Satellite Pro A40 - how to turn on wireless?

Similar Questions

• Satellite Pro L300 - how to turn on wireless?

  Hello

  my daughter got a new old laptop Satellite Pro L300 for 2 months. No questions then this week a wi - fi connection will not connect. Computer asks me to swich on the wireless card. When studied the wireless card does not appear on my devices and the button on the front does nothing. It worked fine for 2 months.

  Any advice?

  Concerning
  Steve

  Hello Steve

  Please check device manager again and let us know what the exact status of the WLAN card is it?
  Card WLAN registered properly or maybe with yellow question mark?

• Satellite Pro A40: How do I know if it is wireless?

  iI just had to reinstall all the software and hardware on a satellite pro A40 friends two or three years.
  I think, how whether it is wireless and which modem it is and how to access internet about this big question, looking for a big response.

  Thank you

  Hello

  I've studied a bit and found information that WiFi is not available on Satellite Pro A40.

  It s not a great answer but a very clear statement.

• Satellite Pro A40 - how to enter the BIOS

  I can get to safe mode, last known good configuration, but I forgot how to get BIOS. Please notify for the satellite Pro A40

  What and press ESC F1 immediately after power on

• Satellite R630 - 12G - how to turn off wireless communication?

  Hello!
  Whenever I start my laptop Satellite R630 12G I have to disable "wireless communication" (flashes orange when its turned on).

  How to 'OFF' by default?

  Hello

  I m not Satellite R630 owner and I still use card internal WLAN but you should look into the BIOS. According to the BIOS / motherboard, you can disable WLAN.
  Check this box!

  Alternative, you can disable the internal WIFI card in Windows Device Manager.

• Satellite Pro A40: How can I change the video ram

  Hi I have an A40 my Ram video machine is set to 16 MB maximum is 64 MB
  How can I change my 64 MB
  I tried the bios theres nothing in there that will change, I have the latest version of the bios of the machine V1.50

  what someone of nowhere leaving to do this please

  Jay

  Hello

  As much as I know the of A40 Satellite Pro supports the Intel 852GME shared memory graphic card.
  S control Intel cards automatically memory allocation.

  This means that if the graphic card must more 16 MB of memory, the graphics driver will share the part of main memory!
  The whole process runs automatically and you do not need to change anything!

• Satellite Pro L500 - how to turn on hardware virtualization?

  Hello

  Please can someone tell me how to activate it? I have updated the BIOS to 1.9 and still can not see as an option? Secureable tells me that this cell phone it will work, but it's off!

  Thank you very much

  Hi nickcrush,

  Hardware virtualization isn't according to the version of the BIOS, the question is if your CPU support this feature.

  Satellite Pro L500 are equipped with different s CPU, so I recommend the Intel page. Check the details of your CPU if it takes support this feature or not.

• Satellite Pro A40: How boot from CD?

  Hi all.

  I received an A40 to go there for a friend, and I'm fighting. He is currently a little cycling through the boot process. It does the same thing when I'm in the mode without failure of XP.

  In any case, I tried to run the recovery CD, but I can't to start their. I managed to get into the BIOS (hold the ESC key after turning on), but that only allows me to update the time system & the password (which is currently displayed in form "unregistered"). It shows the boot sequence in the HDD first, he performed successfully each time (but not far enough to be of any use). So, how to boot from a CD?

  I found an article for a 30 that said to press C during startup or the home screen Toshiba or F12 at the splash screen, but none of them seem to have no effect.

  Any ideas?

  Thank you

  Pete

  Yes, you may be able to activate the start on-screen menu by pressing F12 immediately after switch on/off the laptop.
  The C button should also allow booting from the CD/DVD drive.

  Try this several times. Usually, this should work if a malfunction of the computer laptop doesn t.

• Satellite L500-21R - how to turn off wireless?

  How can I switch because I don't use a lot the wireless and it is your power supply is not there a way to do to activate or disable the driver should not there be a tool or an application that do?

  Pomp l500-21r
  Windows 7 64 bit

  Hi samialawwad,

  Why you n t check your user manual? You can find an answer to your question so it s interesting to read. I put t understand why people don t do

  In any case, use the combination of keys FN + F8 to toggle the feature WLAN.

• Satellite L40 - 18Z - how to turn on wireless?

  I have Satellite L40 - 18Z running Windows Vista Service Pack 2.

  I've had a few cases where the wireless seems to have failed. On this instance, the LED at the front does not shine despite the switch is either off or on position. I checked the network card settings and it is activated. I have disabled/enabled the adapter, but without success. I uninstalled and reinstalled the driver - with no success. I checked for the latest drivers, but they are already installed.

  I also deleted and reinstalled the adjacent wireless card to memory, there still without success. The network and sharing Center diagnosis indicates only that the without wire must pass away - but I am unable to do so.

