Feedback: battery grip Canon

Similar Questions

• BG - E9 Battery Grip question

  Are all these battery grips made in Taiwan? I'd really like one made to the Japan and not Taiwan, but I have not ben able to find. Is anyone know about these handles?

  Thank you

  Not all Canon products are made in the Japan. My DSLR batteries from China. However, Canon QC is much better than the other third out there, so don't worry too much.

• Battery grip for a 60 d

  Who has experience with the off-brand for the 60 d battery grips?

  I have had three different cameras that used Canon grips - never had a problem.

  I did not personally possess a 3rd party grip.  From time to time, we get a post where someone has a problem with a camera that shows only if their 3rd party grip is attached to the camera (often should not even be powered on and in use... just have connected it can be enough) and the camera will start to behave strangely.  They remove the handle and it is back to normal.

  While I do not have a 3rd party grip, I suspect that these handles must work effectively for most users, because the large retailers like B & H and Adorama Photo sell and I doubt they sell them if they had a high rate of return.

  If you want to get a 3rd hold part anyway... just be aware that it can affect even the command buttons on the device if the handle is having a problem.  If you have a problem, remove the handle completely (not just power off) and re - test the camera.

• Question weird battery canon 60 d

  Hi, im as a canon 60 d and it came with a battery attached grip. I then bought a shoulder rig had to return the battery grip for the follow focus work. However, after the withdrawal of the battery grip and taking the batteries out of the handle and one of them put into the device (they are dot.foto lp - e6) custom of the camera even light up but if I put the grip battery back will be... im so confused. If it makes a difference, there is no door battery on the camera. If someone could help out me id happy.

  Thank you very much

  Matt

  You need the battery.

  There is a Microswitch operated by the door that turns the unit off completely, whenever the door is opened or removed. (Note: there is a similar Microswitch on door card memory, turns off the camera completely as soon as the door is open, also.)

  Most of the handles have a place to store the door when it is removed to fix the handle. It's a crack in the door creeps in, on one side of the "vertical" position on the handle that fits the camera. You might look to see if the battery cover is there.  Otherwise, I do not know how you will be able to use the camera without it (or the handle installed).

  ***********
  Alan Myers

  San Jose, California, USA.
  «Market softly and carry a great lens.»
  MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
  FLICKR & REPROGRAPHY

• Quick menu Canon stopped working [solved]

  Hello everyone... first time poster here with a new PIXMA MG3222 printer I just bought today and I'm having a problem.

  Whenever I try to launch the Quick Menu of Canon, I get a windows popup error message, "Quick Menu Canon stopped working. This has happened every time and the error message is immediate. A black box that indicates the Task Manager is the main window of the Quick Menu Canon is in the background, but nothing appears in it and said the Task Manager is not ongoing.

  I downloaded and reinstalled drivers 3 for my Win7 64 bit box from the Canon Site, as well as the most recent software Quick Menu but still the same error message. I opened my firewall to allow the Quick Menu Canon thinking that he may be trying to contact Canon for a reason, and that's why he was not but once again... always the same error message.

  The printer & scanner work fine, but of course I have to select each function separately from Windows Explorer in order to use, no quick Menu of the Canon, which is quite annoying.

  Someone at - it a similar problem they solved?

  Of event viewer...

  Application: CNQMMAIN. EXE
  
  Version of the Framework: v4.0.30319
  
  Description: The process was completed due to an unhandled exception.
  
  Exception info: System.AccessViolationException
  
  Battery:
  
     at Canon.QuickMenu.ManagedWrapper.Twain.Controller.GetFirstSource (Canon.QuickMenu.ManagedWrapper.Twain.TwIdentity ByRef)
  
     at Canon.QuickMenu.Main.InstallInformation.Driver.GetScannerDriverInfo (System.String, System.Windows.Window, System.Nullable'1,)
  
     to Canon.QuickMenu.Main.Scanner... ctor (System.String, System.Nullable'1, System.Windows.Window)
  
     at Canon.QuickMenu.Main.Scanner.GetScannerFromDeviceID (System.String, System.Nullable'1)
  
     at Canon.QuickMenu.Main.MasterSetup.FindInstalledDevice (System.String, out Boolean, System.DateTime)
  
     at Canon.QuickMenu.Main.App.ChangeDeviceSettingsOnCommalineInformation (Boolean, Canon.QuickMenu.Main.CommandLine.Information, out Boolean)
  
     at Canon.QuickMenu.Main.App.CommandLineInformationProcedure (Canon.QuickMenu.Main.CommandLine.Information, Boolean, Boolean)
  
     at Canon.QuickMenu.Main.App.OnStartup (System.Windows.StartupEventArgs)
  
