Exceeded maximum data records

Similar Questions

• Governor limit exceeded in the generation of cube (data records Maximum exceeded)

  Hello
  
  I have a PivotTable that contains about 30 measures and the lines are also measures. The columns are the last 12 months, I get the following error when you try to view the results:
  
  Governor limit exceeded in the generation of cube (data records Maximum exceeded).
  Error details
  Error codes: QBVC92JY
  
  
  I checked view pivot instanceconfig.xml and these settings are set to higher values:
  
  < CubeMaxRecords > 100000 < / CubeMaxRecords >
  < CubeMaxPopulatedCells > 100000 < / CubeMaxPopulatedCells >
  < PivotView >
  < MaxVisibleColumns > 5000 < / MaxVisibleColumns >
  < MaxVisiblePages > 5000 < / MaxVisiblePages >
  < MaxVisibleRows > 100000 < / MaxVisibleRows >
  < MaxVisibleSections > 5000 < / MaxVisibleSections >
  < / PivotView >
  
  I do not know why this error pops up as the set of data is not large, there are 30 rows and 12 columns.
  
  I followed http://obiee101.blogspot.com/2008/02/obiee-controling-pivot-view-behavior.html
  
  Can anyone help?
  
  Thank you

  Hello

  Increase the size of CubeMaxRecords and CubeMaxPopulatedCells and check it out.

  600000
  600000

  See you soon,.
  Aravind

• Install HRCS9.0 and PT8.53 with Linux question: the files intiPT853.ora and initHRCS90.ora: exceeded maximum number of DB_FILES

  People,

  Hello. I installed PeopleTools 8.53 with Oracle Linux 5.10 successfully. The PeopleTools everything works fine in the browser at the beginning.

  After that I installed HCM and Solution Campus 9.0 Instance of database named HRCS90 in Linux successfully, PeopleTools 8,53 Database Instance PT853 can not be mounted. The error message is less to:

  SQL > startup
  ORACLE instance started.

  Total System Global Area 538677248 bytes
  Bytes of size 2146024 fixed
  528482584 variable size bytes
  4194304 buffers of data bytes
  Redo buffers 3854336 bytes
  ORA-00059: exceeded maximum number of DB_FILES

  In the home/user/OracleDB_Home/dbs/initPT853.ora file, its parameter db_files has 3 values: small 400, 1021 medium and large 1500. The initial value is 1021 and it works correctly at the beginning.  But after the implementation of another instance of HRCS90, the above error message and instance PT853 is not mounted. I change the value of db_files 1021 to 1500 in the initPT853.ora file and restart the Linux operating system. But get the same error as below:

  SQL > startup
  ORACLE instance started.

  Total System Global Area 538677248 bytes
  Bytes of size 2146024 fixed
  528482584 variable size bytes
  4194304 buffers of data bytes
  Redo buffers 3854336 bytes
  ORA-00059: exceeded maximum number of DB_FILES

  
  In the home/user/OracleDB_Home/dbs/initHRCS90.ora file, its parameter db_files has 3 values: small average 80, 1500 400 and large. I use db_files = 400 and it works properly. I start instance HRCS90 right after the above error message as below:

  SQL > shutdown immediate
  ORA-01507: database not mounted
  ORACLE instance stops.

  SQL > exit
  Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.1.0.6.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options

  [user@userlinux bin] $ export ORACLE_SID = HRCS90
  [user@userlinux bin] $. / sqlplus / as sysdba

  SQL * more: version 11.1.0.6.0 - Production on sat Nov 23 12:40:02 2013

  Copyright (c) 1982, 2007, Oracle.  All rights reserved.

  Connect to an instance is idle.

  SQL > startup
  ORACLE instance started.

  Total System Global Area 538677248 bytes
  Bytes of size 2146024 fixed
  528482584 variable size bytes
  4194304 buffers of data bytes
  Redo buffers 3854336 bytes
  Mounted database.
  Open database.

  SQL > select * from psdbowner;

  DBNAME OWNERID
  --------          --------
  HRCS90 MYNAME

  SQL >

  
  As we see above, the HRCS90 instance work corretly, and PT853 does not start. Parameter DB_FILES the file initPT853.ora has a problem.

  My question is:

  1021 and 1,500 is not enough for a starting PT853 instance, what value should be used for the the file initPT853.ora DB_FILES?

  Thank you.
  
  

  user8860348 wrote:

  People,

  Hello. I installed PeopleTools 8.53 with Oracle Linux 5.10 successfully. The PeopleTools everything works fine in the browser at the beginning.

