ESX and ESXi

  Can I have the script i.e. missing and hotfixes installed for ESX and ESXi using the CLI power only? out put should be csv format

  You reset the content of the table $Results on each iteration of the baseline.

  Try like this

  $Results = @()
  foreach($esx in Get-VMHost) {
    foreach($baseline in (Get-Compliance -Entity $esx -Detailed | where {$_.Status -eq "NotCompliant"})){
      $Results += $baseline.CompliantPatches |    Select @{N="Host";E={$esx.Name}},    @{N="Status";E={"Compliant"}},    @{N="Baseline";E={$baseline.Baseline.Name}},Name,ReleaseDate,IdByVendor,    @{N="KB";E={(Select-String "(?http://[\w|\.|/]*\w{1})" -InputObject $_.Description).Matches[0].Groups['url'].Value}}
  
      $Results += $baseline.NotCompliantPatches |    Select @{N="Host";E={$esx.Name}},    @{N="Status";E={"NotCompliant"}},    @{N="Baseline";E={$baseline.Baseline.Name}},Name,ReleaseDate,IdByVendor,    @{N="KB";E={(Select-String "(?http://[\w|\.|/]*\w{1})" -InputObject $_.Description).Matches[0].Groups['url'].Value}}
    }
  }
  $Results
  

  It will give the installed and lack of patches which are defined in the non-compliant baslines related to the ESXi host.

  If you want to see all the lines, also the most consistent, omit the Where clause on the base line (foreach) loop.

• ESX and ESXi

  What are the fundamental differences between ESX and ESXi. Someone could it say please interview point of view. Just need about 4 to 5 differences.

  Thank you

  Prashant

  The difference between ESX and ESXi, ESX was the classic version with a dedicated Service console embarked with him, however, ESXi is the version of Vsphere without the Console service. Because ESXi is without the service console, so its size is very small and its called summer have footprint small disc. With the release of VSphere VMware 5.0 and later versions has deprecated the classic ESX version there is therefore no now unavailable ESX and we only ESXi now.

• Differences between ESX and ESXi

  Hai,

  As I am new to VI environment I doubt that where features ESX and ESXi are different, it may be stupid but can help me a lot.

  Hello

  Please check the link to the differences between ESX and ESXi below.

  http://www.VMware.com/products/vSphere/ESXi-and-ESX/compare.html

  Please note ESX is present in version 3.x, 4.x. starting vsphere 5.0, we have only ESXi.

  ESXi doesnot have a service console and has the smallest footprint of 70 MB and so is safer and more reliable, because it has a smaller surface set.

  Please allow points if you find the article useful.

  Thank you

  Aakash Jacob

• DRS cluster: You can mix 4.1 ESX and ESXi 4.1?

  Not very complext, but we have a DRS cluster of 8 hosts x 3850 of IBM on ESX 4.1 and we will upgrade them both to ESXi 4.1 update 1.  There will be questions mixing a cluster of ESX and ESXi servers?

  Yes, 100% supported!  both are the same hypervisor, so you should have no problem running in the same cluster.  After all it is the best way to do a upgrade spread, and how we made our move between ESX and ESXi.

• VMotion with ESX and ESXi in the same cluster.

  My client wants to spend his whole army ESX 4.0 to ESXi 4.1 host. I know that it requires a clean install of the host. But vMotion always works in a cluster with a mix of the host ESX 4.0 and ESXi 4.1?

  You will be fine to have a mixed group of ESX and ESXi hosts.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Is it possible to use GPFS or another build is a SAN storage shared for multiple ESX and ESXi hosts?

  We have a license GPFS and SAN storage. I am trying to create a storage shared for multiple ESX and ESXi hosts share existing virtual machines. We tried once NFS, it of a little slow and consume too much bandwidth LAN.

  Anyone can help answer? Thank you very much in advance!

  It depends on your storage space.

  You must connect all hosts to the same San, then follow the configuration guide of ESXi and specific documentation for your storage space (for sharing LUNS on multiple hosts).

  André

• store of data sharing between ESX and ESXi?

  Hello everyone

  This is something I have not yet tried, but is it possible to share the same store of data between ESX and ESXi (version 4)?

  /MH

  Without a doubt.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• 4.0 ESX and ESXi 4.0 together on vCenter

  HI - could someone please tell me if I can manage ESXi through vCenter, if I have only the ESX host it currently?

  Yes, provided that you have permission to do this.

  If you manage a host in vCenter while it should be allowed (i.e. you cannot continue to use the 'free' ESXi license and manage it via vCenter, you need CPU licenses for this host)

  ---

  If you have found any of my reviews useful please consider giving points to 'Correct' or 'useful '. Thank you!!!

  www.beyondvm.com

• ESX and ESXi - OS Question

  I understand that ESXi is OS independent due to the removal of the "Service Console", which is based on Linux.  My question is "until this means I don't need Linux to install ESXi? and what does it need to be installed on the physical host computer or it could be a VM as well? and finally is - anyone know where I can get a video of how on this configuration?

  ESX (i) are two metal blades installed.

  Documentation can be found on

  http://www.VMware.com/support/pubs/vi_pages/vi_pubs_35u2_3i_i.html

• Disk VMDK in ESX and ESXi

  Hello

  The structure of the VMDK disks is the same in ESXi and ESX?

  Can I migrate VM of ESXi ESX servers without problems?

  Thanks for all!

  fix. We have the same blades running in the same box.  Build a new ESX Server on your free blades, once it's online, migrate all VM off local storage, the new ESX host with shared storage and so forth.  You can do this hot or cold.  Cold would close the virtual machine and choose to migrate, and in the wizard select "move" instead of keep, hot would sVmotion.

  Shouldn't be a problem.