Problem with the event and the case of Structure

Hi all,

I get the problem in my program, I'm using the two structure one is the same and other structure box.

In the structure of the case, I had the button as an entry to the SPL and the case structure as the output of the structure of the case.

And in the same, then I had the two text box (num control A and B) in that I had put the event changes its value. Then, even I put the value has

num or num B control control control this corrosponding num value will save seeing num C. Now the problem is when I click on

the theLEB button does not blink until or if you don't put the value of one of the corrosponding num control.i didn't post my file in version 8.5 and 8.6 Please find tha.



It should work like that or I misunderstood what you want to do.

If Boolean is true, boolean 2 is true, at the same time, you can change the value of A so C or B then C.

See attachment

Tags: NI Software

Similar Questions

  • Dead pixel blackBerry Smartphones and the problem with the case of my BlackBerry 9780

    Hello world

    Recently, I bought a BlackBerry 9780 by Vodafone Spain (23 December) and I found a few problems.

    One of them is the presence of a dead pixel in the upper right and the feeling of the case a little weak in the left side that, when you touch it you can feel it creaks a bit.

    I would like to know if the warranty of BlackBerry or Vodafone Spain will cover this problem or if some of the new users of this model of BlackBerry noticied some of these problems and knows how to solve this problem.

    Sorry if they have problems with spelling. My usual language is Spanish .

    Thank you very much.

    A dead pixel is a hardware fault, and there is no miracle for her.

    Check if you can get a replacement.

  • Problem with the case where the clause


    I want to use cases in which clause. I wrote a very simple query to test how it works. However, I always got an error message. Here's what I did.

    Select eid, firstname, lastname from employee where eid = 1 works fine

    Select eid, name, name of the employee


    cases where 1 = 1 then eid = 1

    When 1! = 1 then eid = 2


    I ORA-00905: lack of keyword.

    Did I miss something?

    Thank you


    Hi, Jennifer.

    Why do you want to use BOX in a WHERE clause?  The wonderful thing about the CASE is that it allows you to do IF-THEN-ELSE logic.  In a SELECT clause, or an ORDER BY clause, this is really useful, but the WHERE clause already allows you to use the IF-THEN-ELSE logic.

    However, if you use the BOX in a WHERE clause, it is as it does nowhere else.  Always BARGAIN instead of a single expression in a SQL data types.  All the clauses THEN (and ELSE, if there is one) must return a single expression, such as the NUMBER.  (There is no BOOLEAN data type in SQL).  So, you can use a CASE statement like this:



    WHEN 1 = 1 THEN 1

    WHEN 1! = 1 THEN 2

    END = eid

    Here, the CASE expression takes the place of a NUMBER.

    However, if I was not sure if 1 = 1 or not, I would write the condition in this way, without a CASE expression:

    WHERE (1 = 1 AND eid = 1)

    OR (1! = 1 AND eid = 2).

  • Problem with the Db link

    Hi Experts,

    I am facing a problem with Dblink

    AMT OF remote Db
    X1 =
        (ADDRESS_LIST =
        (CONNECT_DATA = (SID = X1)))
    Local Db AMT
    X2 =
        (ADDRESS_LIST =
        (CONNECT_DATA =
          (SID = ELF)
          (GLOBAL_NAME =
    I am able to connect to X 1 with the id user USR & PWD password

    However, when I create db link
    create database link L1
    connect to USR
    identified by PWD
    using 'X1'
    It is created, however when I test, he says the invalid user id and password

    Please let me know what I am doing wrong

    Thanks in advance
    Kind regards

    Published by: 34MCA2K2 on July 11, 2012 08:37

    Published by: 34MCA2K2 on July 11, 2012 09:18

    Please refer to this

    Maybe a problem with the case-sensitive password

  • Problem with the change in value of listbox event


    I have a problem with the help of Listbox value change event. The code that I have attached is a simplified version of the largest program, but the problem is the same. One of the loops of Nonna is responsible for handlig occurring events ant the other is responsible for the execution of the program. In the project of oryginal I use a listbox control to determine which plots graphic display of a waveform is visible (first position of the listbox-> only plot first visible etc.). In the attached vi, I just show the current value of the listbox control. The problem is the event runs only once and then the program crashes. I want to be able to change the value of the listbox work both at idle and in State of a program, but when I put the structure of the event in both States, he does not. I'd be very grateful if someone smarter than me could tell me where I made my mistake. I want my program to be able to manage the keys and listbox events in States (slow down and knit) program.

