event recording refnums data types do not match

Similar Questions

• VARCHAR2 data type do not convert date

  Dear gurus
  
  Version of database - 10.2.0
  
  I have a problem of varchar2 data type do not convert date...
  
  I have a table like
  
  
  SQL > table desc.
  Name Null? Type
  ----------------------------------------- -------- ----------------------------
  NAME VARCHAR2 (10)
  RECORD_DATE VARCHAR2 (20)
  
  and the record consists are...
  
  SQL > select * from table;
  
  NAME RECORD_DATE
  ---------- --------------------
  Nimai 09/09/2012 09:10
  Nimai 09/09/2012 10:10
  Scott 09/09/2012 11:10
  Scott 09/10/2012 10:00
  Nimai 09/10/2012 11:00
  
  
  If the "Record_date" column that's 09/09/2012(dd/mm/yyyy)
  
  09/09/2012 and I want to query the records which includes the date ' select * from table where record_date = 09/09/2012 "...
  This work of query...
  
  Select * from table where
  TO_CHAR (to_date (substr(record_date,1,10), ' dd/mm/yyyy'), ' dd/mm/yyyy')
  =
  TO_CHAR (to_date (substr('09/09/2012',1,10), ' dd/mm/yyyy'), ' dd/mm/yyyy')
  ;
  
  But if the "record_date" column that's 9/9/2012(d/m/yyyy) I did not what to do which function to use? /
  
  Help, please!
  
  Thanks in advance
  Nimai kinzonzi
  
  Published by: 955748 on September 22, 2012 03:47
  
  Published by: 955748 on September 22, 2012 04:10

  Hello;

  Keep things simple: (get rid of TO_CHAR)

  SELECT TO_DATE ((substr (record_date, 1, 10), ' DD/MM/YYYY') of?)

  TO_DATE (substr (record_date, 1, 12), "HH24 MON-DD-YY")

  Best regards

  mseberg

• Why do write can not be performed because the number of data channels does not match number of channels in the task.

  Possible reasons:

  Scripture cannot be performed because the number of data channels does not match number of channels in the task.

  When writing, provide data for all channels in the task. You can also change the task so that it contains the same number of channels as the written data.

  Number of job channels: 8
  Number of data channels: 1

  Lama says:

  The DAQmx vi writing gives me the error. If I run a single channel, isn't a problem. Multichannel gives me error.

  You are funny! Why tie yourself to work VI (single channel) instead of one that gives you errors (multichannel)?

  (If your car does not work, you bring car your wives to the mechanic, right!)

  What is the exact text in the multichannel 'physical channels' when you do the AO control?

  Lama says:

  I did a sequence to ensure that each function has been run in the correct order. Wouldn't a race condition.

  All you have to do is wire the 'start of task' error at the entrance of error of the DAQ assistant and then back to 'stop task' and things will run in order. Guaranteed! Think the stream! Everything else can run in parallel or the order is irrelevant.

  First convert the sequence stacked to a sequence of plate, remove the flat sequence and add the mentioned son. Now, do a "cleaning pattern.

  A when stacked with the inhabitants of the sequence is one of the worst construction you can possibly do. It makes the code difficult to follow, impossible to maintain, difficult to debug.

• ORA-06504: PL/SQL: return variables of the game results or the query types do not match

  Hello!

  I have a simple object type and a proecdure in which I am trying to use it to insert into another table

  -object

  CREATE ORREPLACETYPEmt_mtg ASOBJECT

  (

  ACOL NUMBER ,

  BCOL NVARCHAR2 (100)

  );

  CREATE ORREPLACETYPEREF_MTG ASTABLEOFMt_MTG ;

  -same structure as the use of sampletbl target table in the cursor query

  create table tbl_MT_MTG

  (

  ACOL NUMBER ,

  BCOL NVARCHAR2 (100)

  );

  -procedure

  CREATE ORREPLACEINTERIORTEST_PROCEDURE1

  AS

  ref_cur sys_refcursor ;

  REFR ref_mtg ;

  BEGIN

  OPEN ref_cur FOR

  Select acol,

  BCOL

  DE sampletbl où rownum<10;

  Fetch ref_cur in bulk collectintorefr;

  Insert intotbl_MT_MTG(acol,bcol)selectacol,bcol fromtable(refr);

  commit;

  CLOSE Ref_cur;

  END;

  /

  When I run this procedure fails with

  ORA-06504: PL/SQL: return variables of the game results or the query types do not match

  ORA-06512: at "TEST_PROCEDURE1", line 10

  ORA-06512: at line 2

  Any help on this please...

