Excel and the CASE statement.

Similar Questions

• Syntax of the case statement / WHEN

  The table I use a depreciation per fiscal year and the fiscal period.  I try to have the amount of depreciation to go to 2 different columns based on the fiscal year and the fiscal year.  I'm doing it with a nested case statement. I know that is not correct, because I get the message ORA-00905.  I'm relatively new to sql and it is contribtuing to my problem as well.  Here is the code I have and suggestions / corrections would be appreciated.  Thanks for the help...

  SELECT

  lao PDR. DEPTID as DEPTID,

  lao PDR. ASSET_ID as ASSET_NO,

  PA. Descr as DESCRIPTION,

  lao PDR. ACCOUNT_AD as AD_ACCT,

  PDL. DE_ACCT, to take into ACCOUNT

  lao PDR. ADEATH as AMT_DEPR,

  PDL. JOURNAL_ID as JRNL_ID,

  PDL. JOURNAL_DATE as JRNL_DT,

  lao PDR. FISCAL_YEAR as FY,

  lao PDR. ACCOUNTING_PERIOD AP,

  CASE

  WHEN RDP. FISCAL_YEAR = 2014 THEN

  WHEN RDP. PERIOD ACCOUNTANT = 11 THEN pdr. DEPR

  END AS CURR_MONTH,

  CASE

  WHEN RDP. FISCAL_YEAR <>2014

  WHEN RDP. ACCOUNTING PERIOD <>11 THEN pdr. DEPR

  END AS PRIOR_MONTH

  OF PS_DEPR_RPT pdr

  INNER JOIN PS_DIST_LN pdl

  THE pdl. BOOK = pdr. BOOK

  AND pdl. BUSINESS_UNIT = pdr. BUSINESS_UNIT

  AND pdl. FISCAL_YEAR = pdr. FISCAL_YEAR

  AND pdl. ACCOUNTING_PERIOD = pdr. ACCOUNTING_PERIOD

  AND pdl. ASSET_ID = pdr. ASSET_ID

  AND pdl. CF_SEQNO = pdr. CF_SEQNO

  INNER JOIN PS_ASSET PA

  WE pa. ASSET_ID = pdl. ASSET_ID

  AND pa. BUSINESS_UNIT = pdl. BUSINESS_UNIT

  WHERE

  lao PDR. BUSINESS_UNIT = "A0465.

  AND pdr. BOOK = 'RUN '.

  AND ((pdr. FISCAL_YEAR = 2014 AND pdr. ACCOUNTING_PERIOD = 11) OR (pdr. FISCAL_YEAR = 2014 AND pdr. ACCOUNTING_PERIOD = 10))

  Hello

  2713822 wrote:

  Thank you... I appreciate the information you provide when you answer these questions.  I always try to get the amount (from the same column) for 2 rows in different columns.  I tried the LAST_VALUE and LAG but it took a long time for the queries to run, I'm looking for another way to do the same.  I'm only using SQL to retrieve data.  I don't have the ability to create or insert.

  I looked the information above and the CASE statement to look like this:

  CASE

  WHEN RDP. FISCAL_YEAR = 2014

  AND pdr. ACCOUNTING_PERIOD = 11

  THEN the RDP. ADEATH AS CURR_MONTH

  ON THE OTHER

  lao PDR. ADEATH AS MONTHS PREVIOUS

  END

  But I'm now getting an "ORA-00905: lack of keyword" message.

  What I'm trying to do is to draw 2 lines 1 to 2014 / 11 and another for 2014 / 10.  The amount for the period 2014 / 11 should go in the current column and the amount for the period 2014 / 10 should go in the previous column.

  Before current assets management

  01 AB01 50.01 50.03

  ....

  If you want to give an alias for a column, then you can say "AS nome_alias" after that tell you what that is in this column.

  'AS nome_alias' applies to the entire column.  Cannot use 'alias_name' in the middle of an expression, for example, in the middle of a CASE expression, before the END keyword.