    You have two structures of event in two cases different from the structure of the case, and both are tuned to listbox events has changed. Because only once can be triggered at any time, the VI crashes (lock events the front panel (default) until the event can complement).

    You must use a unique event structure managing all events.

    The overall program architecture looks like inside-out for me.

    For the buttosn, you must use action lock (switch not release!) and use the value changed events.

  • [HELP] Problem with the restoration and recovery in the new host

    Hi, guys!

    I have tried for two days, but still can't make it work.
    I took a hot (online) full backup archive as well as the control file logs with the SPFILE and then copy the backup to the new host with the same directory structure and parameters. Finally, I tried to restore and recover the database on the new host, but failed during the restore process.

    The original host and the new host have the same subject Oracle installed until the patch level. I couldn't understand the solution to this problem based on my knowledge on Oracle DB.

    Could someone help me out here? Any advice would be appreciated!

    RMAN > restore the database up to the wire of the sequence 10 1;

    From restoration to November 8, 11
    using channel ORA_DISK_1

    channel ORA_DISK_1: from datafile backupset restoration
    channel ORA_DISK_1: specifying datafile (s) to restore from backup set
    restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01. DBF
    restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01. DBF
    restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01. DBF
    restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01. DBF
    restoring datafile 00005 to D:\ORA_DATADATA01. DBF
    restoring datafile 00006 to D:\ORA_DATA\DATA02. DBF
    restoring datafile 00007 to D:\ORA_DATA\INDX01. DBF
    restoring datafile 00008 to D:\ORA_DATA\INDX02. DBF
    channel ORA_DISK_1: backup C:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading

    switch to the previous backup

    RMAN-00571: ===========================================================
    RMAN-00571: ===========================================================
    RMAN-03002: failure of the restore command at 11/08/2011 11:41:33
    RMAN-06026: some targets not found - abandonment of restoration
    RMAN-06023: no backup or copy of the file 4 found to restore
    RMAN-06023: no backup or copy of datafile 3 found to restore
    RMAN-06023: no backup or copy of datafile 2 found to restore
    RMAN-06023: no backup or copy of datafile 1 found to restore

    Here is some additional information you might want to know about:

    RMAN > list incarnation;

    List of Incarnations of the database
    DB key Inc key STATE ID DB name DB reset reset time SNA
    ------- ------- -------- ---------------- --- ---------- ----------
    1 1 PRODDB 3774691295 PARENT 1 17 APRIL 07
    2 2 3774691295 PRODDB PARENT 521803 6 OCTOBER 11
    3 3 3774691295 PRODDB PARENT 1595143 20 OCTOBER 11
    4 4 3774691295 PRODDB PARENT 1600974 20 OCTOBER 11
    5 5 3774691295 PRODDB PARENT 1952053 27 OCTOBER 11
    6 6 PRODDB 3774691295 CURRENT 2146951 7 NOVEMBER 11

    RMAN > backup recoverable list;

    List of backup sets

    Time of accomplishment BS key Type LV size device Type elapsed time
    ------- ---- -- ---------- ----------- ------------ ---------------
    37 full 822,34 M DISK 00:29:47 7 November 11
    BP key: 37 status: AVAILABLE Tablet: NO Tag: TAG20111107T175037
    2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_. BKP
    List of files to backup data value 37
    Name of file LV Type cash SNA cash time
    ---- -- ---- ---------- --------- ----
    2149673 full 1 7 November 11 D:\DBDATA\PRODDB\SYSTEM01. DBF
    2 full 2149673 D:\DBDATA\PRODDB\UNDOTBS01 7 November 11. DBF
    3 full 2149673 D:\DBDATA\PRODDB\SYSAUX01 7 November 11. DBF
    4 integer 2149673 D:\DBDATA\PRODDB\USERS01 7 November 11. DBF
    5 integer 2149673 D:\ORA_DATA\DATA01 7 November 11. DBF
    full 2149673 D:\ORA_DATA\DATA02 6 7 November 11. DBF
    7 full 2149673 D:\ORA_DATA\INDX01 7 November 11. DBF
    8 whole 2149673 D:\ORA_DATA\INDX02 7 November 11. DBF

