Layout file lock error when publishing.

Similar Questions

• Reviews for .dll file loading error when starting the laptop

  After removing an infection from malware Thinkpoint of my laptop and reconstituted at almost normal speed, a notice of a .dll file loading error appears while booting.  What are the options to eliminate that?

  This isn't a lot of information to go, but it's because forums MS Answers does not prompt for information, when a new question is asked.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Read this and see if it looks like your question and if it is not, let us know exactly what you see and we will always fix it:

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Fatal error when publishing content

  Nice day

  We recently purchased 9 Captivate and installed. However, when creating content as well as its publication, we get a "fatal error has occurred and the application is completed. Captivate then closes automatically.

  I publish SCORM 1.2.

  Please help in this regard.

  Thank you

  Gary

  HI RodWard

  After you have reinstalled Adobe Captivate 9, I changed folder locations by default:

  Publish on: C:\Users\gbianchi. METMOM\Documents\My Adobe Captivate projects

  Cache of the project: C:\Users\gbianchi. METMOM\Documents\Adobe Captivate projects cached

  TO:

  Publish At:C:\Users\gbianchi\Desktop\testing for upgrade of lms

  Cache: C:\Users\gbianchi\Desktop\testing project for the upgrade of lms

  He then published successfully.

  I see that the. is not in the path.

  Thank you before and advises.

  Concerning

  Gary

• File upload error when you go to APEX_APPLICATION_TEMP_FILES

  We use the APEX 5.0.0.00.31 on a 12 c database.

  I'm creating new features for my app to load the text file into a table.  I created the new pages to help create a Page - loading data.  On the data page loading there is an element created under 'Load of Data Source' called Pxxx_File_name the storage Type is created in the form «Table WWV_FLOW_FILES» [obsolete]  When I leave the storage Type in the table WWV_FLOW_FILES [obsolete] everything works as expected.

  I did a search on Table WWV_FLOW_FILES [obsolete] and found that we now use Table APEX_APPLICATION_TEMP_FILES, so I changed it.  Now when I select the file I need to download and press the next button, I get the following errors in the Debug View:

  

  Is there something different, that I should do when using the module of data loading in APEX 5.0?  Or is it possible when we upgraded to 5.0 that all do not have upgraded correctly?

  Thanks in advance for any help.

  Tillie

  Thanks Pierre / Tillie.

  Indeed the data transfer always uses the deprecated view wwv_flow_files and will be fixed. I filed a Bug 21478903 - loading still using deprecated data see wwv_flow_files.

  Kind regards

  Patrick

• 2 + GB in plsql zip file. Error when using as_zip

  I use as_zip package of Anton Scheffer http://technology.amis.nl/wp-content/uploads/images/as_zip.txt
  

  When you try to compress a 2 + GB file I get the following error

  ORA-06502: PL/SQL: digital error or value

  ORA-06512: at "SYS." UTL_RAW', line 380

  ORA-06512: at "SANJEEV.AS_ZIP", line 321

  ORA-06512: at "SANJEEV.AS_ZIP", line 356

  ORA-06512: at line 4 level

  06502 00000 - "PL/SQL: digital error or the value of %s.

  * Cause:

  * Action:

  The error is triggered by the little_endian function.

  function little_endian)

  p_big number

  , p_bytes in pls_integer: = 4

  )

  Return to raw

  is

  Start

  return utl_raw.substr

  (utl_raw.cast_from_binary_integer (p_big

  utl_raw.little_endian

  )

  1

  p_bytes

  );

  end;

  The function uses utl_raw.cast_from_binary_integer. I tried to use utl_raw.cast_from_number, but did not create the correct zip file. Does anyone has found a fix for this error? The package works fine for smaller files - many thanks to Anton.