  If you want to have 2 separate output columns, curr_month and prior_month to your output, you must then 2 separate columns in your SELECT clause.  for example:

  SELECT pdr.branch

  pdr.asset

  CASE

  WHEN pdr.fiscal_year = 2014

  AND pdr.accounting_period = 11

  THEN pdr.depr

  END AS curr_month

  CASE

  WHEN...

  THEN...

  END AS prior_month

  PDR

  ;

  If post you some sample data (CREATE TABLE and INSERT statements), the results and explanations, I could show you how to complete the... sections.

  To find out what version of Oracle you have, use

  SELECT *.

  SINCE the release of v$.

  The output can be messy, like this:

  BANNER

  -------------------------------------------------------------------

  CON_ID

  ----------

  12 c Oracle database Release 12.1.0.1.0 - 64 bit Production

  0

  PL/SQL Release 12.1.0.1.0 - Production

  0

  CORE Production 12.1.0.1.0

  0

  AMT for 64-bit Windows: Version 12.1.0.1.0 - Production

  0

  NLSRTL Version 12.1.0.1.0 - Production

  0

  The important thing is the number 5 parts on the first line; 12.1.0.1.0 in the example above.

• call the statement box inside the case statement

  I am writing a program which requires me to run a statement box inside another case statement. Although this sounds like a simple thing, I need to be able to call the case statement using a sequence structure, where s1 sends the true value to the case, s2, a fake. Then I need to record the results of this instruction box in a text file. Attatched is a simplified version of what I'm trying to do. Please note that the way my program runs may not call the case statement without using a sequence structure, two nesting box instructions is not feasible. I hope someone out there can help me because I was stuck trying to find this for awhile.

  Thank you

  LVStudent wrote:

  [...] I can't call the case statement without using a sequence structure

  Yes you can.  You just need to be smart.

  LVStudent wrote:

  I don't think I can use a state machine to fix this.

  I think you probably can.

  With respect to your original post. What are these s1 and s2 are you talking about?  My opinion on the matter, it is that you want to select a case based on the values of several controls Boolean.  If this is correct, I do this:

  

  Build your Boolean controls in a table, convert the table number and insert it into the structure of your business.  No button pressed = 0, s1 = only 1, s2 = only 2 both = 3.   This works for Boolean values as much as you want and is an easy way to make a decision that depends on many entries.

• using the case statement

  
  Hello

  How can I convert a code for the below sql case statement:

  If)

  (length of (tmp_co_orig_val) < = 0 OR tmp_co_orig_val < = 0 OR tmp_co_orig_val == 1 OR tmp_co_orig_val > = 9999999)

  OR

  ((tmp_co_orig_val == 999999 AND (length of (tmp_rcr_orgn_ltv_rt) < = 0 OR tmp_rcr_orgn_ltv_rt < tmp_rcr_orgn_ltv_rt > 1.3 GOLD 0.15)))

  Start

  tmp_collatvalue = «»

  tmp_msg_cd = 115

  end

  Is the case statement below that I wrote is correct. I don't have an environment now to test.  Please advice.

  BOX WHEN (CHAR_LENGTH (tmp_co_orig_val) < = 0 OR tmp_co_orig_val < 0 OR tmp_co_orig_val = 1 OR tmp_co_orig_val = > = 9999999)

  OR (tmp_co_orig_val = 999999 AND (CHAR_LENGTH (tmp_rcr_orgn_ltv_rt) < = 0 OR tmp_rcr_orgn_ltv_rt < tmp_rcr_orgn_ltv_rt > 1.3 GOLD 0.15))

  THEN tmp_collatvalue IS NULL AND tmp_msg_cd = 115

  END

  Hello

  937454 wrote:

  Thanks Frank. Really helps. But I have to write a sql statement

  But can you also specify, if I made a mistake in my code, or it's ok.

  There are no CASES reported in Oracle SQL.

  Oracle SQL has BOX expressions, but they only return a single value.  You cannot set 2 columns in the same expression BOX.

