Excellent data to table

Similar Questions

• Help to import Excel data in tables preformattes

  This is my first post here, so please be gentle!

  I am a relatively new user of InDesign CS4, and I created the list price of the manufacturer 70 - pg.  A very large part of each page will be of size and price information source of a large Excel spreadsheet.

  I created the table format I would use for each page, but the problem comes when I import the Excel data in this table.  For some reason, when I import, all this turns in a cell.  It would be preferable to import into a table not formatted and then put in the form table every time, or is there a way to simply import data into my preformatted table?  I've seen how the former, but the latter seems much easier (.. .Although that could be my inexperience talking).

  Any advice would be greatly appreciated!

  Thank you very much

  Laura (V1500)

  To paste a range of cells in the way you want, you have most of the steps down.

  The key point is to select the CELL at the top left of the area you want to paste into. See the screenshot below. The first cell in the range of rates is selected.

  You may simply move the active cursor in the cell. This puts the contents of the Clipboard into this one cell.

  

• How to save the data in table 1 d to Excel in continuous

  Mr President.

  How to save the data in table 1 d to Excel at all times, so that all the data of the first scan must be placed first thought and all the data from the second analysis must be placed on the second Board and continue on the street...

  Sy@m...

  Hi Sy@m

  Here is a vi that might give you a few ideas to try:

• How to import a table of excel data in my site with DW CC?

  Hello!

  Im trying to insert a table of Excel data in my site, but when I do, the information are delivered with a large number of dirty codes making my Dreamweaver CC accident...

  I'm using File - Import - tabular data.

  Thank you

  Maria

  If you get a lot of formatting and garbage of Excel who causes an accident, you can first save your file as a delimited file and which allows to import into Dreamweaver using the same steps as import it tabular data.  These files are much cleaner and easier to import.

• Load since excellent data to Oracle Tables

  Hi all
  
  I want to create a table with the payment year as default sysdate (to_char(sysdate,'yyyy')) and months in the form 'MM' (as default payment_month < (syadate, 'MM') >
  
  I'm doing it in vain. Help me please, and the other is want to load data from EXCEL to ORACLE table.
  
  I used to load the load data using SQL * LOADER. can you please let me know is possible to load data without using SQL * Loader? Please give me the solution for this.
  
  Thank you
  ORA.
  

• Import excel data in oracle tables

  Hello gurus,
  Importing excel data in oracle tables...
  
  I know it's the most common question on the wire... First, I searched the forum, I found lots of threads with loading data using sqlloader, excellent in conversion. Txt, file delimited by tabs, file .csv etc...
  
  Finally, I was totally confused in terms of how to get there...
  
  Here's wat I
  

     - Excel file on local computer.
     - i have laod data into dev environment tables(So no risk involved, but want to try something simple)
     - Oracle version 11.1.0.7
     - Sqlplus and toad (editors)
     
   

  Here's wat I want to do... .i don't know if its possible

      - Without going to unix server can i do everthing on local system by making use of oracle db and sqlplus or toad
     

  SQLLOADER could be an option... but I don't want to go the unix server to place files and newspapers and stuff.
  
  Wat will be the best option and the easiest to do? and wat format better convert excel csv or txt or tab delimited etc...
  
  
  If you suggest sqlloader, any example of code will be greatly appreciated.
  
  
  Thank you very much!!!

  Hello

  Toad version 9.0.0.160, you can directly load data excel file (or any other specified) to table using the navigation "database > import > import the data in the table.
  You need to connect to the database, then go to the above navigation. Select the table, validation interval (i.e. commit after each record or once all records), map columns in excel file to your table and press ok.
  It loads data directly to your table.

  But, if you use characters multibyte (such as Chinese) in excel file you want to load, then you must make some settings in your machine.

  Don't know if its possible in another version of Toad.

  Concerning
  Imran

• Writing to Excel with ActiveX table

  Frequently asked question, I suppose, but I still have questions despite reading several posts on the issue.

  Problem is that I'm writing a 1 d of data table column 1 in an excel document. However, unless I have add a column artificial (empty values or some other # false), ActiveX written only the 1st value to my table in the column.

  Look at the joint. In photo 1 I add a column articial and all written very well. In photo 2, I do not add this column and that the 1st value in the table is written in each line.

  Suggestions?

  Thank you.

  I did a lot with Excel and LabVIEW by ActiveX.  Creating a small VI and reproduce what you show in your screenshot, I see the same behavior.

  I think that Excel interprets a table 1 d as something that works horizontally.  If a table 1 d consisting of a single row of cells and N the number of columns.