  After that I installed HCM and Solution Campus 9.0 Instance of database named HRCS90 in Linux successfully, PeopleTools 8,53 Database Instance PT853 can not be mounted...

  I'm sorry, but I do not understand that "Instance" means here.

  > In the file home/user/OracleDB_Home/dbs/initPT853.ora, its parameter db_files has 3 values: small 400, 1021 medium and large 1500.

  Are you do not use a spfile? The file actually contains 3 values? What's the latest? Have you checked the value in the database side "see the db_files parameter?

  > But after set up another instance of HRCS90, the above error message and instance PT853 is not mounted

  Still, I don't know what that means.

  > In the file home/user/OracleDB_Home/dbs/initHRCS90.ora, its parameter db_files has 3 values: small average 80, 1500 400 and large. I use db_files = 400 and it works properly.

  Once again, 3 values? What's the latest? Have you checked the value in the database side "see the db_files parameter?

  > As we see above, the HRCS90 instance work corretly, and PT853 does not start. Parameter DB_FILES the file initPT853.ora has a problem.

  Again, I don't understand what exactly are HRCS90 and PT853. Can not help.

  > 1021 and 1,500 is not enough for a starting PT853 instance, what value should be used for the the file initPT853.ora DB_FILES?

  I am sure, you have not a problem with this setting, 1500 files in the database is fairly large. Recently, I've built a demo, the default 1021 was ok for me. You should have done something wrong somewhere.

  Nicolas.

• Maximum date in OBIEE

  I have a requirement that needs to pick up the maximum date of different status for a ticket.
  for example, a ticket is fired and goes through the change of different status from A-B-C-D-E with different dates, when the State went A-B/B-c as well as on.
  
  My requirement is to display a column in the SPR, which would take the maximum date for a ticket (in what situation it may be) and calculate the number of days he sits in this status (i.e. no of days from the time the ticket is opened and the maximum date).
  
  I'm not able to make anything work like this in the RPD, please help me with ideas.
  
  Thank you

  I'm assuming you had hierarchy defined for the table Report_vw1 and the status column sits on any level
  Create a logical column with the phrase max (a.dt)
  and then properties-> content tab
  set the level as the column-level status

  If this does not help you then send me your RPD with version record and pwd of it to sveerava@gmail

• How to read the heart rate data recorded by the Apple Watch?

  My wife wears a Apple Watch and suffer from power cuts irregulars. After the last of them, I checked the data through the health app and saw that at the time of the blackout, there seems to be no saved data. A range of heart rate was recorded both before and after the blackout. Can someone explain how the data record? Thank you

  MIchael Gilmore

  This explains the various triggers causing the heart rate measure:

  Measure your heart rate with your Apple Watch - Apple Support

  Here is some additional information:

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

• VBAI2014 fast data recording

  I work with a VBAI.vi which captures images of a dual GigE camera and a cRIO information. It is supposed to recover information quickly and write them on a hard drive.

  The procedure looks like this (you can also see them in the picture ' "operating mode." ") JPG'):

  1. The image is entered via dual-gig-e and the module "image acquisition.
  2. Via the "Calculator" module, the name of the file is determined and several variables are read via a cRIO network.
  3. Through the module "data record" variables are written in a .csv file in the hard drive.
  4. Via the 'image' module, the acquired image is written as a .tiff file to hard shore.

  Our camera is able to charge up to 19 frames per second per double Gig-Ethernet. To avoid a passing image-guy, we need to acquire and write the information on the hard disk in seconds 1/19--> ~ 50 milliseconds.

  As you can see in the "" measures. "" "JPG", the procedure takes between 80 and 100 ms, the slowest of the modules seems to be "data record" stage which takes 44 ms, which seems strange because it appears less elaborate than the image logging. You can see the data that are saved in "" forest operations. "" JPG ".

  You have an idea how I can speed up this process? I thought to write a LabVIEW VI, which records data from worksheet instead of using the module "data record" of the VBAI, but I don't know how to run VI in VBAI.

  These delays are not by the speed of the hard drive, I get similar results on a virtual disk.

  Thank you very much for the help!

  Sincerely,
  Paul

  Here are some tips to improve performance:

  1. make sure that you uncheck "Display result Image for that State" upstairs to the left of the script of inspection box. This, for all your States to improve performance. I think the Datalogging might look like he takes so long because the update of the display is asynchronous, and whenever the operating system decides to redraw the image, it can happen to be whenthe datalogging step is running.

