Exclude the host and guests of vFoglight

Similar Questions

• How to disable the sharing of files between the host and guest XP PRO?

  Hello my setup is:

  Host of XP PRO and XP PRO comments using NAT.

  How to disable file sharing between the host and guest (do not want to view or access the file share on host comments)?

  In the comments

  I tried to disable simple file sharing in folder options and uninstall

  File sharing and printing of LAN properties but can always see and have access to the

  Organizing actions of folder...

  Help please!

  Then you will need to disable "Microsoft File and Printer sharing" or you need to set restrictions with the GPO. As long as the systems have their default values the value of a Microsoft network allows to use actions.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• Workstation 9 - slow network performance between the host and guest

  I am running windows 8 on the host and installed by 9 trial. Then installed windows 8.1 as a comment system.

  I'm a slow, very slow network between the two.

  If I send files to and from the computer with another guest, transfers are normal, but if I try the same files between the host and the guest, they are really slow.

  I use a bridge connection.

  I read elseware to disable the following on the guest card:

  Large Send Offload v2 (IPv4)

  Large Send Offload v2 (IPv6)

  But that did not help.

  Thoughts?

  Maybe then try Hyper-v, it help you better.

  report this incident to Vmware if you can

  Concerning

• Difficulty ping between the hosts and guests

  Hello

  I want to establish network connectivity between my host OS (XPsp3) and my guests (CentOS5.5 and Windows 7).

  So far, I can ping between guests, but not between host and guest, or comments to the host.  When I try, I get a message "destination host unreachable".

  When I configured my virtual machines in a first time, I put them to 'Host-Only' and I need to keep it like that for the purpose of what I do with them - which is the problem?

  Ipconfig and ifconfig outs of machines attached.

  Bests

  Adam

  ... If you use VMware Workstation, you could also reconfigure VMnet1 in the 192.168. 8.x subnet using the "Virtual Network Editor"

  André

• How to share an IP address between the host and the VM?

  I'm a newbie on VMWare, and I hope that this question has a simple answer... I have a physical machine, I have turned into a VM today and am now running as VM on Workstation 6.5. This physical machine had a static IP address which must remain public, but I can't get a second IP address on the same subnet of the host. How can I get static IP even stay on the virtual machine without attributing an IP address of NIC1 host?

  Or is it possible to assign static IP address to the host NIC1 use somehow fill? That seems still, however, require an IP address on the host and the guest of virtual computer.

  I also looked in NAT, but I do not know how to assign the NAT specifically to NIC1 on the host. I have NIC2 and NIC3 with different IPs on different subnets.

  Thanks in advance.

  drmuzik wrote:

  So with the bridge, the NIC host does not have an IP address?

  Well the exact answer depends on those needs specific and explicit, but assuming that the physical machine will be connected directly to the Internet and the virtual machine uses a static public IP address then the physical machine may not have a public IP address if the only one you have is assigned to the virtual machine.  This is why I said delete everything except Protocolto Bridged from VMware on the physical target network adapter.

  Yet once if you had included the host and Guest OS operating system information it helps us to be more specific with answers to questions and given that you do not I will generalize and do not take the time to explain all the scenarios possible use cases.  In a case like this one containing explicit and specific local network topology details and that it connects to the Internet may also be useful to provide more explicit and specific answers.

  In addition if you have not already read chapters 14 & 15, covering networking, workstation users manual you should as it will help provide toys better understand virtual network infrastructure.

• Can I use an antivirus on each of my hosts and guests at the same time when running a virtual environment on my PC?

  I have Windows 7 running on my main computer at present and that you have a virtual environment installed as an operating system on this computer very.

  I would like to know if I am able to run an internet security on my pc (Windows 7) host program and other internet security on my guest in my virtual environment operating system (pc windows 8)... at the same time.