  (Actually LabVIEW interprets a table 1 d like that as well, but it allows you to display a picture on the screen vertically or horizontally).

  Conversion of a 2D array and transposing are what you need to do to get this table 1 d to be treated as a single column of cells.

  Note that you must use build table and add an empty array to it.  You can use build table as it is and it will turn a 1 d table in a 2D array.

  

• How to view graphical waveform Excel data

  I have a file .csv with 4 data column.  I found something for another thread that allows me to display data from an Excel file in a table.  I have a problem with the following:

  (1) I need to display column data 4 but I can't seem to find a way to add other elements to the Invoke node so I'm stuck with power display only 2 columns of data.

  (2) why can't take my output and put it in a table, and then view it on a waveform graph?

  Please take a look at the attached VI.  I took notes in the block diagram.  When I try to join the Excel data to a chart, it indicates that the source type is a string, while the sink type is double.  How can this be when the Excel file has only whole?

  Help, please.

  Thank you.

  
  

• Import Excel data into Form Designer

  I developed a dynamic form in Livecycle designer that will be sent to hundreds of schools throughout Nebraska.  There is a table in this form that has buttons to add or remove a line while dependent students informtion can be entered in this table. How I shape now works perfect for most schools, however; with the largest schools that will enter in over 200 different lines of information, it will be a long unessarily task.  Most of these schools already have the information that we solicit in an Excel file.  Is it possible for an end user of this form, using the adobe reader software to import excel data into the table?

  -Susann Wenzel

  It is possible, but you will find may be more difficult than what it's worth.

  1. you must manipulate the worksheet to make it look like a DB

  2. you must set up an ODBC connection on the system running the form and the worksheet...

  3. you would have to change to point to the worksheet from the definition

  4. you wish Reader the form using LiveCYcle Reader Extensions to allow the ODBC connection occurs in the drive.

  Paul

• How to transfer data from the data in table 2D only once file?

  Attached file will write same data in table 4 times 2D file. Output must be in a table 2D.

  Someone will provide a solution or a reason to explain why the data are been ouputted 3 more times? Thank you

  I already told you a better and more effective method. The function of reading worksheet is on the exact same range as your text file and does everything for you. If you insist for some reason strange kernel to reinvent the wheel and write your own code, take the correct path. The use of 4 separate spreadsheet String to Array is the cause of your problem and I already said too much. Don't you think that get you 4 times the data is in correlation with the fact you are using 4 times the functions necessary at all? It is simply not true. Look at the diagram-writing block on a spreadsheet file.

• error when pass array 1 d by data in table pointer via Labview-built c++ dll

  I'm trying to generate a Labview VI to a DLL and let it be invoked by vc ++, by which a 1 d array is passed. However, I can't generate the DLL when you use the data pointer to the table, which gives the error like below:

  [ERROR]
  Code :-2147221480
  Strengthening of the DLL.
  Error when compiling the DLL as a function name or a parameter is illegal. Check function and parameter names are legal C identifiers and are not inconsistent with the LabVIEW headers.
  Additional information: 9 project link errors
  Type Library generate error. MIDL.exe failed during the compilation of the odl file used to create the type library.
  Note: The error indicates that the odl file has unknown types. This error is possible when
  works with non-standard types is exported using the method qualifier exporting files in
  release the configuration that have not been recompiled during the build process.

  The Prototype of VI define is as below

  

  But, if I use the pointer to manage through the table, the generation is successful, error-free. I write something to call the DLL built labview, which basically reads 1000 double the data of an instrument.

  #include "TestDQMaxDLL.h"
  #include 
  
  using namespace std;
  
  int main(int argc, char** argv) {
      cout << "Start testing DQMax DLL" << endl;
  
      int leng{ 1000 };
      DoubleArray rawDPData = AllocateDoubleArray(leng);
      test_dqmax_dll(&rawDPData);
      cout << "Successfully invoked the DLL!" << endl;
      cout << "DoubleArray.len: " << (*rawDPData)->dimSize << endl;
      for (int i = 0; i < leng; i++)
      {
          cout << (*(rawDPData + i))->elt[0] << "\t";
          if (0 == i % 10)
          cout << endl;
      }
  
      system("pause");
  
      DeAllocateDoubleArray(&rawDPData);
  }
  

  But the printed results are not correct.

  My questions are:

  1. why cannot generate DLLS with the data of table pointer. In this case, the argument of the function is as simple as a double array.

  2. for table handle pointer, when the resutls are incorrect and how to get the good ones.

  Any comments would be appreciated.

  BTW: I use Labview 2012 with Visual c ++ 2013 on Windows7 64 bit.