  Perhaps the best thing to do in pure SQL for you is to write a CASE expression, very similar to the CASE statement above, in a subquery and use the results of this in 2 separate expressions of BOX (very simple) in a Super application.

• Understand the CASE statement

  I got confused on this CASE

  (1) SELECT BOX WHEN 111 = "111" THEN 'YES' ELSE ' ' END OF THE DOUBLE - YES

  (2) SELECT CASE WHEN COALESCE (111 111) DOESN'T = "111" THEN 'YES' ELSE ' ' END OF THE DOUBLE - YES

  (3) SELECT CASE WHEN COALESCE (111, '111') = '111' THEN 'YES' IS ' ' END OF THE DOUBLE

  ORA-00932: inconsistent data types: expected NUMBER obtained TANK

  What exactly the things happening between 2 & 3. ' nt it implicitly convert as case 2 is because that in case 3, the first value is anyway not null as CAS2... This leads to confusion.

  I have read the Oracle documentation and there is an implicit data type conversion table. It also indicates that can be converted. There is always some confusion raised. Anyone could wrap this confusion?

  No, the function coalesce requires that all entries to be of the same data type because they are arguments of this function.

  Conversion of implicit data type occurs generally when things are compared with operators (as you do in examples 1 and 2.

  There is not many functions/procedures of this nature that the mixed data types and convert them for you.

  So, it is nothing to do with the CASE statements, it's in with him COALESCE function.  It is overloaded for particular data types, but it requires all arguments to be of the same data type.

• Help: How to use the Case statement in the ODI11g Interface?

  Hello
  My basic source I get 'Year' values and I want that these values result code in the interface and after translation want to push on the target system.
  Example:
  Database source, I get value for
  Year
  2010
  2011
  2012
  
  When I get the year 2010 I want to change the value in "FY10".
  When I get year 2011 I want to change the value in "FY11.
  and even for the year 2012 to "FY12.
  I've tried to make the Case statement, but had no success.
  I don't want to create the lookup table in the source system.
  Any help in this matter.
  
  Thank you
  
  Concerning
  Sher
  
  Published by: Sher Ullah Baig on August 26, 2012 17:52

  CASE
  WHEN source_column = '2010' THEN 'FY10.
  WHEN source_column = '2011' and THEN 'FY11.
  WHEN source_column = '2012' and THEN 'FY12.
  END

• NOT IN clause in State of the CASE statement does not

  Dear friends,
  
  I want to use on the condition in the WHERE clause of my SELECT statement.
  
  WHERE <>...
  <>...
  AND eihf.exr_aip_asset_sid NOT IN
  (CASE when safa.fund_relation = 'C' and safa.fund_account_code! = vFundAccount)
  SO (37874,37909,43424,55040,59513,59598,58570,76148,75885,75927)
  ON THE OTHER
  (0)
  END
  )
  
  But it gives me an error like "missing of good parenthis."
  
  Help, please.
  
  Kind regards
  Jonathan

  You can not write a list of values within the case statement.

  try something like this,

   WHERE
  <------------->
     AND CASE WHEN safa.fund_relation = 'C' AND safa.fund_account_code != vFundAccount
           THEN eihf.exr_aip_asset_sid ELSE 1 END
         NOT IN (37874, 37909, 43424, 55040, 59513, 59598, 58570, 76148, 75885, 75927)
     AND CASE WHEN safa.fund_relation = 'C' AND safa.fund_account_code != vFundAccount
           THEN 1 ELSE eihf.exr_aip_asset_sid  END != 0;
  

• Question of the CASE statement

  Is it OK to mix conditions inside the case statement? as for example:
  
  SUM (CASE WHEN b.SUPPLIER_NUM = 12345 AND c.VPN IN ('3245', '5345', '87894') THEN a.TRAN_AMT ELSE 0 END) SUMSPEND_MOS
  
  ???
  
  I put in parentheses between the two conditions?
  
