Exclude the layer hidden when publishing

Similar Questions

• Radio button Widget hidden when published

  Radio button widget works very well when you preview, but does not appear when published.

  Any ideas?

  What version do you use? What exit: SWF or HTML? How have you tested after publication? If the output is HTML, you must upload to a Web server to verify the actual behavior of learning interactions (I assume you're talking about the now of option buttons, not the old widget).

• Have a layer that is replaced with a group of layers of cycle, while the layer back when finished?

  I read a few other topics concerning situations related to this, but I think that I don't quite get my head around what I do.

  I have a puppet. I created a framework of cycle per layer framework for arms action group and, as it should, he travels the layers in order to breast when triggered with the key that I put.

  I want an arm by default to be visible all the time and then just momentarily get replaced when the trigger is active. How do I configure that?

  I worked on it.

  For reference, I had to hide the layer group to cycle along the side of the default arm and check the brothers and sisters to hide when it is active.

• Lose the layer effects when I flatten image Photoshop CC

  How can I keep my layer effects when I flatten an image or the merger of the layers?  I tried a few ways to merge: for example merge down to an empty layer, visible merger, stamping the image, the rasterization of the layers, saving in jpg format, but still lose the effect.  I can also send it to a lab to be printed with all layers intact, as it is more than 1 GB in size. I searched the net for an answer, but all suggested does not work.  Help, please.  I really need to solve this problem.  Thank you

  It seems to me that you apply tonal corrections of black and white line art, or an image with the frame of halftone (points) (or something similar).

  That won't do anything because all you have is still pure black white and pure - but it will look as it does If you look at what it is other than 100%.

  
  

  The reason why the adjustment seems to take, is that you look at a preview resampled, cached, and resampling softens the edges and introduced middle gray values.

  When you group, the adjustment is calculated on the original size. Then he "disappears", because it is actually nothing to resolve.

  I could be wrong and it's something else - but is a very common question and a good bet.

• Troubleshooting: animation will not preview in the browser or when published

  I created a number of edge successfully Animation files, but I encountered a problem with a file that will not play when published or when you use the "Preview in browser". It is visible at the start but not auto play. Tips to solve this problem? Using Firefox 21.0 FWIW.

  Chris

  Found the answer to my question: http://www.adobekb.com/inserting_edge_content.html

  The box "autoplay" in the step properties tab was not verified.

• Keep the layer names when describing the text

  I would like to know if there is a way to keep the names of the objects/layers of text when the text is converted to text outline, using scripts.

  I create files with dozens of text layers (player names on the back of the jerseys of sport) and send the .ai file to manufacturers. This means that I have to expose the text, but when I do, the layers all lose their names and everything becomes "< Group >.

  Can anyone think of a way of naming these layers with the text they contain?

  Hi openbracket,.

  It is impossible, if the text is underlined.

  But it is possible for the text and the outline of the text via script (don't forget that the selected text is only filled with no effects or stroke)

  You can try something like this:

  // required: an opened document with one selected text frame
  var aDoc = app.activeDocument;
  var aSel = aDoc.selection;
  if (aSel[0].typename =="TextFrame") {
      if (aSel[0].characters.length < 40) {
      var newName = aSel[0].contents;
      } else {
      newName = aSel[0].contents.substr(0, 39);
      }
  aSel[0].createOutline();
  aSel = aDoc.selection;
  // name of the new Group = contents or part of contents of selected text frame
  aSel[0].name = newName;
  }
  

  Have fun

• Project start is not on the first slide when published and presented in preview (CP7)

  I have a problem in some of the projects where she will start on the second slide when released instead of the first slide. What are some settings I check to fix this?

  In my experience, it is never a good idea to place anything on the first slide of the movie because sometimes these things get skipped.  Always start the elements of the screen on the second slide.  Keep the first blank slide and make lasting 2-3 seconds.  In this way, preload may attempt to ensure that all the bits necessary to start the 2 slide are aboard, before its opening.