    Time of accomplishment BS key Type LV size device Type elapsed time
    ------- ---- -- ---------- ----------- ------------ ---------------
    38 full 6.95 M DISK 00:00:03 7 November 11
    BP key: 38 status: AVAILABLE Tablet: NO Tag: TAG20111107T182034
    \2011_11_07\O1_MF_S_766606834_7CH8Q439_. BKP
    Control file included: cash SNA: 2151141 cash time: 7 November 11
    SPFILE included: Modification Date: 7 November 11

    Time of accomplishment time BS key size Device Type
    ------- ---------- ----------- ------------ ---------------
    18,46 39 M DISK 00:00:05 8 NOVEMBER 11
    BP key: 39 status: AVAILABLE Tablet: NO Tag: TAG20111108T093359
    2011_11_08\O1_MF_ANNNN_TAG20111108T093359_7CJY7TG1_. BKP

    List of newspapers archived on backup value 39
    The next time that THRD Seq YVERT low low time next YVERT
    ---- ------- ---------- --------- ---------- ---------
    1 1 2146951 7 NOVEMBER 11 2149493 NOVEMBER 7, 11
    1 2 2149493 7 NOVEMBER 11 2149519 NOVEMBER 7, 11
    1 3 2149519 7 NOVEMBER 11 2149565 NOVEMBER 7, 11
    1 4 2149565 7 NOVEMBER 11 2149641 NOVEMBER 7, 11
    1 5 2149641 7 NOVEMBER 11 2172859 NOVEMBER 7, 11
    1 6 2172859 7 NOVEMBER 11 2197851 NOVEMBER 7, 11
    1 7 2197851 7 NOVEMBER 11 2220349 NOVEMBER 8, 11
    1 8 2220349 8 NOVEMBER 11 2222621 NOVEMBER 8, 11
    1 9 2222621 8 NOVEMBER 11 2222729 NOVEMBER 8, 11
    1-10 2222729 8 NOVEMBER 11 2223088 NOVEMBER 8, 11

    Time of accomplishment BS key Type LV size device Type elapsed time
    ------- ---- -- ---------- ----------- ------------ ---------------
    40 full 6.95 M DISK 00:00:00 November 8, 11
    BP key: 40 status: AVAILABLE Tablet: NO Tag: TAG20111108T093411
    \2011_11_08\O1_MF_S_766661651_7CJY84LK_. BKP
    Control file included: cash SNA: 2223097 cash time: November 8, 11
    SPFILE included: Modification Date: 8 November 11

    Thanks in advance!


    In short, the RCS of the controlfile will be generally higher than corresponding SCN of the data in the event of hot backup (online) file; However, the two SNA will be the same in the case of cold (off-line) backup. Am I entitled?

    Yes, it's true. In a backup cold (assuming that the CLOSURE was not a SURRENDER but was NORMAL, TRANSACTIONAL, or IMMEDIATE) all files in the database (data files, redo log and controlfiles files) are 'compatible' - at the same point in time, to the same SCN. In a hot backup, the files are updated. RMAN is not necessarily take all the data files at the same time - for example when you have several data files, RMAN would backup the files in batches of 4 or 8 - data files are therefore controlled at different points in time. Similarly, the controlfile is saved last.

    Hemant K Collette

  • Problem with the loading of XML and xmlns

    I'm having a problem with loading an XML file that was created by Filemaker.  FileMaker will display an XML file by using one of two different grammars.  A poster of a standard form for the most that I can use with a glitch.  Flash CS4 AS3 seems to have a problem with the xmlns in one of the nodes.

    More precisely:

    " < FMPDSORESULT xmlns =" "> "

    ' If I remove the xmlns = " 'the file is loaded properly and I can access the different fields without problem.  However, when I go the xmlns =..., it will trace the XML properly but I can't access the fields by using the code below.  It drives me crazy!

    With part xmlns in the XML file, I get the following error when attempting to load the thumbnails files:

    TypeError: Error #1010: a term is undefined and has no properties.

    I need it so that the user can enter/change the data and simply output the XML file of Filemaker and then the Flash load the XML file not corrupted and displays the information requested by the user.  That is to say I might have the user open the XML file in a word processing application and have remove them the xmlns..., but it is rather heavy and not very user-friendly.