  I never needed to pass a table of LabVIEW handle external code. Search this forum for posts of RolfK, it is most likely to have posted such an example. I recommend that you keep things simple and remodelling your table a table 1 d 2D before moving on to external code and manage as a 1 d table (it's just a little extra math).

  Sorry I don't have a solution on why you can't build with a 1 d as a pointer of table table. If you post your project I'm happy to try to build (I'm on LabVIEW 2012, however), but as you said, it will rely on another machine, it seems more likely to be a problem with something on the specific computer where there is a problem.

• Graph of the Excel data with overlay of dynamic data acquisition

  Hi all

  I was next to the forum of Labview for about a year, it's the same with my programming so I'm a little rusty. I don't have someone code this for me, but just a quick plan high level to point me in the right direction.  I am able to work through the tutorials Excel etc.

  Task 1: Basically, I have a set of data Excel (2 to 6 columns of figures, not the time) I want to read in Labview and throw in a XY graph as the base model that remains visible all the time.  This data set is quite long, length vs. size (length is 100km, 1 m intervals). I essentially want a scroll X graph to display all of the data.

  Task 2: Acquire a direct serial data string which will be superimposed on the graph of task 1 model. Acquired essentially data comparing data in real time to previously.

  In the past, I made the simple projects with Excel data reading and also the reading of data in series.  What I'm not clear on is how to create the (static) graph with Excel data model while superimposing live data as it comes.  It is the basis of an annual check of the investigation process.

  Advice on the process would be appreciated so I'll be working through the nuts and bolts.

  Cheers for any help,
  Wes

  If you are worried that your data sets is too large, then run a test with simulated data to see how LV takes it. You might be surprised. In all cases, you should be aware that the chart control will need to redraw it with any changes you do anyway, and as far as I know, having a large amount of data is the main thing that can make a slow chart control. If you find that you have too much data, you might need to decimate it you based on how much you zoom before putting it in the graph.

• Data of runtime of overlay on top of excellent data

  Hi all

  I have data from Excel I want to plot them on a graph in LabView, while the data collection program, I would like to overlay the current data on the Excel data as a Visual top to ensure that the test runs well.

  Does anyone know where is an example of one such vi maybe?  Maybe you can give me some advice on how to do this?

  Thanks for any help,

  Matt

  Hello

  If I did not have a maximum number of iterations, I would use a while loop instead. Otherwise, if there is a maximum number of iterations, a stop point can be added to a loop on the right by clicking on the edge of the loop and the conditional terminal option selection.

  -Zach

• Help me script to put eps and excel data in page-by-page indesign files.

  Hello

  I have many files eps by S1, S2, S3, S4... sequence. and as much of are available in excel file data.

  Script required:

  (1) S1 eps placed in page 1 and S2 eps on page 2... in indesign.

  (2) data from cells A1 Excel must place in the lower left corner of Page 1. and given cel A2 should place page 2 same place... in InDesign.

  Please provide the script for the same action in number of eps files and excel data.

  Thank you and best regards,

  Sampath.S

  try to rename with the addition of zero... for example

  1---> 001

  2---> 002

  11--> 011

• Get the data in table of javafx

  Bat I can get the data in table as:

  [code]

  for (int i = 0; i < dtm.getRowCount (); i ++)

  {

  for (int j = 0; j < dtm.getColumnCount (); j ++)

  dtm.getValueAt (i, j);

  [/ code]

  But how can I do this with javafx table? I google and google and google and no luck.

  In JavaFX make data are stored on a basis per line. Each line contains an element of type T (where you have a TableView), and each column specifies a value using a callback function that determines the value of the column of the value of a particular line.

  You can browse the data simply by practice

  for (T item : table.getItems()) {
    // ...
  }
  

  And then get the value of each column for each element of the given line, since you "know" what each column represents.

  For example, in the example of JavaFX documentation, you could do:

  for (Person person : table.getItems()) {
    String firstName = person.getFirstName(); // value in firstName column
    String lastName = person.getLastName(); // value in lastName column
    String email = person.getEmail(); // value in email column
  }
  

  If you want something really generic, you can try

  for (T item : table.getItems()) {
    for (TableColumn col : table.getColumns()) {
      Callback, ObservableValue> cellValueFactory = col.getCellValueFactory();
      CellDataFeatures cdf = new CellDataFeatures(table, col, item);
      Object cellValue = cellValueFactory.call(cdf).get();
      // do something with cellValue...
    }
  }
  

  If you have little chance to this need, unless you write some kind of framework. (I just typed it here, you may have get dirty you with guys a little to make things).