Exchange the cast member 1 with cast member 2

Similar Questions

• Exchanging the 500 GB HDD with a SSD 128 GB on a fancy m6 1101-so

  Hello

  I was trying to replace/change the 500 GB HDD with a 120 GB SSD installed on this laptop. My plan was to use the SSD as boot drive and the HARD 'normal' storage disk in a cradle of HARD drive in the optical drive Bay. But my problem is that during the backup of the disc at first, I did install, the installation leaves boot loop once the installation is finished and he wants to start windows for the first time.

  All those who know what is my problem? At the beginning I had problems with even getting to the start screen, but I solved it with the boot and installation of windows with the BIOS in legacy mode.

  Hope that there is a magician who could help me.

  You cannot use recovery discs that you made from 500 GB HARD drive to restore a 120 GB drive in most cases.

  You can clone the SSD HARD drive. (Note: total capacity used on the HARD disk must be less than the total size of SSD for cloning to work). Use Macrium reflect free cloning tool & SATA Adapter USB to connect the SSD for laptop by USB.

  Concerning

  Visruth

• using members of the cast with the case of the declaration

  Hi guys,.
  
  can someone guide me how to use a "case _ of" with the members of the cast rather than sprites?

  OK, I see. You can use the case statement and replace the
  Manager executeBranchingMenu for this example.

  ------------------------------------------------------
  on executeBranchingMenu NomMenu, commandName
  commandName case
  ("Item 1, 1"): go to frame "an image tag.
  ("Item 1, 2"): go to frame "a few other image tag.
  -etc.
  cases of termination
  end
  ---------------------------------------------------------

  But there is a solution even more simple that does not require using a case
  Statement at all. Your frame labels just name "Item 1, 1", "Item 1," 2",
  etc and use it. It will save you a lot of unnecessary code.

  ---------------------------------------------
  on executeBranchingMenu NomMenu, commandName
  go frame commandName
  end
  -----------------------------------------------

  Furthermore, nothing new in this example of a film that holds the game
  head back, then you probably want to add code to do this, otherwise, it will be
  jump to the menu. It can be added to the film script.

  --------------------
  on exitFrame
  go part
  end
  -------------------

• How to change the graphics BIT DEPTH in the casting director? 32-bit to 8-bit?

  How to change the depth of the image of Member on a 32-bit to 8-bit cast?

  Imagine that you have an image in the castmember, named "yourface.
  You have checked the depth in the message box:
  put member("yourface").depth
  -32

  EASY and SUCCESSFUL but:

  Changing from 32-bit to 8-bit BY DIRECTOR

  Edit > convert to 8-bit bitmap > framing
  You will see the image easily changed to 8-bit image.
  BUT IT'S NOT SCRIPTING

  SCRIPTS:

  Member ("yourface"). Depth = 8
  Error! You cannot set this property!
  
  I tried to do a blank image to 8 bits, then copypixel 32-bit image in one, but my face become RED and GREEN.

  How to make the script and have the GOOD RESULT YOU modify > convert to 8-bit bitmap > dithering? Thank you for your help.
  

  Copy of pixels has the property of dithering. Here are a few notes on this topic:

  Using the option to dither with copypixels.

  The copypixels command can accept a property of #Dither option. The two valid values for this property that I know are 1215 and 1969.

  anImage.copyPixels (img, aRect, aRect, [#dither: 1215])

  anImage.copyPixels (img, aRect, aRect, [#dither: 1969])

• Phone will not connect to the casting of motorcycle USB?

  I can't get my phone to connect with motorcycle Cast USB. I use Zumocast for the wireless, but I wanted to use the Cast of the bike to sync my music and videos via USB. When I plug the USB in all starts automatically. A screen appears and tells me of his preparation for my camera, then another screen appears telling me to wait, it loads the content. However, this second screen has a large yellow triangle with an exclamation mark in it and lists of things to try if you have connection problems. I tried all the USB options that I have on the phone, he seems to force the connection to USB mass storage, so I guess that's where it should be. Any help would be appreciated. I thought it might be a problem of SD card, but I'm not having problems with the map I can say.

  It turns out that it was the SD card. After reading a few posts, it seems that you cannot have all the apps installed on the SD card, so I cleaned all the. It does not solve the problem of the bike to ride, but I lived some issues with messages to appear during a download app like "not enough memory to SD card", so I hope that he will address this issue. Time will tell. What seemed to fix my bike mount question was a stopover of force on an app called Evernote. I read this solution on another post, and that seemed to take care of it. It seems that Evernote has been attached to the top of the SD card and not let disassemble.

