even if it is already enabled, always ask for activation?

Similar Questions

• How to display the hidden files and folders even if I've already enabled "Show hidden files, folders and drives" to "Advanced settings"?

  How to display the hidden files and folders even if I've already enabled "Show hidden files, folders and drives" to "Advanced settings"?

  After I enabled "Show hidden files, folders and drives" in 'Advanced settings', I can't yet see in the folder but I know there is a file in this program of WinRAR folder form as pictured below where I opened the case both at the same time.

  

  Hope you can help in this case...

  It would be possible that the file is marked as a system folder (which is just a check box in properties such as the hidden check box). So in your folder options, uncheck the "Hide protected operating system files" and see if it will be visible.

  Or another thing to try: remonter back a level, hold down SHIFT while you right-click the complete file and choose "Open command window here", then type DIR to see if the file is listed.

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• How to make the Connect-VIServer cmdlet to always ask for username password

  Hi all

  I use the connect-viserver cmdlet to connect between host windows to my vcenter server.

  using

  The host - Powershell - 2.0, Windows XP, Powercli installed machine.

  Target machine - Vcenter server 4.1.0 on windows 2008 server, in the other subnet

  I want to have a provision that it must always ask for user name and password to connect.

  I took a look at

  http://pubs.VMware.com/vSphere-50/index.jsp?topic=/com.VMware.wssdk.apiref.doc_50/Vim.virtualmachine.html

  resultof = % 22connect - viserver % 22 & http://pubs.VMware.com/vSphere-50/index.jsp?topic=/com.VMware.PowerCLI.cmdletref.doc_50/connect-VIServer.html

  But failed to get the relevant information.

  Any ideas?

  Thank you

  Madalena

  Bangalore-India

  My mistake, Connect-ViServer does not accept a SecureString. You first need to convert it

  Try it like this

  $userName = "username"
  $passwd = Read-Host ("Password for " + $userName) -AsSecureString:$true
  $cred = New-Object System.Management.Automation.PSCredential -ArgumentList $userName,$passwd
  Connect-VIServer -Server MyServer -Credential $cred
  

• Adobe CS 6 Design and Web Premium asking for activation whenever I reboot computer (win7 x 64)

  Hello

  Adobe CS 6 Design and Web Premium asking for activation whenever I reboot computer (win7 x 64). Same thing happens on another machine (the same model computer you) with Adobe Acrobat Pro (CC 2015). To make it even more interesting license Acrobat Pro is brand new and have never been used before.

  How can I solve this problem?

  Sincerely,

  Christopher

  Run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

  or

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Hey I bought iphone 5, 4 years ago. Resetly I update yesterday suddelly asked for activation ID, so I put but did not work. Before I had to change an e-mail and I put in a new. Now demand for old e-mail and what is incorrect.

  Hey I bought iphone 5, 4 years ago. Resetly I update yesterday suddelly asked for activation ID, so I put but did not work. Before I had to change an e-mail and I put in a new. Now demand for old e-mail and what is incorrect. What should I do? I have new Id and worked, but not with my phone.

  I live in Slovakia and I bought this iphone in Florida USA

  Thank you, Maria Nagy

  Any ideas?

• I have a license for Design CS6 and Suite Web and applications downloaded, but they do not load or ask for activation. [was: question]

  I have a license for Design CS6 and Suite Web and applications downloaded, but they do not load or ask for activation. What should I do?

  It's a Mac and finally got to window that let me enter the license key and it works. I thank you for your response and departure to help!

• CS6 and Premiere Elements continues to ask for activation

  Hello

  I am a system engineer in a school. We have a license to Site K12 for CS6 and we bought about 30 versions of single license of elements of Prime Minister through authorized dealers. I have deployed CS6 a few years ago on our old PC by installing the software on a single computer and cloning then the pc 30 times with CloneZilla. That has worked well.

  A year later, I repeated the procedure on the other 25 computers. No problem.

  Last summer, I did the same thing to replace 30 PCs that I had cloned the first time. Since then, I have to activate CS6, again and again once, which indicates a trial version. Also the other classrooms with 25 pc's started asking for activation after 2 years without worries.

  In October I installed Premiere Elements on each individual computer one by one. And that went well for a few months but then all of a sudden PE began to request activation. My colleagues make me crazy with their remarks and their concerns.

  So far, I have tried to activate CS6 by creating a file for serialization with the adobe application manager. When I run the file and restart the program I'm invited is no longer for activation... for a while.

  There is no way of knowing what device invites you at the moment. It is random. Sometimes it's just a camera, then all of a sudden there are 3-4.

  Help, please

  Maarten

  Hi Martin,

  Adobe Premiere elements 12 (single license) requires connection /activation if you installed individually, however, you can remove the sign window using Adobe provisioning toolkit

  If you have to PRE 12 Adobe volume licenses. Please visit the link below to find the workflow.

  First items 11 and earlier versions to deploy. Windows

  Thank you

  Ashish

• El Capitan always ask for an authorization or passwords!

