Event generated when swf was loaded

Similar Questions

• I installed Windows 7 on my computer. Its rebooted normally, but when he was loading files to the top of the color went all wrong... As you do not see the weight...

  Installation of window 7. ! With a problem! Help, please!

  I installed Windows 7 on my computer. Its rebooted normally, but when he was loading files to the top of the color went all wrong...

  As you do not see the weight...

  Please help me!

  • 512 GB of ram with a Flash ram Drive his 10
  • Windows aero does not support "as the scan did not say very important hahah: D.
  • Intel Inside Pentium 4
  • Reference Dell computer WITH a disk emachine hard and things 'VERY OLD '.
  • 149 with Flash Drive 500 GB hard drive

  Help, please!

  PS. Mr. need help! D:

  I can run vista Basic that lol

  I didn't mean that you cannot run Windows 7. I have run on systems with 512 MB of ram. It will work, but will slip. It will be the same for Vista. I recommend that stick you with Xp until you are able to upgrade your ram.

• Is there any event generated when I move any window or windows media player from primary monitor to secondary monitor.

  Original title: media Player from the window of the main monitor to the secondary display.

  Hello

  Whem I'm moving my Windows Media Player fromprimary on secondary screen (or any other window),

  is there an event generated by the Windows operating system?

  If yes how can I capture this event?

  Best regards

  Sharad

  Hello

  There is no event that is generated when you move any program or any window from primary monitor to secondary monitor.

  For more information visit: How to view and manage the event logs in in Windows XP Event Viewer

• Question of embedding fonts when SWF is loaded into the charger

  Hello.

  I ran into a problem of the incorporation of police where all the text fields with embedded police disappear when the SWF file is loaded as a child into a parent SWF. When the SWF file is read directly as stand-alone or inside a container of page HTML, text fields display perfectly with embedded fonts. Just not if the SWF is loaded into another SWF. It's basically the way I joined the police:

  [Inside the document class]

  [Embed (source="/Library/Fonts/Arial.ttf", fontName = "FontVerdana", mimeType ="application/x-font-truetype")]

  public static FontVerdana: Class const;

  var theFont * = new FontVerdana();

  var myText:TextField = new TextField();

  var fmt:TextFormat = new TextFormat();

  FMT.font = theFont;

  myText.embedFonts = true;

  myText.setTextFormat (fmt);

  Incidentally, I either work on a Mac using Flex 3.5. Anyone encountered this problem? What can be done to fix this?

  See you soon,.

  Harry

  Check out my blog on embedded fonts

  --

  Alex Harui

  Flex SDK Team

  Adobe System, Inc..

  http://blogs.Adobe.com/aharui

• video SEO is not even when SWF is loaded into SWF

  Copy the following code is based on the _droptarget info in the Actionscript 2.0 language reference. It works fine by itself but the breaks when the SWF is loaded into another SWF. Notice that I use the _lockroot property to keep the _root of the loaded clip.
  
  I've isolated the problem to the "if" condition The player does not seem to recognize the equivalence of the names. But when you debug with Trace, the names are the same.
  
  The goal is to have the drag snap object to the target object when the target but snap to its origin, if not on target. It works in 6, but the drag object snaps back to its original 7 - as if he had not fallen on the target object.
  
  

  A solution and the explanation is in the attached code:

• How can I list the main on a SWF timeline when it was loaded in another?

  I have a swf with functions of animation custon using actionscript 3. I am referring to the main timeline with Movieclip (root) and it works fine.

  However, the swf will be loaded into another (a custom player), and when this happends, everything stops working.

  I think it's because the Movieclip (root) now reference the swf loader and not the loads more, but I can't find any information on how to fix this.

  The key would be to break with the use of references to the root.  Whether or not this will be an easy task for you in this case depends on saturated how your code is with these references.  The shortest route for you may be to replace the references to the root by parent references instead.

  It is a reason say that your code should be limited to an image in the scenario primary (in fact they are more likely to say that it should be in a class of document - separate fla files/timeline).  If you have all the code forward in the file, and no code search backward, what ios and made a reference to root, so you don't have to worry about how it is loading in another file.

• Unload event for external swf [urgent need help]

  Hi master everything,.

  iI have mp3, eksternally loaded and checked main time...
  the bugs are
  1. If I want to go to another .swf file, I can still hear the noise...
  2. If I click on the button that linked to mp3.swf, the sound / song are duplicated by2 and then if I click again the sound are duplicated by3...
  How can I solve this problem? OIA, the buttons to call another swf are only in the main swf,
  and here is the code:

  You can use:

  zhe button

  var Xpos:Number = 140;

  var Ypos:Number = 100;

  var swf:MovieClip;

  var loader: Loader;

  addChild (loader);

  Function of BTN

  function btnClick(event:MouseEvent):void {if(loader!=null)

  {

  loader.unloadAndStop ();

  removeChild (loader);

  Charger = null;

  }

  loader = new Loader();

  var newSWFRequest:URLRequest = new URLRequest ("SWFs /" + event.target.name + ".swf");

  Loader.Load (newSWFRequest);

  Loader.x = Xpos;

  Loader.y = Ypos;

  addChild (loader);

  }

  Listeners of BTN

  shout.addEventListener (MouseEvent.CLICK, btnClick);

  song.addEventListener (MouseEvent.CLICK, btnClick);

  gallery.addEventListener (MouseEvent.CLICK, btnClick);

  about.addEventListener (MouseEvent.CLICK, btnClick);

• Loading of a 2nd 1 when SWF is completed, and a 3rd, then a 4th

  Hi, ive been pulling on my hair (we all have is not it...) with this one simple. I DID spent the last two days trying by myself, as it is the best way to learn. But now, I'm out of time and ideas. It's here.