  2. make sure that you run in mode of inspection. Configuration mode adds a lot of delays, so you can see the status of the inspection

  3. you can try logging of images and data in the background (there is a setting in steps). This will not be guaranteed that each image is saved but if you get images faster your hard drive can connect to them. If this is the case, you may want to consider:

  -Get a faster as HD and SSD.

  -Try different file formats (BMP or JPG can be faster than tiff)

  -Make sure that you are not including the overlay to the image since this converts into a color image and can produce much more to save on disk images.

  4 try to run the 64-bit version of the VBAI to improve performance.

  5. do you have a fast PC you run this on?

  As a quick test of validation, open the attached inspection. I put a CQI simulation in the State of the installation (view > view full Inspection Setup, then click the installation state in the box on the left toolbar). Then choose Run > Benchmark Inspection with 50 iterations and see how long the image is logging. This will give you an idea of just how fast your hardware can support saving to disk. Try various formats such as JPG, BMP, PNG image, etc. as different PC configurations will have different performance.

• Download the data recorder of NOR

  How can I download the data recorder of NOR?

  It depends on what OS you are using and what data logger you talk.  Do you mean Signal Express or the data recorder included with the NOR-DAQmx Base driver?

  Signal Express for Windows

  NOR-DAQmx Base for Mac OS X, Windowsor Linux (Mandriva, OpenSUSE, Red Hat WS 4 or 5 only).

• RVS4000 - how to achieve a maximum data rate

  I have little experience in the configuration of a router.  Also, I don't know what the maximum data rate may be for this router.

  Right now, the router is limiting my internet speed compared to what the cable modem can provide...

  So far, I know that when I plug my computer directly to the output of the Modem cable Motorola and run a speed Test on my Charter cable connection, the test shows ~ 50 MB/s for downloads and ~ 5 Mbps for downloads.  It would be great, but I have several computers and need to use a router/gateway to feed my local network.  When I insert the RVS4000 router between the modem and the computer, the speed Test result to ~ 16 Mbps for downloads and stay ~ 5 Mbps for downloads.  During this test, there is no other computer online through the router.  16 Mbps is not lousy, I would like to realize the full value... is it possible?

  The RVS4000 unit is capable of 50 Mbit/s to 30 Mbps?  How to configure the router to reach the maximum available download speed?

  There is a Setup page of the router that has parameters right now set at 50000 Kbps Upload and 60000 Kbps by downloading; for me, this means that the router is capable of such speeds.

  Anyone, please give me a hint on what step to take next to solve this problem, if possible...

  Thank you

  Hi James, you can disable IP addresses and you will probably see what you expect.

  -Tom
  Please evaluate the useful messages

• Exceeded maximum activations

  We recently bought a new computer and deleted the program to creatvie cloud on this computer. Now we installed on the new computer, but it does not work. We get the error "exceeded maximum activations. What can we do to fix this?

  Removal of facilities is not the way to manage the fence installation creative cloud.  You must disconnect before the uninstall (removal of not).

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Exceeded maximum number of simultaneous processes of IDE.

  In SQL Developer 4.0 EA1, when run several sdcli commands, I get after error message. Where can I change the IDE process simultaneous max?

  Exceeded maximum number of simultaneous processes of IDE.

  Vishal

  http://blog.vishalgupta.com

  So, apparently, that he is a hard-coded limit (4) the framework, we are trying to solve that.

• Maximum Date of Oracle query

  I need help in creating a query
  
  Select a.job_number, a.title, a.request_date, a.completion_date, b.modification_number, b.actual_cost, b.shop_facility_percentage, d.status_date
  Of
  survey_jobs one
  outer join left survey_job_bundles b
  on (a.survey_job_id = b.survey_job_id)
  Join external survey_job_status d on left (b.survey_job_bundle_id = d.survey_job_bundle_id)
  order of a.job_number CSA, CSA b.modification_number
  
  This query generates a report which duplicates some lines. It does because I join a child at the table who has a to-many with its parent. The child table can have many dates (d.status_date). I want to get the maximum date of the child table. I created a function max that I tried to plug it, but when I plug it right under the last outer join, it reduces my results to report.
  
