Event.currentTarget - empty?

Similar Questions

• Static vs dynamic events - dynamic events are empty

  During the implementation of my project, I used static events to manage the interface. The Structures of the event separated while loops in the same vi.

  I changed the architecture to make code modular and I use dynamic events. Dynamic events are captured in separate subVIs event Structures. I spend the references to the controls in the subVIs that have Structures of the event and I record the events of the references.

  Static events had no problem.

  With the dynamic events, I see that some events are not consumed. Instead, I see the event inspector window a few times an event is 'empty '. This means that the button should be pressed again.

  I am attaching two examples of projects that have exactly the same functionality.

  The testDemo2 uses dynamic events.

  The testDemo4 uses static events.

  How much detail I miss the dynamic architecture events leading to lose some events?

  This UI code is crizazy. It is difficult to really say what is happening, but you have a Unregister for events VI after the structure of your event to during each single loop and then re-register at the beginning of each loop. Empty all dynamic events currently in the queue and then re-registered again.

  You must only register events, only once and cancel the registration at the end of the application.

  What you do isn't really very modular. Even if you add a new event/control, you still he wire through the Subvi references and register, so you're not really save any time. There is nothing wrong with having a static event for your UI record. What you want probably is an architecture of messages in queue manager, where your static user interface events create messages that are sent to a loop of consumer to manage.

• How to get event.target/event.currentTarget for HTML 5 canvas for Manager click

  Hello

  I hope that everyone else is doing great.

  I belong to bottom Actionscript and just started on CC Flash HTML 5 Canvas.

  How to get event.target and event.currentTarget in CC Flash for HTML 5 canvas for the click event.
  As we used to do an ACE 3.0
  

  btn.addEventListener (MouseEvent.CLICK, GB);
  

  function GB (evt:MouseEvent) {}
  

  trace ("evt-" + evt.currentTarget); It will let us know the selected target
  }
  

  For HTML-5
  
  

  btn.addEventListener ('click', go.bind (this));
  

  function GB (evt) {}
  

  Console.log ("evt-" + evt.? t); What is the correct syntax here?
  

  }

  
  

  Thank you

  
  

  Hey guys found the answer to stackoverflow

  It's - evt.target

• Event.currentTarget.visible = false true back

  Hi, I have a delicate issue, I ' m make a game involving learning activities. In this one, I have to push the letters on a screen and compose a Word. Whenever you click on a letter he sets its State to false, so you can't click on it again. Just as worked so far, but right now I do not know how the value visible return letters I clicked on.

  Basically, I have to do, for example, if you make a mistake in selecting the letters you want to make the word. I managed to create a button Delete, you can press on, so the letter will pop out of the textfield, but how do I set the button or the letter to visible?

  I tried to push the clickedLetters into a table, but they can become so visible channels = true does not work. Any help?

  Thank you

  private function takeTheLetter(Event:MouseEvent):void
          {
              var letterTraced:String = Event.currentTarget.letter.text.charAt(0);
              clickedLettersArray.push(letterTraced);
              //show the letters that are typed;
              var composeWord:String = clickedLettersArray.toString();
              composeWord = composeWord.split(",").join("");
              hero_txt.text = composeWord;
              //remove the pressed letter
              Event.currentTarget.visible = false;
  
              currentTargetArray.push(letterTraced);
              trace(currentTargetArray);
          }
  
  private function deleteTheLetter(Event:MouseEvent):void
          {
              clickedLettersArray.pop();
              //set the array back to a string;
              var correctedWord:String = clickedLettersArray.join(",");
              //set the true sprite to compare
              correctedWord = correctedWord.split(",").join("");
              hero_txt.text = correctedWord;
          }
  

  private void deleteTheLetter(evt:MouseEvent):void

  {

  clickedLettersArray.pop ();

  define the array to a string;

  var correctedWord:String = clickedLettersArray.join(",");

  the true sprite to compare the value

  correctedWord = correctedWord.split(",").join("");

  hero_txt. Text = correctedWord;

  currentTargetArray [currentTargetArray.length - 1] .visible = true;

  currentTargetArray.pop ();

  }

  IT IS THE RIGHT CODE, IF SOMEONE NEEDS.