  If you change the little_endian function in the package of files with a length between 2 and 4 GB you can zip

  function little_endian (p_big number, p_bytes pls_integer: = 4)

  Return to raw

  is

  number of t_big: = p_big;

  Start

  If t_big > 2147483647

  then

  t_big: = t_big - 4294967296;

  end if;

  Return utl_raw.substr (utl_raw.cast_from_binary_integer (t_big, utl_raw.little_endian), 1, p_bytes);

  end;

  And if you change your blog2num you can read them again

  function blob2num (blob, aureliepally, of p_pos p_blob)

  Return number

  is

  number of RV;

  Start

  RV: = utl_raw.cast_to_binary_integer (dbms_lob.substr (p_blob, aureliepally, p_pos), utl_raw.little_endian);

  If rv<>

  then

  RV: = VR + 4294967296;

  end if;

  Return rv;

  end;

  Compress a file of this size will take time, on my database 11XE 15 minutes.

  Also, I just saw that this zip/unzip code is included in the ea APEX 5.0 version, named wwv_flow_zip

• Error when publishing to the catalyst for business?

  My site has been the publication very well until I added in a version of phone from the site. I get the following error message when you try to publish to a catalyst for business at 99% complete (the site is not currently hosted yet). Y at - it something I am doing wrong?

  http://rashmiandrew.BusinessCatalyst.com/

  

  Hi Rashmi,

  The problem seems to be the site of BC. I suggest you try to publish to a new site and see how it goes.

  Kind regards

  Aish

• Manifest file not created when publishing...

  I'm trying to publish my Captivate class with the value in the form of files zipped release. I did the course SCORM compliant as far as I can tell, but when I publish the course, there is no Manfiest file so the course doesn't work on our LMS. Anyone know why there is no manifest file? I checked the Zip files and HTML export in the form of publishing... and continues to publish just two .swf files and no imsmanifest.xml file

  I just upgraded to Captivate 3, but it seems that my problem is solved.

  I ended up updating all Adobe products on my computer and all of a sudden, all the right files are published! So I guess updates fixed this. Thanks for your help!

• NSIS error - "temporary file write error" when you try to uninstall FireFox

  Hello! I tried to uninstall firefox, but my computer showed the message "error writing to temporary file.  Make sure your temp folder is valid. "How to fix the error? It's an NSIS error.

  Try the automated Microsoft FixIt to remove Firefox.
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  If this does not help, then search for removal of software 3rd party tools.

  Thank you!

• Cannot access files locked with access TrueSuite Manager

  I have files with Access Manager TrueSuite locked. My Windows bug and now I cannot access these files locked.
  When you try to unlock, I get the error and I can not read these documents.

  Thank you.
  Excuse my bad English.

  I found this document:

  Useful information about the file protection with AuthenTec fingerprint software
  http://APS2.toshiba-tro.de/KB0/TSB9C02RC0001R01.htm

  Eventually, you will not be able to unprotect the files again
  But try this backup data to the external HARD drive or somewhere else.
  Then reinstall this software and import data from external source.
  Then try to unlock this new

• Flash file works great as a .swf on desktop but falls when published as a .apk

  My flash file works great as a SWF on the desktop but falls when published as an apk. When I run the application, the start menu appears as it should, but the Start button does not work. The trouble is that credits button works fine... «I also won an error warning that says: "" warning: library path "$(AppConfig) / ActionScript 3.0/libs/11.0/textLayout.swc" is not resolved to a valid file.» " Told me that maybe I had not clicked on"merged into code"but after trying it, it doesn't seem to change anything. Anyone have any ideas?

  Here are the files that I use.

  QuipQuiz for Android.apk - Google Drive

  QuipQuiz for Android.swf - Google Drive

  ActiveQuizCS4.fla - Google Drive

  Any help anyone can offer would be greatly appreciated.

  Note: just realized that I am also a separate warning on the publication that says: "Warning: Application has not specified its requirements for authorization in application.xml"

  I just had this problem with an older file created in Flash. If you go to file > settings ActionScript... Animate will open the Advanced ActionScript 3.0 settings dialog box. Below the initial settings, you will see 3 tabs: Source path, library path and Config constants. Click the library path. He'll show CFCS and ANE files or folders. Select each line, and click the sign - off. When I published again, I don't have the error.

• Publish on YouTube: "error when downloading the video.

  I can't post a video on YouTube. When I try to publish the project, video editor is capable of producing the video and then I see the progress bar for the download of YouTube, but then invariably I get an error that reads "error encountered during the download of video.

