Example of C API communication LIN
Example for FLAX XNET uses no mode 'nxMode_FrameOutStream' or 'nxMode_FrameINStream' to 'nxCreateSession '.
Does this work in the context of LIN mode? If only they used to create the session for the same Interface?
I use ": memory:" in my database.
Can I get an example of work to help ": memory:" as of the databases with the mode 'nxMode_FrameOutStream' or 'nxMode_FrameINStream '?
Hi mahajan24,
The XNET Hardware and software manual discusses the use of Frame Output Stream Mode with LINEN, so it would be interesting to look into methods that they discuss. I have included a link to the page in the manual. Values of LIN frame transmit on the network in operation when XNET write is called. It is recommended to use XNET write (LIN frame), but you can also use XNET write (Raw image) for more advanced applications.
Frame Mode output stream: http://www.ni.com/pdf/manuals/372840k.pdf#page=93
Examples of shipping more focused on getting started you, you can try using the Output Stream Mode setting and change until inspired to look at how other examples of output are implemented.
In addition, regarding the error you see, this could be because your device needs an external power supply. LIN usually requires the bus power. What specific chassis PXI and LIN / other cards do you use?
Lauren
Technical sales engineer
National Instruments
Tags: NI Products
Similar Questions
-
Example of API: update line, selling price
Hello
Context: EBS 11.5.10. Level price (No. Advance Pricing)
I would be grateful if someone could send an example of the API used to update customer unit sale price of command line.
Currently, we use oe_order_pub.process_line, the problem seems that no adjustment is generated by the API (as it does to manually update the price of the line).
Thanks for your help
Concerning
AntoineYou can do it through
oe_order_pub.process_order
API. The following parameters are useful when you pass the info to fit for a sales order.
l_adj_rec.list_header_id := 8988; -- Modifier id l_adj_rec.list_line_id := 16596; -- Modifier line id l_adj_rec.automatic_flag := 'N'; l_adj_rec.list_line_type_code := 'DIS'; -- Change this if it is a surcharge, pass 'SUR' l_adj_rec.arithmetic_operator := 'AMT'; -- Percentage or amount l_adj_rec.operand := 10; --How much? l_adj_rec.operation := oe_globals.g_opr_create; l_adj_rec.line_index := 1; l_adj_rec.update_allowed := 'Y'; l_adj_rec.applied_flag := 'Y'; -- Rhis is required to change the price of the line l_adj_rec.change_reason_code := 'MANUAL'; l_adj_rec.change_reason_text := 'Manually applied adjustments';
Also at the level of the line, the following parameter should be checked.
p_line_tbl (1) .calculate_price_flag: = 'P '.Check out the following MOS notes:
How to use the OE_ORDER_PUB. PROCESS_ORDER Api for manual adjustment or application of freight? [959783.1 ID]
Can use an oe_order_pub.process_order API to create a new order line with a different price than the sale price list? [1072272.1 ID]
Pricing of the API to check if a modifier line qualifies for a sales order line id [ID 1220034.1]
Processing order API - how Scripts [ID 1265721.1]
FAQ on the command import [ID 1275116.1]
Process of PLC control in the management of orders [ID 746787.1]
Order API - errors / problems [ID 1266249.1]For details, please see the following threads:
https://KR.forums.Oracle.com/forums/thread.jspa?threadID=684887
https://KR.forums.Oracle.com/forums/thread.jspa?threadID=1122898See you soon,.
ND
Use the buttons "useful" or "correct" to award points to the answers / mark the thread as answered, if your question is answered. -
Align 45 does not... Just noticed I can't align a line at 45 and 90 degree angle with a line (for example to draw a straight line with SHIFT tool, select and maintaining line, shape is not hang at increments of 45 as it was by default) it notes still works with forms & text etc, but not with a straight line. Having downloaded the latest January 14, 2016
Last update fixed this Glitch, Illustrator please :-)
-
symbol to create and animate (example of the API work doc?)
May be missing something simple, but it doesn't seem to work and it is just out of the API doc
new movie of edge.
make a rectangle - convert to symbol with the name 'kitten_paw '.
remove from the scene
Paste this code in the timeline (for example to 1000)
sym.createChildSymbol ("kitten_paw", "Stage");
var kitten_sym = kitten_paw.getSymbolElement ();
kitten_sym. Animate ({opacity: 0}, 500);
It creates the object but does not - animate and console returns an error - error edge.2.0.1.min.js:162Javascript in the handler! Type of event = timeline
Am I missing something?
Thank you!
