even if the margins and clear the values defined divs, overlaping

Similar Questions

• In the design of the text alignment jumps around, even when the value "align top".

  Hi all

  I worked in a pamphlet that someone else created, and I have a problem with the text boxes. No matter what I set the alignment (align the top, in this case), it jumps around whenever I move the text box. For example, I try to move the box to the top, and the text inside it moves down. I move the box to the top, "centered" the text becomes. In fact, when he arrives at the margin, he's going above it all. The text inside the box is located just to the right of the margin, even though the box itself moves upward. The principal is also greater than it should be. When I take the text box on the page completely and put it next to the document, the leader returns to normal and it is aligned to the top.

  Clues?

  Thank you
  Trina

  Your text is set to "Snap to grid".

• How can we access the value defined for the attribute search criteria

  Hi guys,.

  Is it possible to access the value that has been set to attribute programmatically in the bean in support of a search term?

  Kind regards!

  Schuhler

  Check the sample 85 ADF code corner sampleshttp://www.oracle.com/technetwork/developer-tools/adf/learnmore/85-querycomponent-fieldvalidation-427197.pdf

  Frank shows how to access the variables.

  Timo

• HP pavilion x 360-11-n011si: BIOS does not boot form USB key to CD USB even when the value of UEFI to allow

  Hi all

  I have a laptop beatsaudio that has been upgraded to win10: the HARD drive failed and I replaced it with an SSD.

  The BIOS does not allow to boot from USB USB even when CD install to UEFI key.

  Any help will be appreciated

  Hello

  I realized a work around:

  Secure boot off

  Legacy support on

  and here's the big one

  Boot HDD in legacy should be last on the list

  The BIOS does not recognize that there is no. OS installed and continue to the next boot device as any other bios hp good done, it just stops putting so he can finally boot USB.

  Thank you

• USB key is always write protected even if the value is zero

  WHEN READ VALUE IS SET TO ZERO PENDRIVE NOT REMOVED THE WRITE PROTECTION

  Hello

  1. Are you having the same problem, if you connect the USB to different computer?
  2. Are you having the same problem if you connect different USB key to your computer?
  3. What is the brand and model of the pen driver?
  4. Have you tried making the virus for USB scan?

  Write protection is a feature found on many different types of media. When the write protection is turned on, you will be able to view the information on the disc or USB key, but you won't be able to write or transfer information to it.

  Write protection is an element of protection which prevents accidental deletion of important data. Sometimes turning off the write protection is as simple as uncapping the USB key to find a manual switch. If your player lacks an external switch, the procedure requires a few steps to complete.

  (a) turn on your computer and plug the drive after that your operating system is loaded.

  (b) open 'My computer' and the list of readers of research until you find your USB drive letter

  (c) right click on the name, then click 'properties '. Browse the tabs until you see the option to remove the write protection. If this does not work, proceed to the next step.

  (d) visit the website of the company for your USB key. Go to the help or support section and search for "write protect".

  (e) search the Internet for software that will remove the write protection. Download the program and install it on your computer.

  (f) open the software. Follow the instructions to remove your USB write protection.

  I also suggest you analyze your USB key with the Microsoft Safety Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  
  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

• Aspire V 15 Nitro sound very low even when the value to 100%. Does anyone have a solution?

  Dear community,

  I tried clicking on the sound icon.

  By selecting "playback devices".

  Clicking Tealtek High Definition Audio, and then click Properties.

  In "Improvements" all I have is a box unchecked to "disable sound effects everything" and nothing else. so, I can't find anything to change.

  When audio is playing on the icon settings sound is 100%, but the green bar is only part of the lower part of the bar.

  The sound was working fine last week. I don't know what I may have accidentally made.

  I would like suggestions or ideas.

  Thanks D.

  Dear IronFly,

  Thanks for all your suggestions. I just found out what caused the problem. A recent update for the onboard sound of Acer apparently gave it priority over Nvidia. To give priority to Nvidia and then by restarting the computer, its a was restored in all its splendour. If all goes well, this solution can help people who have lucky on a similar problem.