  Thanks to an OLD POST below

  so perfect helped me! Thank you

  Tubby

  After 5 years of more :-)

  How to store refcursor in collection How to store refcursor in collection

• SYS_REFCURSOR: Variables of the game results or the query return types do not match

  Hello
  I have 2 snippets below, it codes marked 'Test 1' does not work, it gives the error message, see the code below. Why it gives an error? The second code succeeds and works according to the needs.
  
  Test1 in brief:
  Call proc P3
  Proc calls P3 P1
  
  Test 2 in brief:
  Call func P2,
  Proc calls P2 P1.
  
  ---
  
  
  1. test 1, it breaks down:
  

  create or replace procedure P1 ( i_name IN VARCHAR2, 
     o_cur          out   SYS_REFCURSOR )
  is
     v_cur          SYS_REFCURSOR;   
  begin
     open o_cur for
        select i_name from dual;
  end P1;
  /
  
  create or replace function P2 ( i_name IN VARCHAR2
  ) 
  return SYS_REFCURSOR
  is
     v_cur          SYS_REFCURSOR;   
  begin
     p1( i_name, v_cur); 
     return v_cur;
  end P2;
  /
  
  create or replace procedure P3 ( i_name IN VARCHAR2, 
     o_cur          out   SYS_REFCURSOR )
  is
     v_cur          SYS_REFCURSOR;   
  begin
     p1( i_name, o_cur);      
  end P3;
  /
  
  
  declare
     v_name         varchar2(100) := 'test1';
     v_cur          SYS_REFCURSOR;      
     v_fetch_var    varchar2(100);
  begin
     P3(v_name, v_cur);
     --v_cur := P2(v_name);
     
     if v_cur%ISOPEN then
        dbms_output.put_line('v_cur%ISOPEN=true');
     else
        dbms_output.put_line('v_cur%ISOPEN=false');
     end if;
     --
     loop
        fetch v_cur into v_fetch_var;
           exit when v_cur%notfound;
           dbms_output.put_line('v_fetch_var='||v_fetch_var);
     end loop;
  end;
  /*
  Output:
  v_cur%ISOPEN=true
  ORA-06504: PL/SQL: Return types of Result Set variables or query do not match
  ORA-06512: at line 16
  */

  2. test cycle 2, he succeeds:

  create or replace procedure P1 ( i_name IN VARCHAR2, 
     o_cur          out   SYS_REFCURSOR )
  is
     v_cur          SYS_REFCURSOR;   
  begin
     open o_cur for
        select i_name from dual;
  end P1;
  /
  
  create or replace function P2 ( i_name IN VARCHAR2
  ) 
  return SYS_REFCURSOR
  is
     v_cur          SYS_REFCURSOR;   
  begin
     p1( i_name, v_cur); 
     return v_cur;
  end P2;
  /
  
  create or replace procedure P3 ( i_name IN VARCHAR2, 
     o_cur          out   SYS_REFCURSOR )
  is
     v_cur          SYS_REFCURSOR;   
  begin
     p1( i_name, o_cur);      
  end P3;
  /
  
  
  declare
     v_name         varchar2(100) := 'test1';
     v_cur          SYS_REFCURSOR;      
     v_fetch_var    varchar2(100);
  begin
     --P3(v_name, v_cur);
     v_cur := P2(v_name);
     
     if v_cur%ISOPEN then
        dbms_output.put_line('v_cur%ISOPEN=true');
     else
        dbms_output.put_line('v_cur%ISOPEN=false');
     end if;
     --
     loop
        fetch v_cur into v_fetch_var;
           exit when v_cur%notfound;
           dbms_output.put_line('v_fetch_var='||v_fetch_var);
     end loop;
  end;
  /*
  Output:
  PROCEDURE P1 compiled
  FUNCTION P2 compiled
  PROCEDURE P3 compiled
  anonymous block completed
  v_cur%ISOPEN=true
  v_fetch_var=test1
  */

  Published by: CharlesRoos on February 8, 2010 05:06

  CharlesRoos wrote:

  Thenn should be documentation that says "recovery of the data type that sys_refcursor fails if you pass by reference too often."

  I can't really work on what your nested code is supposed to do, but in a simple example, this statement is false.

