Updates to configuration - step 3 of 3 (over and over again)

Similar Questions

• Updates not configured correctly restore changes (stays on and will not shut down)

  When I turn on my computer laptop windows vista, the screen «updates not configured...» "stays on and won't. Seriously, I was sitting there for five hours, trying to make it disappear. I tried to reboot in safe mode, last known good configuration etc. I don't have a Windows Vista disc, but I really need all the files on the computer for school work. I'm sure you'll enjoy it, it's almost time review and I would be devastated to lose all my tickets!

  Any help would be great!

  Hey Joe Smith,

  What happened when you try to start in safe mode?

  Method 1
  I suggest to disconnect all external devices except the mouse and keyboard and check if you are able to boot to the desktop.

  Method 2
  You need Windows vista disk inorder to continue further troubleshooting. If you use a computer Original equipment manufacturer (OEM), I suggest you to contact the manufacturer of your computer for Windows Vista disc. Once you get the Windows Vista installation disc, you can try the steps from the following link.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

• I went to update and it won't let me update. It just says: to please quit and try again later and I continue fact that and still, it won't let me. My photoshop has not been updated in forever and my current photoshop lacks some fonts that I need fi

  I went to update and it won't let me update. It just says: to please quit and try again later and I continue fact that and still, it won't let me. My photoshop has not been updated in forever and my current photoshop doesn't have some fonts that I need to fix my Web site

  Hi jennah68228106,

  Please refer to the below given links:

  Troubleshoot Adobe Creative cloud download, install and update questions

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Do not install updates | Failure to update or U44M errors

  The activation and deactivation of Adobe problems

  Let us know if that helps.

• Error Windows Update 80071AA7 - implemented to date has failed time and time again

  Hello

  I get the error code when you try to upgrade Windows Vista Home Edition through the ease of windows update.

  The update is Cumalative security for Internet Explorer 8 for Windows Vista (KB2530548)

  I tried to uninstall Internet Explorer 8 via the uninstall command, also using an article written by microsoft for developers - all fail when the system tries to restart and the system "reverts changes."

  I tried to install Internet Explorer 9 through windows and via a download direct but same process!

  This affects the new updates that are not as well, when they are applied individually they work and install without problem.

  Its a wholemeal bread - of ideas?

  Hello

  ·         Since when are you facing this problem?

  ·         Which antivirus program is installed on the computer?

  Step 1: Temporarily disable the antivirus on the computer program.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Step 2: You can reset Windows Update components, and then install the update.

  How to reset the Windows Update components?

  See also:

  Problems with installing updates

• GC installation fails on the WHO with NodeManager Configuration step

  I try to install OEM Grid Control and I'm having some trouble to make it past step in the installation of the Configuration of the WHO. I'm not very familiar with Oracle products. I finished all the configuration steps listed in the documentation, and in order to solve a problem earlier, I deleted the Keynectis and Telesec certificates since the cacerts file java keystore. NodeManager is run as a service, even if I think that the Setup process starts a new instance because it cannot connect to the service. I was also unable to connect to the service through the nmConnect WLST function, if it is possible my settings are incorrect. If the only problem is that GCDomain is not saved in the file nodemanager.domains, I'm not sure what I'm doing wrong, because I put it in the nodemanager.domains file located at C:\Oracle\Middleware\wlserver_10.3\common\nodemanager:
  
  ---
  #Domains and directories created by the Configuration Wizard
  #Fri 22 April 15:23:16 EDT 2011
  wl_server=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\wl_server
  MEDREC-Spring=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\medrec-Spring
  GCDomain = C\:\\Oracle\\gc_inst\\user_projects\\domains\\GCDomain
  MEDREC=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\medrec
  ---
  Note: the file paths are correct and using escaped slashes, as appropriate, but this message board system turns the last double backslash in a line break. I can't find any html solution that works, so just take my word for it
  
  I restarted NodeManager after making the change as well. Any help would be appreciated. Thank you.
  
