Except me, WHO can see {[link to] my Revel Albums/Photos/videos?}

Similar Questions

• How to get more cards in Freecell for aunt of mu who can see hardy?

  Once there was in an earlier version of Freecell the possibility to enlarge the maps even up to the sides of the screen. For the aunt of mu, who can see hardy what is happening on the screen, I like to create such a possibility. I already changed the lower resolution (800 x 600). Thank you.

  Thanks again.
  The real solution is to be found here:
  http://www.solitairelaboratory.com/fcpro.html

  After watching the game for the first time, you need to change the card measures.
  Greetings.

• User who can see different patterns

  Dear gurus,
  In my PB I have 2 schemas with 2 user different each... so:
  A schema with the user A_user
  Diagram B with the user B_user
  
  Now, I created a new user schema.
  Scheme C with the user C_user
  
  I need allow C_User to see diagram A and B pattern read-only.
  How can I do?
  Please let me know
  concerning

  Create the code to generate stock MARKET operations, for example:

  BEGIN
       FOR r IN (SELECT OWNER, TABLE_NAME FROM ALL_TABLES)
       LOOP
            EXECUTE IMMEDIATE 'GRANT SELECT ON ' || r.OWNER || '.' || r.TABLE_NAME || ' TO SOME_USER';
       END LOOP;
  END;
  /
  

• Can non-Apple users really share a Photo album - for example, adding images to it - or can they simply view a web link that I send them?

  I have iCloud Photos active and fully work / sync on my Mac, iPhone and same iCloud on a PC.  I created a folder shared and sent invites to 2 PC users only. They never receive the prompt (re-sent several times) or get a message not available on your system if they try and accept the invitation.  Sending them the web link that the window share me offer allows them to see the images in the folder via a browser - but they cannot comment on or add new images.

  So, is full of sharing limited to the Apple world, or am I missing something?

  Hi cclift1,

  Welcome to the communities of Apple Support! I apologize for any confusion over the shared Albums. Although any user can view an album shared via the web link, you reason that to work with this album (photos/video post, comment, etc.) they would need to be on an Apple device or have iCloud installed on their Windows, such machine as mentioned in this article:

  What do I need see and share videos, contribute to someone of another shared album, and add comments or like photos and videos?

  • iPhone, iPad or iPod touch with iOS 7 or later
  • Mac OS X Mavericks v10.9 or later and iPhoto 9.5 or opening 3.5
  • Apple TV (2nd generation) with software from the Apple TV version 6.0 or later
  • PC with Windows 7 or later and iCloud for Windows (or iCloud Control Panel 3.1 or later version)

  If the owner of a shared album activates the Public website option and share the link with you, you can use any browser to update to see photos and videos added by the owner and all contributors.

  Get help using iCloud, sharing photos and shared albums - Apple Support

  Concerning

• How can I change the face highlighted in Photos?

  In Photos, while approving the selected, Faces face highlight is often the incorrect person because my children are similar. If I click on the photo, it rejects it. I don't want to dismiss it because the person I'm appointing IS pictured. The circle is just on the wrong person. Is it possible to move the circle to highlight the right person?

  The circle is just on the wrong person. Is it possible to move the circle to highlight the right person?

  You cannot move the circles who found the Photos. Reject as the proposed person and wait for the other shown later, you will enter the faces without a name.

  If you enable the option "Show names faces" in the view menu, you can see all faces circles for a photo at the same time, when you enlarge a photo.

  You can then enter all names directly in the textfields on the wall.

  I prefer name faces by opening a moment and step by step of the photo for the photo.  The way I see the pictures in context, know all the faces which were found and can add circles of faces missing from the information panel.

  

• How can I get the pxr from album to be included in the download of MP3

  I need help with this. When someone dowloads a music mp3 download, how can I also included album image so they can see the image of the album when they play the MP3 ipod, windows media, etc. I'd appreciate any help that anyone can give me on this. Thank you.

  A good question.  Unfortunately hearing does not album art to be inserted into an mp3 file. (I hope that the next version!)