  I ask this question because... I installed my OS of windows 8 in a virtual environment running inside my Windows 7 OS in order to familiarize yourself with the features of windows 8 and to test the compliance of windows 8 with various hardware components I use... to satisfy my curiosity before I migrate eventually completely to windows 8.

  Part of my tests would involve various software including Internet security applications.

  So the question is... I was able to save my virtual environment with an Internet security program, while having an Internet security program running in the host computer?

  PS my environments hosts and guests are not put networked with the exception of the common external drives and dvd burners. The plan being that the Internet security on my host computer program will have my analysis excluded virtual environment.

  Yes

  The systems are completely separated from each other, will not affect the different AntiVirus on another product.

  If you decide to test another Internet security program don't forget to completely remove the old version on the virtual machine

• Host and guest of the machines on different physical networks

  Hello everyone.  I would wise advice from the forum, about a particular environment, I am trying to set up.

  I have VMware Server 2 installed on my XP laptop, which is connected to a DSL modem via a NIC edge portable said has also a PCMCIA NETWORK card installed in it.

  I would like to take a virtual XP workstation and connect to a modem cable via the PCMCIA NIC for test connection hosts and guests safe through the public internet.  For this exercise, I need two machines to be completely separate and therefore have no way to reach or in interaction with each other anyway, except through the extended link.

  What follows is a list of what I've done so far.  I would like to know if there is anything I missed.  Perhaps more measures must be taken that I'm not aware of.

  Thanks in advance for your collective time.

  (1) disabled all services associated with the PCMCIA NIC on the host computer, including TCP/IP, except the VMware Bridge Protocol.

  2) welded by the mentioned back PCMCIA NIC to VMnet2 via VMware Virtual Network Editor.

  (3) excluded the NETWORK PCMCIA card automatic connection via the virtual network Editor.

  (4) set up the virtual ethernet device of the instance XP comments use the custom VMnet2 network.

  (5) set the property 'NetworkAddress' of the network connection in the case of XP from comments to the MAC address of the PCMCIA NIC by step seven of the next mission - http://communities.vmware.com/message/378576;jsessionid=034FC6E865C0DB28AD269D7445F2AD0D

  PS - How could these measures differ for a guest computer to Linux (openSUSE 11), especially step 5 in my list above?

  Welcome to the forums!

  IMHO, I think you have done all that was required. I don't know why your step 5 is necessary or if it will be same cause problem. "Bridged" means that the customer acts as its own instance on the network, which includes a discreet addresses MAC and IP, from my point of view. Affecting the MAC guest host MAC is not necessary for the connection of standard bridge, so why if it is necessary here? In addition, you can set any MAC address that you like for a VMware guest. There are restrictions, once again setting the host MAC address in the guest can cause problems.

  You can find the VMware documentation on how to do it here: Page 240, http://www.vmware.com/pdf/vmserver2.pdf

  There is also something on definition of MAC addresses: Page 234

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP/vExpert 2009

  Published by AWo

• Windows sharing does not host and guests, but between physical and host computers and the guests.

  Hi, I have a bit of a

  a bizarre with windows shared folders network, I am about to format and rebuild the host, but I figure why not ask you chaps, cos I would lov to see why it does not work.

  So I have a 64-bit Windows XP workstation host 7 but I also uninstalled and tried vm player 3.

  My many comments from winxp ops, vista32 and even a win7 can do all of the windows network shares but cannot share with the host country, they see the host in the "mshome" workgroup and can even ping, but when I try to connect to share on the host I get "host is not reachable. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have permissions.  The specified network name is no longer available. »

  My laptop (win7) and two other physical computers desktop (Windows XP & vista home) can see the host and can use the shared windows resources.

  The host can see the guest in the working group operating systems and I can ping, but once again impossible to use actions.

  I connect to the host, all comments and physical workstations with the same user name and password

  All guests are running in bridge. All firewalls and virus progs are disabled.

  If quick recap

  • You can take and provide each other actions and physical work stations, but not the host

  • The host can take and give shares with physical computers, but not guests

  • Physical computers can give and take action with guests and the host.

