How to record a data type float [64] table in a file?

Similar Questions

• How to force the data type in create table field?

  Hi all

  I need to force my table to create as follows

  Create table XYZ

  (Test varchar2 (10 CHAR)

  ...

  );

  When I run my Interface the script is

  Create table XYZ

  (Test varchar2 (10))

  ...

  );

  and the DBMS translated into

  Create table XYZ

  (Test varchar2 (10 BYTE),

  ...

  );

  I have the same problem with I$, C$, and so on.

  Best regards

  Marco

  Hi all

  I fix my problem:

  In Phisical Tecnology, under ORACLE Tecnology, data TYPE, I modified the definition of VARCHAR2 in VARCHAR2(%L CHAR).

  (Before it was VARCHAR2 (%)).

  Thank you all.

  Marco

• Numbers - how to import external data to a cell in a single file into a new cell in another file?

  Numbers - how to import external data to a cell in a single file into a new cell in another file?

  I want to do the same thing in numbers (3.6.2 (2577) I used to do in Excel (any version):)

  to import a calculation of a cell in a file in a new cell in another file.

  Example: I want to import the result of a sum in a specific cell of my accountant in August to a cell in comparison in my accounting of September.

  It was so easy in Excel. Until the reference computer broke down.

  By the numbers, I tried to copy - paste the contents of the cell formulated, but not good.

  No help manual online or anywhere. I think that maybe the function is absent in number.

  Then I return to MicroSoft Excel, that I have used for many years and I am sorry to say feel much more wysiwyg.

  Formulas in a numbers document cannot reference cells in other documents of numbers.

  "Much more wysiwyg" is another way to express what many of those who "used (MS Excel) for many years" expressed as "more intuitive. These two descriptions usually boil up to ' what I'm used to, ", which is also true in the other sense.

  Whatever the real explanation, the standard advice is "the tool that will do the job." If "the job" requires referencing values in a separate document, the numbers (alone and without the help of AppleScript) are not the best tool for this job.

  Kind regards

  Barry

• How to read the data of BLOB and save to the file system

  Hi friends.
  
  I have called DEMO table there image stored as a BLOB. now my requirement is to know how to read the data of BLOB and saved in the file system. is there a procedure
  to read the blob object and stored in the file system. pls suggest me with an example.
  Thank you

  HI - don't know what version you have, but have a read through this:

  http://www.Oracle-base.com/articles/9i/ExportBlob9i.php

  Hoek link is to import the blobs in the db, it is export, to a file.

• event recording refnums data types do not match

  Hi all

  I'm new to LabView and I need help. Here's the situation:

  I am trying to add a user event by using the function 'create a user event '. The output of the function 'create a user event' placed in a control "Event Reg Refnum" (do not know if it is a control), but see diag2.png. But as soon as I add the user, the thread event at the entrance to breaks "event Reg Refnum".

  I think I know sort of what the problem is, as stated in the context-sensitive help, where the 'Reg Refnum event' has only one data type, which is "User event - Quit Application event". The user event that I add, 'Event to end execution', is not in the "event Reg Refnum".

  The question is: how to extend to the Reg Refnum 'event' to include 'Event - event to stop executing user' to solve my problem?

  Can experts out there if you please help me?

  Yours,

  chati

  Hi chati,.

  the fastest way to do this is to cut the connection, create a control on the exit of 'register of events' and add this to the cluster instead of the original refnum.

• How to record the date in Sqlite in an Adobe Air application

  Hi friends,

  I make a flex Application Adobe AIR with SQLITE database, what I want save the Date in the following format DD/MM/YYYY text but in my TABLE, I gave the data type is DATE.

  It store the value as this Sun Dec 2 00:00:00 GMT + 0530 2012 I want to store the value in MM/DD/YYYY. How to do this?

  looking for a useful suggession.

  See you soon,.

  B.Venkatesan.
  

  Oops, didn't check my email several days who have not noticed your answer

  not to get a Flash Builder in my desktop

  But it should be:

  private var Totaldays:int;

  TotalDays = Math.Floor (Math.abs (date1. valueOf() -date2. valueOf()) / (24 * 60 * 60 * 1000))

  Beware of the date1.valueOf () returns the number of milliseconds since midnight January 1, 1970

  If you really want Totaldays to become a chain, then:

  TotalDays =String (Math.floor (Math.abs (date1. valueOf() -date2. valueOf()) / (24 * 60 * 60 * 1000)))

• How to declare the data type of a column in a select query?