    I tried all the xml.ignore functions I could find, but it does not help.  I hope someone out there can help you

    Thank you



    Partial XML:

    XML to export Filemaker:

    <? XML version = "1.0" encoding = "UTF-8"? >
    <! - this grammar has been deprecated - use the FMPXMLRESULT instead.
    " < FMPDSORESULT xmlns =" "> "
    Sport.FP7 < DATABASE > < / DATA >
    < LAYOUT > < / PAGE layout >
    < LINE MODID = '1' RECORDID = "1" >
    Brand of < FirstName > < / name >
    Fowle < name > < / LastName >
    Veil of < sport > < / Sport >
    Medal of <>no < / medal >
    Design of < CourseOfStudy > < / CourseOfStudy >
    < year > 1976-1978 < / year >
    California < HomeState > < / HomeState >
    < ImageName > 93 < / ImageName >
    < / ROW >




    AS3 code:

    Import fl.containers.UILoader;
    var aPhoto: Array = new Array(ldPhoto_0,ldPhoto_1,ldPhoto_2,ldPhoto_3,ldPhoto_4,ldPhoto_5);
    var toSet:int = 10; time to time delay
    var toTime:int = place;
    var photoPerPage:int = 6;
    var fromPos:int = photoPerPage;
    var imgNum:Number;

    var subjectURL:URLRequest = new URLRequest ("testData_FM8.xml");
    var subjectURL:URLRequest = new URLRequest ("Sports.xml");
    var xmlLoader:URLLoader = new URLLoader (subjectURL);
    xmlLoader.addEventListener (Event.COMPLETE, xmlLoaded);
    var subjectXML:XML = new XML();
    subjectXML.ignoreWhitespace = true;
    subjectXML.ignoreComments = true;
    subjectXML.ignoreProcessingInstructions = true;

    function xmlLoaded(evt:Event):void {}
    subjectXML = XML (;

    If {(root.loaderInfo.bytesTotal is root.loaderInfo.bytesLoaded)
    removeEventListener (Event.ENTER_FRAME, xmlLoaded);
    trace ("data XML file loaded");
    trace (subjectXML);
    } else {}
    trace ("file not found");
    trace (subjectXML);
    loadThumb (0);
    function loadThumb(startPos:int):void {}
    var count:Number = aPhoto.length;
    trace (subjectXML.Database);
    for (var i = 0; i < count; i ++) {}
    try {}
    aPhoto[i].source="images/"+subjectXML.ROW[startPos+i]. ImageName + "_main.jpg";
    } catch (error) {}
    trace (e);
    aPhoto [i] .mouseChildren = false;
    aPhoto [i] .addEventListener (MouseEvent.MOUSE_DOWN, onThumbClick);
    trace ("current mem:" + System.totalMemory);
    ldAttract.visible = false;

    function unloadThumb (): void {}
    var count:Number = aPhoto.length;
    for (var i = 0; i < count; i ++) {}
    aPhoto [i] .unload ();
    aPhoto [i] .removeEventListener (MouseEvent.MOUSE_DOWN, onThumbClick);
    trace ("current mem:" + System.totalMemory);


    function onThumbClick(evt:MouseEvent) {}
    var i: Number;
    trace ("Thumbnail clicked" +;
    i = findPos (evt. Target.Name);
    ldLrgPhoto.source="images/"+subjectXML.ROW[i+fromPos]. LOCAL_OBJECT_ID + "_main.jpg";
    ldLrgPhoto.visible = true;
    btnPrev.visible = false;
    btnNext.visible = false;

    gotoAndStop ("showPhoto");
    function findPos(thumb:String):Number {}
    var pos:Number;
    var count:Number = aPhoto.length;
    for (var i: Number = 0; i < count; i ++) {}
    If (thumb == aPhoto [i] .name) {}
    POS = i;
    return pos;


    The ':' is what we call a scope resolution operator. Using namespace allows you to potentially have two or more nodes that have the same name but a namespace 'different '. "These are normally specified in xml in the form xmlns:mynamespace =""

    Normally, you would use the mynamespace:node by naming your xml nodes that are specific to this namespace.

    But the best is that namespace by default, when there is no real Prefixeespacenom: in the name of node as:

    That's how it is specified in your xml file, that is to say all the nodes without a prefix belong to the filemaker namespace.