  If anyone has an idea about it, I would lov to hear it.

  See you soon

  This sounds like a manifestation of this problem of networking:

  http://communities.VMware.com/message/1409994#1409994

• Cannot drag-and - drop between host and guest

  12 workstation

  Host = 10 Pro x 64 Windows

  Comments = 10 Pro x 64 Windows

  Everything is entirely up to date, etc. on a Z87 PC chipset.

  I can copy and paste. I can drag-and - drop comments to the host.

  I can't drag-and - drop between host and guest! lol I just get that bar circle icon.

  I'm totally stumped! I tried a myriad of common things...uninstalled/reinstalled VMWARE, then Tools, then even tried to create new guests. I do not have eccentric tweaks or customizations. It is a desktop PC that I use for a laboratory test and my business. I have no other problems in addition to this. Yet, on my other system, essentially a nearly identical configuration, I don't have this problem.

  Any suggestions?

  SOLUTION FOUND!

  The problem boils down to a matter of RUN AS ADMIN. On the HOST problem, it has been set to RUN as administrator. I've not done this! He has just installed that way automatically. Once I stopped that and it ran normally, all was well again. Read below for more details.

  I have two virtual HOST machine configurations almost identical - we'll we'll call HOST 1 and HOST 2. HOST 2 works perfectly without a problem. Drag and drop, to navigate to drives mapped to access NAS stored VMs, etc...

  I began to compare what was similar vs. different between the two. On HOST 1 (problem child even as I could slide properly - drop on), I noticed that I could not navigate to my NAS location where some virtual machines are stored. In the left navigation panel, the mapped drives would appear as drive letters with question marks next to them as you can see in the image below.

  

  I deleted the mapped drives then mapped them still fresh, did an other CLEAN uninstall VMWARE WS PRO 12. I combed the registry, records and checked for devices hidden in Device Manager. Clean as a whistle! I reinstalled 12 Workstation and returned the problem! I could yet drag-and - drop properly or navigate to mapped drives. Then I noticed the HOST 2 that he was not being RUN as administrator. Really? So, I removed this parameter and TA DA! Everything started to work properly. I don't know if it's a bug, or knowledge common to others but for me it was new. I don't know why, by default, when installing 1 HOST went down VMWARE to run as administrator, but it was.

  Bottom line - do not run VMWARE as an administrator.

• Stupid question? S/W antivirus on Host and Guest machines?

  Hi people,

  Maybe it's a stupid question and a really easy question to answer, but I have anitvirus software installed on my host machine and my computer invited? (One of each). Or could this posslibly causes some kind of conflict or slow down my whole system accordingly.

  Just to clarify my guest computer resides on the C: drive of my host computer and both are running windows 7.

  Thanks in advance.

  Carlo.

  Any system, physical or virtual, must have security measures in place.   Installing anti-virus on any system, physical or virtual, software affect performance to some extent and do it by running on the host and the compounds of comments however any system that has a network/Internet connectivity is in peril and the host does not necessarily protect comments or vice verse.

• Difference between the hosts and virtual machines

  Happy new year!

  I guess that's a stupid question, but I don't know the answer to it.

  I created pools from VM. Some jobs in the pool are hosts and some virtual machines. What is the difference between the hosts and virtual machines. I thought I could only create virtual machines, but I guess I could create hosts as well. -What happened?

  Thanks for your help.

  where does say desktops are hosts?  A host is usually referring to an ESXi server.  A virtual machine is just the guest OS running on the host computer.  A pool is a group of VMs that can extend over several hosts.

  Gunnar

• Configure the host and the VM on two separate wireless networks

  Hello community, I was a browser for a long time, but this will be my first post.

  I would like to begin by saying that I have always found the answer I was looking for by browsing these forums and that I browsed discussions thereon and consulted the chapters regarding virtual networks in the manual workstation 7.1, but at this stage were still unable to solve my problem.