  Another question, can you do to avoid problems at the start time is NOT placing a video heavy of introduction on the first two slides.  It's just ASKING for trouble.

• How to specify the initial image when publishing swf

  I use Flash CS6 on a Mac, by creating banners web marketing on different websites of publication through a "clickTAG" button. When I publish my swf and a set of control and test html file, how choose the frame displayed before picture animation series? It usually displays a clumsy moment of a motion tween or an interpolation alpha until a mouse click starts the animation, then it shows the complete animation to the starting point. I would like the ability to choose the framework that is displayed in the waiting for a click.

  The link to Bass Player magazine show a leaderboard banner size full Compass just below the header, with a motion tween to a standstill at rest. I would like to show everything on stage as if it were a static file.

  It's a straight line to auto power off. Open your palette of code snippets and use it. Place it in its own layer called (Action Script) on top.

• Menu is wrong color and the text unformatted when published?

  I can get an overview of the build in Muse and it looks fine, but when I publish, the looks of dark menu (bad color) and the text is the wrong size and color. Here is a picture in the preview in the Muse... http://i.imgur.com/3JMaiA7.PNG and here is the site... http://botticelliportraits.com/

  I publish direct from Muse to Business Catalyst. I tried to download all the files. I went even manually and remove the entire site and reissued, but I get the same result. Any help is greatly appreciated!

  Brian

  Hello

  Please refer to a similar thread and follow the suggestion of Zak.

  Re: New version of Muse certainly screwed things up.

  Kind regards

  Vivek

• Why I'm losing the layer effects when recording in format PDF, JPEG, etc...?

  I'm working on a poster for a school assignment in Photoshop that uses a lot of layer effects for multiple objects, including text. I'll have to save to print to PDF for my teacher, but when I do that I lose a lot of quality and some of my layer effects. I tried to save as JPEG and PNG, but they all do the same thing. I also noticed that I lose the effects when I flatten the layers that the effects are on. I need the effects because I'm giving some objects a metallic appearance. It seems that the effects that I lose are the glow inside and bevel and Emboss.

  Is there something I am doing wrong? It has nothing to do with the compression? Can someone help me understand what goes wrong so that I can save for printing?

  If it was me I would be recording in the format .psd until the end of the project and then saving it to pdf or jpg that these formats are not intended as alternatives to .psd.

  Jpg files don't support layers you will always lose them if you save in this format. PDF, however, should be ok, if configure you it correctly. When you save as pdf, make sure the layers box is checked

  

  Make sure that in the next dialog box his game up like this

  

  and finally click on compression then a lossless like zip compression. It should look like this

  

  Hope that gives you better results

  Terri

• FF do not pick up the external CSS when published.

  If I view the page in IE, FF or opera locally everything appears as expected. I published the page and in IE and Opera, all seems good. But FF is not using CSS. It seems that the CSS file is not present, but it is...
  
  Totally confused...
  
  http://epchs.k12.il.us/demo/index.htm

  You guys are great, thank you 1 million

  If interested I publish a Novell server 5.X running the engine of Netscape Fasttrack Web. And the link Osgood provided lead me to the solution... as explained here...

  Changing types MIME on iPlanet/Sun Web Server
  Problem

  Users are presented with a save dialog box under the value application/x-pointplus content type or the content of the CSS file is displayed as text in the browser when a page contains a file of Style sheets cascading with the extension .css file.

  Solution

  The .css file type is not mapped to cascading style sheets in included with Enterprise Server default mime types. You can change the map on the page of global MIME Types.

  To access this page, the administrator of the server, choose Preferences from the server, the MIME Types and set the MIME type for .css to text/css instead of application/x-pointplus.

  If the problem persists, turn off keep-alive by adding "KeepAliveTimeout 0" to magnus.conf

• What are the best settings when publishing on Facebook through Lightroom?

  Can you please tell me the appropriate file settings, size the picture anyone and output sharpening when you are using the release of Lightroom to Facebook Manager?

