ESXi with a different number of CPUs

Similar Questions

• When I rename my image (F2), I don't want to start with 1, but with a different number.

  When I rename my image (F2), I don't want to start with 1, but with a different number. I chose "number of images (0001)", concatenated with other data.

  I found a help of ambient light that says to change the "bib" but I can't find this setting. Where is it?

  Thanks for your help

  Hi carcala,

  When you go to Photo rename (F2), you must choose the Custom name - sequence in the menu drop-down

  You can enter the starting number according to your choice.

  Kind regards

  Claes

• 6602 synchronized with a different number of pulses per channel pulse generation

  Hello

  I try to use counters NI 6602 to generate 4 pulse trains that begin together but then proceed with each counter producing its own number of pulses (over mode) with its own frequency.

  It seems that each of the 4 channels of wiring at the same special teams each channel to produce the same number of pulses based, apparently, on which channel was recently with the specified NumPulses value so that it is the (implicit) VI DAQMx Timing.

  I tried to use separate tasks for each channel, but it seems that the there is much more uncertainty in the initial start of the train of impulses on each channel: unique task ~ 13us (coherent) delay between channels, a task for each channel (variable)... Although I'm not entirely confident in these temporal measures (estimates of the oscilloscope) +-15us. So it seems I'm sacrificing some synchronization to produce a different number of impulses for each channel?

  Is it true, or is there another way to match the beginning of the independent pulse trains.

  Vadim

  You should be able to synchronize the start of 4 separate meter output tasks by having all the

  looking for a common startup trigger signal.  You can easily do yourself the trigger signal on

  (for example) PFI_0 using a digital task rocking DIO_0.

  -Kevin P

• 'For' loop with a different number of iterations. Second, the auto-indexation of the tables with different sizes is done. It can affect the performance of the Vi?

  Hello

  I have a loop 'for' which can take different number of iterations according to the number of measures that the user wants to do.

  Inside this loop, I'm auto-indexation four different 1 d arrays. This means that the size of the tables will be different in the different phases of the execution of the program (the size will equal the number of measures).

  My question is: the auto-indexation of the tables with different sizes will affect the performance of the program? I think it slows down my Vi...

  Thank you very much.

  My first thought is that the compiler to the LabVIEW actually removes the Matlab node because the outputs are not used.  Once you son upward, LabVIEW must then call Matlab and wait for it to run.  I know from experience, the call of Matlab to run the script is SLOW.  I also recommend to do the math in native LabVIEW.

• Hosts in cluster with a different number of physical processors

  Hello

  Don't think it would be a problem but just validate...

  Can I have a cluster where the hosts have a different number of physical processors. All processors will be the same make\model\speed. Also, it will be only a temporary configuration.

  Thank you

  Hello.

  This configuration is very good.

  Good luck!

• Add Server ESXi in Vcenter 5.5 cluster with a different number of socket

  I have 5 nodes compute node IBM Flex System X 240 8737T7M with 2 CPU Socket in a VMS Cluster with identical hardware and now I need to add 1 more IBM System Flex X 240 node calculate 8737T7M with 1 CPU Socket in the same cluster.

  Here are other points: -.

  VCA Mode is disabled in this cluster.

  5 existing and new are the same model of CPU and memory is of the same capacity.

  Only the difference is 5 knots with 2 sockets and another node is 1. Please notice is recommended and he face any technical problem.

  VMware ESXi 5.0 and Vcenter is 5.5

  
  

  Hello

  VCA mode is not required when the generations of CPU on the server is the same.

  Adding your host in the cluster will work then.

  He advised not to add servers to a cluster with mixed material config. A possible problem might be the Admission HA control for example settings. If you configure a number of hosts reserved for failover, you may encounter problems with your hosts do not match each other. Here, you define the ability to failover in percentage.

  Tim

• How can I play files CSV lines with a different number of columns?

  Hi all

  I am trying to load CSV with DIAdem 2014 files, and I found there is a great tool, "use".