  How can we give the data type of each column on the fly during the selection of rows in a query?

  the cast function converts one data type to another.

  The syntax of the cast function is:

  Cast ({expr |}) (subquery) | (MULTISET (subquery)} AS type_name)

  Select cast (22 August 2003 ' AS varchar2 (30))
  Double;

  Published by: b_ * August 12, 2011 10:08

• How to get the data type of an object?

  I have some custom classes, and I would like to make conditional function that behaves differently depending on the data type of the object. How can I do this?

  you could do something like

  var obj:CustomObject = new CustomObject();

  If (obj is Objetpersonnalise)

  {

  do something

  }

  or you could look at using getQualifiedClassName() or getDefinitionByName()

• JDev 10.1.3: ADF - how a record end date

  I'm relatively new to the ADF, but I have a question about a current record end. I have a table with a start and end on a record date. I created a method that allows the user to copy a record. I have a table read-only ADF, they choose the folder and click the copy button. It then displays an ADF form that allows the user to clone that record and make changes to it. The user can enter a start date for this record. Could someone point me in the right direction or provide certain documents how then can go back and end date the initially selected record with the date of departure just entered by the user? I thought that maybe I could override the doDML method in the object of the entity, but I'm not sure how to find the original record that the user has selected?

  Congratulations on getting the bits together, we will then look at your code.

  0) you are referring to the 29 attribute. This will get you in trouble if the attr index never gets re-arranged. Instead you could probably do something like:

  Line Fees001RowImpl = (Fees001RowImpl) getCurrentRow ();

  .. then you can refer to the line attribute accessor:

  row.getX () (where X is your name of the attribute... This assumes that you have created the class RowImpl for the VO).

  (with apologies, I had to guess at some of your names in classes here, so you need to tweek the names of classes to match your exact code)

  (1) why in endDateRecr() you call createRootApplicationModule()? This will create a separate transaction with the db and is probably the reason why you do not see your folder to refresh. If the client interface method is in your ViewObjectImpl, you should be able to simply call getApplicationModule(). Something like the following:

  AppModuleImpl am = (AppModuleImpl) getApplicationModule ();

  This should also give you the advantage you can now consult the Fees001ViewObject directly as follows:

  Fees001ViewObject vo = am.getFees001View1 ();

  .. ... who will isolate you from changing the name of the view object, you have hard-coded in the findViewObject call.

  (2) you are browsing the VO Fees001. Instead, you can use vo.getKey () to find your exact line (assuming that you have the PK).

  (3) you set the attribute to cost 2 + 3; similar to above, you could throw the charge line to an instance of Fee001RowImpl and then call the real setter methods provided for each attribute, isolate you from any changes to the index of the order of the attributes.

  (4) any reason that you are explicitly committed within the model layer method? This is similar to the argument that you should never commit within a pl/sql package database because it is not obvious to the appellant from the outside that this happens. Rather let the commit to your Interface ActionListener.

  I hope this helps. As I said it's a little difficult to give you the exact code I don't know the names of your object etc, but I hope it will be to steer you in the right direction.

  CM.

• How to return the data type complex of a synchronous BPEL process

  Hi all
  I have created a synchronous BPEL process, so a partner customer link was automatically created in the project. Now the link partner of this client is to have input and output variable of type normal string where as my BPEL process finally returns a complex data type.
  In order to solve this problem, I took a processing activity and mapped the collection [variable returned by my BPEL process] to the chain of production of the customer but in this way I just get a single string to store the entire collection but I want that they separately.
  
  Can someone tell me, how to manage this scenario.
  
  Concerning
  Lokesh

  After creating the partner link and the invoke (to create the variables), change the element type of the response message to the complex type definition of your collection that appears in the XSD. You can do the same thing if you want to change the element type of the payload of the request message as well.

• How to handle the data type DECIMAL MySQL converted to DOUBLE in OBIEE 10 gR 3?

  Hi all
  
  I have a problem in OBIEE 10g to I use the MySQL database as datasource direct to the server of the OBI and I have a column in a MySQL table which was designed as the DECIMAL data type (18.0).
  This column is used to measure a length, and values are included in seconds (without decimals), in the form as:
  "1200"
  in the MySQL database.
  