• Windows Media Center Scheduler service is not running, even when the value of autostart

  I had some trouble recently getting Windows Media Center to record programs. I did some research and found that Windows Media Center (ehSched) Scheduler Service does not start when I start my computer.
  It IS configured to start automatically.
  When I found that the service has not been started, I have manually started, but would find it himself quit again a few minutes later.
  It of very frustrating and resulted in missing the scheduled recordings.
  The only way to save that program is open the WMC and actually watching the program for the duration of the scheduled recording. (Not good if I'm not home!)

  I am running Windows 7 32 bit SP1 on a laptop of Toshiba Satellite A500.

  Help, please!

  Hi the Flomsat,

  I would say looking at the following thread because it's a question similar to yours:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-Media-Center-no-receiver-or-Scheduler/ed3672f4-7a17-419B-833A-df02fdf2af24

  I tried all the solutions on this thread. None was able to solve my problem.

  However, I found a fix that MAY have worked (it's only 1 day but so far it looks promising).

  Open Windows Media Center,

  Click on settings-> General-> optimization-> uncheck to "perform an optimization. I never noticed an increase in performance and reliability with it turns out, in fact, now that I think about it, when I turned it on, my Scheduler service started having these problems. It must be able to close the Scheduler to 'optimize '...

  UPDATE *.
  It did NOT work

  I had to reinstall windows to get it working again :(

• mode - the values defined in the balancing vSwitch batch file

  Hi gurus.

  I need to change to a long list of hosts of fashion for a new value for the instance "route based on the original port code" vSwitch load balancing.

  And as I'm a lazy VMware admin, I want to batch

  Someone has a tip for me?

  THX,

  Didier

  Hey Buddy,

  This is the command:

  vmware-vim-cmd /hostsvc/net/vswitch_setpolicy -nicteaming-policy=loadbalance_srcid vSwitchX

• Move the dialog box - start with the values defined at the current position?

  My apologies in advance if this is a stupid question.

  With a selected object and the active selection tool, I press return to get the dialog box move.

  For some reason, it seems random values entered in the horizontal and vertical fields. Instead, I just want the boxes to always start at 0 so that I can decide where the action, instead of having to manually delete these fields.

  Can someone put me straight on how to get that box to behave as I want what it?

  The numbers in the boxes are not random. They are the last move used values. They are kept to be used if you use a Cmd (Ctrl) d, the shortcut to repeat last transformation.

• Some images are centered, but others do not, even using the same tag div

  I have a background image that does evolve upward and down to match the size of the browser, but I can't keep centered content. I have an image of the logo, below which is a container of text and below that is another image. The text container remains focused, but not the images - they move to the left, but with different proportions.

  www.ShredSkins.com

  Fair warning: the code corresponding to the index page and style sheet is really mixed up. I tried a lot of different things with different names (so I can easily go back to a previous combination) and when I get home from work index I can remove everything and do it cleanly.

  Thank you!

  Add this to your CSS code.

  IMG {max-width: 100 %}}

  Then, remove all the attributes height and width HTML of your tags.

  This will result in images that resize available.

  Nancy O.

• OfficeJet 6500 e709: prints w / scale on the left margin and does not print right side of the page

  Prints with a wide margin and does not print the last 2 "or 3" on the right side of the page. This occurs even when the value of the left margin to little or none.

  HP trouble shoot said there is nothing wrong and test page prints fine.  Then back to the problem so try to print.

  HI @philg2,

  I see your thoughts produce a wide margin left and right of the page is cut off. What program are you printing from, and this occurs when you print from all programs or just a particular program?

  I see your post that this is not happening when you print a test page, so I think the problem is somehow related to the driver or program that you use. Let's start with the HP print and Scan Doctor is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  Thanks, I look forward to hearing back on your part.

• Detect the change of the value in While loop

  Hello

  I recently took a code example in examples of using Labview and I'm putting the analog output through my data acquisition card 4461 pxi. I want to have a continuous waveform, but being able to change the volume and the waveform will adjust automatically and be issued through the card.

  In the code, I have everything first to open a .wav file and write it. While playing continuously through the while loop, but I want the signal to change automatically when the volume is changed. I know that I should probably use a structure of the event but the while loop, I use to play the signal will never stop unless the user presses stop so it would play permanently in a structure of the event even when the value changes (I tried).

  So now I try to see if there is a way to make my time stop loop when the volume value.

