Everyone in the House can connect wirelessly with the exception of my laptop wireless

Original title: Mr. gustavo

Hi can you please help me, everyone in the House are connected to internet wireless lapto, Im the only one can not get internet connection with my wireless lapto, can you please advice me. Thank you very much.

Rigards, gustavo

Hello

·          What happens when you try to connect to the network?

·          You get the error message?

Method 1: Try the procedure described in the following article:

http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

Method 2: Reset the TCP/IP settings:

To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357

Tags: Windows

Similar Questions

  • Laptop can connect wirelessly, but not through cable utp to the internet. Help!

    I tried to connect my computer laptop windows 7 to the internet using a utp cable. Unfortunately, without success. Works with wireless, but in my dorm, I cannot use internet via cable. I tried to turn off the wireless, but that did not work either the comouter does not recognize that the cable is already connected. Please help me solve this problem.

    Thanks for your help in advance! :)

    I would check the cable carefully.  Sometimes, some of the wires are loose from the plug.  See if the laptop can connect to cables in other places.  If possible, the problem is with the cable and not on your computer.

    Good luck.

  • Can connect wireless Compaq Presario SR5214X desktop PC?

    Hello

    I have a Compaq Presario SR5214X desktop PC. Can I connect wirelessly to the network with it? Have you looked online and I refuse to pay support to meet a simple Y / question N can I connect wirelessly to my router?

    Concerning

    Hello

    Your PC does not come with a wireless adapter, but you can certainly install one in a free PCI slot: these are the white horizontal slots shown in the bottom left of your motherboard is an example of the type of card, you need to install on the link below.

    Wireless PCI card

    Kind regards

    DP - K

  • Can connect to with the bad IP and the subnet RVS4000

    Hello

    I'm relatively new to networking so that post in the forums, please be gentle. I have a strange problem. I tried to update our switch of production over the weekend with a new Gigabit switch. Everything was going well after the change and the network has been a significant change in speed.

    But when I came back Internet was down on Monday. So I tried the switch troubleshooting to see if there was a loop or something like that and put in managed mode so I could watch the config page and enjoy the function STP. When you try to access the config page I entered the default IP address in my browser and a connection appear so I tried to connect and she didn't then I noticed that the title of the tab navigator says RVS4000. So out of curiosity I put the creds for the router and here let me the router.

    The router has a static IP address and use a different subnet, then the default IP to 192.168.2.1 with switch. I put the old switch and removed a new production, but can still get to the router with IP, it is the static address and address 2.1.

    This before everyone knows or knows what I could possibly hurt? The fool is now the switch is made of bricks. I have a new future, but have need solve this problem until I put it into production.

    Thanks for any help, sorry for the novel.

    Hi Chris, it is possible that someone has set up a VLAN on the router. All ip addresses VLANS are IP management for the unit. You can check the L2 switch of the device tab and this is not the case. You can also verify that the vlan 1 router is that you are pregnant.

    -Tom
    Please evaluate the useful messages

  • I can connect wirelessly to the network, but cannot connect to the internet.

    Ethernet to wireless connection?

    Hello. I have a Dell Dimension 2400 desktop computer and bought a 50M USB WiFi Wireless LAN 802.11 n/g/b adapter so that I could move my desk in another room and a wireless connection.  I was able to connect it to my wireless printer but am not able to connect to wireless internet.  Is this possible with this computer? If so, how?

    Hey DLD

    Try this link. A lot of good things that have worked for me.
  • HP G60 - 117US LAN adapt will not connect. Vista Ultimate. Manager displays without problem. Can connect wirelessly. Use Nvidia MCP77MV chipset__

    My laptop will be wired adapter not connecting, Device Manager shows no problems

    Hi Baker,

    (a) if it works well before? You get a specific error message?

    (b) don't you recall making any changes to the computer before this happened?

    Connect the laptop to access the internet cable and then try to follow the steps:

    Step 1: check if you are able to receive the IP (Internet protocol) address, run Ipconfig/all at the command prompt.

    Click Start, run, type "cmd" (without the quotation marks), and then click OK to open a MS-DOS command line window. Type "ipconfig/all" (without the quotation marks), and then press the ENTER key.

    ·         Do you have an IP address?

    ·         You get the addressing APIPA (automatic private IP addressing)?

    Ø If the line "Autoconfiguration Enabled' says 'Yes', the 'Auto-configuration IP address' is 169.254.x.y (where x.y is the unique client identifier), then the computer is using AUTOMATIC private IP addressing.

    Ø If the line "Autoconfiguration Enabled' says 'No', while the computer does not currently use AUTOMATIC private IP addressing.

    Note:  With APIPA, DHCP (Dynamic host configuration protocol protocol) clients can be automatically configure an IP address (Internet protocol) address and subnet mask when a DHCP server is not available.

