Question of embedding fonts when SWF is loaded into the charger

Similar Questions

• video SEO is not even when SWF is loaded into SWF

  Copy the following code is based on the _droptarget info in the Actionscript 2.0 language reference. It works fine by itself but the breaks when the SWF is loaded into another SWF. Notice that I use the _lockroot property to keep the _root of the loaded clip.
  
  I've isolated the problem to the "if" condition The player does not seem to recognize the equivalence of the names. But when you debug with Trace, the names are the same.
  
  The goal is to have the drag snap object to the target object when the target but snap to its origin, if not on target. It works in 6, but the drag object snaps back to its original 7 - as if he had not fallen on the target object.
  
  

  A solution and the explanation is in the attached code:

• Acer Aspire V5 552 slow game performance low when it is plugged into the charger (HELP!)

  So, I recently noticed that my Acer laptop has a problem when it comes to games. The speed of the CPU is really low when you start a game, I did not notice this until a few hours before... I was playing Borderlands 2 and I am disconnected from my laptop to move it to my office and I noticed that my FPS has increased almost double what they were before, I plugged my laptop for the charger and I started to look at the the CPU cores, each carrot got preatty fluctuating between speed and low speed. I've tested this with all my games and all had the same results, for example a Borderlands 2 area when it is plugged in the exercise was about 18-22 FPS, but when disconnected from the charger the FPS increased from 34-48 or more. I tried to read a lot of things on the web and can not find a solution to this...

  Another test I did was with Dolphin Gamecube emulator, the FPS when playing the legend of Zelda The Wind Waker varies between 22-26 or lower on the places of strong thickness, when unplugging my laptop charger I have 30 fps constant in these heavy areas.

  Also with Counter Strike Global Offensive, the game normally ran about 50-60 FPS in all the cards and then tested without the charger plugged in and got 70-120 FPS on all cards

  https://www.YouTube.com/watch?v=xc6Hwgedqmo

  This video shows exactly what happens for me, unless I have an AMD GPU and CPU.

  My Acer Aspire V5 552 Specs are.
  Windows 7 X 64
  8 GB RAM
  AMD A8 - 5557M @2. 1 GHz to 2.8 GHz Turbo
  AMD 8550G GPU
  I have all the latest drivers and updates installed.

  The charger is not damaged, it is original one supplied with the notebook.

  Got a nice deal on a MSI gaming laptop. At first I thought that the Aspire V5 has been an excellent laptop for budget games, but then turned that has a performance problem that ruined the processors to give power maxi while only plugged in, but when unplugged the other way around. Still a nice cell phone with potential wasted with this particular problem.

  No solution to this problem, tecs don't even bother looking at BIOS like other manufacturers of laptop to solve this same problem.

• My iphone screen has gone completely blank. I can still talk to Siri via activation of the voice and the phone still makes a noise when I plug it into the charger, but the screen does not respond.

  white screen

  Try a forced reboot. Hold the home button and power at the same time until you see the Apple logo. About 20 seconds or more.

• When you try to download a PDF file to an interactive site, I get the announcement: "the attached PDF file is referring to a non-embedded font Tahoma. Please delete, incorporate the police and set again. "How to integrate it, or in fact any other font?

  When you try to download a PDF file to an interactive site, I get the announcement: "the attached PDF file is referring to a non-embedded font Tahoma. Please delete, incorporate the police and set again. »

  I couldn't get rid of the Tahoma police in the WORD file.

  How to integrate it, or in fact any other police?

  It should be an option to make the PDF.  Which version of Acrobat you are using, and exactly the method and parameters do you use to make the PDF?

• Why is my cd not load & play automatically when it is inserted into the media player?

  Why is my cd not load & play automatically when it is inserted into the media player?

  If you use Windows Vista or Windows 7, try the following:

  Click Start, type: AutoPlay

  Press enter on your keyboard

  Scroll to CDs

  Click in the list box

  Select an action:

  Play audio CD using Windows Media Player.

  See:

  Windows Media Player Fact not play Audio CD- Roma automatically

  Also:

  Media Player 12 auto-play when inserting audio CD ... behavior

• What does mean Green Flash when it is placed on the charger

  What does a Green Flash when it is placed on the charger

  Hello

  It confirms that your watch has begun to load.

  The symbol also displayed if you tap the screen while your watch on the charger to indicate that the load is still ongoing.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• cannot access windows in safe mode because the keyboard is disabled until windows is loaded into the system

  I installed a keyboard wrong driver and now my winxp support with virtually no feature mouse or the keyboard, both frozen. I can't even load windows in SafeMode to solve my problem of driver, because my keyboard lights up until windows is completely loaded into the system. And it was actually a plu problem that I don't take care off the coast in time... Now, I was struck with a bigger question. Any suggestions from anyone, I appreciate it, thanks.

  I have windows xp pro sp3

  Can enter you the BIOS setup? I remember that my system has recognized a key led even with disabled USB legacy support. Then you can activate the support legacy USB in the BIOS. In time, you have to press F8 for safe mode there is normally no active driver at all, everything is managed by the BIOS. Another possible solution would be using a PS/2 keyboard...

• Can photos and music will be loaded into the memory of the dashboard?

  Can photos and music will be loaded into the memory of the dashboard?

  Hello Tom,

  The internal memory of the Dash device is not accessible to the user. Therefore, pictures and music files cannot be uploaded to the internal memory of the dashboard.

  However, the USB port on the Dash unit allows you to view photos or listen to music stored on a USB key.

  If my post answered your question, please mark it as an "accepted Solution".