  I use a free program called Stamp ID3 tag editor of NCH software http://www.nch.com.au/tageditor/index.html but there are many others.

  My approach for a podcast mix to the bottom of my Audition project to a file master uncompressed wav.  I then create an MP3 of this hearing.

  After having closed the hearing, I open the mp3 with ID3 Stamp and enter the tag information and import a jpg for the album cover image.  Stamp ID3 and then saves this information in the mp3 file.

  I know that others use itunes to insert the work into the mp3, but this requires you to import the mp3 in Itunes first.

  Hope that helps

  Ian

• can we all see a pdf file that has been made public in order to send, or just the person who got the link in an e-mail?

  I had to send a pdf of my bank statement to my tax guy but I was away from my computer and I have a windows phone and was able to go on the website of the Bank and use adobe acrobat to send it, but to send acrobat made me choose "make public" therefore my notice able to everyone or just who ever clicks on the link in the email I sent? the only one I have the email was my tax guy so he is the only person that can see right?

  It would take the link to access your file, and Adobe only makes the public link. At this point, it sounds like if only you and your tax guy have the link.

  Note that if you are worried, you can turn off sharing on this file once your tax guy downloads.

  Hope that answers your question.

• YouCam video will play not only audio. Used apps page link. Can see screen capture.

  Hello

  We recorded a minute using Cyberlink Youcam video (the one on the 8.1 page apps, distinct from that with a shortcut on the main page of office - Youcam5.) We can see screenshot you of the video and the sound for the duration of the recording, but the screen is only green. Help please!

  Amber

  Hi @amberdag,

  Welcome to the HP Forums!

  I would like to take a moment and thank you for using the forum, it's a great place to find answers. You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that when you tried your YouCam 5 record playback, you can hear the sound, but the screen stays green.

  You did all your Windows updates?

  You either Direct X, Adobe flash player and direct X to date?

  Here is a link to How to fix green screen in YouTube video playback to the point 8.1 of Windows (from social.technet.microsoft.com) which should help you overcome this problem.

  Here is a YouTube video that can also help with this difficulty.

  Reading YouTube Green FIX screen problem

  Please let me know the results.

• I try to install Lightroom 4 on a new machine, but the media are hosted by Adobe.  I can see my license number but do not see the option for download.  Y at - it a link to the downloads for this media on the Web site?  It does not appear in my one Adobe

  I try to install Lightroom 4 on a new machine, but the media are hosted by Adobe.  I can see my license number but do not see the option for download.  Y at - it a link to the downloads for this media on the Web site?  It does not appear in my Adobe account.

  Adobe - Lightroom: For Windows

  Adobe - Lightroom: For Macintosh

  Mylenium

• WHY don't images suddenly appear or show in my gmail messages using Firefox 12.0 AND 13.0 but I can see the beautiful in IE9?

  WHY don't pictures suddenly not appear or display in my personal messages gmail using Firefox 12.0 AND 13.0 but I can see the beautiful in IE9? This isn't a problem with the images being seen on Web sites or in emails from various sites like Amazon, Bloomies, etc.. It is a problem with the images, copied and pasted while composing mail in GMAIL and the other Windows Live email accounts, etc. It started suddenly yesterday when I still had version 12.0 Firefox. (there may be a few days, but I hadn't been reading emails too for a few days due to time constraints). This morning I tried to find some fix for this by searhcing constantly through the web and through the forums of Firefox here. I checked my version of Firefox and also check for updates after about 2 hours of research from the forums without success and I was about to just get rid of Firefox 12 because some people were just that frustration with finding no solution, when suddenly, I got a message from Firefox 'urge' Update update me Firefox 13. It was AFTER I had just checked an hour earlier to see if there's an update! I did this update to version 13.0, BUT again, I do not receive emails containing images with these images posted (messages sent from my other e-mail account for myself and also e-mails to a friend - the two images containing). However, I can send and receive your same emails through IE9 in my gmail account and see all of the images of the FINE through IE9. What gives? I am so tired of what's going on. It happened before about a year or two ago, but I do not remember how it was corrected for ever. According to me, it has been resolved by a Firefox patch, and no action on our part. And these 4 + hours of work on that is just crazy. WHO has that kind of time to devote to fix these defects that occur every time updates of Firefox? I can not even find any mention of the same show. Now I'm seriously behind. You talk about time constraints! Anyone else having this problem? Someone at - he found a cure yet?