• Pass event.currentTarget to function

  Hello

  I make a flash game tile and I need to spend event.currentTarget (the current mosaic) in a new function that returns the tile to its starting position.

  Example: -.

  function returnTile(event:Event) {}

  event.currentTarget.x = event.currentTarget.origin.x;
  event.currentTarget.y = event.currentTarget.origin.y;
  event.currentTarget.origin.occupied = true;
  
  event.currentTarget.addEventListener (MouseEvent.MOUSE_DOWN, tileMouseDown);
  event.currentTarget.addEventListener (MouseEvent.MOUSE_UP, tileMouseUp);
  event.currentTarget.mouseEnabled = true;
  event.currentTarget.buttonMode = true;

  }

  Is this possible? I need to call this function in other locations in my code...

  I tried passing the object itself to another function as a variable, but he loses his starting position information!

  Help, please!

  You should be able to pass the object itself, without him losing any of its properties.

• Cannot connect to the 'Available' office says event DB empty pool.

  I have a test pool configured with a single available desktop computer in it. This is to test the transition for users of 14/14.

  I am able to connect to the desktop very well with a single user, how I log out of the desktop computer and disconnect the client from the view. When I reconnect the VCS, I connect under a different name, but cannot start desktop for this pool.

  The client displays - "this destkop currently has no source of funds available...". ». When I check the DB of the event for the pool, I see the failed attempts and the error indicates that the pool is empty. However, looking at the pool, the desktop shows available.

  I tried to contact VMWare, but Tech Support led me to pre-sales and pre-sales had no idea what I was talking about.

  If you assign the user to a desktop computer that still looks like a pool of dedicated linked automatic cloning.   A floating pool is what you're after which means that each virtual machine is available for use by anyone who connects.

• Create/remove the container following the event full/empty container

  Mr President.

  I'm creating a simple editor. now, I want to create a new container each previous time container is full with text and/or images. I also want to delete if it is empty. Can you help me event that will be useful to make these two

  Thank you

  Hello Raja

  You must do the following

  Add

  If (textFlow.flowComposer.getControllerAt(textFlow.flowComposer.numControllers-1).calculateH eight() > textFlow.flowComposer.getControllerAt(textFlow.flowComposer.numControllers-1).comp ositionHeight) {}

  create the next controller

  }

  To remove

  {If (textFlow.flowComposer.getControllerAt(textFlow.flowComposer.numControllers-1).calculateH {eight () == 0)}

  remove the last empty container
  }

• Problem sending looping event. CurrentTarget to the starting position

  Hello

  I have a problem with an if/else statement in a function that checks to see what "drop zone" for align one of the ten items should on... the problem is that I can put only the startup location of each item to work on the first hitTest, otherwise after clicking on another element or any element of positioning in one of the drop areas , the drop zone becomes it is place of departure due to startDrag() and stopDrag() was recalled to move the object...

  What I tried to do here is to create a variable (which back the correct movieclip reference (currentTargetHome), but as a string), but it does not work when I try to access its attributes by using [currentTargetHome]. The item exist in the movieclip 'gamePage' and the rest of the work of service!

  Any ideas would be appreciated thanks in advance...

  function persoMouseUp(event:MouseEvent):void {var homeHitArray:Array = [gamePage.a1b, gamePage.a2b, gamePage.a3b, gamePage.a4b, gamePage.a5b];                         event.currentTarget.stopDrag ();             var currentTargetHome:String = "gamePage." + event.currentTarget.name + "b";             var currentHome:DisplayObject = getChildByName (currentTargetHome);                         gamePage.h2.visible = false;             gamePage.h3.visible = false;             gamePage.h4.visible = false;                         for (var i: Number = 0; i < homeHitArray.length; i ++) {if (event.currentTarget.hitTestObject (homeHitArray [i])) {event.currentTarget.x = .x (homeHitArray [i]);}}                         event.currentTarget.y = there (homeHitArray [i]);                     } else if (event.currentTarget.hitTestObject (gamePage.h2)) {event.currentTarget.x = gamePage.h2.x;}                         event.currentTarget.y = gamePage.h2.y;                     } else if (event.currentTarget.hitTestObject (gamePage.h3)) {event.currentTarget.x = gamePage.h3.x;}                         event.currentTarget.y = gamePage.h3.y;                     } else if (event.currentTarget.hitTestObject (gamePage.h4)) {event.currentTarget.x = gamePage.h4.x;}                         event.currentTarget.y = gamePage.h4.y;                     } else {event.currentTarget.x = [currentTargetHome] .x;}                         event.currentTarget.y = [currentTargetHome] there;                         trace (currentTargetHome);                     }             }      }