  Details:
  Machine - Windows Server 2008 x 64
  DB - 11 GR 2
  WLS - 10.3.2
  GC - 11.1.0.1
  
  Install the Log:
  ...
  FINE: Connection to the node Manager... April 22, 2011 15:23:19 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: April 22, 2011 21:23:19 CEST > < opinion > < security > < BEA-090898 > < without taking account of the approved CA 'CN = AC KEYNECTIS ROOT, OU = ROOT, O is KEYNECTIS, C = EN ". Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. > April 22, 2011 15:23:19 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: April 22, 2011 21:23:19 CEST > < opinion > < security > < BEA-090898 > < without taking account of the approved CA ' CN = T-TeleSec GlobalRoot class 3, OU = T - Systems Trust Center, O = T - Systems Enterprise Services GmbH, C = OF. Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. > April 22, 2011 15:23:19 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: April 22, 2011 21:23:19 CEST > < opinion > < security > < BEA-090898 > < without taking account of the approved CA ' CN = T-TeleSec GlobalRoot class 2, OR = T - Systems Trust Center, O = T - Systems Enterprise Services GmbH, C = OF. Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. > April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: This Exception occurred at Fri Apr 22 15:23:20 EDT 2011. April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: weblogic.nodemanager.NMConnectException: Connection refused: connect. Cannot connect to NodeManager. Check that they are running to win2008x64-2:7, 401. April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: java.net.PlainSocketImpl.socketConnect(Native Method) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: java.net.Socket.connect(Socket.java:525) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.nodemanager.client.SSLClient.createSocket(SSLClient.java:38) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:227) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:199) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:205) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:52) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:175) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:168) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: java.lang.reflect.Method.invoke(Method.java:597) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyReflectedFunction.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyMethod.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyObject.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyObject.invoke(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: to $3 org.python.pycode._pyx2.nmConnect (< iostream >: 118) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: to org.python.pycode._pyx2.call_function (< iostream >) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyFunction.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyObject.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: to org.python.pycode._pyx41.startNM$1(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\start_server.py:20) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: to org.python.pycode._pyx41.call_function(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\start_server.py) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyFunction.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: to org.python.pycode._pyx39.f$0(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\create_em_infra.py:74) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: to org.python.pycode._pyx39.call_function(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\create_em_infra.py) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.PyCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.core.Py.runCode(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: org.python.util.PythonInterpreter.execfile(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: weblogic.management.scripting.WLST.main(WLST.java:131) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: java.lang.reflect.Method.invoke(Method.java:597) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
  FINE: in weblogic. Run WLST.main(WLST.java:29) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader
  FINE: Wed Apr 22 15:23:20 EDT 2011 Apr 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Node Manager down from this April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader works
  FINE: Not connected to the Node Manager Apr 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Launch NodeManager...
  April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Properties: {ListenAddress=win2008x64-2,ListenPort=7401,NodeManagerHome=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239,StartScriptEnabled=true,StartScriptName=startEMServer.cmd}.
  April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Command: C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\bin\javaw.exe - classpath "C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\lib\rt.jar; C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\lib\i18n.jar; C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\patch_oepe1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\JROCKI~1.5-3\lib\tools.jar; C:\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar; C:\Oracle\MIDDLE~1\modules\features\weblogic. Server.modules_10.3.2.0.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\lib\ant-all.jar; C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1\lib\ant-contrib.jar; C:\Oracle\Middleware\oms11g\sysman\jlib\emConfig.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf-API.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\jrf-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.odl_11.1.1\ojdl.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.odl_11.1.1\ojdl2.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.dms_11.1.1\dms.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.dConfig-infra_11.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.fabriccommon_11.1.1\fabric-common.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.xdk_11.1.0\xmlparserv2.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.xdk_11.1.0\xml.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-pmlib.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-policy-core.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-secpol.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-dependencies.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. WSM.policies_11.1.1\wsm-Seed-Policies.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\orawsdl.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\mdds.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\ws_confmbeans.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\org.Apache.Commons.digester_1.7.jar; C:\Oracle\MIDDLE~1\ORACLE~1\... \modules\javax. XML.bind_2.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\... \modules\javax.activation_1.1.jar. C:\Oracle\MIDDLE~1\ORACLE~1\... \modules\javax. XML.stream_1.1.1.0.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.http_client_11.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jmx_11.1.1\jmxframework.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jmx_11.1.1\jmxspi.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.dconfigbeans_11.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share.CA_11.1.1\adf-share-base.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share.CA_11.1.1\adf-share-ca.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\adflogginghandler.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\adfsharembean.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\commons-El.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\jsp-El-API.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\oracle-El.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\auditwlst.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\sslconfigwlst.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\oamap_help.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\ossoiap_help.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\jps-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.auditprovider_11.1.1\jps-WLS-auditprovider.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-manifest.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-MBeans.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-upgrade.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-patching.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-sh~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-WLST.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar"weblogic. NodeManager '-v '.
