Example of VideoPhoneLabs does not

Similar Questions

• Examples of messages does not appear BBM messages

  Question:

  What is expected.  The API does not capture (any other API for this to be) BBM messages.

• Example SynchAI-AO does not work

  Hello!

  I use a USB 6621 and I tried to run the code example, ANSIC C SynchAI-AO delivered with the equipment.

  First of all, I got the following error message:

  DAQmx error: terminal Source routing is not found on the device

  Make sure that the name of the terminal is valid for the specified device. Refer to

  Measurement & Automation Explorer of valid names of terminals.

  Property: DAQmx_DigEdge_StartTrig_Src

  Property: DAQmx_DigEdge_StartTrig_Edge

  Source device: Dev1

  Terminal: AI/aiStartTrigger

  Task name: _unnamedTask<1>

  Status code :-89120

  Then I changed the following line (the rest of the code remains unmodified):

  DAQmxErrChk (GetTerminalNameWithDevPrefix(AItaskHandle,"ai/aiStartTrigger",trigName));

  TO:

  DAQmxErrChk (GetTerminalNameWithDevPrefix(AItaskHandle,"ai/StartTrigger",trigName));

  Now I get a different error message:

  DAQmx error: measurements: unbuffered clocked by the hardware operations don't are not supported for this device, a Type of channel.

  Set the buffer size that is greater than 0, do not the sample clock synchronization, configure or

  set timing sample on request.

  Task name: _unnamedTask<1>

  State code:-201025

  I'm a bit confused.

  Running this example is not possible with my hardware (if so, you can get information about the example codes work with my hardware, and which are not)?

  Or is there a bug in the code for the example?

  Thanks in advance for your answers!

  Kind regards

  Christian

  Hi Christian,

  Thanks for posting about the problems you found with this example program. Change ' HERE/aiStartTrigger' to "AI/StartTrigger" is correct. The problem that causes error-201025 is a missing line of code (which goes directly below the call to GenSineWave()):

  DAQmxErrChk (DAQmxWriteAnalogF64 (AOtaskHandle, 1000, FALSE, 10.0, DAQmx_Val_GroupByChannel, AOdata, NULL, NULL));

  Once you add this line, it should work (tested with a USB-6229; I guess that you have a USB-6221?). These problems have been reported to R & D such as CAR #181942.

  Brad

• Examples of applications does not.

  Hello

  I'm launching given Simulator demo/sample applications.

  Most of them is errors.

  for example.

  For the HTTPDemo project, I get this error

  "Error at startup of HTTPDemo. class" net.rim.device.api.command.Comman "not found"

  Project SockerDemo - same error.

  For SMSDemo

  "Error at startup of SMSDemo. class" net.rim.device.api.command.CommandHandler "not found"

  I am running Simulator version 5.0.0.592 - 8900 - and using eclipse plug-ins.

  I tried to look for the cause, some say that this class 'command' is available on version 6.0 of the Simulator only, so it will not work on this one and to use 4.5 samples instead.

  But I couldn't find examples for 4.5.

  Any help would be appreciated.

  Welcome to the support forum.

  the examples in this folder from your eclipse installation (change the JRE version number):

  plugins\net.rim.ejde.componentpack5.0.0_5.0.0.25\components\samples

  as you work with 5.0 I suggest that you use 5.0 samples.

  Another option would be to change the JRE of the eclipse at 6.0, depends on the target of your project.

• HTMLLoader event with example of Adobe does not

  Hello!

  What could be the problem? I test class HTMLLoader. But it seems that Flash does nothing when I use the example of Adobes with Flash CS5 and AIR for iOS:

  package {}

  import flash.display.Sprite;

  import flash.html.HTMLLoader;

  import flash.net.URLRequest;

  SerializableAttribute public class Main extends Sprite {}

  public void Main() {}

  var html:HTMLLoader = new HTMLLoader();

  var urlReq:URLRequest = new URLRequest ("http://www.adobe.com/");

  HTML. Width = stage.stageWidth;

  HTML. Height = stage.stageHeight;

  HTML. Load (urlReq);

  addChild (html);

