Excessive PEF, cfa files

Similar Questions

• Photoshop cc 2015. Photomerge does not open Pentax PEF files in Bridge or Photoshop.

  I use a Mac Pro with El Capitan. It wasn't a problem for me until the last update of photoshop. Pentax PEF files does not open Photoshop CC 2015, Photomerge. I tried to open Raw Pentax PEF files to my 645Z in bridge-tools-photomerge both file-automate-photomerge in photoshop. Neither the program recognizes the Raw PEF file. Instead, I get this message that Photomerge is in need of at least two selected files. The files the other cameras RAW always opens in photomerge.

  Curiously, the Pentax PEF Raw files open in Adobe Raw Converter and open molten at panorama in Adobe's Raw Converter.

  I uninstalled creative cloud including my preferences and reinstalled creative cloud with photoshop and bridge. I have reset the bridge preferences.  I checked under the bridge, Healt folder as photoshop cc is selected for the Raw of Pentax PEF file. None of these actions corrected the problem.

  A solution would be much appreciated.

  Mike

  Well I finally understood why photomerge did not work on my PEF files. Through a process of elimination, I narrowed the issue down, not a problem in photoshop or bridge, but the way I scored a record believe it or not. When I created and marked a record of a recent meeting of nipples raw files, I added a slash between the digits of the date as this 09/11/15. Once I removed the slashes that everything was back to normal photomerge was able to recognize raw PEF files in this folder.

  For some reason, the slash prevented photomerge to recognize raw files in this folder. Yet these same files could still be addressed to panorama of in camera raw. Go figure.

  I searched for the answer to this problem without success it's just by chance and a lot of reading that made me try to rename the folder up and down. I hope that this solution will help other people who may come across this problem in the future.

  Mike

• The CFA (cache files) are too big, can I delete or move to another drive?

  What are the importance of CFA files so I am done editing a sequence? The CFA (cache files) are too big, can I delete or move to another drive?

  Is no need to delete as soon as you restart first they will be generated again.

  You can reinstall them in the preferences and the media.

• Open old files on new HP Envy?

  Bought the new HP envy & had files, folders, etc. of the former pitcher of tasks Microsoft work transferred but cannot open them. Windows 8 asks me if I want to "open app in the App store?  How can I get to excess / open these files?

  Hi Mary,

  Welcome to the Microsoft community.

  Try the steps below to find work applications in the Works Task Launcher:

  Method 1:

  Follow the steps.
   
  1. Open Works Task Launcher
  2. Click on the Quick Launch bar menu drop-down (top right)to decompress
     This will display the icon set for the Applications to Microsoft Works

  Method 2:

  You can also try

  Open Works Task Launcher
  Click on the programs tab
  Select the application of work required in the list of application Works Suite(on the left side)
  

• I have a lot of folders of files under "Windows" of this variety "$NtUninstallKB886185$". I've been collecting them since 2005 apparently. What is? I can remove them?

  Excessive accumulation of file under C:\Windows

  They are the patches from Windows Update uninstall files. If you never want to uninstall the updates in particular, you can remove them. Do not remove anything else except the folders called ' $NTUninstallK [a few]. MS - MVP - Elephant Boy computers - don't panic!

• Make files hidden media?

  What is the point of this folder? Whenever I start PP a few minutes while working on a project of my SSD is full with more than 30 concerts of this shit that makes it so I can't save or export because it fills the reader. And every time I remove my project is fine its exactly how I left it, but the files keep rebuild no matter how many times I remove them.

  So, what are they do other then to be boring?

  Hi DennisJa,

  Matter what Premiere Pro video and audio in some formats, she transforms and caches versions of these items that he

  easily accessible when generating previews (these are the media Cache files). Imported audio files are each followed a new .cfa file and MPEG files are indexed in a new .mpgindex file.

  The media cache greatly improves performance for previews, because the audio and video elements do not need to be reprocessed for each preview.

  To clean the media Cache:

  Edit > preferences > Media (Windows) or Premiere Pro > Preferences > Media (Mac OS)

  Thank you

  Ilyes Singh

• Cash videos to appear in your media files?

  Hey, I don't know yet if it's the right place, but I hope that someone will be able to help. I am on Windows 10, every time I play a movie on my computer using the standard windows media player program, 3 files pop up in my Adobe > commune > file folder media in species that are * movie name * .cfa .pek .ims. It would be good only especially .cfa files occupies a lot of space and I have no idea what this file is, what its for or how he got still there? someone at - it ideas? I did not open these files first pro in fact since the download that I have not used at all however I noticed that others had problems with the media file counting so I thought this might be the best place for this...