  Any advice would be welcome. Thank you.

  Hello

  The WIFI connection can be activated in different ways: with the hardware switch you have ever tried and key combination FN + F8.
  So have you activated the wireless network card by pressing FN + F8?

  From my own experience, I can say that the WLAN led is only if you use this key combination too.
  Check this box!

  In addition, you wrote on reinstall drivers WLAN you have installed you exactly? The most recent and pre-tested WLAN drivers, you can find the Toshiba site.

  Last but not least, I also updated the BIOS, if nothing else works.

• Satellite Pro A40 fell on the wireless network card; Damaged PCMCIA slot

  This morning my Satellite Pro A40 (Celeron 2.6) fell 40 cm. He fell right on the wireless network card that has been inserted. This card is still alive and so is the rest of the laptop, but the PCMCIA location is little damaged. I can insert PC cards almost completely, just the last piece (when the pins are) wrong.

  I removed the cover near the CPU, and there, I could see the inside PCMCIA slot; I could see the main part and the last part where the pins are. That little part as is pushed upward, as you can see in the pictures.

  I think I'd be able to fix myself this PCMCIA slot, but I can't remove it. I removed all the screws on the rear plate, but he is still blocked.

  Pics:

  PCMCIA slot

  The PCMCIA location; on the left, you will see the part with the pins, which is pushed upward. It's also what I see when I look at the pins in the PCMCIA slot. as they are pushed down, but I don't think they are folded.

  Wireless network card

  Wireless network card; It is a little damaged but it still works.

  Does anyone have an idea how I can remove the back plate, or another way to remove the PCMCIA slot and fix it?

  Hi Steve

  Well, I can give t well you not answer how you can just remove the PCMCIA slot.
  There are a lot of screws and to my knowledge, it is necessary to remove all covers and screws that are placed at the bottom of the unit and inside under the keyboard.
  Please check this specific device. Perhaps you have overlooked a few screws.

  But if it is impossible to remove the PCMCIA slot of the unit, I recommend to ask the service partner for a detailed instruction.

  Good luck

  Good bye

• Satellite Pro A300 - How can I turn on my webcam?

  Satellite Pro A300 - How can I turn on my webcam? Operating windows 7. The computer is clean.

  Hello

  The webcam can be used with programs like Skype communication where you can make a video call. Of course, there are other messengers or programs they use the webcam.

  But you must install the software/driver webcam that you can use. This software can be downloaded from the official website of Toshiba (Camera Assistant Software):
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• How to get LAn card work on my Satellite Pro A40?

  Hello

  I have a laptop Satellite Pro A40 series.
  My problem, I can not work LAN then I didn't install any network card.
  I try to get the Toshiba Web page LAN driver, but I have not found any exe installation inside.

  All files are installation information files and a few dll files a file any din and a Readme file reading and a uninstall files but no configuration.

  Can someone tell me how I can get my network to work please?
  Thank you very much
  Zoltan

  It is very easy.
  Download the LAN driver and run the files in the new folder created on your desktop. Go in Device Manager, and then open properties LAN card. You will find the option to install the driver. Follow the on-screen menu and navigate to this folder.

  All that s!
  Please try it out.

• Satellite Pro A40 (PSA45E) - How to Exchange old HDD?

  The HARD drive in five years by Satellite Pro A40 daughter old died recently. What type of HARD drive replacement is supported by the BIOS or am I limited to the Toshiba MK4025 only?

  Also, does anyone have an idea how to open the case without causing too much damage to the tabs in plastic molded?

  Thank you
  Trondheim

  Hello

  Theoretically, you can buy each HARD disk and it makes no difference which manufacturing you buy the HARD drive. But the uses of Satellite Pro A40 older hard drives with IDE interface as far as I know, and this means that you can not use hard s 128 GB drives or let due 120 GB limitation LBA 28 bits.
  120 GB would be the biggest HARD drive you can use.

  Normally, the HARD drive cover is only attached by two screws. Remove it, the cover and then to exchange the HARD drive.

• Satellite Pro A40-111 - Windows XP Pro Russia - how to change to Windows XP en

  Hi all

  I just bought the Satellite Pro A40-111, 2 days ago in Ukraine. Everything is OK except the OS, it is the version of WinXP Russia. I'm not one Russian or Ukrainian.

  Could Toshiba or someone could help me to config this OS to have the Interface in English WinXP?
  Please help me!
  Thank you very much.

  Hello

  for your Windows to speak another language, you need to go to stores and buy a Windows with this language. In your case, there is (at least not known to me) no way to change Windows English Russian Windows without having to reinstall the system from scratch - and not with an English Windows.

  When you do so, remember to add the drivers CD Utilties - and tools and in the exact order as described in the help on the CD HTML files.
  It is imperative to install drivers in the correct order to have the machine works correctly.

  Good luck

  Tom