  The scenario:

  I'm a small business working in a House (upstairs) / hookah lounge (bottom). We recently had a second internet connection (WORK), Internet home of my family (HOME), to provide our customers with a free wi - fi. I would use the connection of WORK (during our hours of downtime) in a Ubuntu VM for folding and seeding of torrents. I want to put this far on a network traffic will not affect the other.

  The network:

  SE host: Windows 7 Pro 64-bit

  (Host) NIC: Intel PRO/Wireless 3945ABG (Mini PCI)

  VM: Ubuntu 10.04 on VMWare Workstation 7.0.0 build-203739

  NIC (VM): Alfa awus036h (USB)

  
  

  The current configuration:

  Network connection is made, the State of replication physical physical network is unchecked.

  The Alfa is connected to the virtual machine and is no longer present on the list of the network adapters in Windows.

  It seems that I have to manually disable the "auto eth 1" interface or the virtual machine using the internet connection in host rather than the network of your choice that the Alfa connects to in VMWorkstation. The speed of the internet with eth auto 1 is connected is quick and consistent, but using it defeats the purpose. Strangely, when I go to network connections, under the "last use" for "eth 1 auto ' it is said 'never '.

  When "eth 1 car" is disconnected, it seems that the virtual machine uses the network wireless connected to the Alfa. But the internet speed is very slow and inconsistent. On downloads, the speed varies considerably; Also, it remains at 0 kb/s for a while before going to 80 KB/s, then works his way down to 0 kb/s again.

  Possible solutions:

  1. it's a driver problem for the Alfa inside the VM environment all this time?

  2 just misunderstood how to set up this kind of virtual network?

  3 is it possible to get the desired configuration by filling the WORK and VMnet0/1/8?

  * Note: Only VMnet1 and VMnet8 appear on the Windows network connections, however isn't VMnet0 bridged one responsible for networking?

  4. upgrade to the current version of the desktop would be useful?

  5. do this problem originally because of some settings on the router?

  * Note: The AP is close enough to provide a signal strength of 85-90%

  Sorry to be so talkative, I just wanted to be as clear as possible because I'm still a beginner to learn more about virtualization.

  Thank you in advance, as always, your help is greatly appreciated.

  First of all, I must say that when I did this last response, I've been on my Mac and I thought the configuration of a host of Windows XP however outside the nomenclature of the names of the host network settings dialog box the rest stands as it is on a host Windows 7 as described below, including a picture as an attachment.

  On a Windows 7 x 64 host with two network adapters, each on a different subnet and VMware Workstation 7.1.3 installed with the editor of virtual computer network configured for VMnet0 and VMnet2 jumpered separately to one of the host of NIC and I have not changed the settings for Windows 7 host NIC-1 and have network/Internet connectivity to the host of this NETWORK adapter as shown in the picture of Google in Internet Explorer on the host computer.  In VMware Workstation 7.1.3 I have a Linux Guest configured to use VMnet2, which is filled in the settings and the Windows 7 host NIC-2 have all with the exception of VMware Bridge Protocol unchecked and have network/Internet connectivity in the guest as indicated by Google in a browser.

  From the perspective of connectivity network between the host and the guest by NIC - 2 on the host computer when all with the exception of VMware Bridge Protocol unchecked there is no connectivity between the two on this subnet because there are no protocol at stake to allow the conversation to take place.

  So theoretically and in practice what I said previously, but didn't were not expressly with a Windows 7 host in mind, nevertheless what I said is true and accurate, as evidenced by world real test/use by what I said and with the image attached herein.

  FWIW Windows 7 has been configured with the default settings and the only changes to the host's network were those made during the installation of VMware Workstation 7.1.3 so with the configuration I discussed with the attached picture, there is no reason why the host and the guest cannot be on different physical networks and each network/Internet connectivity based on the information I have provided and they be isolated from each other by being on separate physical networks.