  Hi all.  I just used most recent iMac, mid-2011. 27 "i5 2.7, ram 4 GB, 12.2, first use

  El Capitan of Snow Leopard.

  So frustrating that almost every simple task I want to do, I have a

  Authenticate or enter the user name and password. EG just to move a file in

  a folder, or in the trash.  In addition, either after just want to move a file, copy it

  It is!  I guess it's a problem of user group; I tried disk utility, found

  No permissions problem, don't know what to do.  This isn't the Mac I have

  known and used since 1990!  Thanks for any help, Bob, prisoner of El Capitan.

  Before purchasing a used computer, you must have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.

  The first thing to do after the acquisition of the computer is to wipe the internal drive and install a new copy of Mac OS X. You - not the original owner, must do. Changes made by Apple over the years have made this very complex seemingly simple task.

  How would you do it depends on the model, and if you already have another Mac. If you are not sure of the model, enter the serial number on this page. Then, find the model on this page to see which version of the OS was initially installed.

  It is dangerous and may be illegal to use a computer with software installed by a previous owner.

  1. If you do not have another Mac

  a. If the machine comes with OS X 10.4 or 10.5, you need a Snow Leopard install disc (OS X 10.6) retail boxed and "Shrink Wrap" on the Apple Store or a reputable dealer - no eBay or something of the sort. If the machine is very old and has less than 1 GB of memory, you need to add in order to install 10.6. Preferably, install as much memory can take, according to the technical specifications.

  (b) if the machine comes with OS X 10.6, you need the installation media that accompanies it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media of the original owner, but if you do not, order replacements from Apple. A disc at retail, or the gray discs of another model, will not work.

  To start from an optical disc or a flash drive, insert it, and then restart the computer and hold the C key to start ringing. Release the button when you see the gray Apple logo on the screen.

  c. If the machine comes with OS X 10.7 or later version, you don't need media. It should start in the mode of Recovery of the Internet when you hold down the key combination option-command-R to start ringing. Release the keys when you see a spinning globe. Note that Mac Pro models turn over end of 2014 (with the box of "cheese grater") cannot use Internet recovery, regardless of what version of OS they shipped with. The Mac Pro round (2014 or later) can use it.

  d. some models 2010-2011 comes with OS X 10.6 and received a firmware update after 10.7 was released, allowing them to use Internet recovery. If you have one of these models, you cannot reinstall 10.6 even from the original media, and recovery of the Internet won't work either without Apple ID of the original owner, in this case, contact Apple technical supportor take the machine to an Apple Retail Store or other authorized service provider to have an operating system installed.

  2. If you do not have another Mac

  If you already have another Mac which has been upgraded in the App Store to the version of Mac OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use the recovery disk wizard to prepare a USB device, and then starts the new Mac of it by pressing the C key to start ringing. Alternatively, if you have a backup of OS X Time Machine 10.7.3 or later on an external hard drive (not a time Capsule or other network device), you can start by holding down the option key and clicking in the row of icons that is displayed. Note that if your other Mac has never updated in the App Store, you can not use this method.

  3 partition and install OS X

  a: If you see a lock screen trying to boot from the support installation or recovery mode, then a firmware password has been defined by the previous owner, or the machine was locked remotely via iCloud. You will need to either contact the owner or by the machine to an Apple Retail Store or other provider of service to be unlocked. May asked you proof of ownership.

  b. launch disk utility, and then select the internal drive icon - no volume icons nested beneath it. In the Partition tab, select the default options: a partition table GUID with the volume of data in Mac OS extended (journaled) format. This permanently deletes all existing data on the disk.

  c. an unusual problem can occur if all the following conditions apply:

  OS X 10.7 or later version has been installed by the previous owner

  The boot volume has been encrypted with FileVault

  You start in recovery mode (that is, not of a 10.6 disk installation)

  In this case, you will not be able to unlock the volume or partition the drive without the FileVault password. Ask for advice or see this discussion of the CSA.

  d. after partitioning, quit disk utility and run the OS X Installer. If you install a version of OS X was acquired from the App Store, you will need the Apple ID and password you used. When the installation is complete, the system reboots automatically in the Migration Wizard, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have all the data to be transferred, it is usually the best time to do it.

  e. run the software update and install all available Apple system updates. To upgrade to a major version of Mac OS X newer than 10.6, get it from the Mac App Store. Note that you can not keep an improved version that was installed by the first owner. He or she cannot legally transfer to you, and without the Apple ID, you will be able to update in a software update or reinstall, if it becomes necessary. Is the same for all App Store products that the previous owner installed, you will need to buy.

  4. other issues

  a. If the original owner "accepted" bundled iLife (iPhoto, iMovie and Garage Band) applications in the App Store so that he or she could put up-to-date, IRREVOCABLY linked to that Apple ID and you can download them without having to buy them. Reportedly, the Mac App Store Customer Service sometimes issued codes of reimbursement for these applications to second owners who asked.