  SUM (CASE WHEN (b.SUPPLIER_NUM = 12345 AND c.VPN IN ('3245 ', '5345', ' 87894')) THEN a.TRAN_AMT ELSE 0 END) SUMSPEND_MOS
  
  is this legal syntax? because its not complaining do not, but I want to just make sure that these things are good to use and the data comes right back.
  
  Thank you!

  Kodiak_Seattle wrote:
  Is it OK to mix conditions inside the case statement? as for example:

  SUM (CASE WHEN b.SUPPLIER_NUM = 12345 AND c.VPN IN ('3245', '5345', '87894') THEN a.TRAN_AMT ELSE 0 END) SUMSPEND_MOS

  ???

  Yes, you can do that. The conditions must be related somehow.

  I put in parentheses between the two conditions?

  SUM (CASE WHEN (b.SUPPLIER_NUM = 12345 AND c.VPN IN ('3245 ', '5345', ' 87894')) THEN a.TRAN_AMT ELSE 0 END) SUMSPEND_MOS

  You have no need, but if it helps you (or one who has to maintain the code) to understand it better, then go ahead. The cost can be one millisecond extra when the query is compiled (it will run everything as fast so be it), and the benefits can be enormous.

  I find that formatting code contributes much more clarity to have additional parentheses. Why not use something like that?

  SUM ( CASE
            WHEN (    b.SUPPLIER_NUM     = 12345
              AND  c.VPN           IN ('3245', '5345', '87894')
              )
        THEN a.TRAN_AMT
        ELSE 0
        END
      )          AS SUMSPEND_MOS
  

  If you have really complicated conditions, where you mix ANDS and ORs, then you should certainly use parentheses. It goes the same for the WHERE clause.

  is this legal syntax? because its not complaining do not, but I want to just make sure that these things are good to use and the data comes right back.

  The syntax is fine.
  If the data comes in good or bad is another matter. What data are, and what you mean by 'comes back good' (in other words, what results do you get off these data)?

• Problem of the CASE statement

  Hi all
  
  I need to replace the value selected,
  
  Here's the query... make a mistake... make me ORA-00923: KEYWORD not found or provided.
  
  Could you please correct me.
  
  SELECT sper.assettxt =
  CASE
  WHEN (select description of flv fnd_lookup_values where flv.lookup_type = 'ZZCUS_SPER_ASSET_CODES'
  and flv.description = sper.assettxt);
  (select the meaning of flv fnd_lookup_values where flv.lookup_type = 'ZZCUS_SPER_ASSET_CODES'
  and flv.description = sper.assettxt)
  NVL (resp_cat. (Text, 'Total');
  NVL (SUM (DECODE (sper.author_create_ta_interval,' < = 24 h, sper.total, 0)), 0) day1.
  NVL (SUM (DECODE (sper.author_create_ta_interval,' < = 48 but > 24', sper.total, 0)), 0) day2.
  NVL (SUM (DECODE (sper.author_create_ta_interval,' < = 72 but > 48', sper.total, 0)), 0) day 3,.
  NVL (SUM (DECODE (sper.author_create_ta_interval,' > 72 h, sper.total, 0)), 0) day4.
  NVL (SUM (DECODE (sper.author_create_ta_interval, "N/a", sper.total, 0)), 0) 'open ',.
  NVL (SUM (sper.total), 0) "Grand Total".
  (SELECT "point proven" TEXT data)
  OF THE DOUBLE
  UNION
  SELECT "data updated item.
  OF THE DOUBLE
  UNION
  SELECT "other answers.
  Resp_cat FROM DUAL)
  LEFT OUTER JOIN
  (SELECT assettxt,
  s.sper_status_text,
  s.author_create_ta_interval,
  Total COUNT (*)
  OF s zzcus.zzcus_sper_data
  WHERE 1 = 1
  AND s.sper_dates =: P_SR_DATES
  AND s.sper_month = substr(:P_SR_DATES,5,2)
  AND s.customer_id =: P_CUSTOMER_ID
  - AND s.task_inquiry_type AS ' descriptive data Challenge %.
  AND s.assettxt <>'! MAD
  S.assettxt, s.sper_status_text, s.author_create_ta_interval)
  SPER partition by (SPER. ASSETTXT)
  ((CASE
  WHEN sper.sper_status_text = "data confirmed."
  THEN
  "Question confirmed the data.
  WHEN sper.sper_status_text = "updating data"
  THEN
  "Item updated data.
  ON THE OTHER
  "Other answers.
  END) = resp_cat.text)
  GROUP BY ROLLUP (resp_cat.text), sper.assettxt
  ORDER BY sper.assettxt, (CASE resp_cat.text
  WHEN 'confirmed data element' THEN 1
  WHEN 'updated data element' THEN 2
  WHEN "Others" THEN 3
  END)
  