  April 22, 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:21 > < INFO > < domains file: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains > 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:21 weblogic.nodemanager.server.NMServerConfig initDomainsMap 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: INFO: loading areas file: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains April 22, 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:21 > < WARNING > < domains file not found: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains > 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:21 weblogic.nodemanager.server.NMServerConfig initDomainsMap 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: WARNING: areas file not found: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains April 22, 2011 15:23:22 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:22 > < INFO > < store loading identity keys: FileName=C:/Oracle/MIDDLE~1/WLSERV~1.3/server\lib\DemoIdentity.jks, Type = jks, PassPhraseUsed = true > 22 April 2011 15:23:22 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:22 weblogic.nodemanager.server.SSLConfig loadKeyStoreConfig April 22, 2011 15:23:22 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: INFO: loading storage identity key: FileName=C:/Oracle/MIDDLE~1/WLSERV~1.3/server\lib\DemoIdentity.jks, Type = jks, PassPhraseUsed = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 > < WARNING > < folder properties for configuration manager node 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' not found. Using the default settings. > April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 weblogic.nodemanager.server.NMServer < init > 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: WARNING: configuration properties manager node of the file 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' not found. Using the default settings. April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 > < INFO > < Saving configuration properties node manager 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' > 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 weblogic.nodemanager.server.NMServer < init > 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: INFO: save the configuration properties node manager 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: node Manager v10.3 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: Configuration settings: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: NodeManagerHome=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: ListenAddress = win2008x64-2, April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: ListenPort = 7401 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: ListenBacklog = 50 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: SecureListener = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: AuthenticationEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: NativeVersionEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: CrashRecoveryEnabled = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: JavaHome=C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: StartScriptEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: StopScriptEnabled = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: StartScriptName = startEMServer.cmd April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: StopScriptName = April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogFile=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.log April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogLevel = INFO April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogLimit = 0, April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogCount = 1 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogAppend = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogToStderr = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: LogFormatter = weblogic.nodemanager.server.LogFormatter April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: DomainsFile=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: DomainsFileEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: StateCheckInterval = 500 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: QuitEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: Interface = April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: NetMask = April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: UseMACBroadcast = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: DomainRegistrationEnabled = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: mappings of domain names: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 > < INFO > < Secure socket listener started on 7 401, host WIN2008x64-2/192.168.182.135 port > April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:23 weblogic.nodemanager.server.SSLListener run April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: INFO: Secure socket listener started on port 7 401, host WIN2008x64-2/192.168.182.135 April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Successfully launched the Node Manager. April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: The Node Manager process runs independent of the WLST process. April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Exit WLST won't stop the Node Manager process. Please see April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: to the Node Manager records for more information. April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Node Manager logs will be under C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239 April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: Connection to the node Manager... April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: April 22, 2011 15:23:41 > < WARNING > < directory domain read when Configuration Error > April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: weblogic.nodemanager.common.ConfigException: the field 'GCDomain' to 'C:\Oracle\gc_inst\user_projects\domains\GCDomain' was not saved in the file nodemanager.domains and dynamic domain registration is not supported. Please register the domain in the file nodemanager.domains. April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: to weblogic.nodemanager.server.NMServer.getDomainManager(NMServer.java:257) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: to weblogic.nodemanager.server.Handler.handleDomain(Handler.java:224) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: to weblogic.nodemanager.server.Handler.handleCommand(Handler.java:108) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: to weblogic.nodemanager.server.Handler.run(Handler.java:70) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  FINE: NMProcess: at java.lang.Thread.run(Thread.java:619) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
  ...

