User who can see different patterns

Similar Questions

• Create the table and take the name of user who can read/write on this table

  Dear gurus,
  
  I need to add the following column in Oracle 11g DB AND also add the name of user who can read/write ONLY the following table, any table to access the same read?
  
  I use to go to Oracle PL/SQL client.
  
  My dbname is 'customerdb '.
  
  TableName: "extractOrders."
  
  +: example of the field data.
  Column0 = logID: 1
  Column1 = idNumber: 39D13613-F061-D38D-100A-16536409C6D8
  Column2 = timestamp: 2011/07/11-13:45
  Column3 = resultCode: 40509
  Column4 = resultMessage: could not find the IDENTITY card
  Column 5 = number: 9813080808
  Column6 = iid: 87670200100001466100
  Column7 = products: D1430 | "' S1412 ' | "" S1407 | "' S2607 ' | "' S1417 ' | "" S1411 | "' S1413 ' | "" S1502 | "" S1406 | "' S1522 ' | "' S1524 ' | "' S1474 ' | "" S1473 ".

  user596669 wrote:

  I need to add the following column in Oracle 11g DB AND also add the name of user who can read/write ONLY the following table, any table to access the same read?

  I use to go to Oracle PL/SQL client.

  Let's say your table than extractorders is the schema of database clientsproperty.

  As this pattern create a stored procedure that runs with the privileges of the customerschema. Having this procedure return a ref cursor For example

  create or replace procedure ReadExtractOrders( c in out sys_refcursor ) authid definer is
  begin
    open c for select * from extractorders;
  end;
  

  As this code executes with the privileges of the customer schema it can read the table belonged to this scheme.

  Now give execute rights on this process for the Joe database schema - and this pattern can create a cursor on the table of ExtractOrders , without being able to access or use directly or refer to this table. Read access to this table is therefore protected by a reliable code belonged schema customers.

  Learn about the AUTHID clause and how it can be used to differentiate the code approved and non-approved, which allows to PL/SQL code to run with different privileges than the demand for prescriptions.

• How to get more cards in Freecell for aunt of mu who can see hardy?

  Once there was in an earlier version of Freecell the possibility to enlarge the maps even up to the sides of the screen. For the aunt of mu, who can see hardy what is happening on the screen, I like to create such a possibility. I already changed the lower resolution (800 x 600). Thank you.

  Thanks again.
  The real solution is to be found here:
  http://www.solitairelaboratory.com/fcpro.html

  After watching the game for the first time, you need to change the card measures.
  Greetings.

• Except me, WHO can see {[link to] my Revel Albums/Photos/videos?}

  Hello
  Except me, WHO can see {[link to] my Revel Albums/Photos/videos?}
  Is it PUBLIC? Or completely private? (although on the net, nothing can be totally private, I know...)
  I'm a bit confused with use of Revel "share online".
  See you soon!

  If you share a link to an album, only the ones you send this link to see it in a browser. This does not require anyone to have an account of Revel except the owner of the album.

  If you share a library, only those people that you send and invite you to him (and must have an account to Revel too) will be able to see it. They will also be able to access, edit, comment, etc.

  So, Yes, libraries and albums are private unless share you them with people and you have chosen to share with the people that these people themselves.

  Glenyse

• How to craete a user who can only browse the dashboard?

  Hi friends,
  How to create a test user that can only browse the dashboard and not able to modify reports using answers?
  
  Please tell me the steps.
  Thank you

  Bob,
  Add groups to the RPD, sort users into groups either in the RPD directly or using init blocks in a GROUP variable. Create groups presentation with the same name and users inherit automatically the member ship providing that the names are the same.

• Other user accounts can see items on the desktop on my user account?

  Hello

  If I save something in my office, sign out, and then someone else use my PC and sign as themselves. Can they see what I recorded on my desk?
  Thank you
  Sarah

  Hi SarahWest,

  No, they will not see items that you have saved on your desktop in your user account.  Each user account has unique settings and preferences.  See the following article for more information:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-user-account

  I hope this helps!

• create the user who can update another table schema

  Hello

  We have a system of prod in which we need to update the schema of the application running the declaration different update and create/run function, procedure, package bodies. It is very easy if you use the schema owner. But I need to run the activities of another user due to some restrictions. How can I do?

  Can u suggested to update any table privilege... but this would give all access table dictionary also.

  Is there any privilege that would allow any other user update another schema table without using the schema name before the name of the table?

  PLSS suggest

  John,

  Can we use public synonym for that?  I don't know if the risk of security for her:

  SQL > connect h/h

  Connected.

  SQL > select * from scott.emp;

  Select * from scott.emp

  *

  ERROR on line 1:

  ORA-00942: table or view does not exist

  SQL > connect scott/tiger

  Connected.

  SQL > create public synonym scotemp for scott.emp;

  The synonym is created.

  SQL > connect HR/hr;

  Connected.

  SQL > select * from scotemp;

  Select * from scotemp

  *

  ERROR on line 1:

  ORA-00942: table or view does not exist

  SQL > connect scott/tiger

  Connected.

  SQL > grant select on emp to HR;

  Grant succeeded.

  SQL > connect h/h

  Connected.

  SQL > select * from scotemp;

  ..

  ..

  14 selected lines.

  SQL > show user;

  The USER is 'hr '.