  
  
  
  I need to replace sper.assettxt with the meaning of fnd_lookup_values table.
  
  
  
  
  -

  Well, it is interpretation since I'm guessing by your intention with the CASE statement.

  Do you mean

  CASE
  WHEN EXISTS
     (
        SELECT
           description
        FROM
           fnd_lookup_values flv
        WHERE
           flv.lookup_type  ='ZZCUS_SPER_ASSET_CODES'
        AND flv.description =sper.assettxt
     )
     THEN
     (
        SELECT
           meaning
        FROM
           fnd_lookup_values flv
        WHERE
           flv.lookup_type  ='ZZCUS_SPER_ASSET_CODES'
        AND flv.description =sper.assettxt
     )
  END, 
  

  If yes then it is much better represented as

     (
        SELECT
           meaning
        FROM
           fnd_lookup_values flv
        WHERE
           flv.lookup_type  ='ZZCUS_SPER_ASSET_CODES'
        AND flv.description =sper.assettxt
     )
  

  Assuming that the code returns 0 - 1 line (no more and you will get an error).

• Use the CASE statement in a query of LOV

  Hello
  
  I wrote a select statement to be used in my list of values query, and it works fine when I run with SQL Developer. But when I put it in the LOV I get the LOV query is invalid error message. Here's the query I use:
  

  select 
      case when nt.COMMON_NAME is not null then nt.COMMON_NAME || ' (' || nt.TAXON_NAME || ')'
          else nt.TAXON_NAME
      end display_species
     ,case when nt.COMMON_NAME is not null then nt.COMMON_NAME || ' (' || nt.TAXON_NAME || ')'
          else nt.TAXON_NAME
      end return_species
  FROM NBN_TAXON nt
  WHERE lower(nt.INPUT_CATEGORY) = decode(lower(:P312_TAXON_GROUP_ADD), 'fish', 'fishes', lower(:P312_TAXON_GROUP_ADD))     
  order by 1;

  If the CASE statement is the source of the problem?

  Hello

  Try to remove the colon semi at the end.

  See you soon

  Ben

• TDE is not "transparent" to the CASE statement

  Hello
  
  I have installed oracle (10) database with TDE. It works very well with almost all queries. But I have problems when I try to use the CASE statement.
  
  
  He comes to the table, I created:
  
  {color: #0000ff} create table t_test)
  col1 varchar (128)); {color}
  
  This query returns an empty result (as planned, because there is still no data in the table).
  
  {color: #0000ff} to select)
  When col1 = 'test' then 'test '.
  end) as Carter
  of t_test
  {color}
  I now encrypt the column with the following statement:
  
  {color: #0000ff} change alter table t_test (col1 encrypt using "AES256" without salt); {color}
  
  And try again the same statement:
  
  {color: #0000ff} to select)
  When col1 = 'test' then 'test '.
  end) as Carter
  of t_test
  {color}
  He now returns {color: #ff0000} ORA-00932 inconsistent data types: expected BINARY got {color} CHAR
  
  But if I try:
  
  {color: #0000ff} select *.
  of t_test
  {color}
  There is no errors (returns empty result, as expected).
  
  I tried even with data, with the same result.
  
  Could someone please tell me what I'm doing wrong here?
  