  Vijay,

  Your correct. Even with regard to the OEMGC 10 g Oracle still doesn't have a Windows 64 bit for OEMGC 11 g version.
  It sometimes means that are all companies except 1, the GC server 64-bit Windows servers.

  Eric

• My computer is stuck in "configuration updates: stage 3 of 3 0% complete.". Do not turn off your computer. It restarts just over and over again with the same message.

  I have a Dell Inspiron 1525 with Windows Vista, and I have tried the following to fix my endless reboot with the "Configuring updates: stage 3 of 3 0% complete.".  Do not turn off your computer. »

  • I inserted the cd 'Réinstallation DVD Windows Vista', but it won't pop up any kind of prompt for me to do something with it.  I tried putting the cd in what was on the computer and tried leaving him in and restart it - but the cd has no EFFECT.
  • I used the F8 key and I tried the following with no luck: safe mode, safe mode with network, safe mode w / command prompt, enable logging, last known good configuration (Advanced) boot and debug mode.  Most of these options make the monitor off (to make you think he will do something), then it just restarts and did the thing reboot loop again and again.
  • I also tried the repair your computer option to the F8 key.  He asks me to log in as an administrator (but my password does not work).  So, I use the menu drop down and choose the name of my computer and then use my password, and I can connect to "restoration of access options '.  Once I'm in the "System Recovery Options".  I tried the following with no luck: Startup Repair tool, restore the system, Windows complete PC Restore, Windows Memory Diagnostic tool and command prompt.  THE only ONE that I HAVE NOT YET TRIED it IS THE "DELL FACTORY IMAGE RESTORE", it's because I want to try to fix it without losing everything on my hard drive.  Here are the details of the I've tried in the "System Recovery Options".
  • The command prompt says: 32 X:\Windows\system > (I have no idea how to use it, but it's what he says)
  • The memory diagnostic tool reboots the computer, but nothing new happening (just reboot over and over again)
  • In the PC restore full Windows: I tried to put the Windows Vista CD in, but it can not find a valid backup location
  • When I click on the system restore: it is said: "no restore points were created on your computer's system disk.  To create a restore open system protection point.  When I click on the system protection, it is said: "your computer is running in a limited diagnostic State.  If you use the system restore in this limited State, you can't undo the restore operation.  Help topics are not available in this State. "  So I press OK, and I'm back to square one.
  • When I click on startup repair: it says "Startup Repair could not detect a problem.
  • I know there are many many posts on this problem, and I think I've tried all the suggestions on how to solve the problem, but they do not work for me.
  • PLEASE HELP ME!  I need my computer for my college work.  I can't borrow laptop my friend forever!

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Cannot install windows update, error: configuration of updates. Step 3 of 3. 0% complete. Do not turn off your computer

  Original title: My laptop has frozen all by installing a Windows Vista Automatic Update

  My Samsung R70 was installing an update when it stuck on a screen saying, "Configuring Updates. Step 3 of 3. 0% complete. Do not turn off your computer. "After several hours, I turn off my laptop and since then I tried to open safe mode. I removed the battery and let the power drain before restarting and I also tried to startup, Samsung II of the recovery and restoration of the system repair. Nothing works! When I start I get the same "Configuring Updates" screen and I can't get in front of her.

  Someone at - it ideas? Thanks a lot in anticipation!

  Hello

  I suggest you try the steps from the link below and check if it helps.

  Default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates: http://support.microsoft.com/kb/949358

  Hope this information is useful.

• Update Apple Configurator 2 App

  Hi all

  I have a few questions related to Apple Configurator 2 which I hope you can answer.

  In the first Apple Configurator, you can update apps in iTunes, and then add them in the Configurator of Apple, replacing the older version of the app. In Apple Configurator 2, this is not the case. Even if I downloaded the latest version of the app in iTunes (for example iMovie for example), Apple Configurator 2 redownloads always applications that need to be updated on a device. For example, I have 23 iPads all need 7 app updates. When I select all and press update, it recognizes 7 applications that need to put up-to-date and going to download the updates. Why Apple Configurator 2 does not recognize that there are already some updated versions of the applications on the computer, or allow me to 'say' Apple Configurator 2 updated applications exist?