    In actionscript, you navigate by using the scope-resolution operator and the variable that represents the namespace does not necessarily resemble the part "mynamespace" above. In your case the namespace used was the one by default (no), but a value has been assigned.

    To the question of the length, you must use the length() method, otherwise the e4x filtering seeks nodes named 'length' and creating a XMLList with no entry in there (because it's not). It is a common thing with other "Properties" that are expressed in the form of methods like children() and often take me when I started with the model XML as3.

  • Satellite Pro C650D - problems with the audio and game controllers


    I recently had problems with my microphone and speakers/headphones and game controllers.
    Sometimes the microphone stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

    Stakeholders sometimes still work when I connect headset.
    Some of the sounds are still coming through the speakers while some coming through the headphones.

    I have a usb game controller which also did not work everything properly.
    If I assign buttons in the program that they do not work in the game.

    All these devices are in Device Manager in a group that makes me think it's sort of annoying update doubtful that messes with them.

    Any body have similar problems or know what to do better?

    See you soon


    Can you please send some details on the laptop model and the system you are using?

    With regard to the issue of sound/mic:
    > The microphone sometimes stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

    Are you talking about internal microphone or external? This only happens using Skype?
    In your case I would test the microphone using different applications to make sure that is not a Skype related issue.

    > Yet sometimes the speakers work when I connect headset.
    I recommend this thread:

    The user has had a similar problem, but this phenomenon was linked to the Realtek HD Audio Manager settings.
    She wrote:
    + In the upper right corner, there is a small yellow folder called "Connector settings" in my version. +
    + There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged. +

    + So now when I plug an external speaker or headphones, it appears, and I select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.+

    Regarding the game controller:
    > I have a usb game controller which also did not work everything properly.
    > If I attribute buttons in the program, they do not work in the game.
    I put t think its problem of laptop in my opinion, you must make sure that the controller is compatible with the games you play and also recommended to check some info provided by the manufacturer of the game controller.

  • Could get a new router block printing? We had a lot of problems with the computer in the last week and a half. Bought new router and now the printer does not print. :-(

    (1) we went to DirecTV. Then the same day, our internet computer is down. I asked our current provider, Suddenlink, to let them know we had them to another - but we wanted to keep for the internet.

    (2) called DirecTV to investigate why our internet went down at the same time they installed? They said that they did nothing to cause that. We waited 5 days to make out and also install the third TV that was promised. The second tech gave things a lookover and said, once again, that there is nothing unusual during their passage to cause the problem.

    (3) called Suddenlink. They said it was the router. Called the people of Netgear. They said that the router was too old. We needed to pay an exorbitant sum for support and when I told him I'd rather just buy a new router and get free technical support for 90 days... and I personally do not have the credit cards in that time. (it's my mother s equip and I wonder it for the computer) when the guy told me that he could help and hung up on us, even though I was pleading for him to wait until I put my mother on the phone. (I'm in my 40s... not a kid).

    (4) Suddenlink called a few days later, when we got a new router (netgear brand NO!) Installed and I noticed that the 'ready' light was not 'on' on the modem. Their technology has said that he would check and call us in a few minutes. He did not.

    (5) the next day I called Suddenlink AGAIN. This time, I got a really nice customer service agent. She said she would send someone to check on it. It turns out that they had disconnected when I had called to pass only the TV.

    (6) in any case, we are finally online... only now... I can't the printer to work. :-(  This has worked before.  Could it be caused by the different router? I don't know about these things. I didn't even know what it was until someone at Radio Shack has explained to me. (I was not about to buy one at Wal-Mart - these poor people). The printer is a Canon Pixma MX340. We love him. The only thing is that it is difficult to clear the tasks or to reset. The only way to really do that is to simply pull the plug, unfortunately and restart the computer. But hey, it's a great printer, better than HP.

    We are under vista. The router is a Linksys wifi (which we have) N300 model E900.

    Of course I appreciate any help you can give. God bless you!

    Michelle and Ruth.


    Thanks for posting in the Microsoft Community.

    I understand that you are facing problems with the printer in Windows Vista.

    I imagine the inconvenience that you are experiencing. I will definitely help you with this.

    Please follow the steps in the link.

    Solve printer problems

  • After the last updates of windows have problems with start up and now drivers


    After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

    May 14, last night I had several (automatically) downloaded windows update

    Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

    Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

    Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

    Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

    Thank you

    Hi Jane,

    You have a disk to install Windows 7 with you?