  }

  }

  }

  The solution is stageWebView class, it will work on iOS.

  http://help.Adobe.com/en_US/AS3/dev/WS901d38e593cd1bac3ef1d28412ac57b094b-8000.html

• Example: Flag: speaker does not

  I have hp laptop suddenly speakers are not working but headphones are working

  could help me or not

• Portege 2000 does not work with SP1 or SP2 & SD card problems

  Hello!
  I have some problems with my Portege 2000.
  1. I had to run Windows XP without Service Packs and updates, because when I install SP1 or SP2 for example, the Portege does not start after that (white screen). The laptop starts only in Mode safe so I can uninstall the Service Pack and it works again. What can I do?

  2. I also have problems with the SD card slot. Host and card drivers are installed properly. I tested it with a 128 MB and 512 MB SD card-> works very well. But readers don't read my 2 GB card. Is the controller too old to work with more than 1 GB card?

  Thanks for the help and sorry for my English :)

  Hello

  1.) Please check the document on the page of the Toshiba driver on the SP2 updates. It seems that you need to update some drivers and tools

  2.) Yes, it seems that the SD controller cannot manage a larger SD card sizes. In this case, you will need to use an external solution.
  Buy a mulitcard reader and connect it to the USB port. This player are cheap one should support several types of cards and sizes

• Correction of the Lightroom 2015.6 goal does not automatically detect lens

  Hello

  The last update seems to have removed the lens correction option activate in the lens correction Panel (there are three check boxes, now there are only two).

  Now when I check activate profile corrections, or the auto default options are able to detect the lens I used to take the picture. Lightroom has said that it is "impossible to locate a matching profile automatically.

  When I manually select the lens seems to apply appropriate adjustments. But I really don't want to have to select the brand and model whenever I want to apply the correction manually, especially considering I shoot with different objectives.

  Is there a setting I need to change so that Lightroom automatically detects the lens used, or is this a bug?

  I shoot with a Canon 6 d. When I check the EXIF data in the module library all the relevant information is still there, lens of the camera body used etc.

  Thank you

  
  Matt

  LR CC 2015.6 using, I can import a 6 d test image I downloaded from the internet, enable Auto or defect in the purpose of plant and it detects the lens this particular test image was taken with:

  

  If you want to download an example image that does not work for you to www.dropbox.com then others can take a look to check if there is a problem with the LR or something that happens on your computer.

• Nesting templates: child-model Pages does not fully to the Editable vs a-Editable regions

  Me kay, so first of all, it's all done within Dreamweaver CS5. How can I explain this, is that I have a series of Master-models for my site, then accompanied by child-models related to offshore of / nested my master-models. So far it's going wonderfully, until what I'm trying to make a page of one of my children-models.

  The page of my child-model accurately comment on an non editable (region in which is editable in the master model, but left as ONLY editable within the child-model) as long as I add an EDITABLE area it contains. In the circumstances I have DO NOT add an editable region in the editable area of the master model, the area within the Page is appearing always editable.

  For example:

  __________________

  Model Master:

  <!-TemplateBeginEditable name = "ChildTemplateCSSLinks"->

  Model child CSS links here.

  <! - TemplateEndEditable - >

  _____

  Child model:

  <!-InstanceBeginEditable name = "ChildTemplateCSSLinks"->

  Model child CSS links here.

  <!-TemplateBeginEditable name = "ChildPageCSSLinks"->

  Child CSS PAGE links here.

  <! - TemplateEndEditable - >

  <! - InstanceEndEditable - >

  _____

  The child page:

  Model child CSS links here. (Precisely appearing not editable - {editable area of the master model tags appearing exactly invisible})

  <!-InstanceBeginEditable name = "ChildPageCSSLinks"->

  Child CSS PAGE links here. (Accurately appearing editable)

  <! - InstanceEndEditable - >

  __________________

  It is a WORKING example of editable regions. In the child Page "Template CSS child links here." Appearing in comment and therefore not editable in the child Page, as if it was supposed to be. This time allows the 'child PAGE CSS links here' to be editable with PRECISION within the child-Page.