  SQL> create or replace procedure p1 (l_c out sys_refcursor)
    2  is
    3  begin
    4      open l_c for select dummy from dual;
    5  end;
    6  /
  
  Procedure created.
  
  SQL> create or replace procedure p2 (l_c out sys_refcursor)
    2  is
    3  begin
    4      p1 (l_c);
    5  end;
    6  /
  
  Procedure created.
  
  SQL> var c refcursor
  SQL> exec p2 (:c)
  
  PL/SQL procedure successfully completed.
  
  SQL> print c
  
  D
  -
  X
  
  SQL> create or replace procedure p3 (l_c out sys_refcursor)
    2  is
    3  begin
    4      p2 (l_c);
    5  end;
    6  /
  
  Procedure created.
  
  SQL> exec p3 (:c)
  
  PL/SQL procedure successfully completed.
  
  SQL> print c
  
  D
  -
  X
  
  SQL>
  

  However, I would say from a Ref Cursor once between PL/SQL procedures is already too.

  Re: Extract of the cursor variable

  And there is documentation saying that.

  http://download.Oracle.com/docs/CD/E11882_01/AppDev.112/e10472/static.htm#CIHCJBJJ

  Purpose of cursor Variables

  Variable cursor allows you to pass between PL/SQL stored subprograms and their clientssets of query results. This is possible because the PL/SQL and its clients share a pointer to the work area where the result set is stored.

• Timestamp for date columns data type are not imported in discoverer admin

  Hi all
  Someone you will suggest why timestamp data type columns are not imported into admin. discoverer other types of data import you correctly, but the timestamp data type columns are missed.
  
  Please let me know to change the type of data is not possible at this time.
  Thank you

  Hello
  You will be disappointed because the timestamp columns are not one of the recognized data types supported by the discoverer. He acknowledges only dates, strings and (integer and decimal) numbers.

  Maybe you could put up a view that matches the table you use, convert the timestamp in a rather ordinary date?

  Then, inside your end-user license, all you would have to do is redirect the folder to view.

  Best wishes
  Michael

• How to record a data type float [64] table in a file?

  I have a table of type float64 [] data I want to save to a file.  I tried to use the ArrayToFile function, but he dislikes the type of data [] float64 .  I'm with LabWindows/CVI version 7.1.

  Why not use the data type double?

• Pool and the Volume of data latency does not match the SanHQ

  Using some PS6000 (Sata and SAS) as a back-end for ESXi and looking at the graph view on SanHQ and the raw data on export, but I'm not able to give a sense of latency information.

  Generally for fields, the data in the column pool or member matches very closely to the sum of the parts of the volume (for IOPS / s, flow, read, write, etc.)

  However, latency is not, nor is he anywhere near average either.

  In the graphical display we noticed high (20-40 ms) latency playback of our pools and members, but the volumes that make up these pools are all less than 10ms. During a storage vmotion, we will see a huge spike in IOPS / s and latency and sizes KB will drop to almost nothing during the copy rebound back at high levels as the traffic goes down.

  Makes a lot of sense to me (except perhaps if seq I/O is reduced to deal with latency)

  To monitor latency, it seems that I need to watch the largest volume of latency of a given pool, but not the pool itself or asymmetric information.

  I would get a few reports of MS Log Parser against export CSVs, but I need to make sense of this first. Latency is a KPI is no not a lot of sense.

  When you see the IOPS rise and the latency goes down, it's actually a normal thing. It is called Nagle algorithm. It makes pretty much the TCP packets wait until they are full before sending them. Here is a document that can be useful, what explains the algorithm more in detail.

  http://SearchNetworking.TechTarget.com/definition/Nagles-algorithm

  Until reporting problem you're talking about I would recommend making sure that the last FW is installed on all members of the Group and ensure well the last version of SAN HQ are also installed. Just curious you have configured replication? I can't wait to hear back on your part.

• Pof enable binary data cluster does not match

  Hello
  
  I have two caches LatestTradesCache / LatestTradeMTMCache running in the same DistributedCacheService in a cluster of pof-activated. I'm running an aggregator on the LatestTradesMTMCache and posted information on the console. My cluster if pof-activated
  
  In an aggregator, I extract the TradeId of the TradeMTMId (entry.getKey () by analyzing the binary key to a PofValue). Based on the TradeId, I need to search the LatestTradesCache for this TradeId and whom to include in the results if the TradeId exists.
  