     <.ctor>b__1 (System.Object)
  
     to System.Windows.Threading.ExceptionWrapper.InternalRealCall (System.Delegate, System.Object, Int32)
  
     to the millisecond. Internal.Threading.ExceptionFilterHelper.TryCatchWhen (System.Object, System.Object, System.Delegate, Int32, System.Delegate)
  
     at System.Windows.Threading.DispatcherOperation.InvokeImpl)
  
     at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext (System.Object)
  
     at System.Threading.ExecutionContext.RunInternal (System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
  
     at System.Threading.ExecutionContext.Run (System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
  
     at System.Threading.ExecutionContext.Run (System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
  
     at System.Windows.Threading.DispatcherOperation.Invoke)
  
     at System.Windows.Threading.Dispatcher.ProcessQueue)
  
     at System.Windows.Threading.Dispatcher.WndProcHook (IntPtr, Int32, IntPtr, IntPtr, out Boolean)
  
     to the millisecond. Win32.HwndWrapper.WndProc (IntPtr, Int32, IntPtr, IntPtr, out Boolean)
  
     to the millisecond. Win32.HwndSubclass.DispatcherCallbackOperation (System.Object)
  
     to System.Windows.Threading.ExceptionWrapper.InternalRealCall (System.Delegate, System.Object, Int32)
  
     to the millisecond. Internal.Threading.ExceptionFilterHelper.TryCatchWhen (System.Object, System.Object, System.Delegate, Int32, System.Delegate)
  
     at System.Windows.Threading.Dispatcher.LegacyInvokeImpl (System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
  
     to the millisecond. Win32.HwndSubclass.SubclassWndProc (IntPtr, Int32, IntPtr, IntPtr)
  
     to the millisecond. Win32.UnsafeNativeMethods.DispatchMessage (System.Windows.Interop.MSG ByRef)
  
     at System.Windows.Threading.Dispatcher.PushFrameImpl (System.Windows.Threading.DispatcherFrame)
  
     at System.Windows.Threading.Dispatcher.PushFrame (System.Windows.Threading.DispatcherFrame)
  
     at System.Windows.Threading.Dispatcher.Run)
  
     at System.Windows.Application.RunDispatcher (System.Object)

  
  to System.Windows.Application.RunInternal (System.Windows.Window)
  to System.Windows.Application.Run (System.Windows.Window)
  at Canon.QuickMenu.Main.App.Main)

  I solved this problem:

  Apparently, the Quick Menu of Canon was hung trying to initialize a driver Twain-32 No.-more-exisiting a previously uninstalled printer/scanner that left a file location... the file no longer existed, but a reference to this fact.

  Windows Event Viewer:

  Name of the failing application: CNQMMAIN. EXE, version: 2.3.0.0, time stamp: 0x51ee1f7b
  The failed module name: dlbktwds.ds, version: 3.107.0.0, time stamp: 0x45df4d5a
  Exception code: 0xc0000005
  Offset: 0x00004da2
  ID of the process failed: 0xfc0
  Start time of application vulnerabilities: 0x01cf3a786aa3ca3b
  The failing application path: C:\Program Files (x 86) \Canon\Quick Menu\CNQMMAIN. EXE
  Path of the failing module: C:\Windows\Twain_32\Dell\AIO printer A920\dlbktwds.ds
  Report ID: a881fcce-a66b-11e3-be08-1c6f65af0926

• EOS Rebel T3 battery problems

  Hello

  I had my camera maybe 8-9 months ago, and I tried to understand this battery problem since then. The original battery supplied with the camera hardly worked at all. I would like to load completely, and then it would take about 5 pictures and then caput. The camera told me to reload.

  I bought a new battery (battery official canon) and this one does a little better job. However, I have always charged between uses. I remove the battery from the device between uses, but whenever I have turn it back on again it could last 10 pictures before having to recharge. I even bought a new charger thinking that maybe it was the charger that was not working, but that has not helped the problem.

  So my question is: the batteries don't last long in general? Is it normal to have to recharge the battery after each use? This could be a problem with my camera I'll need to send it to be fixed?

  No, they do not get hot to the touch. In fact, if I plug it into the charger, the charger shows a green light full load after a few minutes.

  The camera will show a full charge for a minute and then turns off with the message "recharge" the next. After turning on the back, the battery indicator usually will show a full charge again.

  I am under the impression that the problem lies in the camera and have contacted support to try to resolve the problem. Thank you all for your help!

• BlackBerry Smartphones "timer" in the middle of the screen, battery drain, slow, etc...