  Now for an example of what does not work:

  __________________

  Model Master:

  <!-TemplateBeginEditable name = "ChildTemplateCSSLinks"->

  Model child CSS links here.

  <! - TemplateEndEditable - >

  _____

  Child model:

  <!-InstanceBeginEditable name = "ChildTemplateCSSLinks"->

  Model child CSS links here.

  (As you can see, I've added an extra editable within the editable area of the master model. This is an area which is supposed not to be editable within the child-model and NOT the child-Page, which seems to be up to NOW accurate.)

  <! - InstanceEndEditable - >

  _____

  The child page:

  <!-InstanceBeginEditable name = "ChildTemplateCSSLinks"->

  Model child CSS links here.

  (For a reason, THAT as long as I DO NOT add an additional child-model - edit box in the editable area of the master model, this area is appearing ALWAYS visible but also editable in the child Page.)

  <! - InstanceEndEditable - >

  __________________

  So, in this circumstance, it seems that the only way I can leave ALONE the editable region of the master model can be changed within the child-model and NOT editable in the child Page is leaving an ADDITIONAL editable produced through the child-model somewhere within the editable region EVERY SINGLE, produced by the master model. Unless I do something bad, it seems this until a potential defect/bug in Dreamweaver CS5. I can't imagine how this would be correct, otherwise child/Nested-Templates would be not possible to do. What could I do it wrong? Is it possible that I can specify in the master model is an editable editable ONLY within the child-model and NOT yet child-Pages (A Page based on the template of the child)? Or maybe is it possible that I can specify the child-model that an area can be changed WILL NOT be editable in the child Page? Furthermore, no, I DON'T want to make "Optional Regions", so please do not suggest that.

  I know it's all probably a little confusing, but I hope the examples above more than descriptions aside. As you can probably assume, it is definitely a HUGE complication in my site if it does not end up being a solution, especially with all the time I put into making the child models, which I hope to rely on. It would be really silly if I had to script - in an editable region extra in each master-model-editable-region unique available within my child-model just so that I can update my child-model, in addition to my changes to my child-Pages, to fall as much as it would maintain the content that I never wanted to be editable in the child Page in the FIRST place.

  Some help would be appreciated sincerely, as soon as possible, if I could ask politely.

  Thank you. Sincerely,

  ~ Miss Cat

  = _ = I can't believe that I say this, after having written ALL that a period, but thanks to 'Dreamweaver CS5 for Dummies,' I just found out that if you place: @@("") @ in the editable area of the desired child/Nested model DO NOT passed down for your child-Pages, it won't appear not editable. God knows why such a discrete formula was the answer, but I guess that everything works. ... WHY WAS IT SO DIFFICULT TO FIND INFORMATION? @_ @ Information about nested templates in general seems quite hard to find, however, so I'm glad that I thought that this output /not/ never a full hour / after writing all this upward and detachment. #__#  ... At least my child models can work perfectly now, though. Then... FIXED scenario. ^^

  I hope that now this information will appear useful to someone else hunting for that information via Google or other search engine in the future. And if there is nothing at all that I'm still officially missing, then do feel free to add to food and let me know, because the last thing I need now of law are more surprising difficulties also slow down the productivity of this vast project I worked on... @_ @... But so far things seem to be going well. ^^ So I can just incredibly grateful that he will eventually be a solution to this ridiculous after all.

  Sincerely,

  Miss Cat

  [info promo signature removed by Moderator]

• Checkpoint does not work

  Hello
  
  I create a menu type MI_DEBUG Check item in a submenu named EXTRAS_MENU.
  In the menu item code, I want to activate the debug logging of the actions of the current user.
  