  The code below works in my Aggregator.aggregate (entries)
  
  + / / get the support of business plan +.
  Cache map = entry.getContext () .getBackingMap ("LatestTradeCache");
  
  + / / get the TradeId of the support card +.
  TradeKey binary (binary) = cache.keySet () .iterator () .next ();
  
  Journal ("binary key trades == >" ((AbstractPofValue) pofTradeId) .getSerializedValue () ""); +.
  Journal ("string trades key == >" ((AbstractPofValue) pofTradeId) .getValue ()); +.
  
  Output:
  
  Binary trades key == > Binary(length=21, value=0x0D9301154E0F474453204C444E3A496E7631323334)
  Trades key string value == > GDS LDN:Inv1234
  
  I extracted an object from the LatestTradeMTMCache key as below the commercial code
  
  + / / Removes the TradeId (String) TradeMTMId +.
  PofValue pofTradeId = (BaseVersionedODCIdSerializer.POF_NON_VERSION_ID) pofTradeMTMId.getChild;
  
  Journal ("binary Pof trades key == >" ((AbstractPofValue) pofTradeId) .getSerializedValue () ""); +.
  Journal ("string trades key == >" ((AbstractPofValue) pofTradeId) .getValue ()); +.
  
  Output:
  
  Binary Pof trades key == > Binary(length=17, value=0x4E0F474453204C444E3A496E7631323334)
  Trades key string value == > GDS LDN:Inv1234
  
  PROBLEM: Since then, the binary object values ("GDS LDN:Inv1234') in LatestTradeCAche and that which comes from TradeMTMId are different,
  the search still fails.
  
  Don't know why the binary file would be different, when the entire cluster is enabled in pof. Maybe I'm missing something.
  
  Help, please!
  
  Thanks a ton!
  
  Amit

  Aleks.Seovic wrote:
  Hi Amit,

  In fact, Robert estimate was right - you deal with decorated in integer value:

  0d - ExternalizableHelper.FMT_IDO constant, which is an indication that the rest of the binary file is decorated int value
  9301 - int decoration
  15 - Constant ExternalizableHelper.FMT_EXT, which indicates that the binary value that follows does not default serializer (which basically means it's a POF value)

  Hi Aleks,

  Yes, we've been through on this gene, and he says that decoration contains the partition id. I also sent the information on to Amit.

  >

  The rest is your channel serialized by POF:

  4th - type POF for channel id
  0f - length of the string
  474453204C444E3A496E7631323334 - string value

  I found this, too :-)

  In the second example you retrieve child to a PofValue property, which is no decorations and/or the format specifiers (made only top-level object).

  Now, so that the above explains why there is a difference, it is not answering your question. To be honest, I have no idea when and why the decoration that you encounter is applied and AFAIK decorations aren't publicly documented and changes between versions, so I don't think you should even may attempt to decorate your objects to match.

  My advice is to simply search serialized object using the key deserialized (String) instead of through a storage card and use keys (binary).

  Kind regards
  ALEKS

  Gene has recommended the following to create the key with all the necessary decorations storage card:

  backingMapManagerContext.getKeyToInternalConverter().convert(oKey)
  

  where oKey is a representation of the cache key Java object.

  Best regards

  Robert

• Scripture cannot be performed because the number of data channels does not match number of channels in the task.

  My VI works as a motion detector.  Whenever the motion detector is activated, the led lights up and a beep is heard (a switch will exercise my motion sensor).  Once all the lights are on, the system reset is supposed to light up, and then the other three lights turn off back waiting to be activated once more.  My attachment saved as "sensor project", I have the VI working with data acquisition by implementing a case of random number, and the VI works here to give a demonstration of what I'm trying to work in favor. Any information would be greatly appreciated.

  You have some problems of logic and data flow.

  Once all three loops stop sensors, all outputs are necessarily true, then the case and a compound bow structure in the loop (reset) next is useless. Because the boolean in the fourth loop ending is immediately true, the loop to stop and not care about the State of the reset button. Maybe you should connect the termination condition to the wire going to the system reset light instead. Since it is also a polling loop, it needs a small wait. Once you press reset, the VI full and stops. (Do not use the continuous operation mode!).

  Solution: Create a state machine with a single outer loop. You have 4 x code too!

• What are the best practices for creating only time data types, and not the Date

  Hi gurus,

  We use 12 c DB and we have a requirement to create the column with datatype of time only, if someone please describe what are the best practices for the creation of this.