  Thank you.

  You touch the Bug 6262107 'ORA-932 of the CASE expression sought with encrypted column:

  Description:
  "ORA-932 incompatible data types: expected BINARY got TANK ' is triggered.
  on a query with a case expression sought on a column with TDE.

  for example:
  CREATE TABLE TDE_TEST (COL1 VARCHAR2 (1));
  INSERT INTO TDE_TEST VALUES('1');
  ALTER TABLE TDE_TEST CHANGE (COL1 ENCRYPT WITHOUT SALT);
  SELECT CASE WHEN COL1 = '1', THEN 'A' OF ANOTHER END 'B' OF TDE_TEST;
  ^
  ORA-00932: inconsistent data types: expected BINARY got TANK

  Workaround solution:
  Convert a simple case of the searched case expression expression.

  So, I updated the sql works:
  SQL > select (case col1
  2 when 'test' then 'test '.
  3 end) as Carter
  4 * of t_test
  /
  no selected line

  I hope this helps.

• Required: a portable charger for an iPhone 4 that can be used in Germany and the United States

  Required: a portable charger for an iPhone 4 that can be used in Germany and the United States

  Does anyone have recommendations?

  The original charger is International, all you need is a converter of pin code.

• Problem with the event and the case of Structure

  Hi all,

  I get the problem in my program, I'm using the two structure one is the same and other structure box.

  In the structure of the case, I had the button as an entry to the SPL and the case structure as the output of the structure of the case.

  And in the same, then I had the two text box (num control A and B) in that I had put the event changes its value. Then, even I put the value has

  num or num B control control control this corrosponding num value will save seeing num C. Now the problem is when I click on

  the theLEB button does not blink until or if you don't put the value of one of the corrosponding num control.i didn't post my file in version 8.5 and 8.6 Please find tha.

  Hello

  It should work like that or I misunderstood what you want to do.

  If Boolean is true, boolean 2 is true, at the same time, you can change the value of A so C or B then C.

  See attachment

• EXTRACT function can be used directly in the CASE statement WHEN

  I wrote the following SELECT statement. The function 'calc_time_diff' is a stored function that subtracts two timestamps and returns the result to the total number of seconds. My DBA does not 'calc_time_diff' as a stored function, then, I replaced the third line (in bold) in the SELECT statement with this:

  COUNTY ( BOX WHEN (extract (DAY OF v_end_ts-v_st_ts) * 24 * 60 * 60) +)

  (extract (HOUR FROM v_end_ts-v_st_ts) * 60 * 60) +.

  (excerpt (v_end_ts-v_st_ts MINUTE) * 60) +.

  extract ((DEUXIÈME à PARTIR de v_end_ts-v_st_ts) < 3600 THEN 1 END) less_than_1_hrs_count

  But the CASE above does not work. It returns the same value as COUNT (*). If the total number of tickets is 32 output will be

  total_tickets less_than_1_hrs_count

  32                                 32

  If I call the "calc_time_diff" then I get the correct result. What I'm doing wrong here?

  **********************************************************************************************************************************************************************

  SELECT

  Count (*) total_tickets,

  COUNTY ( CASE WHEN END of calc_time_diff (t.created_date, h.closed_date) < 3600 THEN 1) less_than_1_hrs_count

  OF n01.cc_ticket_info t

  JOIN IN-HOUSE

  (SELECT ticket_id, MAX (created_date) closed_date

  OF n01.cc_ticket_status_history

  WHERE ticket_status = 'CLOSED' AND created_date > = 18 August 2013 ' AND created_date < (to_date('08/24/2013','MM/DD/YYYY') + interval '1' DAY)

  GROUP BY ticket_id

  ) h

  WE (t.ticket_id = h.ticket_id)

  INNER JOIN n01.cc_ticket_notes n

  WE (n.created_date = h.closed_date)

