Everyone can print to the printer on the router

Similar Questions

• My HP Photosmart C309a printer can't find the router wireless 3 feet above him.

  My HP Photosmart C309a printer can't find the router wireless 3 feet above him.  I ran the diagnostics and got the message "the wireless radio does not work.  This device is the wireless radio?  In the router? In the printer?  I have reset the router is #6 with the printer, but I am still unable to connect my Macbook to the printer wirelessly.  My desktop Mac is connected to the printer with a cable and print well.  Is my router messed or my printer?

  Wireless radio of your printer (that it uses to communicate with the router radio) died.  Here's how to contact HP technical support: www.hp.com/go/totalcare

• Can I do the router uses an older Protocol of WIFI (WEP) with Lion?

  A colleague who I am to help got a new router, which wwas pre configured by the provider.

  Lions (Lions of Montain) on MacBook Air can connect to the Internet easily around my iOS 9 mobile (personal "hot spot").

  My 9 immediately connected iOS devices.   Although older OSX (Lion? ML?, I don't know with certainty at this time) does not work.

  They see the net in the most convenient airport and can fill in the PW and the 'antennas' in the menu shows good connection, although Mail and Safari (only available applications) report: no connection to the Internet.

  Perhaps the kind of connection is newer legacy systems can in itself.

  Can I do the router uses an older Protocol of the WIFI (WEP) with Lion on Airport?

  Can I do the router uses an older Protocol of the WIFI (WEP) with Lion on Airport?

  This will not change anything, except less secure your network.  The encryption method does not affect the rest of the internet connections, and you indicate that you are connected to WiFi.

  You can check if you have a valid DNS address

  System-> network-> advanced-> DNS preferences

  You can test your own DNS addresses by clicking on the [+] sign and adding something like

  OpenDNS.org

  208.67.222.222

  208.67.220.220

  Google DNS

  8.8.8.8

  8.8.4.4

  You could try running "Network Diagnostics".

  Finder-> go-> go to folder->/System/Library/CoreServices

  This should open a folder

  Double click on-> Network Diagnostics

  Follow the instructions.

• I have a HP officejet K-550dtn. New wireless n router. I can't get the router to see the printer.

  This printer used to work properly as a network using Actiontec or Linksys printer b/g router.  I upgraded my network for a 802.11n system and I cannot get the new router to see the printer.  After several hours of fighting, I find that the printer configuration page shows its IP address as 192.168.1.103.  Unfortunately, the DHCP server on the new router uses address 192.168.0.100 - 192.168.0.200 only.

  The disc that came with the printer does not work in one of my computers, because the BONE is newer than Win XP.

  Any ideas on how I can change the internal IP address of the printer to something the router will recognize?

  I wouldn't get rid of this printer, since it is always does a great job.

  (I can still print to the printer with a computer server network address to which it is connected by a USB cable, but requiring everyone goes up to this computer before making the print command in order to ensure that it is not hibernation.)  If I can't print directly via the router, I think I will return the router and go slowly until I can't take it anymore.

  Thank you

  Dweezel

  I finally understood that.  Here's how, in case someone else meets this.

  I don't mention that there is a Verizon FIOS router behind the wireless-n router, and it uses the model of 192.168.1.XXX.

  On a hunch, I ping the FIOS router, and there was a response.  The K-550 ethernet cable was plugged into the wireless n router and I tried it ping 192.168.1.103.  No response.  I then connected the ethernet printer cable in one of the connectors of the FIOS router replacement.  He ping again and got 4 beautiful quick returns.

  I moved to one of the computers on the wireless network and checked to see if the printer was there.  Joy!  There were two cases.  One was the connection recently configured via the USB port on the server computer.  The second was through the previously used x.x.x.103 port.  I can print using this forum, and I made it the default printer.

  It had not occurred to me to use a port across the wireless n router.

  Dweezel

• My HP Officejet 6500 E710a-f can communicate with the router or wireless access point

  I don't even know if my printer supports wireless or not there only ethernet logo on it and no wireless setting in its control panel as shown in the manual, I plugged on the router via a cable many years ago but now, for some reason, I need get the router of the printer if it can communicate with the Wireless router and if she can , how it will be, and to ensure in this... I have no parameters to talk wireless in the printer, but as I remember in his specification he supported wireless do not know if I got the wrong specifications or my printer is missing something.

  and it is my printer status

  Hello

  Unfortunately, it is not a wireless printer:

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/my-OfficeJet-6500-E710a-f-wont-print-wirelessly-Windows-7/TD-p/1820813

  Kind regards.