• I could not prompt the third member of the family sharing...

  I had already invited two members of our family and use shares without facing any problem.

  But I could not invited the third member with an active apple ID.

  We (organizer and invited) the two checked the settings (on the same iTunes Store Country info, active id etc.) but no action has occurred in the system preferences > iCloud > manage family > invite new members through the '+' sign > enter id Apple of the Member

  (I forgot to transfer the image from that window, although it is within the rules and limits)

  Please can someone help me...?

  Invitation can pass after a while.

• would give old computer to the family member but you want all personal information permanently out - how to?

  Hi I have windows vista edition Home premium. You need to remove any personal information at all times so I can give to the family member. Is there a way I can do this easily and free of charge? Hope you can help. Thank you!!!

  E-mail address is removed from the privacy *.

  p.s. no category for this topic in the list.

  Hello

  Reinstall the operating system.

  If you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• The second member of these groups redolog needed another diskgroup smillar

  Dear Experts,

  Separated us + REDO diskgroup (with normal redundancy) for REPEAT 3 with redolog groups.

  Is the second member of these groups redolog needed another diskgroup smillar? Or quite simply, we can put these redolog on diskgroup even members (+ REMAKE)

  As we have this diskgroup with a failgroup on a separate physical disk.

  CREATE DISKGROUP redo NORMAL REDUNDANCY
  failgroup diskredo1 DISK
  '/devices/diska1'
  failgroup diskredo2 DISK
  '/devices/diskb1';
  

  Thank you and best regards,

  IVW

  You should have some members on the disk groups. For each redolog group should be spread on your + redo disk group and another group of disks that is physically separated from the + redo disk group. That is to say + group of DATA disks.

  http://docs.Oracle.com/database/121/HABPT/config_storage.htm#CDEJCHDG

• Not able to see the new Member shared alternative hierarchy on Smart view

  Hello

  I had to make changes on the replacement as a hierarchy below:

  1 created shared member on the new roll upward with Member Shared Property (replacing Hierarchy).

  2 removed the former member under the other roll upward.

  3 refreshed the Hyperion, planning of database.

  4 could see the new Member roll up on the alternative hierarchy after refresh.

  Now, when I try to extract data from the new hierarchy of alternative, I'm not able to get the data that I get the error message like "Invalid Grid - size XXXX member is located at the wrong location".

  I choose the option 'selection of members' members, but the grid is not valid when I try to extract data on smartview.

  Have I missed any step to make changes on the planning? I checked from myside to display the shared member on Essbase after updating of the planning application.

  Can you please help me in fixing the issue?

  Thank you.

  VERP.

  Thanks Dan.

  Tried to build the new sheet, and I was able to run successfully. Members have been placed wrongly and could fix it.

• Dynamically retrieve "rank" in the hierarchy to determine the next member to be inserted into the structure?

  Hello

  I have a hierarchy with the structures of members following leaves:

  Depending on which division they are ZEN-A, ZEN - B and C ZEN with 7 numbers after them.

  Is there a way to dynamically retrieve the Member in the ZEN-A, ZEN-B and C ZEN in three separate properties so that the user DRG can determine the next member must be added?

  For example, if I have a structure that looks like this:

  ZEN-A0000001

  ZEN-A0000002

  ZEN-A0000003

  ZEN-A0000004

  I want a property which would show the user DRG WHAT ZEN-A0000004 is the largest number so that he or she must insert ZEN-A0000005.

  Thank you!

  Hello

  How do you combine them?

  If something like this ParentABCD-AliasABCD

  Then, you can use the formula Concat to do the same thing:

  Concat ((HierNodePropValue (Hierachy2, ABBREV (), PropValue (Core.ParentName)))-, (HierNodePropValue (Hierachy2, ABBREV (), PropValue (Custom.AliasXXX))))

  Thank you

• Essbase different aliases of shared member showing that the primary member

  I have another hierarchy with shared members.  When I retrieve a particular Member in Essbase, the alias is correct.  But, when I explore the alternate hierarchy, takes the alias for the same Member of the Member below.

  Thus, in the main member of XX - alias "XX_Member".

  Member XXA - aslias "XXA_member".

  When I pull a recovery, Essbase, in substitution proposal, is showing as
  Other Parent
  Member of XX (Shared) with alias XXA Member
  EAS has the correct alias.  So, when the add-in essbase foregoing, EAS shows member (shared) with alias XX XX.  It's ONLY the Essbase recovery that shows that this badly.
  There is only one table alias in the database.  The problem does not occur with all shared members.  No idea what could be casuing it?