  Thank you

  Teddi

  Hi teddia58078258,

  I am on Windows 10, every time I play a movie on my computer using the standard windows media player program, 3 files pop up in my Adobe > commune > media folder files of cash that are * movie name * .cfa .pek .ims.

  I haven't tried to reproduce this on my machine Windows 10, none of the files are added to my media Cache directories. Not really sure what goes on there!

  I have no idea what this file is, what its for or how he even got it? someone at - it ideas?

  More information on PEK and CFA files: extension PEK and CFA

  Thank you

  Regalo

• bad audio file

  I don't really know what's happening or what's causing this problem.

  When I read my calendar, all of a sudden my audio file reproduces the wrong file. If I "reveal in finder" he links to the correct file. Even if I "reveal in the project." If I double click on the file and view it in the Viewer window, the clip is titled "using this script", which is the bad title of the clip. I don't know even where this title comes from.

  This problem occurs randomly. I erased the media cache. Don't know what else to do.

  This file is likely to contain audio compressed, which will be similar to the import. Once again, how exactly are clearing the cache of media? You need to clean the files from the cache manually by finding the CFA files (located in the folder of media Cache files, situation which is defined in the preferences of media) and delete in the Explorer OS files, not through the 'Clean' function in the media browser.

• Project imported from another computer, the audio files are jumping or any waveform?

  Hey everybody,

  I import a project from another version to date of first Pro CC 2014, it was working fine on another computer but on import some audio in the order and in the source monitor are jump or play just back all choppy as a bad CD. Some audio in the Control Panel Assembly have no waveform. I tried to replace some, that works, but there are a LOT of audio to replace and I'm not 100% sure those who read evil or of the previous editor.

  I visited, re-rendering, clear cache and it always does. I'm not sure what is the problem. Also sometimes when I try to make the entire project for the preview, it gives me 'cannot compile the film' unknown error.

  Any advice/help would be appreciated. Thank you!

  Pense thought to it, here's what I did in the case where someone has a similar problem - had to remove manually everything in the 'Clean' media Cache files did not really work. Am entered and removed everything for re - conform files, worked for some files, but not all. Turns out that on the other drive, there were some PEK and CFA project hidden files in this local disk. I searched .cfa files both .pek and all removed so first can regenerate new ones.  Things work now

• Missing audio in mp4 AAC made the files in watched folders

  With the help of 2014.2 encoding for the mp4 file coding in 4 different resolutions

  2 different HW systems - Windows 8.1 64, Intel i7, SSD, Nvidia SLI of GTX 780 x 2

  Records of watched configured with 4 different presets

  About 20 mp4 moved to looked at the file and waited for the caching is done

  After encoding the first 2 or 3 files are OK (in all 4 resolutions), but others have only 1/3 of the audio

  Cache cleared, moved to other video files to disk - no luck, the same problem - blocks, lack 2/3 audio

  This could be linked to the cache.problems?

  Entirely coded files have onle a pair of .pek and .cfa files

  Partial audio encoded files have 4-8 .pek .cfa files with extension _1 _2 _3

  Parameters of the sample source file:

  ==================== General =====================
  Format: MPEG-4
  Format profile: Base Media / Version 2
  Codec Id: mp42
  File size: 1.15 GB
  Duration (in ms): 25 min. 44 sec.
  OverallBitRate_Mode/String: Variable
  Total flow: 6 390 kbit/s

  ===================== Video =====================
  Id                          : 1
  Format: AVC
  Format info: Advanced Video Codec
  Format profile: [email protected]
  Use of CABAC: Yes
  Reframes: 2 pictures
  Settings - The format GOP: M = 4, N = 15
  Codec Id: avc1
  The codec info: Advanced Video Coding
  Duration (in ms): 25 min. 44 sec.
  Rate mode: Constant
  Bitrate: 6 000 Kbps
  Width: 720 pixels
  Height: 576 pixels
  Aspect ratio: 4:3
  Framerate mode: Constant
  Framerate: 25.000 fps
  Standard: PAL
  Colorimetry: YUV
  Colos space: 4:2:0
  Color depth: 8 bit
  Scan type: Progressive
  Bits /(pixel*Frame): 0,579
  Stream size: 1.08 GB (94%)
  Language: English