  In the Startup Code of the Menu, I put the State OFF.
  When the user clicks the menu item, I want the State to modify checked and back on a second click
  
  Startup code of the menu

  DECLARE
      mi_id   MENUITEM;
  BEGIN
      mi_id   := find_menu_item('EXTRAS_MENU.MI_DEBUG');
  
      IF id_null(mi_id) THEN
          my_debug.pl('EXTRAS_MENU.MI_DEBUG not found','zvc_menu.mmb Menu Startup Code');
      ELSE
          set_menu_item_property(mi_id,CHECKED,PROPERTY_FALSE);
      END IF;
  END;

  Menu item code

  DECLARE
      mi_id   MENUITEM;
  BEGIN
      mi_id   := find_menu_item('EXTRAS_MENU.MI_DEBUG');
  
      IF id_null(mi_id) THEN
          my_debug.pl('EXTRAS_MENU.MI_DEBUG not found','zvc_menu.mmb mi_debug');
      ELSE
          my_debug.pl('EXTRAS_MENU.MI_DEBUG found','zvc_menu.mmb mi_debug');
          my_debug.pl('Status '||get_menu_item_property(mi_id,CHECKED),'zvc_menu.mmb mi_debug');
          
          IF get_menu_item_property(mi_id,CHECKED) = 'TRUE' THEN
              my_debug.pl('property(CHECKED) = TRUE','zvc_menu.mmb mi_debug');
              set_menu_item_property(mi_id,CHECKED,PROPERTY_FALSE);
          ELSE
              my_debug.pl('property(CHECKED) = FALSE','zvc_menu.mmb mi_debug');
              set_menu_item_property(mi_id,CHECKED,PROPERTY_TRUE);
          END IF;
      END IF;
  END;

  But I never checked sign on the menu, and each time my debug messages to say, that the CHECKED property = 'TRUE '.
  I even tried it with PROPERTY_ON/OFF as indicated by examples, but it does not work.
  
  Any ideas what's wrong with my code?
  
  Forms [32 bit] Version 11.1.1.4.0 (Production)
  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
  
  Concerning
  Marcus

  A coleague of my friends discovered once that a synchronization is not always a synchronization in rare cases to a particular shape. Create a dummy not repetitive with 1ms timer instead the sync however solved the problem. As the property itself seems to reflect the actual value, more in some cases, a synchronization between the time of execution on the server and the applet on the client comes, it must be a timing problem. Maybe the timer could help ;)

  see you soon

• gotoSlide() does not (at all)?

  I looked everywhere, but the only thing I found was other questions people on the issues of gotoSlide() and almost never an answer! Are there so many people using Flash-based slide presentations?
  
  I have a slide like this Setup:
  
  presentation
  -title
  -mediacontrols
  -slide1
  -slide2
  -cliche3
  
  'mediacontrols' I have a mc with a cb. I have an event listener for the cb who fires on events (audited) changing. It reads event_obj.target.selectedItem.data, which contains the name of the slide to move to.
  
  Everything I try, I can't do this simple jump! According to aid, I should be able to do something as simple as _root.presentation.mediacontrols.gotoSlide (slide2) (I also tried the variant hardcoded instead of the event object, not even this works). Adobe help has only examples of what does not work (none of these things is a problem here), perhaps IT would be better... in any case, what seems like a very simple command does not work regardless of what I'm trying (since yesterday, for hours, many variations).
  
  Does anyone have an idea, or maybe an example that works (has yet to see a)?
  
  ----------------
  UPDATE:
  ----------------
  I can get this kind of navigation to work using "behaviors", I found. However, a) I can only navigate based on the change in general event but does not rely on this point the user actually selected in the OC, it is more useless... and b) I do not mix in the behavior, I have all my code AS in an external file loaded at the beginning (frame 'format' dia 1).
  
  But another question: is it possible to DISPLAY AS code created by the additional behavior? For who could show me how do!
  
  UPDATE 2: last question on display AS code for a fixed behavior, I found that simply 'real' AS adds behavior code for the component, 'real', which means that I can see in the code window.

  Solved by looking at the code generated by the addition of a behavior. See attached reference code, I just changed "this" to "e.target" because I have use an external event listener IN the file and uses of behavior "to (change)" directly attached to the component. Also, I added call to 'eval' to allow using a variable with gotoSlide().

  I should add that, in my project, the data of the cb component column contains the names of the slides (screens).