  ASO has a really strange behavior, without papers, regarding metadata, properties are returned by members in situations of implicit sharing (which is what you have, if the child is not marked never 'share').  The "Never share" tag is the child?

• I bought the impressive member ship + adobe, I don't have the code

  I bought the impressive member ship + adobe in 500PX I don't have the code how to install photoshop

  I need help with this please

  Because you bought on 500px, you must get your redemption of this vendor code

  Adobe provides only a redemption code when you buy directly from Adobe

• Does anyone know how to change the composition of Adobe Creative cloud AE single app to the student member that includes the creation?

  Does anyone know how to change the composition of Adobe Creative cloud AE single app to the student member that includes the creation?

  Hi Danielle,

  Thanks, I tried to do but unable to communicate with anyone.

  Here you go: Contact customer service

  Thank you

  Kevin

• Rule RTP company fills only the first member of the form

  Hello

  I have a form where the accounts are in lines and measures in columns.

  I have created a business with the {FormAccounts} Variable rule (TYPE: members ... is not a member). Variable is used in the declaration of FIX, so that the calculation applies only to members of the selected account.

  When I select several accounts (online) and BR (via right click Menu) on the appeal form, the guest opens and only the first member of the selection is filled in the variable. When I run the BR, the calculation is applied to this member (which is OK)

  However, I can select several members by clicking the Member Selector and add more members to the variable. The calculation is properly invoked for these members.

  So my question is, why my variable get filled with selected members (I tried selecting names of members [who selects all lines], cells). The variable is RTP, because I wanted to see which members are getting selected, otherwise it may be hidden.

  
  

  Somehow the BR integrated: setting-> adjust the data is used when several data cells (members) are selected. Basically, I want my BR to be populated with selected members of the form adjust data works the same way.

  Is this a bug or planning simply cannot fill custom variable br with several selected members of the form.

  I don't make any sense?

  Thank you in advance...

  Sašo

  I think that this is how it works. I tried with a variable whose type is members.

  It is not showing me a prompt when I select several lines. However only works for the first row. (even if the menu is started from the second row).

  Multiple lines selected, variable of type members. only works for the first line of the selection. (in 11.1.2.2) You can try to connect an SR and see what Oracle has to say.

  Concerning

  Celvin

  http://www.orahyplabs.com

• Are there script manager code resp. beyond the "cast members"?

  Hello

  Currently, I am working on a big project little documented in the jargon of the Director / without having built myself. So, I am facing a lot of issues and problems.

  (I work with the German edition, so maybe that some of my Director translated English terms are not correct.)

  This time I am facing a very strange behavior of the application. There is a parent script named "PersonalZelle" (personal cell) that has a function named "switchCameraCB". I have not found any call of this function by text search in other scripts. I've tried choosing to search "all members of the distribution" (German: "Alle Besetzungen"). But placing a breakpoint there and debugging, this function is actually used in the currently running application! How can O.o this be?

  So my questions are:

  (1) are there any 'hidden' scripts/code beyond the cast members? If so, how can I find them?

  (2) otherwise, how is it possible to have a function/method used if no code is actually not called it?

  Second example:

  In another script, there is a variable named piVideoNum. This variable is NOT instantiated, and no value it is given in any of the code. But he debugging, there always the correct value that it should have. How can this be? O.o where it takes the value of? As much as I know there is no interface user-part with this fixed variable. In the user interface, you have three videos which you can klick, and if klicked, the correct number of video is recorded in piVideoNum. But in the script attached behavior, there is nothing. The method that handles the klick calls another method and sends the piVideoNum - without having changed before. Perhaps it is also done by some code/script 'hidden '?

  Does anyone have an idea? That would be very helpful!

  I need to change this method, but if I don't know how it works, there is no possibility...

  Well, not exactly.  The beauty of 'ownership' is that each sprite that uses this behavior has it's own, unique value for this property - that is not as a global variable.  So, whenever you click on one of the videos, it will use its own value for this property.  It seems that in your case, they never change, so one of the videos always has a piVideoNum property whose value is set to 1, and another video is configured to use the number 2.  You get the idea.

  They are essentially of three different variables, and you can see it by going to the frame and then typing in the message window:

  put .piVideoNum sprite (1)

  put .piVideoNum sprite (2)

  put .piVideoNum sprite (3)

  (except, of course, use correct sprite numbers), and you will see 3 different values.