Try this:
var kitten_paw = sym.createChildSymbol ("kitten_paw", "Stage");
var kitten_sym = kitten_paw.getSymbolElement ();
kitten_sym. Animate ({opacity: 0}, 500);
-
Example the SOAP API for Lab Manager in c# required
Hi, I need to write a small program in c# that will deploy a short list of configurations of the library by name. I read in the guide to the SOAP API to update and tried all of the sample code, but no matter what I can not do the example of code to compile. I use Visual Studio 2008 and you added the WSDL reference correctly. The code contains only errors. He is Director of the laboratory 3.0.2 as well. Just one example showing me how to deploy 2 configurations by name would be greatly appreciated, thank you in advance.
Here is a very simple example, tested on LM 3.0.2 which gets a configuration by name and deploy it.
-
Hello
Someone at - it experience in integration with biamp nexia VC for codec C90? I can't telnet in RS232 port and run the command but not with nexia VC command line.
Because we do not know what 'symbol' command line representing "enter" in the PC telnet session.
Enjoy you can share with me information on it.
DV
OK, "\n" is equivalent to 0x0A in hexadecimal.
Happy that the issue has been found
-
Example of time-stamped .vi line graph (Excel) does not work on my PC
In the lower right corner of the image is the name of the required toolbox - Report Generation Toolkit.
-
Add the registry automatically possible shift? (LIN communication)
Hello world
I'm working on an automatic communication LIN program. Because of the different number of the signal in different frames come with the following problem.
I caught signals and turned them to the physical values, but can't they presents separately and not always no idea how to. Because if the database file changes, signal and image numbers will change. To make the problem clear, I post a photo as a result, as you can see, I want to present the results of the tests in real time, but I don't know if it is possible to add the registry to offset automatically. I want to hear if you guys have a good idea? Thank you in advance.
Best regards
Melon
You should not be the design of your application in this way. Think encapsulation. You can have clusters of berries of the clusters of the table etc, and you can also have items that can have objects inside etc.
In this way, you need to get to a design which has all your data in one thread that can be accessed by the subVIs (or methdos of the class). So if you want to update a single signal you can find it in a single cluster (or object) and update it.
-
Looking for Eloqua example API Code loading mass Contacts in the Contact Group
I'm looking for examples of Eloqua API .NET code to bulk load 10 000 + contacts in the Contact Group. Please help if you have done this before.
Thank you!
David
Hi David,
I recently published an article on The import of Contacts in lists by using bulk API. I hope it will be useful.
Thank you
Fred
-
How to run Bluecat API calls with a Scriptable task in vRO 6
Throw it to the community for tips. I'm still VERY new to javascript & vRO.
I have vRO6 running with the Plugin from the IPAM Bluecat up and running with the actions of out-of-the-box & plugins. Large.
What I am struggling with, it's that I am creating tasks that contains custom script that can do 'other' things listed in the Handbook for the Bluecat API... Looking at the guide, some things are easy, but others make absolutely no sense to me.
An example of what I don't understand is the sequel... the API guide will show a specific example to the api java code, but it does not explain how to do this in a scriptable vRO task.
Update in Java:
APIEntity area = service.getEntityById (area ID).
Properties EntityProperties = new EntityProperties (zone.getProperties ()); Fill with the existing values and then update the only properties that need to be changed.
properties.addProperty ("TextUDF", "testTextValue");
properties.addProperty ("IntegerUDF", "1005");
zone.setProperties (properties.getPropertiesString ());
service. Update (area);
So it's 6 lines of code, but the execution of that api call vRO Bluecat seems to expect a single sector of something like this:
result = BCNProteusAPI.call (profileName, "method()", args);
I don't make any sense? Any guidance here?
Thank you!!!
The version of the plugin available on SolutionExchange seems to expose a script object unique vRO BCNProteusAPI that acts as a proxy for Proteus service calls. Thus, the Java method calls that look like service.someMethod (args) should be directly translatable to scripts of calls BCNProteusAPI.call (profileName, "someMethod", [args]); For the example you provided, calls Java
APIEntity zone = service.getEntityById( zoneId ); service.update(zone);
may arise in the vRO as scripts
var zone = BCNProteusAPI.call(profileName, "getEntityById", [zoneId] ); BCNProteusAPI.call(profileName, "update", [zone]);
Unfortunately, the other Proteus API objects, like APIEntity, EntityProperties, etc., are not exposed as vRO scripts of the objects, which can cause problems if some service API requires such object as an input parameter. You will probably be able to pass this object returned by a call to service as input to another call from service (such as area in the example above), but you may have problems to instantiate them directly (like EntityProperties in the Java code example).