  You must correct the issues (forget the events if you are not sure of them):

  1. If wire you the digital volume to the wall of the while structure, then the whole in structure only tell that one value that happens on the node and will not read new values.

  2. to read the new values, move the Volume Terminal inside any building (which will shock your other code that depends on it), or use a local Variable inside any node.

  3. to check if the value has changed, you must compare the value to the previous value. To do this, use a shift on the while loop register to store the previous value and then compare it to the new value with the function "not equal?". Wire the Boolean result of this to the conditional Terminal.

  A better way for you might be to wrap the multiplication and Analog Write function into the while loop so that you're constantly replaying the waveform and it's continuously being re-scaled by the volume value. This will mean your volume control is being continuously polled (once per waveform playback) and used to scale the waveform each time. You'll need to figure out how to stop, send and play the waveform once per iteration of the while loop by bringing the Stop VI inside too. 
  

• Extract the value of the ring of text created by program

  Hello

  I have a spreadsheet I need to extract a single line. The first column of the worksheet has non-espacees values of time and feed these time values in a property node that is introduced in the Strings [] of a ringtone text indicator property node. The purpose of this is because I want the user to select only time for which the data were collected and, ideally, the zero point of time in the list corresponds to the zero line.

  However, when the user selects an element of the ring of text, the control passes the chain selected and not the associated value, despite the use of the "Value" property node You have any idea why this is happening? I know I could use the table 1 d of research VI to solve this problem, but I'm more interested in why it does not work. I have attached a few example data as well as the VI in question for reference. Thank you very much for your help!

  EDIT: It seems that this can explained by the fact the string, I am animals in the field [] of strings are numbers. When I did, I swapped the hours with random text strings, it works beautifully. Curious and curious...

  Jeff and Nathand,

  Thank you both for your responses. In fact, I was just able to solve the problem on mine in Exchange for the VI of subset of table with the Index of table VI. It works perfectly now, even with the values not assigned (even if it's an excellent suggestion, Jeff). Nathand, in which your question, select the indicator that I had attached to the control time no was not to display the value (0,1,2...) than I expected but the character string chosen itself, (-800,-750...) which confused me into thinking that something was wrong. I have attached the fixed VI for reference.

• MAF defining your inputvalue links on the value of your pageFlowScope

  Hello

  Im having a questions regarding the value from pageFlowScope on routes of entry value based on setPropertyListener. For example, on a list of the Department, the listitem of departments has been set a listener of the property:

  < amx:listItem id = "li1" action = "queryEmployees" >

  < amx:outputText value = "#{row.departmentName}" id = "ot2" / > "

  "< amx:setPropertyListener id = from =" #{row.departmentId "spl1"} "to =" #{pageFlowScope.departmentIdVal} "type ="action"/ >

  < / amx:listItem >

  I have no problem of recovery of the pageFlowScope.departmentIdVal to the bindings.departmentId.inputValue (so that the user would not be able to insert the departmentId as the departmentId has been prefixed from the selected category as shown):

  "< amx:inputText value =" #{pageFlowScope.departmentIdVal} "label =" #{bindings.employeeId.hints.label} "id = 'it8' >

  < amx:convertNumber groupingUsed = "false" id = "cn4" / >

  < / amx:inputText >

  So, here is the problem, the value of this #{pageFlowScope.departmentIdVal} seems to be allocated as appropriate during the insert operation. (Even the value is seems to be visible on the user interface, but it does not take the value of the binding attribute). At the end of the insert operation, the special binding attributes of departmentId is seems to be Null. Am I on the right track or a little off?

  Thanks in advance,

  Learner90

  Cool

  I answer to my own problem, its ok however. He spent two days at figured this out. Once the value is viewable on the textfield of entry based on the listener property of the list of the Department id for the line item, for example:

  On the list view page, the value of the id of service line is stored on the temporary memory using this setpropertylistener.

  fetchSize = "#{bindings.allDepartments.rangeSize} '"

  selectedRowKeys = "#{bindings.allDepartments.collectionModel.selectedRow} '"

  initialScrollRowKeys = "#{bindings.allDepartments.collectionModel.selectedRow} '"

  selectionListener = "#{bindings.allDepartments.collectionModel.makeCurrent} '"

  showMoreStrategy = 'autoScroll' bufferStrategy = 'viewport' id = "lv1" >

  to = "#{pageFlowScope.departmentIdVal}" / >

  On the Page Add, the value of the selected department departmentId is set to inputText attributes (get the value of temporary storage) that is dragged and fall on the amx control data page. By not allowing the user to enter any value on the inputtext, the form is set to readonly (true).