    If you cannot assign an IP address and then try step 2

    Step 2: disable the DHCP (Dynamic host configuration protocol protocol) Broadcast Flag:

     

    Run the fixit available in the link below to disable the DHCP broadcast flag

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

    http://support.Microsoft.com/default.aspx/KB/928233/en-us

     

     

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows

    http://support.Microsoft.com/kb/322756

     

    Let us know if it works

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • can I use with my account on two laptops at the same time?

    I tried to open ps on the second laptop, I only get trial, but I bought the monthly package for her. It works fine on the other laptop

    Hello

    Please check the help below document:

    Applications creative Cloud back in test mode after an update until 2015 for CC

    Kind regards

    Sheena

  • Cannot ping the default gateway with Centrino Advanced-N 6235 on XPS 12 but CAN connect to the Internet

    I have a XPS 12 with an Intel Centrino Advanced-N 6235 wireless card.  I can't ping the default gateway with the wireless card.  When I use a USB network adapter, I can ping the default gateway for the wired connection.  I can connect to the Internet and the internal network with the wireless card and can ping other computers on the network.  I am trying to run a program to connect wireless to a projector.  I have two different programs for the two different projectors.  I can connect by cable but not wireless.  I think that the problem is anything that does not make me a ping of the default gateway or something on the wireless card.  I have a 10 latitude with a Broadcom wireless card that is connected to the same access point and can ping the default gateway and can connect wirelessly to two projectors.  They all have two windows 8 Pro.

    I downloaded the new drivers from Dell, uninstalled, reinstalled, tried to update Windows install the drivers, all with no success. Any ideas?

    The solution of the problem by chance.  I was connected to the computer with a different network than what has been used to authenticate user account on the wireless.  When I switched the user account for the user account that was logged on to the computer was the same who authenticate to the wireless, it worked.  Go figure!

  • Can connect you wirelessly on a Pocket PC V36?

    I have a Pocket PC V36 and I was wondering, how can connect wireless to this topic? This is the version 4.20.1081 and the 2003 version.

    Hi rafty12,

    You will need access to the phone user's guide to learn how to configure it, see the link below to download the user guide on the site to view sonic.

    http://ViewSonic.PT/support/mobilewireless/PocketPC/pocketpcv36/#features

  • How to create a Web site that users can connect to?

    Hey guys

    How to create a Web site that users can connect to?

    How to create a site that users can connect to with steam, facebook, twitter, etc...

    See this discussion where a similar topic was discussed.

    Login using Muse and British Colombia page

    Thank you

    Preran

  • I can connect to wifi everywhere, but at my house from Beach-Iphone 5 s - is not the wifi because I am about this with other devices

    I can connect to wifi everywhere, but at my house from Beach-Iphone 5 s - is not the wifi because I am about this with other devices

    General suggestions for Wi - Fi problems, maybe one of them will help you... especially #4.

    (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

    (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

    (3) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

    (4) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

    (5) disable the prioritization of device on the router if this feature is available.

    (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

    (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

    (8) to restore the device (ask for more details if you wish).

    https://support.Apple.com/en-us/HT201252

    (9) go to the Apple Store for the evaluation of the material.

  • problem with express mini pci wireless lan card. I can't connect to internet via wifi but I can connect to the internet via cable.

    Hello! I have a problem with my card express 11 b/g/n wireless lan mini pci because I can't connect to internet via wifi but I can connect to the internet via cable. whenever I try to connect it repeat to myself that there is a problem with your wireless network card. I tried troubleshooting, uninstall and reinstall the program, but always the same result. I'm updating too but still the same thing. I use a windows 7 Professional on my Lenovo 412. can someone help me? Thank you!

    Hello

    Method 1: I suggest you to follow the instructions of the link to solve the problem of network card:

    How can I troubleshoot network card?

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

    Method 2: Troubleshoot wired and wireless in Windows network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Reference: http://forums.lenovo.com/t5/R-and-L-Series-ThinkPad-Laptops/L412-Wireless-Automatically-Disables/td-p/264447

    You can also post your question in the forum of Lenovo to get help:

    http://forums.Lenovo.com/

  • I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router. Can someone help me with the settings that could take care of this problem?

    I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router.  Can someone help me with the settings that could take care of this problem? I have a Dell netbook and a laptop HP working with the router so I know it works.  The Nook also works in a Barnes & Noble store it seems so that the works of Nook.  I have a similar problem with a LG Vortex phone where I can't do the wi - fi connection.

    Please post on the Support forums technical Nook for help because it is not a Windows 7 problem...

    http://bookclubs.barnesandnoble.com/T5/nook-technical-support/BD-p/nooksupport

    .. .also than that...

    http://www.barnesandnoble.com/u/nook-support-connectivity/379002491/

    Don't forget the network encryption type, IE. WPA2/WPA and key/password / password must match the wireless router/access point.

    See also this about WPA2 on the MN-700...

