Writing to Excel with ActiveX table

Similar Questions

• Help to quit Excel with activex (Save dialog box)

  Hello.

  I have following question.

  I have a VI that writes the data of measuring devices in an excel file. Later, I want to change the order of the entries using activex.

  Everything works fine, but when I leave the save-dialolg excel still appears. I searched this forum for possible solutions and experimenting a bit but I still have a box at the end.

  Well, now, at least, it is only those one and not several. The loop in my implementation for data manipulation could be the cause, but if she is, I don't know why or how to solve it. But maybe it's something different. Anyway, I can't find the reason.

  Some help would be really appreciated.

  Thank you much in advance.

  Concerning

  CD

  
  

• problem with writing a procedure with the name of the table as an input parameter

  Hi all
  
  I am writing a procedure with the table name as input parameter:
  Here is the code
  
  create or replace procedure CEP (in_tbl in varchar2)
  as
  Start
  
  run immediately 'truncate table tlb;
  
  Insert into tbl
  
  Select a, b, c of in_tbl;
  
  end;

  user579585 wrote:
  Hi all

  I am writing a procedure with the table name as input parameter:
  Here is the code

  create or replace procedure CEP (in_tbl in varchar2)
  as
  Start

  run immediately 'truncate table tlb;

  Insert into tbl

  Select a, b, c of in_tbl;

  end;

  You will also need to use dynamic sql for insert statements:

  execute immediate 'begin insert into tbl select a,b,c from '||in_tbl||'; end';
  

• LabVIEW Code for SearchOrder when it interacts with Excel through ActiveX

  Hi all

  Thanks to this excellent with the answers of Joe_H thread, I could write code that searches for a string in an Excel file and returns the address of the cell with the connectivity of the ActiveX.

  What I want to do now is to refine the search parameters to search by column.  I think I could do this by plugging a value 'SearchOrder' of entry, as shown in the attached chart.

  However, I was not able to create a control that works.  I try over the chain, "xlByColumns" (which is what I think should work) in the field, and it causes an error.

  Has anyone found how to accomplish what I'm doing?

  Thank you

  FB

  

  This parameter is an integer, and you need to set it to 2.

  The easiest way to get the whole if you know the string is:

  Opening Excel

  Open Visual Basic (I put this icon in my quick access toolbar)

  View-> run window

  Type '? xlByColumns.

  the answer will be 2

• Writing Excel using activeX - missing data after column IV

  Data size is about 400 (col) x 100 (row), save in excel using ActiveX, it cuts the data only with 256 columns, other IW data... are missed.

  

  How to solve this problem in LabVIEW? I save the file in .xlsx format.

  

  Pls ignore this question because I already solved the problem, thanks to you all!

• Need help writing an update / insert with linked tables

  I am new to ColdFusion. I am learning to write querys and creates a small application to collect information from visitors to my web site. (It's also a good way for me to learn this language) I'm having a problem and it is not only the way to use an update / insert with related tables. I don't know if I'm still gather the appropriate variables to compare them to existing DB records until his execution is the update or insert some querys. Can someone help me, show me how can I update / insert related tables and maybe tell me if I create the varibales good to the compairison? This is my code, I commented out.

  <! - creating a variable to compare with the db table - >
  < cfset userIP = ('#CGI.) REMOTE_ADDR #') >

  <! - run the query and compare the cfset cell remote_addr - >
  < name cfquery = 'userTracking' datasource = "" #APPLICATION.dataSource # "dbtype ="ODBC">"
  SELECT REMOTE_ADDR
  Of user_track
  WHERE REMOTE_ADDR = #userIP #.
  < / cfquery >