  " value =" #{pageFlowScope.departmentIdVal} " label =" #{bindings.departmentId.hints.label} ".

  ID = "9" readOnly = "true" >

  Now, to solve problems, even if the value of attributes appears on the inputtext field, the value is not owned by the departmentId attributes("#{bindings.departmentId.inputValue}") links. Therefore, we will have to just move this value on the attributes link insertion (save or insert button) by an another defined propertylistener as shown below:

  Disabled = "#{!}" Bindings.insertEmployee.Enabled}"id ="cb2 ".

  rendered = "#{pageFlowScope.actionSelected =="add"}" action = "browseEmployee" > "

  to="#{bindings.departmentId.inputValue}"/ >

  Examples of simple application similar to below. See you soon

  

  Kind regards

  Learner90

• Conditional processing of JavaScript by using the value of the item page

  Dear experts,
  
  I have the following code to draw a Gantt chart and need to package some steps. They should only appears if the date values are not null or not zero.
  
  I tried the following, as you can see in my code. However, the first line is always printed even if the value of my article on page P1112_GP_AUFTAKT_START is null or zero (display value).
  
  Can you please give me a hint how to do conditional processing in my case?
  
  I appreciate your help!
  
  Thank you very much
  
  SEB
  

  <script>
    var g = new JSGantt.GanttChart('g',document.getElementById('GanttChartDIV'), 'day');
    g.setShowRes(0); // Show/Hide Responsible (0/1)
    g.setShowDur(1); // Show/Hide Duration (0/1)
    g.setShowComp(1); // Show/Hide % Complete(0/1)
    g.setCaptionType('Caption');  // Set to Show Caption
    g.setShowStartDate(1); // Show/Hide Start Date(0/1)
    g.setShowEndDate(1); // Show/Hide End Date(0/1)
    g.setDateInputFormat('dd/mm/yyyy') 
    g.setDateDisplayFormat('dd/mm/yyyy') 
  
    if( g ) {
      if ($x('P1112_GP_AUFTAKT_START').value != null || $x('P1112_GP_AUFTAKT_END').value != null || $x('P1112_GP_AUFTAKT_START').value != 0 || $x('P1112_GP_AUFTAKT_END').value != 0 || $x('P1112_GP_AUFTAKT_START').value != ""  || $x('P1112_GP_AUFTAKT_END').value != "")
     
         {g.AddTaskItem(new JSGantt.TaskItem(1, 'Auftaktveranstaltung'    ,  $x('P1112_GP_AUFTAKT_START').value , $x('P1112_GP_AUFTAKT_END').value    ,  'fff600', '', 0, 'LWF',  100, 0, 0, 1));}
       
       g.AddTaskItem(new JSGantt.TaskItem(2, 'Kartierung LRT Flachland', $x('P1112_KART_LRT_START').value  , $x('P1112_KART_LRT_END').value  ,  '00a3ff', '', 0, 'LWF',  20, 0, 0, 1, "1"));
       g.AddTaskItem(new JSGantt.TaskItem(3, 'Inventur LRT Flachland'  , $x('P1112_INV_LRT_START').value , $x('P1112_INV_LRT_END').value ,  'ff6347', '', 0, 'LWF',  30, 0, 0, 1, "1"));
  
      g.Draw();     
      g.DrawDependencies();
  
  
    }
    else
    {
      alert("not defined");
    }
  
  </script>

  Hello

  Try

  if($v('P1112_GP_AUFTAKT_START').length>0 ||
   $v('P1112_GP_AUFTAKT_END').length>0   ||
   $v('P1112_GP_AUFTAKT_START')*1 != 0 ||
   $v('P1112_GP_AUFTAKT_END')*1 != 0 ||
  ){
  /* your code */
  }
  

  Kind regards
  Jari