  -J' have a main swf file, named holder.swf, in which I

  var loaderM:Loader = new Loader();

  var loadUn:URLRequest = new URLRequest ("un.swf");
  loaderM.load (new URLRequest (loadUn));
  addChild (loaderM);

  Try a different approach where you let the master file control the traffic and your loaded SWF honk their horns just when they are done.

  In the last frame of your 50 sovereign wealth funds secondary, you just put...

  Stop();

  dispatchEvent (new Event ("swfComplete"));

  ----------------------------------------

  The code in the main file would be something like...

  var: County: uint = 0;
  var swfArray:Array = new Array("un","deux","etc..."); all your swf files names
  var loader: Loader = new Loader();
  addChild (loader);

  function loadNextSWF(evt:Event=null):void {}
  var url: String = swfArray [count] + ".swf";
  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, assignListener);
  Loader.Load (new URLRequest (url));
  Count += 1;
  if(Count == swfArray.Length) {}
  Count = 0; start again
  }
  }

  function assignListener(evt:Event):void {}

  It affects a listener for the event distributed SWF

  MovieClip (evt.target.content) .addEventListener ("swfComplete", loadNextSWF)
  }

  loadNextSWF(); start the show

  By having the main file to handle everything through the aid of the table, it allows you a lot of freedom regarding the addition and the removal of the show.  Just change the content of the table to add or remove the file swf... and you can code all SWFs generically.  That can pave the way to have an xml file that provides the names of the files so that you don't have to edit/all Flash files recompile when the file data is changed.

  Things can probably be refined in the main code above, but these are the basics that it is functional.

• Adobe Edge animate event handler when the video starts to play

  Now I use

  document.getElementById('myVideo2').addEventListener (myHandler, 'ended', false);

  If I want to add a new event after a video was played.

  How can I check when a video actually started playing and see you on the screen? I need this because I want to add some additional animations around the video that must be triggered exactly with the first images from the video.

  I found the solution:

  Video.onplaying = function() {}

  Console.log ("video is now loaded and play");

  }

• SWF external loading gel iOS

  Hello

  I have an application with several external swf provided with the ipa. The application used to freeze only the appstore mode, but not in mode ad hoc or ipa-debug when trying to load a SWF, so I stopped using it and other sovereign wealth funds has worked properly in the mode of the appstore, and I presented the application correctly.

  I've updated the application a bit, but have not updated the external swf. Now, the application froze in appstore and ad-hoc mode when trying to load all SWFs. However, the application works perfectly in the ipa debug mode.

  This occurs even when I have package with the last AIR 13.

  I'm packing under windows.

  Any help is greately appreciated.

  OK, I fixed it.

  The problem is that I forgot indicator of debugging on the swf compilation and packaged for ios app store, and that was the problem.

  I suggest that adt issues an error when it encounters such debug swf and packaging to app store.

• The embedded controller (EC) data returned when none was requested. (T420s)

  Everyone sees this warring newspaper system running Windows 8 or Windows Server 2012?

  : The embedded controller (EC) data returned when none was requested. The BIOS may try to access the European Community without synchronization with the operating system. These data will be ignored. No further action is necessary; However, you should check with the manufacturer of your computer for an updated BIOS.

  Should I just ignore it?

  Concerning

  Anders Jensen

  This message normally appears permanently, if TPFanControl or PFControl is installed and the start-programs-TPFanControl-optional-acpiecnl was not used to disable logging these events...

• Error message: your loaded incorrectly and a temporary profile was loaded.

  I was watching a movie on Netflix and it froze the film. So I closed the film and all my icons are gone and my laptop would not completely shut down so I took out the battery and then I got a screen saying: Deleting orphan indexes, deleting the files to index etry, records must be verified. Then he when to loading office top and that is where I got your profile improperly loaded and a temporary profile was loaded.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  To resolve this issue, follow these steps:

  1. Log in the system by using an administrative user account other than the user account that is experiencing the problem.
  2. Backup all data in the folder of the current user profile if the profile folder still exists and then delete the profile folder. By default, the profile is located in the following location:
     %SystemDrive%\Users\UserName
  3. Click Start, type regedit in the Search box and press ENTER.
     Collapse this includes this image

     

     If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  4. Locate the following registry subkey:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
  5. Under the ProfileList subkey, delete the subkey named SID .bak.