  Moreover, I met an error during the "transfer area" some applications so I decided to update a single iPad as a test. It worked. But when I'll update another iPad, you must re-download the updates again, even if she JUST downloaded the exact same app for the iPad last update. Then why Apple Configurator is a temporary storage for applications previously updated? If I update iMovie on iPad #1 and then update iMovie on iPad #2, please redownload the update for each iPad. If, for any reason, you need to update the iPads, one at a time, it will really really take a lot of time to download the same updates over and over again. Does not appear very effective.

  Any ideas?

  All iPads have the latest version of iOS 9, and the computer uses El Capitan 10.11.2

  (Like a slight upgrade, I think it may be faster to simply add the applications again, replacing older versions.) However, this will give you a prompt to replace the existing application. "She will do it for each application being replaced in this way.)

  Post edited by: Pmintz25

  See:

  https://www.Apple.com/support/osxserver/cachingservice/

  I think you can buy OS X server for about $20.

  R

• Error: The Windows Update components must be repaired. One or more components of Windows Update are configured incorrectly

  Original title: Windows Ypdate default data locations have changed. By MS Fix - it = need to change the locations of update of widows to the default settings of Windows. How do I do that?

  All the Windows security updates fail since late May. Used MS Fix Center, issued found = "components Windows Update must be repaired. One or more components of Windows Update are configured incorrectly. "Need to"places of Windows Update change to the default settings of Windows. How can I do?

  1 McAfee Total Protection, 27/02/2013 expiration date. No other anti-spyware or firewall, only MS Windows firewall.

  2. any other Norton or McAfee has never been installed.

  3 McAfee is installed in the PC.

  4. no
  4B. no
  4 c. [all except KB2718704]
  4 d all found.
  4th. KB2393802 12/02/12 and Ko 971029 3/17 / 12.

  5. ask to Google Chrome

  6 Java is U.5 V.7.

  7. do not use Registry cleaners.

  8. never install repair or cleaning set

  Fact: McAfee (and Norton) applications are notorious for not not upgrade (or uninstalling) itself. Evidence for many years of McAfee "leftovers" is the troublemaker more likely here.

  Roll up your sleeves & cross your fingers...

  ACTIONS

  [You will see that there is quite a bit to do this, you may want to print these instructions for reference offline. Perform ALL steps below in a 1 meeting - allow a minimum of 1 hour.  Don't skip the steps!  [Note: If a step said to restart, restart! ]

  1. click right on the following link to download the McAfee Consumer products Removal tool, select SAVE as... & download the utility on your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your key of handy product, uninstall McAfee Total Protection via Start | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online make sure that the Windows Firewall is activated immediately after the reboot!  (Should be done automatically, but I want you to check.)

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #7 below!

  5. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  (6 do a clean install of McAfee Total Protection (using your product ID, if need be) & restart). If you purchased the software directly from McAfee, go to https://home.mcafee.com/Secure/Protected/Login.aspx to connect and download your software.

  Note: McAfee Total Security includes a firewall, Windows Firewall should be disabled now (that is, you shouldn't have too much active).

  7. on several occasions the McAfee application manually update until you get a "not more than updated" or similar prompt.

  8A. Start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: select (check) the CUSTOM [<>] configuration option, and then click the arrows pointing to the far-right | Browser: select "Internet Explorer" here (to not "use my current... »).

  Illustration: http://teamtutorials.com/wp-content/uploads/2007/05/set-program-access-defaults-02.jpg

  8B. now check your settings here: IE tools | Internet Options | Programs | Default web browser: If the make default button is NOT dimmed, click/press it. [1]

  9. right click on the following link and SAVE the download to your desktop: http://www.slipstick.com/problems/reg/chromehtml.reg [2]

  9. b double-click the file that you saved in # 9 above & accept invites him to MERGE with the registry data.

  10. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  12. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  12 b. IMPORTANT!-online make disappear/close theTroubleshooting Windows Update tool ""pop up! "   " -then...

  12. ignorant of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [3]

  13 restart once more.

  [Take a break! Go outside & run your yard to wake you up! [Take a beer, if you want - then...]

  14. assuming that everything is fine, open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you manage to install all security updates (for example, KB2698365;) KB2699988) available now; Follow all the instructions.

  -Online if an update of root certificates is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8.

  -Online Tip: do NOT install any other updates software optional or any updated material in option .