  ===================== Audio =====================
  Id                          : 2
  Format: AAC
  Format info: Advanced Audio Codec
  Format profile: LC
  Codec Id: 40
  Duration (in ms): 25 min. 44 sec.
  Rate mode: Variable
  Flow rate: 384 Kbps
  Maximum flow: 559 Kbps
  Channels: 2 channels
  ChannelPositions: Front: L R
  Sampling: 48.0 KHz
  Compression_Mode/String: lossy
  Stream size: 70.3 MB (6%)

  Example of setting export file:

  ===================== General =====================
  Format: MPEG-4
  Format profile: Base Media / Version 2
  Codec Id: mp42
  File size: 493 MB
  Duration (in ms): 26 min 14 s
  OverallBitRate_Mode/String: Variable
  Total flow: 2 625 kbit/s
  © TIM: 00:00:00:00
  ©TSC                        : 24
  ©TSZ                        : 1

  ===================== Video =====================
  Id                          : 1
  Format: AVC
  Format info: Advanced Video Codec
  Format profile: [email protected]
  Use of CABAC: Yes
  Reframes: 3 frames
  Settings - The format GOP: M = 3, N = 24
  Codec Id: avc1
  The codec info: Advanced Video Coding
  Duration (in ms): 26 min 14 s
  Source_Duration/String: 26 min. 14 sec.
  Rate mode: Variable
  Bitrate: 2 495 Kbps
  Maximum flow: 3 200 Kbps
  Width: 1 280 pixels
  Height: 720 pixels
  Aspect ratio: 1,944
  DisplayAspectRatio_Original: 1,945
  Framerate mode: Constant
  Framerate: 24,000 IPS
  Standard: PAL
  Colorimetry: YUV
  Colos space: 4:2:0
  Color depth: 8 bit
  Scan type: Progressive
  /(pixel*Frame) bits: 0.113
  Stream size: 468 MB (95%)
  Source_StreamSize/String: 468 MB (95%)
  colour_primaries: BT.709
  transfer_characteristics: BT.709
  matrix_coefficients: BT.709

  ===================== Audio =====================
  Id                          : 2
  Format: AAC
  Format info: Advanced Audio Codec
  Format profile: LC
  Codec Id: 40
  Duration (in ms): 26 min 14 s
  Source_Duration/String: 26 min. 14 sec.
  Rate mode: Variable
  Flow rate: 125 Kbps
  Maximum flow: 200 Kbps
  Channels: 2 channels
  ChannelPositions: Front: L R
  Sampling: 48.0 KHz
  Compression_Mode/String: lossy
  Stream size: 23.5 MB (5%)
  Source_StreamSize/String: 23.5 MB (5%)

  Cannot replicate the same problem with other compressors, as Sorensen Desktop 10

  Which is wrong with Adobe encoder 2014.2?

  Yes, full disc for temporary files is the only cause of audio missing

  Eliminated from the start, but still have the same problem on 2 systems with temporary SSDS (half full after batch catcing)

  Solution that works for me:

  1. open SOUL

  2. move control folder 20-30 files

  3. wait that all catches files (in "Adobe TRAN Files" folder is no file name long temp)

  4. open the file 'Adobe caught files' and run ' name: _1 GOLD name: _2 GOLD name: _3 GOLD name: _4 "about Windows Search. Select all and delete.

  5 clear trash (disc is full very fast)

  6. start encoding

  From my experience, while starting the encoding SOUL create only couple _1 versions of files in batch of 20-30, and so far, all have the sound

• Partition 32G BootCamp, Virtual Disk - flat hard 125G file!

  Hello

  I recently installed VMWare Fusion on my laptop OS X I have created a BootCamp partition and installed XP. I created a partition of 32 GB for XP. I noticed my OS X partition to fill quite quickly. I used "from" to find the culprit and it's a 125 G file created by VMWare Fusion! Is this normal? This seems excessive. The file is located:

  / Users/tammy/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp of Camp/%2Fdev%2Fdisk0/Boot partition.vmwarevm/Virtual disk - flat hard

  Is it possible to get a little less of my OS X Fusion disk space use?

  Thank you.