  I can't say I followed the description of the problem and cannot return to it here since the own detachment of the code is what I look at you now, but in your code, I see you are using...

  var currentTargetHome:String = "gamePage." + event.currentTarget.name + "b";

  This will not work if the intention is to target an object which lives inside gamePage.  Build the "." in the chain does not work when the application of the support rating.  You will need to have every object separated, as in... This ["gamePage"] [Event.currentTarget.Name + "b"].  If you can use something like...

  var currentTargetHome:String = event.currentTarget.name + "b";

  and then later use...

  event.currentTarget.x = gamePage [currentTargetHome] .x;

  Now, which will align the event.currentTarget to the currrentTargetHome if the event.currentTarget is also inside gamePage.

• Is there a way to tell when the bin was emptied last?

  Is there a way to tell when the bin was emptied last?

  Open a new Finder window. The display in the FInder menu, select Customize toolbar... Drag / move the icon to get information from the right toolbar on the left of the existing action button. Click done in the personalization Control Panel and close the window of the Finder. This Get Info button will also be useful for selections of files.

  

  OS X does not connect to an event to empty the trash. You can click on the trash icon in your Dock, and if the Recycle Bin has been emptied recently, you'll be watching an empty Finder window. Now, you can click on this button to obtain information about the toolbar, and the displayed change date will be when the Recycle Bin has been emptied. If you add more items to the trash, this date modifed will be when the last element has been added.

  

• structure of the event copy

  Hello

  I use LV DSC RT 8.2.1

  Why can't I copy & paste a structure of the event and its description of the events (in the same VI)?

  (I can create a copy of a structure of the event, but his description of the events are empty)

  Is it possible to do?

  Amitai Abramson.

  You can attach an example?

  I can copy & paste an event very well structure. Same ctrl + do drag retains all events intact.

• NFC - interception unsupported Tags Event - UID reading only

  Hi, I worked on a few ideas of NFC where I find that I am running in unsupported tags.  Like the classic Mifare 1 K

  (NTAG06)

  Ideally I need only UID of these and I can move forward.  My understanding is that it is ultimately in the negotiation of the initial Protocol of LLCP?

  I read a lot of great posts on NFC with waterfalls, which led me to see that I need to the native library of the nfc to reach probably catch the event.

  My main question is how / where I hang for the event "tag empty or not supported"?

  My goal is to save my application for the event of invocation, but the record seems to imply that the MIME type will be together...

  Can anyone provide a reference for the serial number of an unsupported tag before trying to treat a NDEF or knowledge Mime?

  THX

  Neil

  OK I figured it (this always happens after I post...)

  OK the place to get the UID to any Mifare Classic 1 K can be demonstrated in the application of the NFC tool when you sign up for a reading for 14443 (example of the GVB transport card)

  There is a check it for variants...

  In the "else" of the audit of the variant, you can just run displayTagInformation (target, false);

  This will then display it...

  The direct method is the snage it the nfc_event for the 14443 scan using (nfc_get_tag_id) and pass the appropriate parameters to fill a table/buffer ID.

  The NDEF is Mifare classic mistake - but if you write a cloud apps like me then a UID is all that is necessary.

  Neil

• Action when mc is empty

  Hello

  I have 4 breast clip objects each with code on it is the 2nd Framework tile.visible = false; To refer to this 2 frame in the main timeline, I have "cont.tile1.addEventListener (MouseEvent.CLICK, fr2); function fr2(event:MouseEvent):void {tile1.gotoAndStop (2) ;}} ' This code 1 time for every tile (renamed). Objects (tiles) are inside mc called "cont." Once they are all clicked and are invisible, I need to take measures, as for example go to frame 5 on the main timeline. How can I make that possible? Thank you.