  (b) if the previous owner has not Deauthorize the computer in the iTunes Store under his Apple ID, you will not be able to authorize immediately under your username. In this case, you will have either to wait up to 90 days or contact iTunes Support.

  c. When you try to create a new iCloud account, you could get a failure message: "Account limit reached." Apple imposes a limit of life of three configurations by device iCloud account. Erasure of the unit does not reset the limit. You can always use iCloud account that was created on another device, but you will not be able to create a new. Contact iCloud Support for more information. Configuration limit does not apply to the Apple ID accounts used for other services, such as iTunes and Mac App Store or iMessage. You can create as many accounts you want.

• How to PhotoshopElements.exe not always asking for my country? IM always Switzerland and why there reqouest this still?

  I just want to see photoshop elements version 12 13, it do not need to run any application.

  now, he always asks the country of Switzerland by default, but why?

  still, I need Switzerland to run click!

  Why this problem?

  inside

  C:\ProgramData\Adobe

  Elements Organizer

  do not exist!

  There are:

  Photoshop Elements

  inside of this exist:

  12.0

  and

  13.0

  inside 13.o exist:

  Regional settings

  and

  OLS

  and

  Photo Creations

  and

  Pictures miniature creations

  and file:

  ThumbDatabase.db3

  How do now?

• My SMTP server Govind always ask for a password when I send the mail, why?

  I receive email fine. But when I try to send an email on the Server SMTP Out going for a password. I put a password when I change the configuration server. But it still for a password for each outgoing mail. This problem, I first noticed around Nov 17 14. It was just after a few dates for Thunderbird.
  I NEED HELP PLEASE, WHAT IS THE SOLUTION TO THIS PROBLEM?

  Next time it asks for a password:

  • Enter the password
  • Select the check box to "use Password Manager to remember the password."
  • Then click OK

• Always ask for help.

  I have asked for help but received none. I have an e machines T6520 in and all of a suddenn I have no audio device. I have no idea where it went and how to get it back. I went to the website of machines e and downloaded audion drivers, then I extracted the file now what I'm doing and that will fix it? Please please some can help me.

  Go here:

  http://support.gateway.com/us/en/EMAC/product/default.aspx?tab=1&modelId=1645

  Download the file and save it to your hard drive.

  Make a new folder somewhere and unzip him compressed file you donwloaded inside.

  Double-click setup.exe to install. Follow the instructions on the screen.

  See you soon,.

  Jerry

• Windows Vista Ultimate Edition asking for Activation

  I also have problems with Windows Vista Untimate. The system keeps asking me to add an activation code, but I use my own software Windows Vista Ultimate Disc. I suspect that I my not having all multimedia software to update or something because of this - Windows me does not update some items. Don't forget-

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  * original title - his DVD... DVD is great, the sound is fine with sites web and other audio services, but the sound is not available with the dvd. I need this function by tomorrow morning... distant help. *

  Hi James Shields.

  ·        What is the exact error code that you receive for activation?

  ·        Have you activated your Windows version?

  ·        You have the product key provided with the installation disc?

  ·        Is the final copy of windows has the sale retail or OEM copy?

  ·        What is the application you're using to play the DVD?

  Try the steps listed in the link for cause of activation below: error message when you start Windows Vista: "your activation period has expired": http://support.microsoft.com/kb/925616

  To the question related to your audio on DVD:

  1. If you use Windows Media player to play the DVD, and then try to use another application and check if the result is the same.

  2 install the latest Codec, you can check out the link below: Codecs: frequently asked questions:http://windows.microsoft.com/en-US/windows-vista/Codecs-frequently-asked-questions

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows still ask for activation after that laptop was RMA would be

  My laptop has been recently would be RMA and they replaced the motherboard, keyboard and VGA card. Shortly after receiving this return, Windows began to ask for an activation code. Unfortunately, I didn't write mine down, and the sticker is now faded and illegible. I sent my new laptop because that's what the OEM has asked that I do and they replaced my HARD drive and installed Vista fresh. It does not solve the problem at all.

  Without my original activation code, I don't think I can reactivate Windows. Is there anyway to recover my product key or how to contact Microsoft to get a new one? Because it seems that through my OEM drives me nowhere as they want me to RMA again.

  If your Vista operating system was running, and enabled, we could have helped you recover your product key.
  Unfortunately, this does not apply.

  I'm sorry, but we cannot help you, you don't have a legible label on your laptop...

  It is the responsibility of the OEM to support you.

  See you soon.

  Mick Murphy - Microsoft partner

• Asking for activation Vista pre-installed

  Hello

  I had the PC I currently own about 5 years and never had a problem. Recently, I did a system restore for all clean and make all smooth again. However since that day my copy of Windows application activation.

  Now, it is my understanding that a pre-installed copy is automatically activated, but he says: I'm without a permit at the moment.
  I don't know what to do or how to fix and I prefer does not risk to make another system restore and end up not being able to download updates or a PC totally locked.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone
  1. open Windows Activation by clicking the Start button, right-click computer, clicking Properties, and then clicking

  Activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com