European Toll Bypass restrictions?

Similar Questions

• Calcmgr rules bypass restriction of read/write planning unit property?

  Hi all.
  
  11.1.2.2 planning
  
  I have obsaerved a rule configured to allow writing a value on an intersection in the form of database, work around the property unit planning allowing users to write to an intersection in a unit which is not in their possession and where they are not able to write from the user interface.
  
  Is this normal/from always in this way?
  
  I have a requirement that the user does not see the tree full account when loading a form, as not all accounts are relevant for all entities. That's why the missing lines are deleted. In order for a missing line become visible on the form that I've implemented a rule that allows to enter the value of the account, which then becomes visible on the form. However this same rule when it is executed by a user on a planning unit they don't possess can still change the values the user cannot be changed in the user interface because it is not owner of a planning unit.
  
  I guess that's due to the fact that the property unit planning restrictions do not apply in essbase and the rule go directly, but I want to know if it is expected that business rules fail to honor the restrictions on ownership on the planning units.
  
  Agnete
  
  Published by: Agnete on 23 August 2012 15:23

  They are correct, that the calc will run everything you say it runs. If you use a business rule, it will always run the calc on what you say it is running, but you can ask a member (or take it from the form) and your statement to fix to the right so that the calc only works on the command prompt. The prompt is related to security and the user can select a member, that they do not have access. That might help with your problem.

  Kyle Goodfriend
  www.In2Hyperion.com

• Disable iPhone camera 5s (without use restrictions)

  Hi all - can really use help here from all the geniuses out there. I work in the defense industry and am not allowed to bring a smartphone with a camera on it to work except if the device has been disabled. It is not possible to have the permit as it is easy to bypass restrictions. I know it has been possible with the iPhone software, but I was curious if Xcode is possible or if there is another option. The apple store near is more than an hour so I was hoping that someone had an idea. Thank you

  There is no way to completely disable the device in the firmware.  And are you sure could still?  I have friends in the army, whose positions have the same restriction on cell phone cameras, and told them they could only bring in phones that do not completely have a design camera.  Anything with a camera was refused, period (probably because they don't want to go through the effort to really check that all phones with a camera are actually and permanently disabled).

• How can I bypass the network work restrictions for access Skydrive files

  original title: questions of skydrive

  at work computers with limited Internet Access won't allow to skydrive so cannot open files.  need the option to send an email the old-fashioned way, how can I work around skydrive

  Just join the files as attachments and not photos or office documents and skydrive will be bypassed.

• Attach restrictions makes it unnecessary

  There is an IMPORTANT gap in the system Restrictions of Apple - tie.

  Any child smart enough to attach their phone to another device can bypass any restriction of site that have been put in place. Carries most refuses to disable the hotspot feature, leaving parents to a total loss.

  I'm confused why Hotspot settings aren't available restriction. I realize there is currently no solution to this problem - any chance we can expect Hotspots to be a restrictable element in the future?

  http://www.Apple.com/feedback/iPhone.html

  http://www.IMore.com/how-to-parental-controls-iPhone-iPad

• How can we restrict a Web sites in firefox?

  I want restricted some sites so that I won't be able to open that Web sites.

  It can help to know something about the reasoning behind this request. You may be interested in the articles block / unblock websites with parental control on Firefox & Private Browsing - use Firefox without saving history

  There are other things that can be done, but do not forget the children can access the internet by other means, including computers, phones & friends.

  And any user knowing enough can hold account install another browser or even a different operating system on your computer to bypass the restrictions that you try to apply.

• How do you restrict web browsing to show only sites specified for commercial use?

  Hello, I need to restrict the use of Firefox and Internet Explorer only specified websites that we use for professional use.
  I have a problem with a number of employees who use Web sites not authorized and dangerous who put my computers of the company at risk.
  Since it is impossible for employees to real-time listening habits of the police, I need to restrict the view. How can I set up a list of only authorized sites that can only be substituted by despite user accounts admin privileges?

  You will need to block these unwanted sites in a firewall or router, or proxy and only allow access via this proxy.
  
  All other means can easily bypassed, starting Firefox in Firefox to troubleshoot in Safe Mode if it is an extension or by using a portable version of Firefox.

  Your above posted the details of the system tampon() obsolete show with known risks of security and stability.

  1. Shockwave Flash 10.0 r45

  Update the Flash plugin to the latest version.

  • http://www.Adobe.com/software/Flash/about/

• It is possible to install free apps without a password or contact ID? In settings under restrictions > password settings, the options of free downloads is grey.