• SelectBooleanCheckBox - ValuechangeEvent does not

  Hello
  
  ValueChange Listener is not working if the default value is set
  
  That is to say
  
  I have a SelectBoolean Checkbox, I linked the value attribute to support bean variable
  
  If the variable with a value by default for example, the valuchengelistener does not work when the checkbox is unchecked
  
  join the code below
  
  * < af:selectBooleanCheckbox text = ' selectBooleanCheckbox 1. "
  Label = "Label 1".
  * binding = "#{backing_index10.sbc1}" id = "sbc1" * "
  * value = "#{backing_index10.checkBox1}" *.
  * valueChangeListener = "#{backing_index10.checkBoxValueChange}" *.
  * autoSubmit = "true."
  * / > *
  
  * Boolean checkBox1 = Boolean.FALSE; *
  
  * setCheckBox1(Boolean checkBox1) public Sub *.
  *{*
  * System.out.println("===checkBox1===>"+checkBox1); *
  * this.checkBox1 = checkBox1; *
  *}*
  
  * getCheckBox1() public Boolean *.
  *{*
  * return checkBox1; *
  *}*
  
  
  pls advice

  Hi Jeethi,

  ValueChangeListener fires when there is a change between the current value and the old value, if your scope is either worn backingbean or application, the bean will be initialized for each request, so there is a difference between the default value and off value because of which valueChangeListener will not be raised.
  There was an interesting discussion on the same issue in [one of the forum messages | http://forums.oracle.com/forums/thread.jspa?messageID=3341569] by Chris Muir, you can go through it.

  Jean Lou

• not all of the graphics appear on the screen. For example, on Google chip computer of today does not appear.

  Not all of the graphics appear on the screen. For example, on the homepage Google of today, the graphics chip does not appear. This site, http://www.conifer.jeffco.k12.co.us/conifer/html/index.html - current weather conditions should appear, but they don't.

  This problem was solved when I uninstalled and then installed the new version of JAVA. Thank you for the help you offered.

  WOW great work, I certainly would not have thought of JAVA animations used it but then I don't use "WeatherBug".

• Firefox does not display some things, for example the box for this text, but only on a logon - how to fix?

  Firefox does not appear certain things. For example, the area around the text, the above options (bold, italic, type inserting a link - I can see what they are just by moving the mouse pointer in the approximate area and reading the small text that appears). Other things, that it does not appear - the word 'Google' when I opened the page of search engine, icons in eBay. On eBay, when I log in, the words "sign in" appear as 2 different fonts superimposed on one another, both in black. In Internet Explorer, it appears as white text on a blue background and is quite readable. Now that this description has reached the length where the scroll box is needed, the scroll box appeared, but there is still no box around the text. Underneath, there is a box to a drop down menu ("what happened"), but not for "began when this" or "troubleshooting information. I don't know where to put the cursor to find these areas because it turns into a bar I when I'm in the right place. The really funny thing is: only, it has that way about my logon - works of fine wife! (Work that one!) It all started when I was running version 3.8.5 (I think it was). I downloaded version 4 hoping he could solve the problem, but it didn't. I uninstalled and reinstalled, but the problem is still there. I have several months now (I think - at least 2 months) while the computer was turned off and rebooted several times, without effect.

  Looks like a broken profile. Back up your bookmarks, create a new profile , and then import your bookmarks back in. Let me know if you need additional assistance.

  Thank you!
  handsomeorlandoman

• Watch does not recognize the weight class as exercise-how can you add the duration of activity manually because none of the presets eg elliptical etc. is appropriate. Also does not count calories for example 35 when the rest of the group is around 500

  Look does not recognize the weight class as exercise-how can you add the duration of activity manually because none of the presets etc for example elliptical is appropriate and therefore do not count toward the daily goal. Also does not count calories for example 35 when the average of the others in the group is around 500.

  Hello

  When you use the application of the training session, choose the type of activity that best fits your business. For anything else - like weight - select the other category.

  During the follow-up of one year to the next helps:

  • Activity app will credit the ring of progress of exercise with one minute for every minute of the workout.
  • Active calories will be based on the data recorded by the heart rate sensor or a brisk walk, whichever is greater.

  Note, however, that the heart rate sensor is likely to give better results for the workouts that involve rhythmic (for example running) rather than the irregular movements.

  More information:

  Use of the workout on your Apple Watch - Apple Support