     Note SID is a placeholder for the security identifier (SID) of the user account that is experiencing the problem. The SID .bak subkey must contain a ProfileImagePath registry entry that points to the folder of the original profile of the user account that is experiencing the problem.

  6. Exit Registry Editor.
  7. Disconnect the system.
  8. Log the system again.

  After you log in the system, the profile folder is re-created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And also read this:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Validation of required field only when the page loads (HR test case!) included

  Hi experts,

  
  Here you have a simple test for Jdev 12.1.3 HR case: https://dl.dropboxusercontent.com/u/18609389/TestHR.zip

  The main.jspx is just a button which CreateInsert a record dept displayed in another page:

  

  My problem is the following page (test.jspx) has this code to run when the page loads:

  <af:serverListener type="onloadEvent" method="#{backingBeanScope.backinBean.onPageLoad}"/>
              <af:clientListener method="onLoadClient" type="load"/>
              <af:resource type="javascript">
                function onLoadClient(event) {
                    AdfCustomEvent.queue(event.getSource(), "onloadEvent", 
                    {
                    },
  false);
                    return true;
                }
              </af:resource>
  

  The code is simply this (now):

      public void onPageLoad(ClientEvent clientEvent) {
          logger.severe("HR TEST.....");
      }
  

  And that's the problem, required validation is performed.

  

  Can you tell me why?

  Thank you

  Jose.

  Don't know what is my mistake, but the code is of the actionListener button is not called. :-(

  Well, you combined two different ways to do this (from my first answer).

  If you are still reading this, you will notice "or" before the second suggestion

  Thus,.

  1. keep your clientListener under af:document tag

  2. based on javascript, you find key (use: alert ("button");)  to see if you have referenced correctly your button in findComponentById())

  And then:

  approach 1:

  Use AdfActionEvent.queue (button, true);  queue event on your action button and implement your logic in function attached to the properties of your 'actionListener' or 'action' button (if you don't need listener server in this case)

  approach 2:

  Use AdfCustomEvent.queue (button, "onloadEvent", {}, false);  the queue onloadEvent on your button (in this case you need listener server attached to your button)

  Dario

• Dell XPS 8700 - failure of the keyboard when the bios boot (but not when Windows is loaded)

  My Dell XPS 8700 has 10 Windows and a Logitech Keyboard wireless, connected by USB. The keyboard works absolutely fine when Windows has loaded. I have the latest version of the bios, A11.

  However, when the computer is turned on and starts the bios start, it displays 'Keyboard Failure' on the screen for about half a second. When I try to go into the bios setup by pressing "F2" at the counter (I keep typing "F2" from the moment when I press the power button on the computer), there is no answer. The "keyboard failure" and inability to enter the bios setup seems to happen if I do a cold immediately after a stop start, a cold start after the computer is turned off for an extended period or a reboot.

  I tried to connect the wired keyboard original Dell one of the USB ports on the front of the unit (without disconnecting the wireless keyboard) with the same problem at the start of the bios.

  I encountered this problem on versions of bios A11 both A03. I know that in the past, although I don't remember when - I was able to enter the bios setup by pressing "F2".

  Any thoughts on how to solve this problem?

  You can try and reset the CMOS. It will return your settings to factory settings, but not the version. Usually, this erases these problems because CMOS stores data editable such as your wireless keyboard settings. BIOS stores the information about the basic material that is unchangable as your keyboard usb, mouse and other essential equipment. If you notice, when you just plugin any keyboard and mouse, its recognized at startup. Your needs software to run wireless device and that is stored in the CMOS.

  So once reset you the CMOS, you may need to then install the wireless software.

  Good luck.

• what event fires when one end of captivate?

  Hello

  I am a web application developer and I work with Captivate. I'm not a creator of captivate myself, just a programmer, so I don't know the first thing about Captivate (though I am working with someone who does). I wonder if there is an event that fires when the captivate is done - in other words, when the user clicks on the button 'send' on the last slide, after which there is nothing more for the captivate to do.

  My friend the designer Captivate says that the Send button is wired to an event handler in the CPM.js file. The script is named "assessment_Pass" and we located the CPM.js event handler. However, I can't work with this. I can't manually handle small javascript that Captivate generates, especially when we offer hundreds of captivate files and store the update. I need to work in javascript in my Visual Studio project. If I could know what event is triggered (if an event fires) when the captivate is done, I can then hook up a javascript event handler in my development environment.

  I found this list of Captivate events (they are actually for the Interface API Captivate that I prefer to work with, but will any event), but none of that ' s I tried seem to draw.

  Any help is very appreciated.

  [quote = "TLCMediaDesign"]

  {window.cpAPIEventEmitter.addEventListener ("CPAPI_VARIABLEVALUECHANGED", function ()}

  (resultChanged ();}, "result"); [/ quote]

  This solved my problem - I had the arguments are passed in the wrong order: variable Manager, events,.

  But you like: Event Manager, variable.

  Once I switched around, it started working.