  Tammy

  Well, I had to do a little research and what I found out, is that you can not directly mount a virtual secondary drive while he lies in the Boot Camp Virtual Machine partition and I've tested this with both one unformatted and formatting virtual hard drive and got the exact error and message in the absence of additional information in the log file then here is what you can do.

  You can modify the Boot Camp partition.vmx change ide0:1.present = "FALSE" ide0:1.present = "TRUE" then boot partition Boot Camp Virtual Machine and see if the disc is visible in Windows Explorer and if it is not then it has not been formatted and contains nothing, in which case you can remove it from the virtual machine and leave within the Boot Camp partition Virtual Machine package or...

  Move the file Disk.vmdk virtual and Virtual Disk - flat hard to the desktop, press ctrl + click on the Virtual Disk.vmdk, and then select open with > VMDKMounter and see what message you get if any.  If it does rise and you get an error message appropriate then it can be deleted safely

  Understand that even if I know it's a pain in the thigh but I need something technically absolute that is within reasonable limits, before I will advise someone to delete a virtual hard disk and I hope you understand the reasoning and wisdom behind this!

  Post edited by: WoodyZ

  I forgot to mention that if you choose to modify the Boot Camp partition.vmx this must be done with closed merger.

• Do I need these media Cache files?

  Just found out that they are the reason my disk 1 to C is full. I have 440 GB "CFA file", "PEKFile", "MMPGINDEX" files hidden in my username/users/App

  The Cache of data/Roaming/Adobe/Common/Media directory. File names of my Edius editing and Encore DVD/BRD projects - I do not use first. Some are projects that are completed but some current. What are they, do I need them, can I delete all, can I still stop making them in the future?

  These are cache files; Yes, you can remove them safely; No, in will always make them.

  Set up a customized Windows search to find these files in the future and remove them all at once.  And if you go in first preferences, you can tell Pr to store the files somewhere other than your C: drive.  It is a way of forcing to do the same thing, depending on your version of fr.

  -Jeff

• Remove the icons from borrowed Col

  I would like to remove all the excesses of the files/icons that have built up on my system. Customize right click on the choice of task bar and then last used items?

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;283084

  I hope this helps.

  You asked this question before, if the above did not help you then, try this thread of material of tom,.

  http://www.TomsHardware.com/Forum/102221-45-system-tray-past-items-removal

• old clichés

  Is there any official document vmware dealing with impact do not remove the old clichés of virtual machines - i.e. the performance problems they can cause on the virtual machine itself?

  Our admin doesn't see these as a risk at all - but I read old clichés can affect the performance of the virtual machine - but I can't seem to locate any official document where VMware discuss potential issues do not remove the old clichés. To demonstrate this is not not an old wives tale.

  You are absolutely right... This does affect not only the virtual machine, but also the back-end storage matrix which could affect the other VM too.

  http://KB.VMware.com/kb/1025279

  • An excessive number of files delta in a string (caused by a too many snapshots) or large delta may cause a decrease in VM and host performance.

  http://pubs.VMware.com/vSphere-50/topic/com.VMware.vSphere.vm_admin.doc_50/GUID-53F65726-A23B-4CF0-A7D5-48E584B88613.html

  • Snapshots can adversely affect the performance of a virtual machine. Performance is based on how long the snapshot tree or capture instant is in place, the depth of the tree, and how the virtual machine and the guest operating system have changed since the time took you the snapshot. Also, you may see a delay in the amount of time it takes the virtual machine to turn it on. Do not run the production of virtual machines of shots on a permanent basis.

  Post edited by: Jon Munday - added additional URL

• Pe11: default project settings = last used project?

  I read here somewhere (I can't find the thread again) PE11 still used as project default setting (so before one is added to the assetspanel or timeline) your last project project settings?

  Is it more right?

  In my case PE11 always chooses 1080i 25 new empty projects while my projects (and images) are in 1080 p 50. So every time I choose new project / settings etc.

  I want to reinstall PE11 (uninstall, ccleaner, reinstall and reconfigurate) after completing my current project, but I have to be shure firstly that PE11 uses as default empty project projects last one that has been used...?

  In accordance with the standard audio in files IS normal. This stream Audio (through each file) conforms to the 48 kHz 32 bit floating point for extremely precise editing. This process creates the CFA files, which are what pre will have access on the Timeline, then the PEK files for waveform display. Let the consistent process the full standard 100% to all files imported, before making any change. This article goes into details: http://forums.adobe.com/message/3892177#3892177

  Good luck

  Hunt