  Is he missing pictures then make sure you are not block images from certain domains.

  • Check the permissions for the domain in the active tab in "tools > Page Info > Permissions.
  • Check that the images are enabled: Tools > Options > content: [X] loading images automatically
  • Check exceptions in "tools > Options > content: Load Images > Exceptions.
  • See the tab "tools > Page Info > media ' for blocked images (scroll all the images with the cursor key).

  If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

  Make sure that you do not block the images of third parties, the pref permissions.default.images must be 1.

  • http://KB.mozillazine.org/Images_or_animations_do_not_load

  There are also extensions (Tools > Modules > Extensions) and security software (firewall, antivirus) that can block images.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Unable to connect to a network printer, but can see and discover

  I'd appreciate any help with this: I have exhausted my Google searches for most of the day, and Microsoft support articles are of course a great help.

  The problem: I have a printer installation on one of the XP Home computers in our home network (all the XP Home computers). I am trying to connect to this printer from another computer, but I'm unable to add through the "Add printer" Wizard While I can see the printer in the list of printers on a network (including two other printers on other machines that work), when I try to connect to this particular printer in question, I am struck with a challenge to connect with what seems to be the guest account on the computer. There is no password for this account so I leave the password blank, and I then told me that I do not have sufficient permissions. I don't know what to do.

  A few pieces of my Google-ing info that may be useful:

  (1) I made sure that the guest account is enabled and even perform the active command of the net user on the computer in question.
  (2) I use Windows Firewall and I said to turn on the printer and file sharing and have exceptions for such.
  (3) I use Microsoft Security Essentials.

  (4) given that it is XP Home of course I can't access everything related to security or other policy.

  In addition, whenever I try to access this computer on the Working Group, it says I have "insufficient permissions". I don't know what it means that I've never been specified no restrictions when I ran the Network Setup Wizard.

  Windows networking works better if you have matching user accounts password on each machine rather than try to rely on the guest account (which is a security hole).

  See the following tips from the old MS MVP Malke.  He's old, but it's always good.  Not everything can be applied to your situation; Take the parts that do.

  The best and simplest is to buy a wireless router. This way you get Internet connectivity both machines and the added benefit of security more between you and the Internet. Then you configure your network wireless safely, and then you configure file/printer sharing. Here is information on the implementation of a router and also in networking. It seems long, but don't be intimidated. Setting up a router and the LAN of sharing between two computers takes about 15 minutes.

  The router configuration

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.

  2. attach a cable (usually supplied with the router) course Ethernet cat5e Internet/WAN port of the router to the Ethernet port on the cable modem.

  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.

  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

   

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar.

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). If you have a newish computer, you will be able to affect security WPA2-Personal Mode. Do this and enter a password. The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the Ethernet cable and wireless of the computer should see your new network. Enter the password you created to join the network and start surfing.

  *****

  B. file/printer sharing of

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• Who can mark a correct answer?

  Hi all

  I simply acknowledge this message in my stream of connection:

  

  The thread is How can I unlock a user locked to MOSC?

  Is it possible for someone else as the thread opener to score a correct answer or helplull? If Yes, who is allowed to do this and in what cases?
  Or is some sort of bug in the display of the stream?

  concerning
  Kay

  Our guideline for moderators is not mark as correct answers on behalf of the author, the author of the thread being the only person who can tell with certainty whether question responded. They do so only as an exception, but you should not see that all the time in MOSC. Moderators are supposed to use the mark the thread as option supposed to answer rather than mark a correct answer. If you notice this happens frequently, please let us know so that we can educate the moderator accordingly.

  Concerning

  Mike

• I want to do the "Java EE 5 Compatibility Test'.who can help me?