    I suggest you to check the event viewer for error details report.

    Open event viewer.

  • Problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

    Am having problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

    * original title - I'm having a problem *.

    You have the latest drivers?

    Aero - Windows 7 - How to troubleshoot problems with Aero

    (1) first of all, click on the Start button and type in Aero. Now, click on find and fix problems with transparency and other Visual effects of link.

    (2) a new Wizard dialog box opens. Make sure that you click Advanced to solve all problems automatically.

    (3) either the problem will be solved or not. If this isn't the case, you will get a list of items that are potential problems.

    (4) If you want to see more details about the problem, you can click View detailed information. This will give you a list of potential problems that have been verified and those that pose problems.

    If it does not---> click Start---> right click computer---> click Properties

    Click the link for 'Windows performance index' and then click 'rerun the assessment"to refresh your WEI score and try again.

    Note: If you have Windows 7 Starter, or if your system does not meet the requirements for Aero you will not be able to use Aero.

  • I can't play DVDs in Windows Media Player 12 on Windows 7 Pro and get this error msg: Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection.

    Hello, thanks for reading and helping me.

    I try to play a legitimate, belonging to DVD, but Windows Media Player 12 will not play on my computer Windows 7 Professional.  The DVD worked a few days ago, but all of a sudden, I get the following error message:

    "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

    I did a lot of research of these forums and on the ' net.  Here are the suggested steps I tried without success:

    • I tried VLC player.  This works.  However, rather than use this workaround, I wish to find a solution to my problem WMP/WMC.
    • I tried several DVD for years over the last decade.  These DVD works on my laptop, also running Windows 7 Professional and the shark 007 codec.
    • I uninstalled my Shark 007 codec
    • I tried other codecs (K-Lite)
    • I assured that the latest drivers are installed on my video card, XFX ATI Radeon 5850
    • I tried to uninstall Nero 9
    • I tried to use the Windows 7 troubleshooting options:
    • > Reading and burning CD, DVD and Blu - ray (no problem)
    • > Windows Media Player DVD (no problem)
    • > Windows Media Player Settings (detects a problem, wants to restore factory settings, every time, no matter what happens)
    • A system restore to a time when the DVD was working did not resolve the issue
    • The different links in Microsoft, I found in this forum about this problem do not seem to be useful.  There is a link that points to the set-top boxes, but this page just says: "Windows 7 comes with a decoder.
    • I assured the latest driver is available by going to "Device Manager", right click on the drive, then click on "update driver software".
    • I assured that the latest firmware is installed directly from the manufacturer's website.
    • I tried to reset my DRM by renaming the DRM under C:\ProgramData\Microsoft\Windows folder and by going to this Web site to upgrade:
    • I've uninstalled and reinstalled Windows Media Player 12 and Windows Media Center via the function "functionality in Windows.

    I would be very grateful if a Microsoft technology could chime.  Thanks for your help!

    DVD drive: TSSTcorp CDDVDW SH-S203N ATA Device (Samsung)
    Driver: Microsoft 6.1.7600.16384, dated 06/21/2006
    Graphics card: XFX ATI Radeon 5850 Black
    Motherboard: Gigabyte GA-X58A-UD3R
    Processor: Intel i7-920

    -Intel i7-920, Corsair 6 GB of RAM, ATI Radeon HD 5850, Gigabyte GA-X58A-UD3R, Corsair 800 d case


    Try this free program:


  • Hello good I would like to cancel the annual plan of adobe audition, because I had problems with the software and the Bank, if I can help with this please.

    Hello good I would like to cancel the annual plan of adobe audition,

    As I have had problems with the software and the Bank, if I can help with that please.

    Please contact customer support for cancellation & refund of the next purchase. Contact the customer service

    Creative single-app cloud membership for Adobe Audition (one year) Subscription Office March 11, 2015

    In the case of any questions, please let us know, I can certainly go for you.



  • Hello I am a student and I have a problem with the tool Selection (V). When I opened the file AI CC with CS6 selection tool doesn't allow me to change the selection. What can I do? (I have reinstall AI CC and the problem persists)

    Hello I am a student and I have a problem with the tool Selection (V). When I opened the file AI CC with CS6 selection tool doesn't allow me to change the selection. What can I do? (I have reinstall AI CC and the problem persists)


    If it's on the rectangular objects, you may have encountered the bug Rectangle Live which is limited to the MAC versions from 10.7 and 10.8, but not of 10.9 (Mavericks) or 10.10 (Yosemite). If all goes well, the bug will be fixed soon.