  I got a new iPad Mini 4 and the file downloaded all of my old iPad Mini 2 from iCloud, including parameters. However, when I try to install free applications on the App Store, I'm asked to verify my password. I checked my settings of restriction and enabled apps install but in the password settings (fewer restrictions affecting), the rocker switch to demand a free download of password is switched on and grey so I can't turn it off. In addition, with switch app install restrictions tipped off, completely missing my home screen App Store icon. When I turned the restriction to install apps on the App Store icon reappeare. My guess is that Apple is no longer us gives the opportunity to bypass verification of password for the installation of the same free applications, but I thought I would ask if anyone had a solution.

  It is not related to the limitation, but may be what you are looking for: settings > iTunes & App Store > Password Settings > request password - off

• "Unable to connect because of an account restriction" Windows XP virtual machine as administrator

  I got virtual machine today and just downloaded some software that requires a reboot. Earlier, before the reboot, I wanted to remove my password I had set for the account, I went to the properties of the user in the control panel and changed my password for nothing. Problem is that now when I try to log in I get "Unable to connect because of an account restriction" even if I am the admin in the console. Anyone know how I can bypass this login/reset my password? I can not at all in the machine. I'm just stuck when connecting. And there is no safe mode F8 command at startup for virtual methods, I've tried. Thanks in advance.

  Okay, so I managed to fix it myself.

  For the love of everyone, go to your folder of VMS (search for it in the start menu if you can't find it), and ONLY if you have built your way out of a previous virtual disk (such as Virtual XPV HD) and always have access to this file, delete your virtual machine. This same folder. Then create a new machine with the file of virtual disk mentioned earlier, when you are prompted, and then run it. When it comes to the administrator, you will not have a password and it will record you up. Now, before closing, make sure that you change your password for an actual password to avoid that.

  If you have followed this by following the instructions, you should have more, if not all of your files back and resumed control of the console. I hope this helps. :)

  -Scalise

• Control parental time being bypassed

  Recently, I used the Parental control to block the user account for my daughter after 23:00. Despite not knowing the Admin password, it has been able to change the time settings in Vista, allowing it to bypass the restrictions of time.

  Initially, I changed the Admin password, but she was still able to change the time. I then tried to block the use of the program Date and time by using the Parental controls on his account but can not find the program listed. Can you help me?

  Thanks in advance.

  Hi Anne,.

  You can go to regedit and see if some kind, your daughter changed the permissions which can change the time system. Normally, you must be an administrator to do so, but we can look and see if his account is there.

  Go to start. In the start search box, type Regedit.

  Scroll through and develop the following parameter:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation

  With the TimeZoneInformation highlighted in the menu at the top go to Edition.
  Select permissions.
  On the Security tab, verify that has permissions on this key.

  By default, it should be:
  Creator owner
  System
  Administrators (your name as an administrator should be here)
  Usesrs (your name should be here also as an administrator)

  If you girls name is here, and then highlight the name and then click on remove.
  And then click OK.

  Be careful in the registry as changes here are final once you clicked OK and close out of the registry. If you have any questions, do not changes and reply back here and I'll help you.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Please answer back with an update.

• Mac-auth-bypass fails MAC: 0000.0000.0000

  I have an old JetDirect which does not support 802.1 x. I enabled MAB on the port where it connects, but for some reason fails any MAB. I activated the debug dot1x and stick the output in a few here. I know that my config to dot1x is good... I have clients who authenticate via RADIUS to my ACS server. I also have a different port using MAB, not a JetDirect, however, the two ports are configured in the same way. Debugging, it seems that the switch can glean from the CMA of the JetDirect. Any ideas? It is a 3750 with 12.2 (44) SE2. I tried to close/no close the interface, reset the JetDirect, nothing seems to work. I see no request on my ACS server for the MAC address of the device.