  I've been running OS 6 (service pack 1879 was a leaked version) absolutely smoothly on my Bold 9700 for several months and in the last days my phone has simply becomes unnecessary.  (I'm on Orange UK)

  Need AAAAAGES nothing to do, the timer is always on the screen, it warms up and the battery lasts a few hours.  It started overheating yesterday and it is constantly "work" even when doing nothing.  It takes like 2 minutes to get the screen of my password and then another minute to typing to thre, etc. etc...

  I tried the things:

  clear the event log

  disabling memory compression

  battery grips

  removing applications, I use often (I only use Facebook and Facebook, both have feeds update 1 hour value or never)

  deletion of messages/music/photos

  updated desktop software and to return to a return to the top 2 weeks ago, when it worked fine

  Disabling the automatic connections 'hot spots' on the wifi...

  and nothing seems to fix... I'm ready to cry in frustration.

  I have never use flashing light or vibrate... I also pretty much only use BBM during my work day (no calls) and my battery normally lasts well over a day.

  This upward as there should be a few SLEEP update coming, but or desktop software or updated offfer wireless anything...

  Should I stay if I can't find an official release?

  or try to re - install OS6?

  Thank you...

  I figured out it's a memory leak...

  I've been using an unoffical OS6 for centuries, but the other night I downgraded to obtained OS5 OS6 official UK Blackberry out and re-installed and it works like a dream.

• 5 accessories 5 d Mk II is not compatible with the 5 d Mk III

  I have a 5 d Mk II and a beautiful collection of lenses and accessories.  I'm upgrading to a Mk III.  Can someone tell me what (if any) targets and accessories are not compatible with the Mk III?  Thank you!

  FBurr wrote:

  Thank you.  Someone once told me the grip was not compatible, and I was concerned about my L-bracket for tripod work (that I can test in the store).  I just wanted to check.  Thanks again!

  I'm sure that both cameras use different battery handles.  Remember, brackets are usually designed to hold the Canon battery grips, not 3rd party, handles that must be slightly different form of Canon.

• How to register for warranty purches accessories

  I received a few accecories for my rebellious T31 for Christmas, but can not find the place where them register for warranty purposes. Don't get me wrong, I found the registration on the website of Canon, but these accessories do not seem to appear anywhere in this section.

  They are:

  Canon battery Grip BG - E8

  Canon RC - 6 remote control

  Canon EP-EX15II eyepiece Extender

  Thank you for any advice and Merry Christmas!

  It is not technically 'necessary' you 'save' something for the guarantee as long as you have some sort of proof of purchase.

  I noticed that Canon only seems to have choices for registration for their largest components (camera body... leneses... etc) but not minor components.

• That's enough

  I must say that I was more than paticent with this device. I'm tired of the reliculous answers and want just the truth. I'm tired of something that I pay a large amount each month for the service and the price of the phone and I can't use it for what it is advertised to. I'm tired of not getting emails and referring to the battery grips and flight mode. The truth is that it's a horrible situation were all in we took and impossible to get a straight answer on a solution. I have given up 4g, but still having problems with the plain old 3G. Please, be honest and let us know it is or it will never. I would get another phone and open a bbb if dispute is not resolved. Let's face it two more years to get a new phone at a discount is not going to happen, and I don't pay retail for something when I bought should work as it should be at a normal level. Data connection service does in my mind 100 percent more important and fundamental to a phone and we don't get that. If you bought a car and it will not drive or start you'll wait months for a possible solution. I do not.

  Let's see if one of the many can make a change. If you feel that it must be addressed sooner that later just leave a YES as a pole and caption that we deserve better especially for all the expectations that we have already endured

  Thank you

• Problem connecting WiFi with Milestone

  Hello

  I recently bought Milestone and Wi - Fi seems weird - it does not scan the available networks and says: "cannot start a Wi - Fi connection. Can someone help me out here?

  Thank you

  Have you tried a battery pull. Battery grips seem to help in many situations. There are a lot of things and jump start again. Turn off the phone, remove the battery for at least a minute and power back on. Now test functioning. I hope this helps.

• black screen at startup and even on HDMI

  My hp pavilion dv7 gives me a black screen at startup and even if it is connected to my HDTV via HDMI. have tried several methods but still not working (the battery grip and long pressing the power button and then using the AC adapter to turn on). Can someone help me solve the problem please.

  Yances,

  Welcome to the forum.

  Have a look here:

  Provides the steps necessary to test the memory and the hard drive and restore the operating system if the laptop does not start and no error message is displayed.