    Thus, a switch for the Mavericks or Yosemite with a reinstall might be the way to solve it here and now.

    To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool or the free transform tool.

    A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:

  • Strange problem with the keyboard event listener

    I have a full screen touch app. To close the application, I set an event listener on keyboard for the key "0". I don't want the press user due to some restrictions Alt + F4 key combination. Problems begin when the application loses focus. Here's the code;

    protected function onComplete(event:FlexEvent):void

    this.setFocus ();
    this.addEventListener (KeyboardEvent.KEY_DOWN, trapKeys, true, 0, true);


    private void trapKeys(e:KeyboardEvent):void {}

    If (e.keyCode == 96) {}
    This.Close ();

    Else if (e.keyCode == 48) {}
    This.Close ();


    When the user change the screen to a different with Alt + TAB application, or any other combination of keys flex app loses focus and does not work when he turns back to my app "0". How can I solve this problem?

    Thanks in advance.

    Hi, Ahmed.

    I have absolutely no problem with the solution you are trying to set up - you use mode full-screen interactive mode of keyboard?

    Please consider:

    on full add keyboard listener

    protected function applicationCompleteHandler(event:FlexEvent):void


    this.stage.addEventListener (KeyboardEvent.KEY_DOWN, trapKeys);



    protected function applicationActivateHandler(event:AIREvent):void


    If (this.stage)


    switch the State to display full-screen when activated

    If (this.stage.displayState! = StageDisplayState.FULL_SCREEN_INTERACTIVE)


    this.stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;





    private var exitHandled:Boolean = false;

    on NUMBER_0 | NUMPAD_0 exit-close

    protected function trapKeys(event:KeyboardEvent):void


    If ((event.keyCode is Keyboard.NUMBER_0

    || event.keyCode is Keyboard.NUMPAD_0)

    (& this.exitHandled == false)


    exitHandled = true;

    this.stage.removeEventListener (KeyboardEvent.KEY_DOWN, trapKeys);

    This.Close ();



    (Note: applicaton of the events 'applicatonComplete' and "applicationActivate" are routed to over managers)

    Kind regards


  • Problems with the script to output event

    In fact I don't know if I have a problem with the Exit event or if there is something wrong with my script syntax... The output of a field event, I check if the field is empty or not and check a flag I put in place.

    The first if statement works - if I get back a value in the field, everything goes as planned. If I delete the value of the field, nothing happens.

    //if field has a value hide subSection04
    if (!(this.rawValue == null || this.rawValue.length == 0))
         subSections.subSection04.presence = "hidden";
    //if field is empty and flag equals true show subSection04
    else if ((this.rawValue == null || this.rawValue.length == 0) && (subFlags.Commercial.rawValue == true))
         subSections.subSection04.presence = "visible";
    //if field is empty and flag equals false hide subSection04
    else if ((this.rawValue == null || this.rawValue.length == 0) && (subFlags.Commercial.rawValue == false))
         subSections.subSection04.presence = "hidden";
    There are a few groups radio button that also control this behavior, they are all inter relate. So I tried also triggers the Click event of a radiobutton Group (which resembles the value in this field) out of this area, but that doesn't seem to work.

    Hi Jono,

    Your expression subFlags.Commercial.rawValue is true compares a String data type with a Boolean data type.

    Edit the expression as subFlags.Commercial.rawValue is 'true'

    I hope that this should work for you.

    Your code should look like

    //if field has a value hide subSection04
    if (!(this.rawValue == null || this.rawValue.length == 0))
         subSections.subSection04.presence = "hidden";
    //if field is empty and flag equals true show subSection04
    else if ((this.rawValue == null || this.rawValue.length == 0) && (subFlags.Commercial.rawValue == "true"))
         subSections.subSection04.presence = "visible";
    //if field is empty and flag equals false hide subSection04
    else if ((this.rawValue == null || this.rawValue.length == 0) && (subFlags.Commercial.rawValue == "false"))
         subSections.subSection04.presence = "hidden";


Maybe you are looking for