  However, with the CSV use tool, there are critical problem with my data files. (See photo)

  As you can see the CSV file attached, it includes a lot of lines with different columns.

  And here, use read the number of columns of 1st line (e.g.: 4 columns) and set it as the number of columns to read.

  So I can not load all of the data (e.g.: 53 columns) if first row data were lower than columns.

  Can anyone recommend any approach, please?

  Kind regards

  Young

  Admin 24/03/16 Note: files deleted by request of the user

  I just add a few lines of script and fix the related use. (I just added the code to get a direct look).

  The uri of the file will appear as a new kind of load in the dialog file tiara is intalled by double click

  Would be nice if you could provide some information, how the data was created. Maybe we can it add as official of our web page to use plugin.

  Option Explicit
  
  Void ReadStore (File)
  File.Formatter.Delimiters = «»
  
    File.Formatter.LineFeeds = \n
  
    File.Formatter.DecimalPoint = '. '.
  Dim startLine: startLine = file. GetNextLine()
  
    <>InStr (startLine, ' [Tenergy Bus Log Data] "" ") then
  
      call RaiseError()
  
    end if
  And that not File.Position = File.Size
  
      Dim groupName: groupName = file. GetNextStringValue (eString)
  
      If it isn't root. ChannelGroups.Exists (groupName) then
  
        root. ChannelGroups.Add (groupName)
  
      end if
  
      Dim grp: set grp = root. ChannelGroups (groupName)
  
      Dim i: i = 1
  
      do for real
  
        Dim val: val = file. GetNextStringValue (eR64)
  
        If isempty (val) then
  
          Exit
  
        end if
  
        < i="">
  
          dial the grp. Channels.Add ("Brand" & I, eR64)
  
        end if
  
        protected chObj: set chObj = grp. Channels (i)
  
        chObj.Values (chObj.Size + 1) = val
  
        i = i + 1
  
      loop
  
      Call File.SkipLine)
  
    Wend
  End Sub

• Different output meter with a different number of samples

  I m using a calendar 6602 i/o Board or a MIO 6281. For controlling the distribution of our measures, I use different counters of two boards that have been triggered by a Digital Out for synchronization. The counters are made CO Pulse Time, implicit, digital synchronization triggered and the sample mode finished.

  Suppose I use two Ctr´s to map 6602. My problem is when you set the number of samples of only CTR for another value, then the second I m getting an error. The rest works perfectly, I can use different delays in starting, low or high times, only samples different amounts Don t work. It s without worrying if I use the Timing of e/s or Multi i/o Board.

  For example:

  _ _       _ _

  CTR 0 / 6602 _ |     |_ _|     |--> _ _ 2 samples

  _ _

  CTR 1 / 6602 _ |     |_ _

  Someone an idea or a tip?

  Hello

  two counters are used for a generation of fenite impulses. Please see the link below.

  Link:
  http://digital.NI.com/public.nsf/allkb/9D1780F448D10F4686257590007B15A8?OpenDocument

  For example, you can use Ctr0 and Ctr2.

  Concerning

  Rüdiger

• Adding images to a table with a different number of rows and columns

  I get images from PC file in labview table... I can specify the number of columns and get a picture with the size of the column, but must continue to put images in the table until the size of line is filled.  My goal is to have the pictures in the folder to be a 37-49 lines columns... Unfortunately the berries stops (see VI) until all the images are introduced in my table... How can I keep having these columns add pictures until all lines are met (and all the images are filed in the new array)?

  Hi Lynn:

  I changed my index of 49 x 49, give my columns entry 37... then all the images appear.  Thanks for your help. Kudos to you...

• How to plot graphs with a different number of values

  Hello guys,.

  After a few hours, I have to give up and you ask for help.

  The problem:

  It must be possible to disregard some of the measured values. The measure and valid points should appear in the same graph (for example, the measured values of 'x' and valideded 'o' data. Valideded data would look like a circle with an 'x' in the middle).

  So far so good.

  The time difference between the measured data (dbl-table) is always the same (20-30 seconds).