  Keep track of how much you click in the main timeline and everything a click just issue the command.

  You can use a function instead of a function for each tile...

  var clickedCount:int = 0;

  function f(event:MouseEvent):void {}

  MovieClip (event.currentTarget) .gotoAndStop (2);

  clickedCount ++;

  if(clickedCount == 4) {}

  gotoAndStop (5);

  }

  }

• Mobile gesture Event - Pan Event (Problem)

  AS3-mobile

  I want to move my photo with one only finger not two fingers.
  coding be provided with multitouch feature to work but I need to move with one finger.

  Any solution for this. Need help.

  coding:

  Multitouch.inputMode = MultitouchInputMode.GESTURE;

  Picture.addEventListener (TransformGestureEvent.GESTURE_PAN, fl_PanHandler_2);

  function fl_PanHandler_2(event:TransformGestureEvent):void

  {

  event.currentTarget.x += event.offsetX;

  event.currentTarget.y += event.offsetY;

  }

  Use a touchevent, not transformgestureevent.

• Event.Target confusion?

  I try to reuse the function using event.target, but after research and try different method online, I found event.target belongs to the most difficult to understand part...

  can someone explain to me what is the difference between (the example to the right indicating where I meet these code):

  1.event.target

  2.event.target.name

  3.event.currentTarget / / e.g. event.currentTarget.addChild (myMc);

  4.event.currentTarget.name / / e.g. var newswf:URLRequest = new URLRequest (event.target.name + ".swf");

  5 MovieClip (event.currentTarget) / / e.g. addChild (MovieClip (event.currentTarget));

  I consider that the main culprit for the compiler and whoever decided to dumb it upward.  If you try what suggest you and manually place circles on the scene, you will probably see the same mistake to shut up... even if the circle is a resource of the library which is defined as a symbol of the MovieClip that the compiler must be able to refer to.

• ActionScript 3 - several variables for event listener.

  OK, I have a question (of course this is the reason why I'm here).  I put emphasis on PHP a lot lately and just had a customer who requires an MP3 play several songs so I had to whip on my rusty actionscript skills.  I have the complete player and it does not work as you wish.  The downside is that there are several pieces.  I use separate functions for each song and separate event listeners.  My main question is there a way to combine these functions into one and just use the event listener to pass another variable to functions?  Here is a sample of one of the code for Song1.  I would like to do so anywhere there is Song1 in the code, I can make a variable so I can put for example (Song2, Song3, Song4, etc..)  In this way, I can have one or two functions to manage all the songs instead of having to copy, paste and then search and replace.

  Thanks for the help!

  // Song 1
  var Song1:Sound = new Sound();
  pbSong1.source = Song1;
  //pbSong1.visible = false;
  var Song1Loaded:Boolean = false;
  
  pbSong1.addEventListener(Event.COMPLETE, Song1LoadComplete);
  btnSong1Play.addEventListener(MouseEvent.CLICK, Song1Play);
  btnSong1Stop.addEventListener(MouseEvent.CLICK, Stop);
  
  function Song1Play(event:MouseEvent) {
       if (Song1Loaded == true) {
            sndchnlMain.stop();
            sndchnlMain = Song1.play();
       } else {
            pbSong1.visible = true;
            Song1.load(new URLRequest("media/music/Song1.mp3"));
       }
  }
  
  function Song1LoadComplete(event:Event) {
       trace("Size of file: " + Song1.bytesTotal);
       Song1.close();
       Song1Loaded = true;
       if(sndchnlMain) {
            sndchnlMain.stop();
       }
       sndchnlMain = Song1.play();
       pbSong1.visible = false;
  }
  

  You can code

  function SongPlay(event:MouseEvent) {var songNum:int = Number(event.currentTarget.name.split(btnSong).join("").split("Play").join(""));      if (SongLoaded) {  // use one booleanSongLoaded=false;           sndchn.stop();  // use one soundchannel
           sndchn = this["Song"+songNum].play();
       } else {
            pbSong1.visible = true;
            this["Song"+songNum].load(new URLRequest("media/music/Song"+soundNum+".mp3"));
       }
  }