  <!-if the record exists, then run this update-->
  < cfif userTracking EQ userIP >
  < cfquery datasource = "#APPLICATION.dataSource #" >
  UPDATED user_track, trackDetail
  SET user_track. REMOTE_ADDR = < cfqueryparam value = '#Trim (CGI.' ' REMOTE_ADDR) # "cfsqltype ="CF_SQL_VARCHAR">.
  user_track. Browser = < cfqueryparam value = '#Trim (CGI.' "HTTP_USER_AGENT) #" cfsqltype = "CF_SQL_VARCHAR" >.
  user_track.visits = visits + 1,
  trackDetail.date = < cfqueryparam value = "#Now ()" # "cfsqltype ="CF_SQL_TIMESTAMP">,"
  trackDetail.path = < cfqueryparam value = "#Trim (PATH_INFO)" # "cfsqltype ="CF_SQL_LONGVARCHAR">"
  WHERE REMOTE_ADDR = < cfqueryparam value = '#Trim (CGI.' ' REMOTE_ADDR) # "cfsqltype ="CF_SQL_VARCHAR">
  < / cfquery >
  < cfelse >

  <! - if it isn't, then insert a new record-->
  < datasource = "" #APPLICATION.dataSource # cfquery "dbtype ="ODBC">"
  INSERT INTO user_track, trackDetail
  (user_track. REMOTE_ADDR, user_track.browser, user_track.visits, trackDetail.userID, trackDetail.date, trackDetail.path)
  VALUES)
  < cfqueryparam value = '#Trim (CGI.' ' REMOTE_ADDR) # "cfsqltype ="CF_SQL_VARCHAR">.
  < Len (Trim (HTTP_USER_AGENT)) GT 1 cfif >
  < cfqueryparam value = '#Trim (CGI.' "HTTP_USER_AGENT) #" cfsqltype = "CF_SQL_VARCHAR" >.
  < / cfif >
  visits + 1,
  < cfqueryparam value = '#Trim (CGI.' "HTTP_USER_AGENT) #" cfsqltype = "CF_SQL_VARCHAR" >.
  < cfqueryparam value = "" #user_track.userID # "cfsqltype ="CF_SQL_VARCHAR">,"
  < cfqueryparam value = "#Now ()" # "cfsqltype ="CF_SQL_TIMESTAMP">,"
  < cfqueryparam value = "#Trim (PATH_INFO)" # "cfsqltype ="CF_SQL_LONGVARCHAR">"
  )
  < / cfquery >
  < / cfif >

  
  I'm close on this? This throws any errors, but it is not no longer works. It is so obviously wrong. I get a cfdump the end of my query of compairison, but once it hits the stated case, it is lost.
  
  Thanks for your time no matter who.

  Newbie

  You must define the variable before you can use it.  You try to use it on line 1 of your model.

• When I print a table (multiple pages) the text box under the table seems to be moving under the table and prints with the table of this overlap. My only solution is to push the text box further down the page before printing... Any advice?

  Im having problems shaped a text box so that my table does not print right on top of it. I want it inside of my table (it's 'tems and conditions' budget)

  Any advice would be great.

  I face the same problem as well. Would like to know if there is a better way to get the text box to move with the table instead of the effect that overlap. Have to manually adjust the layout, whenever I want to get a reasonable print of a document (or export it to PDF) seems counterintuitive, especially when it causes the document seem ill-disposed on screen.

  I am running version 3.6.2 of the numbers in the case where that matters.

• How do VI with timestamp table entry

  I'm doing a sub - VI for a program and I need to have a double array, boolean and an array of time as an entry stamp. I can't find a way to mark the entrance with a table timestamp however indicator. My only choice seems to be double and Sub. Is it possible that I can do this?

  You have a block of empty array on your front panel and then move there a timestamp control.

• Time dilation of a curve with interpolation table 1 d?

  Greetings,

  I'm trying to run a time dilation of a curve I used to work with the table 1 d of function interpolate VI. Basically, I have to perform the expansion on each segment, that is why each segment contains 100 points, where there are currently 60.

  I am currently working with two files (the two are broken) to compare because I'm not sure how to use the table 1 d interpolating VI, and what I have to enter for the fractional index. I know that the output of the table in the first for loop should go in the 1 d array interpolated somehow.

  I'm stuck!

  Thank you!

  TheLT

  I'm good I thought it

  Here's how to do it for later use.

  Code attached.

  TheLT

• CVI suggested help update on 'programming with the Table controls.

  Hello

  May I suggest adding a sentence to the chapter 'Programming with the Table controls', 'Creation and deletion of cells' section help of CVI.