You can contact BlueCat for info, why not not all objects are exposed as vRO script objects and how they recommend to use these objects.
-
analog output digital start trigger the api c
Hi, I'm trying to start analogue output based on a digital trigger (either PFIO or a PXI line) I can make this easy in LabVIEW. However with the C API (through the Python wrappers), the problem is when I call DAQmxBaseWriteAnalogF64, writing will always be timeout that the acquisition was not triggered. However, I can't call it after the trigger occurs, because obviously, it will be too late.
I can't find any examples of C API where the analog output is triggered a digital triggering. I can find for the analog input, but is fundamentally different that you can CONV read anytime after the trigger occurs.
Python code as follows (functions are equivalent ot C API, even if you have no need of ot pass the task handle such that it maintained as part of the Task object)
# create analog output task analog_output = Task() analog_output.CreateAOVoltageChan("Dev1/ao0","",-10.0,10.0, DAQmx_Val_Volts, None) analog_output.CfgSampClkTiming("",outputRate, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, numSamples) analog_output.CfgDigEdgeStartTrig("/Dev1/PFI0", DAQmx_Val_Rising) analog_output.StartTask() analog_output.WriteAnalogF64(numSampsPerChan=numSamples, autoStart=False,timeout=1.0, dataLayout=DAQmx_Val_GroupByChannel, writeArray=data, reserved=None, sampsPerChanWritten=byref(samplesWritten))print("Analog output: Wrote %d samples" % samplesWritten.value)# create digital trigger dig_out = Task()dig_out.CreateDOChan("Dev1/port0", "", DAQmx_Val_ChanForAllLines) # create digital trigger function highSamples = 1000 numpts = 3 * highSamples doData = np.zeros((numpts,), dtype=np.uint32) doData[highSamples:2*highSamples] = 2**32 - 1 # send digital trigger doSamplesWritten = c_int32() dig_out.WriteDigitalU32(numSampsPerChan=numpts, autoStart=True, timeout=1.0, dataLayout=DAQmx_Val_GroupByChannel, writeArray=doData, reserved=None, sampsPerChanWritten=byref(doSamplesWritten)) print("Digital output: Wrote %d samples" % doSamplesWritten.value)
Hi PatrickR,
You can review examples of code NI-DAQmx (ANSI C) text based on the production of an output using a trigger to start digital analog. If you included/checked support textual dusing your NI DAQmx driver installation, you can navigate to Windows start > all programs > National Instruments > NI DAQ > Teaxt-Based Code support > ANSI C examples > analog output > generate voltage > Mult Volt updates-Int Clk - Dig start. If you have questions/doubts about the material.
-
Paragraph style, first line "BOLD"
Hi all
I try to give a column in a table definition in which the first line is "BOLD" and the rest of the cell is not, like this:
---------------------------------------------------------------------------------
2 3 column cell
Name of the company
AddressAddress
2 4 column cell
Name of the company
AddressAddress
---------------------------------------------------------------------------------
I don't know if this is even possible, but it would be a great help.
I apply the paragraph as follows to the second column:
---------------------------------------------------------------------------------
myTable.columns [1].cells.everyItem () .texts [0] .applyParagraphStyle (contentText);
---------------------------------------------------------------------------------
Here's the paragraph contentText:
---------------------------------------------------------------------------------
contentText var = myDocument.paragraphStyles.item ("contentText");
Try
{
var contentTextName = contentText.name;
}
catch (MonErreur)
{
contentText = myDocument.paragraphStyles.add({name:"contentText"});)
}
contentText.appliedFont = "Arial";
contentText.fontStyle = "Regular";
contentText.pointSize = 10;
contentText.spaceAfter = 10;
contentText.spaceBefore = 10;
contentText.fillColor = myDocument.colors.item ("Black");
---------------------------------------------------------------------------------
Is there a way to leave only the first line to be bold?
Thanks in advance,
Greetings
Hello
You can work with a line for your paragraph style style, if your lines of text are not separated by the sign of paragraph as in a good example shown here:
If your text is composed as in the example on the left using signs of paragraph, you need a paragraph style distinct for the first paragraph with Arial Bold.
As already noted Willi Adelberger.