  
  Here is my attempt at office max
  
  AND b.SURVEY_JOB_BUNDLE_ID = d.SURVEY_JOB_BUNDLE_ID
  AND ((d.SURVEY_JOB_BUNDLE_ID IS NULL) OR)
  (d.SURVEY_JOB_BUNDLE_ID, d.STATUS_DATE) IN
  (SELECT SURVEY_JOB_BUNDLE_ID, MAX (STATUS_DATE) OF)
  SURVEY_JOB_STATUS OF SURVEY_JOB_BUNDLE_ID GROUP))
  
  
  Can someone help me with this? Thanks in advance
  
  Published by: 963510 on January 9, 2013 11:17
  
  Published by: 963510 on January 9, 2013 11:22
  
  Published by: 963510 on January 9, 2013 11:23

  A solution could be...

  select a.job_number,
         a.title,
         a.request_date,
         a.completion_date,
         b.modification_number,
         b.actual_cost,
         b.shop_facility_percentage,
         ( select max(d.status_date)
             from survey_job_status d
            where b.survey_job_bundle_id = d.survey_job_bundle_id
         ) status_date
    from survey_jobs a
    left outer join survey_job_bundles b on (a.survey_job_id = b.survey_job_id)
   order by a.job_number asc,
            b.modification_number asc
  

  / Kenny

• Error: Members similarly on the data recording in double size

  Hello
  
  When loading in the cube, I get an error staing
  "Members of the same size on the data record"
  
  But I don't see duplicates in the master table or in the dimension tables.
  
  How can we find these duplicates?
  
  Thanks in advance.
  
  -Shema

  Hello
  See this response from John Goodwin:

  https://KR.forums.Oracle.com/forums/thread.jspa?threadID=2264153

  See you soon

• Find the next available date which is not necessarily the maximum Date

  Morning people!
  
  I'm trying to find the next date of appointment (including any day after today) for a patient who may not be the maximum date for this person. I am doing this in Oracle Forms. My query works in SQL * more, but does not work in forms.
  

  FUNCTION get_next_sched_date(P_PATIENT_ID in varchar2) RETURN DATE IS
    v_next_scheduled_date   patient_visit.target_date%TYPE;
  
  BEGIN
    select next_target_date into v_next_scheduled_date
    from   ( select v.*, max(target_date) over (partition by patient_id) max_target_date,
                         lead(target_date) over (partition by patient_id order by target_date) next_target_date
             from   patient_visit v)
    where  patient_id = P_PATIENT_ID
    and    next_target_date >= SYSDATE
    and    max_target_date > next_target_date;
  
    return( v_next_scheduled_date );
  
  EXCEPTION
     when NO_DATA_FOUND then
       return(NULL);

  When I compile in Oracle Forms, it gives me an Error.Encountered symbol "(" quand attend une deles de valeurs suivantes:, de.) "
  
  I also noticed that Oracle Forms is not taste keywords such as LAG and LEAD. I'm working on Oracle Forms 9i.
  
  No idea what I'm doing wrong here? Thanks for listening to my harping on Monday. :-)
  

  Forms [32 Bit] Version 9.0.4.0.19 (Production)
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production

  Published by: Roxyrollers on August 27, 2012 08:43
  
  Published by: Roxyrollers on August 27, 2012 08:46

  Hello

  The forms PL/SQL engine is never at the same level as the database one. It seams that you are using an older version of forms.

  François

• Maximum data store

  I have a control panel of 12 to attached.  With a RAID 6 configuration, I'm able to get 9,09 TB of usable space.  With the help of ESXi 4.1 is the maximum data store size 2 TB?  I find no documentation indicating the maximum size for a data store.

  Yes, the maximum size for a data store is 2 TB - 512 b header

• How to save a calendar I created with the photo and the dates recorded on separate pages?

  How to save a calendar I created in photoshop with the photo and the dates recorded in the form of two separate pages?  When I save in pdf or jpeg, they are automatically save 1 pg with dates and photos on a single page.  This is causing problems when I print.

  Hi there, in which case your printer is not very large, you can also trim down the two versions and print them as separate documents.

  (1) create a guide where you want to split the pages by clicking on the rule (hit control R if they are not displayed) and dragging to the desired location.

  Create the Guide to make it so be precise in the way which divide you your page, and so that no part of the image will be repeated or lost.

  

  (2) select the Cropping tool and adjust the area of culture at half top of your agenda, using the guide you have just made to align with the right place. Press return to complete the harvest.

  

  (3) go in file > save as the. Name the file something like calendar_top and select the desired file format. Press "Save".

  

  (4) once you return to your calendar file, go to the history Panel and select 'Guide to flirting This will bring you to step before you cropped the image.

  

  

  (5) repeat the steps as before to the bottom half of the schedule, once more, using the guide to help you make your growing area.

  

  

  

  Then you would just print each of the two pages individually. The images does not appear in a single document, but if you have Acrobat you could combine the files.

  I hope this helps!