  SQL > update of ename set scotemp = 'SMITHX"where empno = 7369;

  setting a day of scotemp set ename = 'SMITHX"where empno = 7369

  *

  ERROR on line 1:

  ORA-01031: insufficient privileges

  SQL > connect scott/tiger

  Connected.

  SQL > grant update on HR emp;

  Grant succeeded.

  SQL > connect h/h

  Connected.

  SQL > update of ename set scotemp = 'SMITHX"where empno = 7369;

  1 line update.

  SQL > rollback;

  Complete restoration.

  SQL >

  Concerning

  Girish Sharma

• Can I change my Start menu, the icons on the desktop (shortcuts) to my TV screen and displays both monitors so I can see different things on each monitor

  I have an old Dell Latitude E6500 running Windows 7 Pro and think my screen on my laptop is going to bite the dust and can't understand how to show my start menu, desktop and screen icons (shortcuts) on my flatsceen TV, so I could still run the laptop if the monitor on it turns off, without duplicating the image which limits me to not be able to have different things on each monitor as in "extend displays it" does

  Hello Tony,.

  Thanks for posting your query on the Microsoft Community.

  I suggest you follow the advice given by Ralf_G answered September 25,2010 from the link given below and check if that helps.

  Reference:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/extend-displays-not-working-in-Windows-7/30828f33-5a64-4e22-AD70-b3bd8e6d8580

  Hope this information is useful. Please let us know if you need help with Windows.

• What is the proper way to create a user who can connect through the Console, but not through the VMWare Client?

  I did the following steps:

  1. create a user

  2. assign the Group root (remove all the other group of the user)

  What's my not just?

  Thank you!

  It is the way to do it.   Either you must be part of the root group to be given to the role admin (or a bespoke) at the level of the host to access the DCUI.

  If you create a user is added to the root group, but is assigned all permissions (either singularly or through a group) on the host then, then the user will be able to connect to the DCUI but not the client vSphere (or any other method of the API).

• He can see 3 icons on the home screen in the windows client

  When I connect to my host via vsphere client windows, I see 3 icons - inventory, the roles and the system will connect, I created a role that has access to all privileges assigned to a user on the object, but when I log in as a user I can see that the 3 icons and have seen other people with a lot more screen screenshots. Any help on how to get this would be much appreciated. I use 5.5

  What you see depends on if you connect directly to an ESXi host, or a vCenter Server. What you describe, it seems that you are directly connected to an ESXi host.

  André

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Only Super users can see the hierarchies created by collector vCloud?

  I recently installed 1.5 Chargeback and the Director vCloud data collector.

  The collector seems to work great, it creates hierarchies of vCloud Director organizations and gathering usage statistics.

  I noticed however that only the Super user role assigned users can see hierarchies created by vCloud Director, even users with administrator role apparently do not have enough privileges.

  Someone at - it using vCloud Director met with a similar problem? I'd love to hear about how you went to solve...

  Thanks in advance,

  Mason

  Hi Matty,.

  Your observation is correct. By default, only users with superuser role can see vCloud hierarchies.

  The reason for this is that internally vCloud Director collector of data uses chargeback API to create hierarchies of vCloud using chargeback super-admin (the user created during installation of chargeback) credentials. That is why chargeback super-admin is owner of all the hierarchies vCloud. The role of super-admin chargeback is the superuser, any other user who has superuser role can also see vCloud hierarchies.

  The question in front of you can be resolved by forestry as a chargeback super-admin and giving the rights with the appropriate permissions on the vCloud hierarchy to any other user. Go to the 'Users and roles '-->' permissions' tab to do this.

  I hope this helps.

  -Amrainder

• How can I configure Server 2008 R2 to disconnect users, who have been disconnected more than exodus 12 hours?

  How can I configure Server 2008 R2 to disconnect users, who have been disconnected more than exodus 12 hours?

  These MS Answers forums are intended for the home rather than the it professional user. Please transfer your question in the relevant Microsoft Technet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.      :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms

• Who can I show message to user when it closes my request?

  Hi all;

  Please tell me

  Who can I show message to user when it closes my request?

  Thank you

  This is probably what you are looking for. This is impossible with the code in the handler of exit() signal since at this time the scene of the UI is already stopped, and everything you try to send to the screen will be lost.

  haf - med wrote:
  Hello
  Thanks for your help, but I need a method that when used to complete my request I show him a message with 2-button 'ok' and 'Cancel' if it click 'ok', the firm application and it click on 'Cancel' the application thus identified.
  Please give me a sample code in qml if possible.
  And thanks in advance.

• Can't see my Windows 7 user account (users\John) in Windows Explorer. I search/modify it from the control panel. I can see it from the command prompt. What gives?

  I use Windows 7 and everthing works apparently fine.  However, I can't see my account of user (users\John) in Windows Explorer.  I see the default administrator. Accounts and account "TempAdmin" I just did.  I search/modify 'John' in the control panel.  I can see ' C:\Users\John > ' from the command prompt and the view (dir\) directories, but it is not there in Windows Explorer.  What gives?

  I use Windows 7 and everthing works apparently fine.  However, I can't see my account of user (users\John) in Windows Explorer.  I see the default administrator. Accounts and account "TempAdmin" I just did.  I search/modify 'John' in the control panel.  I can see ' C:\Users\John > ' from the command prompt and the view (dir\) directories, but it is not there in Windows Explorer.  What gives?

  It is a file system / hidden?

  May not, your settings in Windows Explorer is configured to be able to see (display hidden and system files/directories).