Example for adding a nested line style:
var doc = app.documents[0]; // Your paragraph style name that later should contain a line style: var paraStyleName = "contentText"; // For defining a line style we need a character style: var charStyleName = "FirstLineBold"; // All properties for the paragraph style: var paraStyleProperties = { name : paraStyleName , appliedFont : "Arial" , fontStyle : "Regular", pointSize : "10 pt", spaceAfter : "10 pt", spaceBefore : "10 pt", fillColor : "Black" }; // All properties for the character style we need for the line style: var charStyleProperties = { name : charStyleName , fontStyle : "Bold" } // Check, if the needed styles are there: // The paragraph style. // using IS NOT VALID is recommended if(!doc.paragraphStyles.itemByName(paraStyleName).isValid) { var paraStyle = doc.paragraphStyles.add(paraStyleProperties); } else { var paraStyle = doc.paragraphStyles.itemByName(paraStyleName); paraStyle.properties = paraStyleProperties; }; // The character style. // using IS NOT VALID is recommended if(!doc.characterStyles.itemByName(charStyleName).isValid) { var charStyle = doc.characterStyles.add(charStyleProperties); } else { var charStyle = doc.characterStyles.itemByName(charStyleName); charStyle.properties = charStyleProperties; } // At this point we have a valid paragraph style and a valid character style. // Now let's add a line style. /* Note and warning: In case the paragraph style already has one or several line styles we have to either remove them to get our new line style at "pole position", because there is no move() method to bring a new line style up in the stack of line styles. Or we have to redefine the first line style. Which is done below. About removing line styles: Tested and is not working with CS6. Could be a bug. paraStyle.nestedLineStyles.everyItem().remove() So I think it is best to loop through and remove them one by one. */ // Redefining the first line style if there is already one. // Else add a new one. // Note: Using the properties-property is not working here: if(paraStyle.nestedLineStyles.count()>0) { paraStyle.nestedLineStyles[0].appliedCharacterStyle = charStyle; paraStyle.nestedLineStyles[0].lineCount = 1; } else { paraStyle.nestedLineStyles.add({appliedCharacterStyle : charStyle , lineCount : 1}); }
For DOM documentation, see the following sources:
Jongware:
Gregor Fellenz:
InDesign ExtendScript API (8.0)
InDesign ExtendScript API (10.0)
InDesign ExtendScript API (11.0)
Kind regards
Uwe -
problem creating oscustomisationspec from the command line
Hello
I have a problem when you create or modify a command line oscustomisationspec
If I change the administrator password or domain password I have a problem when you use the customisationspec
error is cannot decrypt the password
the public key in the specification does not match the public key of vcenter...
When I create this oscustomisationspec of my xp machine I have no problem
When I create my Management Server I have the problem
and when I create it from the vcenter itself I have the question too
I don't understand why I'm using the right button of my computer and not a server
If I create the customspec of the client vsphere vcenter or on the management server, it works well
Another thing
If I export customization of my computer the plain text for the password value is false
If I export the customization of the server the value of plaintexst is true
my machine is xp
the waiters are win2003 and win2008
can anyone help?
Hello, DanielSoares-
This could be linked to the bug referenced in the thread to the http://communities.vmware.com/thread/297748. Here, broedi and vitalibaruh done by are the property of plain text for passwords in the spec is set to $false instead of $true when. They discuss this issue when using New-OSCustomizationSpec to clone an OSCustomizationSpec, but I got the same behavior you describe when you create a new persistent by using New-OSCustomizationSpecOSCustomizationSpec.
In the thread (the post to http://communities.vmware.com/thread/297748?start=18), vitalibaruh (from the team of PowerCLI) mentions that he's filed a bug for this behavior.
So for now, the solution seems to be to create the OSCustomzationSpec via the vSphere client and, if you want to work with a copy of the spec (to add/modify credentials, for example), use the API to clone the spec (via the DuplicateCustomizationSpec() method) and then use Set-OSCustomizationSpec to make changes to the clone. I've posted an excerpt on the use of this method twice in this same thread.
Is not ideal, but that market. I hope this helps.
-
Data pump API HR skills profile
Hello
I use the API of data pump for competence as below to load data in the HRMS table per_competence_elements base competency profile.
Hrdpp_Create_Competence_Elemen.Insert_Batch_Lines (parameters...)
It is properly inserted in the records to the table of data lines batch but when pump process lines for competency profiles record and call APIs skill which is hr_competence_element_api.create_competence_elements
from there, I get the error of process data pump line-> ' you must enter a jurisdiction and date of when you set up a skills profile. "
Can someone help me on this? I was wrong this error for a few weeks.
Example Data Pump API for jurisdiction and parameters that I passed in:
Hrdpp_Create_Competence_Elemen.Insert_Batch_Lines (p_Batch_Id = > Get_Batch_Id (p_Batch_Name),)
p_data_pump_business_grp_name = > "Seagate Technology,"
p_User_Sequence = > 5,
p_Link_Value = > Get_Link_Value (p_Seq_Num).
p_Type = > "STAFF."