  I would strongly appreciate ideas and suggestions.

  Kind regards
  Ranjan

  Hello

  How do you intend to use the time?

  If you are going to combine with DATEs or timestamps from a other source, then an INTERVAL DAY TO SECOND or NUMBER may be better.

  Will you need to perform arithmetic operations on time, for example, increase the time to 20%, or take an average?   If so, the NUMBER would be preferable.

  You are just going to display it?  In this case, DAY INTERVAL in SECONDS, DATE or VARCHAR2 would work.

  As Blushadow said, it depends.

• CHD: the string is used as an index of change in data type? String to double?

  Hello

  I'm new to the tiara. I'm reading the line of a channel number and then to read the data of a channel which is in the same line of another channel.

  That's why I use the SMC function but my index seems not to fit. What I need to change in the code?

  error:

  CHD (2, NOVALUE): = 785 wird die Textvariable «...» CHD (2, > N)

  Code:

   

  DIM intloop, zeilenwerte
  
  Line DIM, aktwert, index
  
  Call ChnAlloc ("zeilenwerte", lang, 1, DataTypeFloat64)          ' Create channel,  'lang' is the size of a channel
  
  index = 0
  
  index = 1 to lang
  
     index = index + 1
  
     aktwert zeit (index) =                         ' get the value that will be compared to the SOPS in the following line of code
  
     Line = PNo (myChannel, aktwert)        ' it returns the line only by comparing aktwert valued myChannel
  
     CHD (line, zeilenwerte) = intloop           '  <--->here the error. try to get the value in a line @index do String data types does not match? what do I do then?
  
  Next

  Thank you very much for your help!

  Buddhist salvation,

  It seems to me that you would be better to use "Linear Mapping" in the palette of ANALYSIS "Suitable curve", but you should be able to get your code works by passing the name of the channel in this second parameter instead of an empty string variable.  You would have noticed that if you had OPTION EXPLICIT the first line of your code - always a good idea.

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• Problem of XML data type

  I am trying to unflatten data from an xml file but my entry type for the type on the unflatten my guess isn't valid, and I get error 1106.

  Is attached, the file xml and VI

  XML file is in text loading constraints

  Your cluster of data type does not match your XML file. Fixed VI (LV version 2013) is attached. However, the file you posted seems to be a single element, not the entire file, so I can't verify that it works.

  If you have a previous version of LabVIEW, the cluster lacked a time stamp and had a cluster at the end which should be a string.

  Double post here.

• using case, but by changing the data type of diff

  Hi guys, I am creating a view and selecting in a column that has a value of-1, 0 or 1, it's very good and I was about to use a case statement to convert the - 1 to "n", but obviously I can't do what data types do not match, I can't change the data type of the original column until someone knows how I could achieve This or a similar output, for example, is there a way to add an extra column to the view and just copy the numbers to the horizontal except for when it is - 1, we will copy a "n" throughout. the new column might be char and we could convert the numbers to a char when their through copying. Is it possible to do and if so could someone explain or give me an example of how to do it.
  
  Thank you.

  An alternative to the above:

  case when col1 = -1 then 'N'
       else to_char(col1)
  end
  

• define a data type (read binary)

  Hello

  I want to read a file GET TRC and fight with its data type, I know that I can put a cluster in the entry of the data on a "read the binary" type, but I don't know how it actually works, it's what I have:

  I have a definition of the TRC header file:

  offset: 0, label: patient info, data type: char, description: patient information

  offset: 32, label: recording information, data type: char, description: recording information

  offset: 64, label: acquisition unit, data type: Unsigned long, description: device type

  etc...

  Above is an example (a fake), because I can not give the description of file structure, this specific file...

  So my question is: how would you define a data type cluster that could read binary files and lectures we love exactly this way?

  Or it only works with files saved as a structure for labview? For example, a cluster?

  Best regards

  Thijs Boeree

  ThijsBoeree wrote:
  Hi, I'm on my way back now, so I'll check the first thing in the morning. I thought about it and he came to the conclusion that I might need to do a painting of a cluster with an offset, length (County) and different types of data and run in a loop of fror to load the binary file for reading and the position of the file 'set' to recover data and afterwards put them in a well-defined place cluster!
  But maybe you have the same solution...

  You can do this, but of course you can't auto-index different types of data in a table. But you could fill the cluster directly in the loop for.