  HP Notebook PC - troubleshooting black screen displays with no error message during startup or boot

  The next document implies that the system provides an Error Message:

  HP Notebook PC - troubleshooting on a black screen error Messages that may occur during Startup or start-up

• BlackBerry Q10 Major problem with update (10.1.0.4181)

  I tried to do the update last night (10.1.0.4181). Once completed the update let me know that I had to restart my phone (standard) that I did.

  However, the reboot happened--got stuck on 100% loading screen (sitting for about 25 minutes). Do you have a battery pull and I tried again and this time it loaded and said my update was installed successfully - but when loading, there was clearly a major issue. The hub does not (just a black screen). When I try to open anything it opens--the box appears to say THAT BBM then everything stops, and then the entire phone will be closed and reboot.

  Even if I try to leave (not load anything) it keeps restarting itself. The longest I have had on is about 2 minutes.

  The update is not complete. It still shows my most recent software like being10.1.0.238. If I try to resinstall the update it just freezes at 0% and stops after 2 minutes.

  I tried to do a security wipe but it did not work so far - sitson the screen saying an erasure of security is ongoing, then just the boots down and when it restarts all my apps are still there (even if you can not open anything).

  I also tried to plug it into my computer and try to do a factory reset on BB link, but because the phone keeps himself restart the computer continues to lose the ability to communicate. In the middle of the attempt to reset it will come with a message saying that the computer can no longer communicate with the phone (usually right at the time, it is set to zero). I tried already to many battery grips and it recharges, and nothing has helped.

  I'm running a Q10 SQN100-3. My version of the software appears as 10.1.0.238, and I had no problem with my phone until I did the update last night for 10.1.0.4181. Any suggestion at this point would be helpful I thought I want to solve my problem with a factory reset, but with this problem of communication arise each time it resets which seems to not even be an option.

  Update:

  After a few tries, I finally got a security wipe, which resolved nothing. The phone is then in a never-ending cycle of starting with the introduction of screens.

  I finally downloaded autoloader and used that to wipe the OS and reinstall. Worked like a charm and the phone now works correctly.

• BlackBerry Z10 problem with reception and to make a call after updating to OS.

  I just updated my Z10 STL100-3 model with the new operating system 10.3.2.2168. Now, I can not answer incoming calls. The phone rings, but there is no screen to answer or reject the call. I am also unable to unlock while the phone is ringing. Once the caller hangs up the normal opening if Poster Advisor I missed a call and then allows me to unlock the phone. When you place a call, the screen does not change for me to end the call. In other words, I touch the contact and it will automatically start the numbering, but the screen does not respond or don't change to indicate that the call is made. Then I need to cut the phone to hang up!

  Hello and welcome to the community!

  Well, assuming that you have waited the usual 48-72 hours, with a lot of reboots (including the battery grips) and this behaviour is new, and the only thing that has changed is the operating system updated... so, the most common thing to do after an update which results in problems is to perform a reload of the OS. Sometimes the update process have errors and others... with a reload often cure the problems.

  Official methods, which will be controlled as to what exact OS versions are available:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-functions-and/how-to-reload-your-Blackberry10-O...

  Unofficial methods, which are cleaner and allow you to choose a version of the OS that maybe your carrier (or anyone they control your offers) delays in approval (unless you're on 10.3.2, in which case 10.3.1 and earlier are now blocked, but you should be able to use any 10.3.2 it's official):

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...
  • http://forums.CrackBerry.com/BB10-leaked-beta-OS-f395/BB10-OS-archive-943672/

  Of course, before you start this, you want a good backup link, a manual copy of the memory of your device to your PC and complete documentation of your configuration (identification information of account, adding applications, configurations, etc.). Sometimes, restoring a backup returns unit corruption even, must be eliminated and reconfiguration from scratch can solve that.

  Good luck and let us know!

• BlackBerry Q10 Q10 frozen - new

  I'm not having very good luck with this phone and for a long time for the reliability of my old 9700. Our office only supports BB10 (Apple and Android devices) there is not coming back.

  For the second time in a month froze that Q10. The phone turns on but when you tap that phone talk to name of any icon you just touched, say 'settings', but does nothing. Successive battery grips have not set anything. The first time he did it during the working day and tech support has disappeared with the phone for a few hours and he came back from work. Now, of course, it's the weekend and in the middle of ther vacation so I'm screwed. Someone at - it happen to them? Any fixes out there? I use the latest version of the operating system.

  I am in the minority in my cabinet who took with BB, but am now doubting my decision.

  Looks like you have activated the screen reader.

  To disable the screen reader, quickly tap the power button on top three times.

  Then go into your main settings > accessibility > and screen reader Beta and turn it off.