  I tried (see attachment):

  If the measured value is not valid, I delete this value and change in this case the 'dt' in the waveform (see loop 2), if I get the data I want.

  I tried different ways, but I can't to plot the data in a single chart (I think because the timedifference 'dt' is not the same)

  You have an idea, how can I draw the graphs shown in 'graphic linear adjustment' and 'validated card data' in the same chart?

  Maybe I need to use the "graph" and not "table"?

  I chose graphic because it must be possible to hide/show each plot (but me, I'd work with graph as well)

  I hope I described the problem well and you can help me. I'm sure, it's possible and probably easy, but I'm not

  Thank you!!

  Hi Alex,

  do the old trick of NaN - !

• Is it possible to update your account with a different number from another country of residence?

  I want to change to UK in the Philippines, is there a way to do this rather than cancel the current account and create a new account?

  Hello

  Please see change the country associated with your Adobe ID

  Kind regards

  Sheena

• Studio EN - is there a work around for the problem of referencing data from a grid with a different connection of DB and # different dimensions?

  Hello

  I'm making reference to a column in a different grid with a different database connection. I did some searching in the forums, and it seems that it is a known problem with EN Studio. The problem is that if 2 different database connections have different number of dimensions, then the reference will throw an error.

  For example, what I try to do, is below:

  In grid2.column [A], I have the following formula:

  Grid1. Column [A]

  The result is an error.

  The ultimate goal is to have a base of variance formula in the grid between grid1 and grid2, who have connections to different database with a different number of dimensions. Is there a solution to this bug? The example of the basic formula is less to:

  Grid1. Column [A] - grid2.column [A]

  Any help is very appreciated!

  Thank you

  Tiffany

  Have you tried to change the database connection in a row instead of create a new grid?

• I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase?

  I want to buy an iBook. There are 2 different books with the same name, author, and the book cover. They are different number of pages with different prices. Specifically, all the light that we do not see. " How do you know that we purchase?

  I would get one that has 4700 comments already.

• VCA with processors different hearts?

  Hi all

  My Cluster have four hosts ESXi with model CPU = Intel (R) Xeon E5645 of CPU @ 2.40 GHz-6 carrots. I need to add our existing stand-alone HP DL380G6 servers in the same cluster. Model of processor for the HP DL380G6 Server = Intel (R) Xeon CPU E5530 @ 2.40 GHz-4 nuclei. I know CVS remove UC has top model and create the line basis for the CPU features that are available in all of the central units and I don't know how CVS works with different physical cores of the processor? Please suggest me.

  VCA or vMotion compatibility in general cares not at all on the number of cores that physical processors of your have. The layout is completely hidden from the guest, then it does not matter in a perspective of VMotion if you mix 4, 6 or 8 core hosts in a cluster.

  However, what really matters, is the generation of CPU and the instructions of the respective most recent processors have as opposed to the previous.

  Your Xeon 55xx processors belong to the family of Nehalem, whereas the 56xx are part of the Westmere family. Virtual machines running on processors 56xx natively (without CTS configured) or with Intel Westmere VCA base will not be able to be vMotioned on 55xx hosts.

  So, you'll need the level of reference VCA of your cluster to the generation of Intel Nehalem.

  For more information, see the following articles in the KB.

  http://KB.VMware.com/kb/1003212

  http://KB.VMware.com/kb/1005764

  http://KB.VMware.com/kb/1991

• EqualLogic GroupManager displays a different number of replicas, 2 outgoing and incoming 1.

  GroupManager displays a different number of replicas, 2 outgoing and incoming 1.  Is this a normal behavior?

  

  I raise this question to technical assistance from Dell.  They checked with their lab environment and confirmed the same behavior.  There is no functional cause whose status is displayed like this.  Two points, they said:

  (1) the number of the line leaving includes the history of replication.   It will show you an extra line in addition to the number configured in the replica set. (in my case, it's 1 (configured) + 1 (extra), so 2 total)

  (2) the number of the replica by entering the real number of replica set used for the function of data redundancy.