• How can I remove the routing details when I send a message?

  Something changed recently when I forward messages that the group includes now all the routing information detailed at the top of the message transfer. I must have turned on a flag somehow and cannot get rid of this detail. Can you point me to the right flag?

  Example;
  Return-path: < [email protected] >
  Envelope-to: [email protected]
  Delivery date: Tuesday, November 11, 2014 03:46:08-0700
  Received: from balistyl to box423.bluehost.com with local-bsmtp (4.82 Exim) (envelope - from < [email protected] >) id 1Xo8xT-0006iO-BN for [email protected]; Tuesday, November 11, 2014 03:46:07-0700
  X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on box423.bluehost.com
  X Spam-Level: *.
  X-Spam-Status: no, score = 1.6 minimum = 7.0 tests = BAYES_50, HTML_MESSAGE, RDNS_NONE short circuit only = no autolearn = no version = 3.3.2
  Received: from [103.7.168.77] (port = 41268 helo =dc - syd - mf01.domaincentral.com.au) by box423.bluehost.com with esmtps (TLSv1:DHE - RSA-AES256 - SHA:256) (4.82 Exim) (envelope - from < [email protected] >) id 1Xo8xQ-0006Z1 - 8 L for [email protected]; Tuesday, November 11, 2014 03:45:59-0700
  Received: from nskntqsrv01p.mx.bigpond.com (nskntqsrv01p.mx.bigpond.com [61.9.168.231]) by dc - syd - mf01.domaincentral.com.au (Postfix) with ESMTP id A786039DE7 for < [email protected] >; Tuesday 11 November 2014 21:45:48 + 1100 (EST)
  Received: from nskntcmgw05p ([61.9.169.165]) by nskntmtas02p.mx.bigpond.com with ESMTP id <20141111055718.ISEQ2564.nskntmtas02p.mx.bigpond.com@nskntcmgw05p > to < [email protected] >. Tuesday 11 November 2014 05:57:18 + 0000
  Received: from remote.firstchoicetraining.com.au ([149.135.14.3]) by nskntcmgw05p with BigPond out id E5xH1p00S03xRX1015xHag; Tuesday 11 November 2014 05:57:18 + 0000
  X authority-analysis: v = 2.0 cv = W5W6pGqk c = 1 DM = 1 a = ZlQmI0VWOOCI0Ws6zVKdGQ ==: 17 a = ZsEuN2HucSIA:10 a = xqWC_Br6kY4A:10 a = NZifWiTRAAAA:8 a = ZdxzAA3WAAAA:8 a = tAhQztOYpE5 - _p3fzmMA:9 = CjuIK1q_8ugA:10 a = RlVZHsz84L3Yuwrk:21 a = 4eQiezAsOuWnFgBe:21 a = yMhMjlubAAAA:8 a = SSmOFEACAAAA:8 a = sZ - XaGvAJqZVWXdCgWIA:9 a = gKO2Hq4RSVkA:10 a = UiCQ7L4 - 1S4A:10 = hTZeC7Yk6K0A:10 a = frz4AuCg - hUA: 10 a = lID3tNEZ8Rugzwej:21 a = - XcgZET6D6DevIHt: 21 a = I3BWqjX_LvlRkKUJ:21 a = Gv4F5cyaEarxA_pH0c8A:9 a = 1Vq_FK4TplAA:10 a = lhmTjsWS0RU4d0aX : 18 a = ZlQmI0VWOOCI0Ws6zVKdGQ ==: 117
  Received: From FCTSERVER.fct.local ([fe80::6e32:8 c 17: 2dd8:ccf2]) by FCTSERVER.fct.local ([fe80::6e32:8 c 17: 2dd8:ccf2 11%]) with the mapi 14.03.0210.002 id; Tuesday 11 November 2014 15:57:17 + 1000
  From: < [email protected] > mytraining
  To: [email protected] < [email protected] >
  Subject: RE: BSBPMG519A project management degree - status
  Thread-Topic: BSBPMG519A project management degree - status
  Thread-Index: AQHP / V + Fxq8U5FjJPEeXNkB0uTXQ7Zxa7cfg
  Date: Tuesday 11 November 2014 05:57:16 + 0000
  Message-ID: < [email protected] >
  References: < [email protected] > < [email protected] > < [email protected] > < [email protected] > < [email protected] > < [email protected] >
  In-Reply-To: < [email protected] >
  Accept-Language: en-US, fr - to THE
  Content-Language: en-US
  X-MS-a-Attach: Yes
  X-MS-TNEF-Correlator:
  x-originating-ip: [192.168.0.34]
  Content-Type: multipart/related; Boundary = "_004_529747600E41BB47A939ED14507261CCA6DA32FCTSERVERfctlocal_"; Type = "multipart/alternative".
  MIME-Version: 1.0
  X-identify-User: {0000:box423.bluehost.com: local: local} {sentby: delivered locally}
  X-identify-User: {2267:box423.bluehost.com: balistyl:balistyleportdouglas.com} {sentby:spamassassin for delivery to the user identified}