  After the sentence "use the following functions to control the number of rows in a table control...". "I would like to add a suspicion that the number of lines is also affected by (programmatically) adjustment of the height of the table.

  Now that I've discovered, it's obvious ;-)

  Hi Wolfgang,.

  I think you might be misunderstanding this sentence in aid. It does not refer to the size of the table, in regard to the number of lines go in the table. It is in fact the number of real lines exist in the table. And the total number of rows in the table is absolutely not affected by the height of the table.

  Luis

• How can I do a summation of a table summarizing several points once, leaving me with another table?

  Hello, I tried to find a way to do the summation of a table, the sum of 19 points at a time, leaving me with another table.  I feel like this has a simple solution, but I'm not sure how.

  Thank you.

  A time loop that contains the subset of the table can do.

  Lynn

  

• How can I send façade to Excel with extension xlsx?

  Hello

  How can I send façade to Excel with extension xlsx (for Excel 2007)?

  This is my file as an attachment"and the extension of excel sheet is" C:\Documents and Settings\tr1388\My Documents\New Folder\Book1.xlsx ".

  Hey King Rio,.

  See below for an example of how you might go about inserting a picture of your façade in an Excel document. You can do a little more of your image formatting, as this example simply updates the image of the façade in the upper left corner of the first workbook in your Excel document.

  

• Call and open an external Excel with exec system vi

  Hello!

  I would like to know how I could call and open an external Excel with the exec system vi. I am able to call a txt file, but I can't do it with an excel file...

  Thank you very much in advance.

  It should work like any other file, it opens in the default program for the file extension that if you double click on it.  Here is an example if code that I use.

  

• Is it possible to update a chart "XY" whenever a point is generated as with a "table"?

  Is it possible to update a chart "XY" whenever a point is generated as with a "table"?

  In the attachment, the XY graph, 'OUT' is updated once the loop is completed. I would like to be updated as data is generated inside the loop. Is this possible?

  Thank you.

  To make it work, you need to do the full table available inside the loop.  This means that you cannot use a tunnel of indexing at the exit to build the array. Instead, you must use a shift register and build the table inside the loop.

  This will do what you want.  It would have been easier to show you if you had posted your code.

• Partiton Exchange with a table of partitoned

  Hi all

  Basically, I want to exchange a partition with a partition to another table. < < Not with data from the source, only the subset of data from the source table > >

  I am not able to do this, because the swap partition syntax allows only to exchange the partition with an entire table... According to below syntax

  Target WITH the source TABLE of the EXCHANGE PARTITION
  
  

  Is it possible I can do Exchange partition with a partition specific to this table in the source as below

  SWAP PARTITION WITH source TABLE p1_target_jan_2013 where month = "Jan 2013"

  OR

  SWAP p1_target_jan_2013 WITH TABLE source partition p1_jan_2013 PARTITION

  We want to move existing data from a tab1 in the table (Source) that is already partitioned on the date column for each month.

  Data in the source given cans to zero for each month.

  that is when ever some Calc is run again for a given month (e.g. Jan 2013), existing data related to "Jan 2013" is given first and then deleted again inserted for this month ' Jan "»
  2013 so to keep a history of all data, we want to keep moving data to the data in the history before deleting.

  As huge data are involved, can use PARTITION EXCHNAGE, but also located above, as I want to exchange the partition with the subset of rows of a table source'm not able to do this.

  Can someone help me please...

  Kind regards...

  I suppose that there are two partitioned tables (the letters represent the content, not the name of the partition):

  • PARTITIONED_TABLE_SOURCE (A, B, C)
  • PARTITIONED_TABLE_TARGET (D, E, F)

  If I want to get the data from the partition A to replace the data in the partition D, I'd be:

  • Exchange A Partition with a self-help support table H (defined with the same columns, index a etc)
  • now, my PARTITIONED_TABLE_SOURCE contains partitions (H, B, C) and A is a stand-alone table (of course I mean the data and not the partition since H names will be named A after the Exchange)
  • Swap Partition D with the self-help support table has (once again a stands for the content and not the name of the object): so now PARTITIONED_TABLE_TARGET contains (A, E, F)

  Maybe it would be more concese with a code example...