  Group AAA dot1x default authentication RADIUS
  Group AAA authorization network default RADIUS

  host 192.168.x.x auth-port 1645 1646 RADIUS server acct-port

  interface FastEthernet2/0/31
  Description white A002
  switchport access vlan 112
  switchport mode access
  switchport voice vlan 800
  switchport port-security maximum 3
  switchport port-security
  aging of the switchport port security 2
  security violation restrict port switchport
  inactivity of aging switchport port-security type
  bandwidth share SRR-queue 10 10 60 20
  form of bandwidth SRR-queue 10 0 0 0
  MLS qos trust device cisco-phone
  MLS qos trust cos
  Auto qos voip cisco-phone
  dot1x mac-auth-bypass eap
  dot1x EAP authenticator

  self control-port dot1x
  multi-domain host-mode dot1x
  restrict the dot1x mode violation
  dot1x tx-timeout 2
  dot1x timeout supp-timeout 10
  spanning tree portfast
  spanning tree enable bpduguard

  012729: 5 May 14:51:31.672: dot1x-package: dot1x_txReq: EAPOL packet sent to the default authenticator
  012730: 5 May 14:51:32.586: % LINEPROTO-5-UPDOWN: Line protocol Interface FastEthernet2/0/31, changed State to
  012731: 5 May 14:51:33.727: dot1x-package: from a package of EAP EAP request for mac 0000.0000.0000
  012732: 5 May 14:51:33.727: dot1x - sm:Posting EAP_REQ client = 4219220
  012733: 5 May 14:51:33.727: dot1x_auth_bend fa2/0/31: during the auth_bend_request State, had 7 (eapReq) event
  012734: 14:51:33.727 may 5: @ dot1x_auth_bend fa2/0/31: auth_bend_request-> auth_bend_request
  012735: 14:51:33.727 may 5: request_action called dot1x-sm:Fa2/0/31:0000.0000.0000:auth_bend_request_
  012736: 14:51:33.727 5: dot1x-sm:Fa2/0/31:0000.0000.0000:auth_bend_request_ enter called
  012737: 5 May 14:51:33.727: dot1x-package: dot1x_mgr_send_eapol: code EAP: id 0 x 1: 0 x 2 length: 0 x 0005 type: 0 x 1 data:
  012738: 5 May 14:51:33.727: dot1x - ev:FastEthernet2/0/31: package EAPOL to the address of the EAP group
  012739: 5 May 14:51:33.727: dot1x - ev:dot1x_mgr_pre_process_eapol_pak: determination of role not required on FastEthernet2/0/31.
  012740: 5 May 14:51:33.727: dot1x-registry: registry: dot1x_ether_macaddr called
  012741: 5 May 14:51:33.727: dot1x - ev:dot1x_mgr_send_eapol: on FastEthernet2/0/31 EAPOL packet is sent
  012742: 14:51:33.727 may 5: dump of pak EAPOL Tx
  012743: 14:51:33.727 may 5: Version EAPOL: 0 x 2 type: 0 x 0 length: 0 x 0005
  012744: 5 May 14:51:33.727: code of the EAP: id 0 x 1: 0 x 2 length: 0 x 0005 type: 0x1
  012745: 5 May 14:51:33.727: dot1x-package: dot1x_txReq: EAPOL packet sent to the default authenticator
  012746: 5 May 14:51:35.791: dot1x-ev: received an EAP Timeout on FastEthernet2/0/31 for mac 0000.0000.0000
  012747: 5 May 14:51:35.791: dot1x - sm:Posting EAP_TIMEOUT client = 4219220
  012748: 14:51:35.791 5: dot1x_auth_bend fa2/0/31: during the auth_bend_request State, had 12 (eapTimeout) event
  012749: 14:51:35.791 may 5: @ dot1x_auth_bend fa2/0/31: auth_bend_request-> auth_bend_timeout
  012750: 14:51:35.791 may 5: called dot1x-sm:Fa2/0/31:0000.0000.0000:auth_bend_timeout_enter
  012751: 14:51:35.791 may 5: called dot1x-sm:Fa2/0/31:0000.0000.0000:auth_bend_request_timeout_action
  012752: 14:51:35.791 5: dot1x_auth_bend fa2/0/31: idle during the auth_bend_timeout State
  012753: 5 May 14:51:35.791: @ dot1x_auth_bend fa2/0/31: auth_bend_timeout-> auth_bend_idle
  012754: 5 May 14:51:35.791: dot1x-sm:Fa2/0/31:0000.0000.0000:auth_bend_idle_enter called
  012755: 5 May 14:51:35.791: dot1x - sm:Posting AUTH_TIMEOUT client = 4219220
  012756: 14:51:35.791 may 5: dot1x_auth fa2/0/31: during the auth_authenticating State, had 15 (authTimeout) event
  012757: 14:51:35.791 may 5: @ dot1x_auth fa2/0/31: auth_authenticating-> auth_fallback
  012758: 14:51:35.791 may 5: called dot1x-sm:Fa2/0/31:0000.0000.0000:auth_authenticating_exit
  012759: 5 May 14:51:35.791: r called dot1x-sm:Fa2/0/31:0000.0000.0000:auth_fallback_ente
  012760: 5 14:51:35.791: dot1x_auth_mab: mab_initialize of the initial State has enter
  012761: 5 14:51:35.791: dot1x_auth_mab: during the mab_initialize State, had 2 (mabStart) event
  012762: 14:51:35.791 may 5: @ dot1x_auth_mab: mab_initialize-> mab_acquiring
  012763: 5 14:53:08.831: dot1x_auth_mab: during the mab_acquiring State, had 3 (mabResult) event (ignored)