  The menu bar, select View-Headers-Normal

  No bar menu with view? Press the ALT key.

• Laptop can't find the router.

  Yes. First of all I'm not so technical so... I'm sorry. Fancy talk and internet would very likely confuse me.

  First of all, I bought a WRT54G2 router. Staples clerk assured me that I would be able to connect laptops to my sister and me to the internet.

  I've implemented exactly as has been charged by the CD, however when I on my laptop and "View available wireless networks", the router does not appear on the list. Despite this, I managed to connect my Nintendo DS to the internet. So... where the problem lies, and what do I do?

  Open an Internet Explorer browser on your wired computer(desktop/laptop) page. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the channel 11-2 wireless, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

• can not access the router (192.168.1.1) of the browser firefox web

  When I try to access my RV042G Gigabit Dual WAN VPN router from firefox or chrome I get an error message

  > An error occurred during a connection to 192.168.1.1. SSL has received a low ephemeral Diffie-Hellman key in the handshake message exchange the server key. (Error code: ssl_error_weak_server_ephemeral_dh_key)

  I had a similar problem with the storage attached network (Synology Diskstation) unit but I was able to create a certificate that meets the "modern standards" and the problem was solved.

  I need to create a new certificate for the web server on the router RV042G?  How?

  FYI - running firmware 4.2.3.06

  Thank you

  Lee

  Hello Lawrence,.

  Thank you for using the small community of Support Business!

  It is a known problem that affects a number of products for small business. There is another post which lies here who has some solutions you can try.

  If you have any other questions, please post them here and I'll do my best to help you!

  Best,

  Taylor

• can not find the router program uninstall belkin

  How can I uninstall the program from the router

  What diagnosis have so far?
  You searched for this issue or problem here @ replies?
  You have gooogled it?

  Please provide as much detail as you can.

  Before asking a technical question by e-mail or on a Web site forum, follow these steps:

  Try to find an answer in the archives of the forum on what you intend to publish.

  Try to find an answer by searching the Web.

  Try to find an answer by reading the manual.

  Try to find an answer by reading a FAQ.

  Try to find an answer by inspection or testing.

  Suggestions for asking for help on a site.

  http://support.Microsoft.com/kb/555375

  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• I can connect to the router but no internet connect windows 8

  I took each of boredom that my NEW HP envy provides however I still get a no internet connect error.  If I reset my router and checked that it is acceptable.  I can reset everything and internet will work for no more than 30 sec. I know that the internet is able to work as I plugged the ethernet cable, but I want it is wireless! What to do next! ?? !!

  Hello

  Check with HP Support, their online documentation and drivers, diagnostics,
  and ask questions in the forums about known problems.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ===============================================

  Note the use of Win Key + X and Win Key + W (to access control panel, run,
  and settings according to needs). Win + D key calls to the office and use
  Win Key activates / deactivates the desktop and start screen.

  --------------------------------------------------------------

  Control Panel - Network and sharing Center - solve problems

  References to Vista also apply to Windows 7 and Windows 8.
  
  Your router be guess here, you have successfully updated the firmware a possible
  solution? And I would update your WiFi drivers on computers. How far away are they
  you have set in the router? Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click
  top - tab of the driver - write version - click on update driver (can't do
  nothing that MS is far behind the certification of drivers). Then right click on the Wifi
  Device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Microsoft - How can Windows 8 - I fix the network adapter problems? (Do not forget to see
  This section-> update the NIC driver).
  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Drivers and Microsoft - Windows 8 - Hardware
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Microsoft - Windows 8 - why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Microsoft - Windows 8 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system Maker you can see the same device manufacturer
  more recent versions. (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other update
  Drivers Windows 8 like updated drivers.