  My custmer product want to join the list of Java EE compatibility as this page: http://www.oracle.com/technetwork/java/javaee/overview/compatibility-javaee5-jsp-141098.html
  but I don't know which Department should I cotract with in oracle. Who can help me?

  John wrote:
  My custmer product want to join the list of Java EE compatibility as this page:http://www.oracle.com/technetwork/java/javaee/overview/compatibility-javaee5-jsp-141098.html
  but I don't know which Department should I cotract with in oracle. Who can help me?

  Well you certainly found in the wrong place here!

  The forum discuss something like the process of proof of success that individuals can win, it does not deal with product certifications.

  It is possible that one of the forums under (http://forums.oracle.com/forums/category.jspa?categoryID=285) may be a more appropriate place, but I can not really help you a lot

  ~~~~~~~~~

  I guess you have a j2ee server not on this list (http://www.oracle.com/technetwork/java/javaee/overview/compatibility-javaee5-jsp-141098.html), you need to certify.

  ~~~~~~~~~

  It can... or maybe not... that's your starting point...

  JSR-000244 JavaTM Platform, Enterprise Edition 5 specification
  (Final version)

  It is the version final of this specification, as described in Section 3.5 of the Java Community SM, version 2.6 program.
  Specifications:

  * If you want to read the specifications of assessment, or build an application that uses the specification, click here:
  Download
  * If you want to build an implementation of the specification, click here:
  Download

  ~~~~~~~~~~~~~~~~~~~~

  Otherwise in general, I think that http://jcp.org can be your starting point.

  See also:

  http://JCP.org/aboutJava/communityprocess/final/jsr244/index.html

  More references,

  References:

  http://en.Wikipedia.org/wiki/J2EE#Java_EE_5_certified
  http://www.Oracle.com/technetwork/Java/JavaEE/community/index.html
  http://Java.Sun.com/J2EE/vendorltr.PDF
  http://www.Oracle.com/technetwork/Java/community/index.html
  http://www.Oracle.com/technetwork/Java/JavaEE/Overview/index.html
  http://en.Wikipedia.org/wiki/Java_Community_Process
  http://en.Wikipedia.org/wiki/Technology_Compatibility_Kit

  ~~~~~~~~~~~~~~~

  Thank you for treating me like a grocle unknowing who has anwered your plea for directions without know what he's talking about!

  Published by: bigdelboy on April 8, 2011 10:30 (Changed link to the Java Forum)

• How can I specify who can read my downloaded FolderLink file? (Box)

  I have downloaded a jpg file in box following your instructions, but was surprised that I got the opportunity to choose which users can retrieve the stored jpg. The instructions in the box before you actually download anything refer to choose a
  recipient 'swap', but no option appeared in my record and download. Which is the selection of who can read this jpg file is no longer available in the box?
  Thank you, Ralph M. Deal, new FolderLink and a shared file photo frequent.

  How will box or any other provider who the people are. They do need an account with this provider to see the mail. That's the whole purpose. Anyone with the URL can open it. But only those with the URL, there no process to go through. (security by obscurity)

  Now before you start safety, be aware that your jpg if attached to an e-mail slide all over the internet, so it was getting delivered to plain text, still no required password and certainly no encryption.

• Is it possible to configure iOS (iPad) to allow a gesture "tap" replace the "swipe" gesture  We have a disabled person who can "type", but cannot "drag."

  IOS (iPad) can be configured so that a "tap" gesture can replace the gesture of "swipe"?

  We have a disabled person who can make the move "tap" but can't make a gesture of 'swipe' successfully.

  We know there are lots of things blow that imagine us that a tap on the right side of the screen would replace the kick from the right to the left, and so on for the other sliding directions.

  It should be possible to use AssistiveTouch for this. I have not explored fully, but it seems that you can create a menu of actions that you may need, and use the AssistiveTouch menu button to control what gesture is used for the next take. Creating click options, by scanning left and forehand would suit your username.

  See using AssistiveTouch on your iPhone, iPad or iPod touch - Apple Support for more details.

  TT2