  There is no 'best' or 'good', everything depends on what you want.

  Under sizing of the Image, I think that you want to set the long edge to 2048 pixels or less (I don't think that Facebook accepts larger images). Sharpening is a personal decision, try several different settings and see which suits you best.

• How can I turn off layers jump to the top of the layer panel when I re - order my layers?

  I've just updated to 2015 CC Photoshop this morning and now whenever I move a layer upward or down the entire jury jumps to place my selected top layer. It drives me crazy. Anyone know how I can disable this option?

  This is a bug. It was a side effect, unfortunate and unintentional to another change. He is being investigated right now.

• Bad Table of contents appears in the help file when published

  I have four on my Web server help files. When I try to access these files help, good welcome page appears, but the Table of contents that appears in the help file is the Table of contents of an another help file. My other help files work fine. Anyone who has ever met a similar problem and how to solve? It acts as the projects were merged, even if I never said to RoboHelp to do.

  Had to remove all of the help files on the Web server and republish. This seemed to fix the problem.

• Layout file lock error when publishing.

  Hello Experts,

  I am getting error on the destination server when published below: -.

  [2015-06-13 00:04:31, MYT 003] [ERROR] [pool-13-thread-1] file locking [fatwire.logging.cs.filelock] Unexpected failure

  1. Com FutureTense.Util.NioFileLock$ NioFileLockException: failure low level construction in FileLock RandomAccessFile constructor. It has been attempted in total 400 times, wait 25 between two attempts. [File: opt/oracle/Sharedv2/clustersync/genIDLockFile.ftlock]

  to com FutureTense.Util.NioFileLock$ LockFile.constructRandomAccessFile (NioFileLock.java:339)

  to com FutureTense.Util.NioFileLock$ LockFile. < init > (NioFileLock.java:272)

  to com FutureTense.Util.NioFileLock$ LockFile. < init > (NioFileLock.java:245)

  to com FutureTense.Util.NioFileLock._lockFile(NioFileLock.java:64)

  to com FutureTense.Util.NioFileLock.lockFile(NioFileLock.java:33)

  to com FutureTense.Util.ftFileLock.lockFileName(ftFileLock.java:91)

  at COM.FutureTense.Common.SysIdGen._lockID (SysIdGen.java:233)

  at COM.FutureTense.Common.SysIdGen._allocate_logic (SysIdGen.java:256)

  to COM.FutureTense.Common.SysIdGen.access$ 300 (SysIdGen.java:32)

  to COM.FutureTense.Common.SysIdGen$ AllocateRange$ 1.execute(SysIdGen.java:344)

  at com.fatwire.cs.core.db.NestedTransactionBlock.execute(NestedTransactionBlock.java:189)

  to COM.FutureTense.Common.SysIdGen$ AllocateRange.call (SysIdGen.java:347)

  to COM.FutureTense.Common.SysIdGen$ AllocateRange.call (SysIdGen.java:326)

  to java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)

  at java.util.concurrent.FutureTask.run(FutureTask.java:138)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)

  at java.lang.Thread.run(Thread.java:662)

  Due to: java.io.FileNotFoundException: /opt/oracle/Sharedv2/clustersync/genIDLockFile.ftlock (Permission denied)

  at java.io.RandomAccessFile.open (Native Method)

  in java.io.RandomAccessFile. < init > (RandomAccessFile.java:216)

  to com FutureTense.Util.NioFileLock$ LockFile.constructRandomAccessFile (NioFileLock.java:312)

  ... more than 17

  
  

  Can any body tell me what could be the reason for this.

  
  

  
  

  Kind regards

  NJ
  

  Hello NJ,.

  It looks like the file /opt/oracle/Sharedv2/clustersync/genIDLockFile.ftlock or possibly the directory/opt/oracle/Sharedv2/clustersync / is not writeable by the appserver.

  Kind regards

  Stephan.