• game fails ready to load into the Media Center tv installation procedure

  game fails ready to load into the Media Center tv installation procedure

  Hi Doug5745,

  Welcome to the community Microsoft and thanks for posting the question. Looks like you have a problem with playing loan in Windows Media Center, check out the following steps:

  Method 1:

  You may need to install Microsoft Silverlight on the computer, I'd say you install latest Silverlight and check if you are able to use play on Media Center loan.

  Silverlight

  http://www.Microsoft.com/Silverlight/

  Method 2:

  If this fails to solve the problem, I suggest you to post the question in this forum to improve assistance:

  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/114.aspx

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• question of Embeded fonts

  Someone can asnwer the following about the fonts embedded in a Flex 4 (component) application:

  1. is the file of the same font for Macintosh and Windows-based computers?

  2. embedded fonts look as good as system fonts?

  Thank you.

  I'm not sure that understand #1.  Data from the specified font file is copied

  in the SWF file and used by the player to display fonts on all platforms.  The

  OS is not delivered the file to make the rendering of the fonts.

  Embedded fonts are the only way to ensure consistency between platforms

  and machines.  If someone does not have the policy that you want to use, on most

  Operating systems, you will get an approximation of the police.  Display of built-in police

  quality is not controlled by the options of smoothing of the fonts on the user's computer.

  You should see what looks like a font not incorporated during a rotation on XP with

  font-smoothing off the coast.

• Event generated when swf was loaded

  Hello

  I've been to this search but nothing. I need to use an event generated when the site is loaded for the first time (manage the resizing of the scene). This is because the 'resizestage' event is generated only when I resize, so the first time the site had been loaded, the size is not changed.

  Is there something?

  So the addition of the ENTER_FRAME seems logical. Assuming that your site is a long frame? How many images in your scenario "main"?

  This function simply says:

  1) when you enter the first image access the function of "loading".

  2) the total number of bytes of the file loading

  3) also get the number of bytes currently loaded.

  4) if the total number of bytes is equivalent to the bytes that are loaded

  5) remove the eventListener so that it doesn't keep getting called

  6) then do your resizing scene or call another function.

  function loading(e:Event):void {}
  (2) var total: Number is this.stage.loaderInfo.bytesTotal;.
      (3) var loaded:Number is this.stage.loaderInfo.bytesLoaded;.

  (4) if (total == load) {}
            (5) this.removeEventListener (Event.ENTER_FRAME, loading);

  (6) / / do your resizing once loaded .swf file

  or call another function

  }
  };

  (1) this.addEventListener (Event.ENTER_FRAME, loading);

  In addition, wouldn't you want to do with a scene of charger?

• Acts nested SWF different when it is loaded through the skin

  OK, I had to make a flash swf file to add drag and drop functionality to Captivate. I have built and tested my movie and it works perfectly, when I loaded in captivate and tested the movie, it didn't work. I added in a trace to see the _droptarget location. When I test the movie in flash, he returened _level0.target01_mc so I reloaded the captivate movie and published the file.
  
  I opened the published file captivate swf in flash with the skin (if I can see my trace I added) I had _level0.slide7__color_mc.s7_i0_swf_mc.m_swf_mc.target01_mc, but when I open the file published skin which was published from captivate I _level0.contentShade_mc with no other depth.
  
  So I don't know if I should just make my own skin for the file or if there is a work around. If I do my own skin file I lose my SCORM tracking or statement in the content file?

  I used _droptarget when I should have done a hitTest

• getURL works not when the swf is loaded into another swf

  Okay, I need help with something relatively simple which for some reason that I was not able to find information about everything?
  
  I hope that this will be something easy to correct.
  
  I basically the following:
  
  
  • my main movie "Home.swf".
    
  • another film "Sub.swf".
    
    I loaded "Sub.swf" in "Home.swf" via an empty movieclip.
    
    In "Sub.swf", I have some links that, when clicked call getURL and open an HTML page in the browser.
    
    But for some reason any the getURL does not work and I think its because the getURL is called from a movie loaded into "Home.swf".
    
    I tried to change the actionscript code for:
    
    _root.getURL('/MyPage.html');
    _parent.getURL('/MyPage.html');
    
    but neither (_root / _parent) seems to work?
    
    Need some help here please.
    
    Thank you very much.
    
    Kind regards
    M.

  It is not the getURL that's the problem. It's your _level0.imgMC.MC5 that is the problem.

  in Sub.fla, replace _root _level0 and add the code below your delivery code:

• Embedding fonts from swf error

  Hey, I'm tring to embed a font postscript called Frutiger with a style of "Black 75". I use Flash, and add a dynamic text with the said area police (with text) and then incorporate the police then export the swf file. In Flex, I create a css file with:

  @font-face
  {
  SRC:URL("..) ("/ fonts/Frutiger1.swf");
  fontFamily: "Frutiger";
  
  }

  I also tried Frutiger 55 Roman, Frutiger 75 Black for fontFamily name, but I get the same error:

  Police "Frutiger" with a weight of normal and regular style not found.

  I even tried to use flash cs3 as I read that he has no problems with the fonts as of cs4, but even the flash cs3 could not display Frutiger with a "Black 75" style in the font list. the I read so many forums on this and tried so many solutions, workaround, but in vain. If someone has solved this?

  Thanks in advance...

  -Mike

  Try this syntax instead:

  [Embed (source = "embedfonts.swf", fontName = "Freestyle Script", fontStyle = "italic", fontWeight is"fat")]

  public static var freestyleBoldItalic: Class;