  WHERE (t. ticket_status = 'NOTIFICATION' t.ticket_status 'CLOSED' = GOLD) AND t.created_date > = 18 August 2013 ' AND t.last_changed < to_date('08/24/2013','MM/DD/YYYY') + interval '1' DAY);

  ***********************************************************************************************************************************************************

  create or replace

  FUNCTION calc_time_diff)

  p_st_ts N01.cc_ticket_info. Type of LAST_CHANGED %,

  p_end_ts N01.cc_ticket_info. Type of LAST_CHANGED %)

  RETURN NUMBER

  AS

  v_no_sec NUMBER;

  v_st_ts N01.cc_ticket_info. Type of LAST_CHANGED %;

  v_end_ts N01.cc_ticket_info. Type of LAST_CHANGED %;

  BEGIN

  v_st_ts: = p_st_ts;

  v_end_ts: = p_end_ts;

  SELECT (extract (DAY OF v_end_ts-v_st_ts) * 24 * 60 * 60) +.

  (extract (HOUR FROM v_end_ts-v_st_ts) * 60 * 60) +.

  (excerpt (v_end_ts-v_st_ts MINUTE) * 60) +.

  excerpt ((SECOND from v_end_ts-v_st_ts)

  IN v_no_sec

  DOUBLE;

  Return v_no_sec;

  END calc_time_diff;

  Hello

  You don't need a function defined by the user or the EXTRACT to find the difference between two timestamps.

  SELECT COUNT (*) AS total_tickets

  , COUNTY ( BOX WHEN h.closed_date < t.created_date="" +="" interval="" '1'=""> )

                       THEN 1

  END

  ) AS less_than_1_hrs_count

  ...

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the results desired from these data.
  Point where the above query is to produce erroneous results, and explain, using specific examples, how you get the right results from data provided in these places.
  If you change the query at all, post your modified version.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002

• Help in the CASE statement with amount

  Hello Experts
  
  I amw Group on
  
  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  I'm unable to solve this Case statement.
  
  My requirement is that if the value of the attribute is greater than 50, then add 1 to the sum for attribute 4 the sum should be 4
  
  
  WITH T AS
  (
  Select MATH_CONV_SCR 70, 68 MATH_PERC, writ_conv_scr 66, 67 writ_per Union double all the
  Select MATH_CONV_SCR 70, MATH_PERC 48, writ_conv_scr 66, 67 writ_per Union double all the
  Select MATH_CONV_SCR 70, 68 MATH_PERC, writ_conv_scr 66, 67 double writ_per
  )
  (
  Select)
  CASE
  WHEN MATH_CONV_SCR > 50 THEN 1
  WHEN MATH_PERC > 50 THEN 1
  WHEN WRIT_CONV_SCR > 50 THEN 1
  WHEN WRIT_PER > 50 THEN 1
  TOTAL END)
  T
  )
  
  
  The expected answer is
  4
  3
  4
  for the respective folders
  
  
  Please give me the solution
  
  Thank you
  
  RB

  Hello

  Rb2000rb65 wrote:
  Hello Experts

  I amw Group on

  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production...

  Thanks for posting the version and sample data; It is very useful.

  ... Select)
  CASE
  WHEN MATH_CONV_SCR > 50 THEN 1
  WHEN MATH_PERC > 50 THEN 1
  WHEN WRIT_CONV_SCR > 50 THEN 1
  WHEN WRIT_PER > 50 THEN 1
  TOTAL END)
  T

  Don't forget that the WHEN of a CASE expression clauses are mutually exclusive. If none of them are evaluated to TRUE, then all of the following are not even tried.

  )

  The expected answer is
  4
  3
  4
  for the respective folders

  Please give me the solution

  Here's one way:

  SELECT  CASE WHEN math_conv_scr > 50 THEN 1 ELSE 0 END
        + CASE WHEN math_perc      > 50 THEN 1 ELSE 0 END
        +     CASE WHEN writ_conv_scr > 50 THEN 1 ELSE 0 END
        + CASE WHEN writ_per      > 50 THEN 1 ELSE 0 END     AS total
  FROM       t;