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - set up a new connection or network

  -----------------------------------------------------

  And:

  TechingItEasy - how to join a Wi - Fi network in Windows 8 by MVP Andre Da Costa
  http://techingiteasy.WordPress.com/2012/06/09/how-to-join-a-Wi-Fi-network-in-Windows-8/

  Microsoft - Windows 8 - Web & Networking
  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Microsoft - Windows 8 - Wi - Fi & Networking
  http://Windows.Microsoft.com/en-us/Windows-8/WiFi-networking#1TC=T1

  -----------------------------------------------------

  Microsoft - Windows 7 - Why is my Internet connection so slow? (applies to Windows 8)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Microsoft - Windows 8 - wired and wireless in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• [WNDR4500] Can not reach the router by IP (WFAdevice)

  I just tried to get into the router with IP 192.168.1.1, but get the error that it is not connect?

  With my mobile and Fing app, I see the router as a WFAdevice?

  I have not changed anything with the router, so I don't understand what has changed and how to get back into the router?

  Just rebooted the router and all is fine now

• Is crushed, now I can not detect the router

  I was using vista when it crashed on me, and when I rebooted I found I couldn't connect to the internet more. I have not changed anything that lead to her or since, but poking around I know now that even if my computer is directly plugged into my NETGEAR DG834G router, it will not connect and recognize it, and still fire on the router for my computer is turned on. This isn't a problem with the internet as the other two computers attached to the router both of their internet works perfectly.

  I tried to disable my router and try other ports on the router and developed the default gateway had been erased. I added it back, doesn't have a HUGE repaired registry. I know this has helped in some was as now, when I try and connect to the internet, instead of instantly get an "unable to connect", he takes his time to try to connect.

  A quick response would be greatly appreciated I have several online things that NEED done.

  Hello

  Autoconfiguration IPv4 address: 169.254.188.3

  Means that you are not really connected to the router.

  Network controller Nvidia nForce #2 is a wired edge network card and should worl OK. Drivers cam is located on the page of the provider of computer assistance.

  Too wireless?

  Please do.

  IPconfig/all results.

  A type of command line Admin ipconfig/all > Desktop\Ipconfig.txt and press ENTER.

  Open the file Ipconfig.txt with Notepad copy and paste its contents into a pole.

  ---------------------

  Please read this again.

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block aspects of the Local traffic even it they are off (off) . If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• HP Laserjet Color mfp M175nw 100: How can I connect the router to secure network?

  How do you set the printer to connect to the network through a router password? Where would you want to enter the password?

  On page 43 of the technical reference software, it shows how to configure the wireless through the built-in Web server.

  This link also have other reference documents (manual, software reference technique, quick reference Guide and Setup Guide) that might be useful in the future.

• Satellite L505-10Z & L505-GS5039 - can connect to the router

  A few days ago that I buy two Toshiba Satellite L505-10Z & L505-GS5039 the two cannot connect WiFi.
  When I connect with the Ethernet cable it works but WiFi does not work.

  I use ADSL Linksys router and Access Point for internet access. Laptops are identifing WIFi connections and showing the strength too, but when I click on connect its not connecting. Please help me. I use Windows 7 Home Premium on two laptops.

  Mohd Mateen Siddiquie
  [email protected]

  Hello

  I had a similar problem that I couldn't t connect to my router with my new laptop, but the solution is easy enough: on my WLAN access point I enabled MAC address filtering here I must add my new laptop. After that, it was possible to connect! :)
  Check this box!

  Last but not least make sure also that you are getting an IP address from your router.

• How can I find the network name (SSID) and the chain of security for my network

  I have a wireless network with a printer on it - even if the printer is connected with a wire.  I want my laptop to be able to use the printer wireless to another room - instructions for putting in place early yb requiring the SSID and the security chain.

  Hi petetyler81,

  You can connect to the router manufacturer's website and make sure that the SSID and find the string, otherwise you can contact the manufacturer of the router and check.

  For more information, see the link:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Hope this information is useful.