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-connect-to-MN-700-wireless-router/1789978f-7C90-4686-A956-2d17eb79960d

  • My toshiba satellite pro is connected wireless through a 3g dongle but I can't seem to print on my epson BX600FW printer despite the use of the ad-hoc method

    I am really struggling to connect and print wireless. I rang EPSON who suggested that I connected using the AD-HOC method. This method applies to the use of a laptop computer and a wireless printer but without router.

    You are therfore impression on an AD-HOC (as and when) basis.

    I followed the instructions and created an AD HOC network. The 3g dongle works wirelessly and I can use internet. He told me that the signal strength is excellent. But when I try to print there is no answer. He just informed me that there is no network connection.

    I've been around the houses of connection / disconnection to nothing does not. If I tried to remedy the situation from now until midnight, I'd be no closer. Me, that I tried to believe you. So folks, has anyone got any ideas? If I thought that buying a router, that it would be useful, I'd be out immediately and buy a.

    Any notice received with gratitude. Thanks in advance.

    Hi charleskeen,

    ·         What operating system do you use?

    ·         Have you ever been able to print before?

    Some printers require the initial Setup wired print wireless.

    Make sure you have the latest drivers as well.

    http://eSupport.Epson-Europe.com/ProductHome.aspx?LNG=en-IE&data=YZnBT5wk60ZjizmYmgWduFmKu3QiLmBK&TC=6

  • VM XP not connect wirelessly with the home network or wireless printers

    I'll start with the problem and ask anyone and I'll fill in what information (drivers, programs, etc.) are required to complete the problem and I hope that we will find a solution together!

    I have Windows 7 64-bit (professional course) and it was installed with the Office of the virtual XP computer 2 years ago. It runs in a SONY laptop VAIO VPCS111FM, with core i5 model. Seagate 500 GB HARD drive. 2.5 GHz, 4.0 GB of RAM.

    The problem is that all the other computers I have (running XP, Mac, iPad, etc.) are all able to connect wireless internet and printing using the home router (Mac Airport Express) (yes I know right way was the other way around, but too late, too much money and time spent in the wrong direction). Windows 7 of course works in the laptop for two HP printers wireless, but not the XP Virtual Machine. Nothing can be printed off the coast of the XP to every CV (6500 has more (too advanced in any case) or the printer HP Officejet 8500 wireless.

    Of course, you know why I'm here. Help SONY expired, Best Buy, which has installed the purchase and we admit, Windows 7 Professional 64 bit and also installed the Office XP (it's their very very first download this system, because I know they spent over an hour on the phone with Microsoft (I had to prove that I was, the owner, before they would talk to Best Buy)) , installation and there is 2 years back and they always say nothing is wrong and we will charge for the search under the name of all the guarantees and free assistance have expired. Of course the last wrinkle is that Microsoft is now in charge me $100 just to answer the question of why his doesn't like his "XP" and even if its share of Windows 7! its still "XP" and gets load!

    HP was great and discovered that the IP Code starts by (if all goes well to say don't compromise the first three digits protection WEP ISP we have 192 for the XP VM, while everything (including MAC and iPad) everything starts with...) 10.! and have done all these years, we have had the system wireless installed (since 2004).

    Can someone help me get my XP connected wireless? What's wrong? What is missing?

    Furthermore, the Ethernet card is this green icon and no question mark or anything in the XP VM except 5 weird listed as "other devices." In Device Manager is NICs: Intel 21140 - based PCI Fast Ethernet Adapter (generic). In the section "Other devices" are: 5 copies of 'Virtual PC intégration Device' air conditioned and have question marks still under "Properies" and "Device status" all say "this device is working properly" no clue as to why mark her quesiton showing! Sequel to "Troubleshooting" only me ends with "contact the manufacturer or installer etc., which means significant costs because there is no more free ride or ensure the installation after 2 years!

    I hope this helps everyone!

    If I install a program that requires the Internet it can NOT find the internet on its own! (i.e. put HP program or other small program that I tried to install my XP needs the 'internet' else to register before using it!).

    BUT THANKS to YOU all! While searching for information complete this application I hit the tab of "USB" top XP VM and unknown device (my DVD?) and HP 8500 printer could be installed via "USB" so at least for the FIRST TIME in 2 years they are printing and working on the USB cable! This isn't a separate DVD, but the one inside the laptop. Sometimes, it works on the XP desktop, most of the time I navigate the DVD disk and force the autorun from running by using "RUN" in the start menu. I still don't know what happens if I spell (or close safely) the peripheral attached USB (printer) or if it will tie next time without putting in place (he has created four more settings of printer/fax machine (series 2!) on my list of printers.) I don't know what is happening, but its nice to see a page out of the "Notepad"or "wordpad" for the first time in two years! ".

    Now, all I need is to happen wireless!

    Thanks to all who read this far! Great thanks to all those who wish to help!

    Hello

    You can display the query in the link provided for assistance:
    http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

Maybe you are looking for