  After the import of the MySQL table associated with the repository of the OBI, the OBIEE converts the DECIMAL data type column to the DOUBLE PRECISION data type automatically.
  
  My goal is to reach the values in this form, certainly in the sense of the term (not at the time!):
  hh mm ss
  
  In order to accomplish, I tried to change the format of column with the ROUND function:
  ROUND (db.table.column / * 3600 * 2)
  
  The problem is that it doesn't work well if values can be divided with no rest for example
  original value: 7200
  new value (ROUND): 2
  
  In the case of my example:
  original value: 1200
  new value (ROUND): 0
  It's false, because 1200 seconds are not equal to 0 hours, I want to see two hours of _0.33333_ OR I much prefer more _0 hour 20 m_
  
  Anyone have any ideas?
  I tried to make a view of database and importing that type of CHAR data in the database, but is not the solution too, because if I filter BI app or try to make a SUM the BI would drop errors...
  
  Kind regards
  Laszlo

  Hello
  SE refer to this link, it is exactly will meet your need.

  OBIEE 11 g - change seconds in the format hh: mm: DD
  OBIEE functions

  Share updates... :)

  check if useful/correct...

• How to convert clob data type varchar2.

  Hello
  If select below questioning the data type must be varchar2 but I want to convert the text to a clob.
  
  
  Select 'World' of double;
  
  
  Kind regards
  Fame

  SQL> Select 'My_name is rajuvan' Vrchr,
  2       TO_CLOB('My_name is rajuvan') clb
  3      from dual; 
  
  VRCHR                          CLB
  ------------------------------ ------------------------------
  My_name is rajuvan             My_name is rajuvan
  
  SQL>
  

• How to set the date type date of work

  This is perhaps a silly question, but I can't seem to get the data type date to work for a member account. When I go to the planning application and choose an account I want to put in a date entry account, the web form seems to show that the setting of the date works for the account. I even put my account type to be saved hypothesis. For example, I expect to see the date formatted in 10/20/2009 when I enter this value in the web form under my account "Hire Date". I also checked the display options in the preferences of planning. If anyone knows if this function works even on 9.3 or 11.1?

  Hello

  Looks like you have not defined the order of evaluation of Auditors. Administration > Dimensions > evaluation order > select plan type > moving accounts to another window, apply.
  Try the form again.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to recover the data type of a column in a table?

  Hello
  
  I want to retrieve the data type of a column in a table. At the moment I'm querying attribute 'OCI_ATTR_DATA_TYPE', but it is SQLT_CHR varchar2 and nvarchar2 data type columns. I need to make a distinction between these columns of two separate data types. Y at - it all API through which I could get the exact data type of a column, i.e. "nvarchar2?
  
  Thanks in advance.
  
  Hashim

  Hello

  It is not a very direct way to do it. What you can do is to call OCIDescribeAny on the table that you want to get information. You can then get the OCI_ATTR_CHARSET_FORM attribute for the column. If the value of the attribute that you get is SQLCS_IMPLICIT, that would mean its a varchar/char/varchar2 column regular. If you get SQLCS_NCHAR, this means that the column is NCHAR. You can get the example of it here:

  http://download.Oracle.com/docs/CD/B14117_01/AppDev.101/b10779/oci06des.htm#446491

  Just look for the section "Recovering for a Table column Datatypes".

  Thank you
  Sumit

• How to insert 10,000 records test data into the emp table

  Hi I am new to oracle can someone please help me write a program so that I can insert the test data into the emp table

  SELECT       LEVEL empno,
               DBMS_RANDOM.string ('U', 20) emp_name,
               TRUNC (DBMS_RANDOM.VALUE (10000, 100000), 2) sal,
               DBMS_RANDOM.string ('U', 10) job,
               TO_DATE ('1990-01-01', 'yyyy-mm-dd')
               + TRUNC (DBMS_RANDOM.VALUE (1, 6000), 0)
                 hiredate,
               CASE
                 WHEN LEVEL > 10 THEN TRUNC (DBMS_RANDOM.VALUE (1, 11), 0)
                 ELSE NULL
               END
                 mgr,
               TRUNC (DBMS_RANDOM.VALUE (1, 5), 0) deptno
  FROM         DUAL
  CONNECT BY   LEVEL <= 10000