  HQ_1stFlr_3750 #sh int dot1x fa2/0/31 det

  Dot1x Info FastEthernet2/0/31
  -----------------------------------
  EAP AUTHENTICATOR =
  PortControl = AUTO
  ControlDirection = both
  HostMode = MULTI_DOMAIN
  Violation mode = RESTRICT
  A re-authentication = off
  QuietPeriod = 60
  ServerTimeout = 30
  SuppTimeout = 10
  ReAuthPeriod = 3600 (configured locally)
  ReAuthMax = 2
  MaxReq = 2
  TxPeriod = 2
  RateLimitPeriod = 0
  Mac-Auth-Bypass = active (EAP)
  Timeout = None

  Authenticator Dot1x customer list empty

  Port status = not ALLOWED

  The jetdirect card uses DHCP to get an IP address? If this isn't the case, then the Jetdirect will produce any traffic out to the auhenticate switch. To test this using the front panel of the printer to send a ping packet and see if it triggers the MAB.

• Restrictions of VPN concentrator

  We use an all 3000 series concentrator some users access to a part of our network.

  It has been implemented to allow the PC to communicate with our private addresses (class B).

  I need access to a couple of IP internally (within the class B).

  Is it possible to refuse access to these IP specifically, or should I go and completely re - build the lists allow?

  To do this, the most consistent is to use filters and rules to deny traffic to these IP addresses, click on the following link for it:

  http://www.Cisco.com/en/us/docs/security/vpn3000/vpn3000_47/configuration/guide/polmgt.html

  Create rules and add them to a filter that can then be applied to the group that these clients are connecting to.

  On a different approach, if these vpn clients use the TunnelAll like politics of split tunnel, you can modify the policy to be "exclude the networks in the list in order to bypass the tunnel" and use a list system (which will contain the restricted hosts), and where the traffic is provided for guests, the VPN client will not tunnel traffic. FYI, this will send traffic for guests with this policy of TUNNEL from SPLIT to be sent the text, not routed, but sent in plain text by the vpn client.

• don't convert the file to complete, depending on the restrictions of copyright applied to it. How to do this?

  don't convert the file to complete, depending on the restrictions of copyright applied to it. How to do this?

  Hi clahue1,

  The only way to bypass the security restrictions on the PDF, is to use the password that the author defined for it. If all goes well, you know who created the PDF, so that you can ask for the password.

  Best,

  Sara

• I have FaceTime disabled through restrictions on my daughter's phone.  However, she is still able to make and receive calls FaceTime. If it is limited, how this phenomenon is happening and is there a way to prevent it from happening in the future?

  I have FaceTime disabled through restrictions on my daughter's phone.  However, she is still able to make and receive calls FaceTime. If it is limited, how this phenomenon is happening and is there a way to prevent it from happening in the future?

  How do you know that she can always use Facetime?

  Could she learned/guessed the password restriction?

• WHY is Apple E-Mail Alias transfer - so restrictive?

  When my wife signed to Apple she used one of our gmail accounts of his Apple ID, which is great, EXCEPT that I had used this (name) @gmail for an alias iCloud email address (name) @icloud before it is signed on.  Apple does NOT allow me to transfer this alias so my wife can use it as its primary e-mail address Apple, that would be ideal because it reflects his gmail address?

  WHY Apple is so restrictive with the transfer of an e-mail address, whether it is an e-mail alias or principle?

  In the digital world of today, where Apple has made their Apple ID and email iCloud Apple so very well integrated into the overall experience iOS - it makes it incredibly frustrating that we are unable to make a simple email address switch between my wife and me that would make life easier on the whole regarding the centralization of its emails from Apple Mail account.  (Name) she uses is the one that we used it for many years and he move on to something completely different... not a very good option leaves she have to keep using Gmail as their primary e-mail account...

  Unfortunately iCloud alias cannot be used for distribution among those family.  Inform Apple - http://www.apple.com/feedback/