P_EFFECTIVE_DATE_FROM = > l_Date_Acquired,
P_EFFECTIVE_DATE_TO = > l_Date_Acquired,
P_ATTRIBUTE1 = > l_School,
P_ATTRIBUTE2 = > l_GPA_Honors,
P_ATTRIBUTE3 = > l_School_Country,
P_EFFECTIVE_DATE = > To_Date (Trunc (SYSDATE)).
P_STATUS = > "ACHIEVED."
P_COMPETENCE_NAME = > l_Competence,
P_RATING_SCALE_NAME = > 'Education ',.
P_RATING_LEVEL_NAME = > l_Name);
Thank you.
Since then, Chin Ping
Published by: user11368704 on January 29, 2011 07:50This error message is HR_51670_CEL_PER_TYPE_ERROR, which is mentioned in the line API Manager per_cel_bus.chk_type_and_validation. It uses this condition to determine if this error is to be triggered. If this is TRUE, this error is raised:
If ((p_person_id est NULL et que p_party_id est NULL) - fusion HR/CWA)
P_competence_id is NULL
P_effective_date_from is NULL
P_competence_type is not null
P_assessment_id is not null
P_assessment_type_id is not null
P_activity_version_id is not null
P_enterprise_id is not null
P_organization_id is not null
P_job_id is not null
P_valid_grade_id is not null
P_position_id is not null
P_parent_competence_element_id is not null
P_group_competence_type is not null
P_high_proficiency_level_id is not null
P_mandatory is not null
P_normal_elapse_duration is not null
P_normal_elapse_duration_unit is not null
P_sequence_number is not null
P_weighting_level_id is not null
P_rating_level_id is not null
P_competence_type is not null
)
thenBy looking at your data maybe pump API call would help:
(1) pass p_person_id
(2) pass p_competence_id instead of p_competence_nameWhat is the deal?
-
Creation of dynamic line style
Hi all
In MapBuilder, the line style have an option to set the CAP and seal. We can define nozzle like end to END, SQUARE or ROUND and attached miter, BEVEL, and ROUND.
How can I adjust these settings when creating dynamic style using mapviewer api addLineStyle (.)? For example the following will create line style with the default value settings cap (ROUND) mixed (ROUND) and at the end.
mapViewer.addLineStyle("highwayline","#33a9ff","4",false,null,null,null,true,"red","1.0",false,null,null);
I need to create the style of line with tip BUTT and as a miter Joint.
Thank you
Sujnan
Published by: sujnan on May 22, 2009 11:03Assuming that your qs is on the java lib (mapclient), use addStyle with a LineStyleModel and
setCap and setJoinaddStyle (java.lang.String name, StyleModel tempStyle)
Adds a temporary style to the current demand for the card.public class LineStyleModel
extends from AbstractStyleModelRepresents the data model for a style of LINE MapViewer.
setCap
public void setCap (int CAP)
Sets the decoration to apply at the end of the path of the line. BASICSTROKE. CAP_BUTT, BASICSTROKE. CAP_ROUND, BASICSTROKE. CAP_SQUARE
setJoin
public void setJoin (int join)
Sets the decoration applied to the intersection of two roads. BASICSTROKE. JOIN_BEVEL, BASICSTROKE. JOIN_MITTER, BASICSTROKE. JOIN_ROUND
(The MITTER may be a typo. Will check)
Maybe you are looking for
-
How to re-download the messages from the server
On my first PC with Windows 7-64 bit, I have my server settings to leave messages on the server for 55 days. I need to re-download the old messages in Thunderbird probably because of some problems with Time Warner Road Runner sometimes a blacklist em
-
Updates to configuration - step 3 of 3 (over and over again)
After windows vista update I get this message that I reboot: "updates of configuration - step 3 of 3-0%" (translated from Danish: o). After awhile, it restarts and I get the same message again. " Can someone help me, please?
-
Whenever I try to print I get a window 'Print to file' and cannot print the label.
I print labels on the site of the courier to the United States. Now whenever I try to print one I get a window 'Print to file' and cannot print the label. So, how can I undo this command?
-
Z3C camera question "current in another app record cannot be saved"
Hello! I got my Z3C and it is a great device but also got a little problem with the camera app whenever I start the original camera application, I also get the following message: "current record in another app could not be saved.After confirming the
-
I am able to access the web pages, but other programs cannot access the internet.
This problem started a few days ago. It is not my router. If I try to go in the network and sharing Center it just freezes. I have absolutely no idea how to fix this.