  That said, even if they can be isolated by being on separate physical networks can still can connectivity between the 2 through VMware shared folders it it turned on and of course & slide and other services so if absolute isolation is necessary to the point where it can be, and the guest still operating system run on a Virtual Machine in the host you would need to disable the Backdoor for VMware Tools cannot provide shared folders on VMware, & glide and other services.  So if you need this isolation level let me know and I will provide additional information to complete it.

• unique IP address does not work properly. with win7 host and guest.

  Hello

  I can use internet equally as good on my host and guest WIN7 using a bridge connection.

  I use a bridge connection.

  My main goal with win7 as a virtual machine is to use the same application online with a different IP address... This is where it falls apart. When I do 'whatsmyip"on the virtual machine and the host. It appears to be the same.

  ipconfig in CMD shows 192.168.1.x1 on the host and 192.168.1.x2 on the comments. but make an ip check online shows that

  96.365.1xx.x on two of them.

  I only got an E-card... but maybe there's a way to fool the router by giving me two single dynamic IP address...

  Thank you for your time!

  Attached is a mental map of the way I'd like it works. (The two runnig Windows 7)

  On the IP addresses should not be the same as those listed below

  

  The problem here is not in VMware Workstation or your host, its your NAT:ed internet connection.

  Your internet provider very probably only you give an IP to get out, if you want more you have to communicate with them.

  Linjo

• Is it posible to allow access between the host and virtal machine without wired network?

  I want to use my laptop to show him that I did in the virtual work to other people at my home.

  However, the laptop is ofen not allowed access to the network in their office.

  Is it posible to allow access between the host and virtal machine without wired network?

  VMware player

  My virtual machine is filled to the physical network adapter and use the static IP address.

  Brad

  Setting of the virtual machine: filled

  Change that to each host only (what Continuum called VMnet1) or NAT (VMnet8).  Both use a separate virtual NETWORK card to connect the physical computer virtual host, independent of any NETWORK adapter on the host.

  ... Since the machine host (win7) could not get IP, ping fail to VM (192.168.1.5)...

  Because the connection between the guest and the host is through a separate NETWORK card, you must use the 'other' IP address.  Access a prompt on the host computer and type IPCONFIG to view the IP address of VMnet1 and VMnet8 NIC.  Then use this IP address instead of 192.168.1.5.

  And when you have changed the network management modes (i.e. of bridged to host-only), Windows does not automatically renew its IP address.  The virtual NETWORK card uses a different subnet if you need to renew your DHCP lease or change your static IP address to work with the new subnet.

• I upgraded from Dreamweaver CS4 to CS6. but now "a Technical error occurred - cannot connect to the host. I spent hours with the technician of the host and we can't find the error. I reinstalled DW4 and it connects to accommodate perfectly. Anyone else se

  I upgraded from Dreamweaver CS4 to CS6. but now when I want to download, I "MFP error - cannot establish a connection to the host. I spent hours with the technician of the host and we can't find the error. I reinstalled DW4 and it connects to accommodate perfectly. Anyone else seen this problem?

  Mac OS 10.8.5

  
  None of these issues are causing the error in DW CS6. We double-checked all of them and we did everything right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Might need to factor 6 which did not exist in the 4? Something that is not in the SiteSetup but in a hidden dialog box?

  I can also download my host using Fetch, a third party FTP. And like I said that DW CS4 works very well. So the problem is not with my host, sound with DW CS6 in particular.

  You are most likely missing something fairly simple (some goofy box cache you in some menus random). The best way to solve this problem, without playing 20 questions...

  1 open the site in DWCS4 and go to Site > Manage Sites > export to create a your site settings .ste file.

  2. close DWCS4 and open DWCS6

  3. go to the Site > Manage Sites > Import to import the .ste file to create a new site at DWCS6

  This will create an exact copy of your CS4 settings in CS6. If it still does not work, let know us and someone should have another idea for you.