  15 Reply to this post with a status report and (hopefully) confirm that KB2698365, KB2718523, KB2691442, KB2655992, KB2719985, KB2699988, KB2685939, KB2707511 & KB2718704 are all listed in Add/Remove Programs now.

  Good luck!

  ==================================================
  [1] after that we ended up this thread, do not hesitate to reaffirm Chrome as a default, if you wish.

  [2] trust Source: http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions/

  [3] full Disclosure: running the utility of automated troubleshooting will remove your history of update but not the list of installed updates.

• update of security guard loading over and over again KB2707511

  My computer Guard Security Date KB2707511 of loading over and over again what can do.

  Hello

  I suggest you try the steps from the following link:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update http://support.microsoft.com/kb/910339

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://support.microsoft.com/kb/322756

• Installation says 'successful', however, same updates needs to install over and over again. (KB2518864, KB2633880 & KB2572073)

  Hi all

  original title: install said 'successful', however, same updates needs to install over and over again.
   
  Hope everyone is doing well.  This just happened this morning and try to find solutions but seems I can't find the right one.
  So I got the "shield of Microsoft", letting me know that I have some new updates available.
  1. Update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  2. Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)
  3 security update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  I installed the following updates and he "succeeded".  A few minutes later, the shield pops up again asking me to install the SAME updates.  I did it again and once more "managed".  A few minutes later, the shield popped up again (same updates).  This time, I installed it, my computer re-setting, however, the same updates need to be installed again.  I'm ignoring the shield right now.
  Thoughts on that?  This means - it is NOT installed correctly?  How can I fix it?
  I have a netbook, Windows XP laptop.
  Thank you.

  Hello

  It seems to be a mess of some sort on the server. Until that which is high to the square correctly, follow these steps.

  We will empty the download folder.

  Start > typeRegeditdans cmd & press enter

  type in
  net stop wuauserv

  OUTPUT

  NB. which temporarily stops the automatic windows update service. Your next restart of Windows, it will be again.

  Go to Windows Explorer.
  Look on your system (usually C) drive and see the name of the Windows folder. Like Windows or WINNT.
  Edit following as appropriate.
  If your Windows folder is C:\Windows. Look at this file
  C:\Windows\SoftwareDistribution\download

  If you find files in there, remove them. This file is where the Windows Update files are stored downloads.

• updated Windows SP1 downloaded fine, but I still get notified to install the same thing over and over again... What's new.

  updated Windows SP1 downloaded fine, but I still get notified to install the same thing over and over again... What's new.

  Hello

  I understand that you are warned to install the update even repeatedly. I'll be happy to help you with this problem.

  (1) did you do changes on the computer before this problem?

  (2) you have Service Pack 1 installed on your computer successfully?

  (3) are you advised to re - install the Service Pack 1 update again?

  (4) you receive an error message when you try to install Service Pack 1?

  Method 1: I suggest you run Microsoft FIXIT from the link and if the problem persists.

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 2: I also suggest you to follow the steps from the link and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  For reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• updated configuration failure Vista - updates not configured correctly. returning from the changes - code Error 80070020

  Updates installation but to the message indicating a configuration step 2 bed 'updates not configured correctly. reverting changes"error code is 80070020.

  http://support.Microsoft.com/kb/883825>

  08/10 / 1106:12:26

• I follow from the same date over and over again. And it updates successfully whenever I sign in my computer.

  I follow from the same date over and over again.  And it updates successfully whenever I sign in my computer.   Or I can click on windows update and update the same thing again.  Some miuutes or a fews seconds it will say I need to update my computer again.  I updated the same 25 times.  How can I stop this.

  Hello

  I suggest you follow the steps in the link below and check if it helps:

  http://support.Microsoft.com/kb/910339

  It will be useful.

• HP Pavilion dv6 B8N04PA #ACJ: update the configuration of failure. Restoration of the changes

  Whenever the laptop to install the update. Then when you restart it will read the updates of configuration failure. Restoration of the changes.

  This continues until 30 minutes before it finally restarts

  Hi @mayurz91 ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your problems of HP Pavilion dv6-7040tx laptop and with updates.

  Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system.

  If you run an antivirus protection, this could be a problem. Disable temporarily to perform the required updates.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Plug the power supply directly to a wall outlet works. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

  I hope this helps.

  Thank you.