  

  Running Adobe Captivate 5.5 on Windows 7, 60 Mbs cable internet connection. I have no problem with the network, the internet connection is fine.

  I tried to go in the Adobe Captivate AppData folder under my user name and trashing the Captivate 5.5 folder, reset all my preferences. I get this error pretty regularly, and it worked in the past. But not for this video. It's not too large - 22 slides, 4 minutes in length, 4 MB of files. I tried to create a new project and copy and paste the slides from the original, but I still get the error. I have tried to install Captivate 5.5 on a virtual machine Windows 7 newly installed (and updated), copy the file to him and publish from there - same error.

  I was able to work around this problem in the past of trashing the file I mentioned above - is embarrassing enough because I have to configure everything again. But at least it worked. Now I'm stuck.

  I tried to call tech support on this issue, and they advised me to try to screw up the folder.  But beyond that, they had all the ideas.

  Anyone has any ideas what to do?  Anyone else has this problem by publishing on YouTube?

  Jason

  As an experiment, try to change your title for something that contains only letters (no punctuation or hyphens), does not begin with a number and has underscores instead of spaces.

  See if you are able to then publish correctly.

• An error occurred updating the provisions of the article. The InDesign for page layout file can not be...

  When you try to complete the tutorial for indesign, I get the following error when you try to add an article to my folio:

  "An error occurred while updating the provisions of the article. The InDesign for page layout file is not found. »

  I am able to create the folio then I click into articles. My 'WiFi_v.indd' document is opened by clicking Add article, but I get this error message.

  I use the following versions of the software (should be later).

  -Folio Builder (downloaded version Version 1.1.8.0)

  reported version:

  11.4.3.20111129_m672305 7.5.5.17

  Adobe Design 7.5.2 CS 5.5

  Also tried to reinstall the plugins (uninstall and install)

  Ok.

  Sometimes I have some problems with the mounted network volumes.

  When dismantling and then it works again.

  Try dismantling of unnecessary volume and try again.

  Or try local labour and unmount all volumes of network.

  We hope that you will get to work.

  BR

  Henrik

• Error when creating connections of system files

  I am currently trying UI lapoursuitedes with ADF faces.
  
  I have encounter this error when I try to create a connection to file system to a JAR file that I was sent successfully, but when I try to test the connection I got this msg: the path of the specified file system is a directory. Basic path=[C:\Infrastructure\UIResources\deploy\adflibUIResources1.jar] solved path=[C:\Infrastructure\UIResources\deploy\adflibUIResources1.jar]. This indicates succeeded my link with the jar file that I created earlier. The directory of the path here is exactly the same, as I deloyed.
  
  Please help me
  
  Thank you
  Shirleen
  
  Published by: Shirleen on July 16, 2009 10:59

  Shirleen salvation,

  You must give only until the directory path, does not include the file. Try Don 'C:\Infrastructure\UIResources\deploy' for the path of the directory, once the connection is created, you should be able to see the jar under the connection.

  Jean Lou

• Error when importing complete file with many newspapers

  Hello

  I came across an error when you try to import an entire folder containing 118 newspapers (total size 63 MB), created by and imported to Signal Express 2012 (version 6.0.0).

  After about 80 of them have been imported without any problem, error, indicated in the attached file, see.

  The journal other files can be opened one by one after will have been delivered to market there is apparently no problem with files.

  My path to the folder that contains the log files are 81 characters long. I also tried a shortest path with only 9 characters, but it did not help.

  Looks like it's a bug in SE. Is there a solution?

  Concerning

  Jocke

  It turned out to be a bug in SigX2012. SigX opened the TDMS file handle but could not close during the import. So when a loading 118 connects at some point, SigX reached the memory limit.

  As for SigX2012, we have a solution for you. Newspapers, by half and each folder contains 59 newspapers. Launch SigX and import logs folder, and then save the recording project and exit SigX. SigX to restart and load the project you just save and import the other journal folder. Let me know if it works on your side.

  Once again, thank you for reporting the bug to us.

• Error: "there was a disk error when you write to the file C\:Program files (x 86) \microsoft games\dungeon siege\resources\objects.dsres" during the installation of Dungeon Siege.

  When I try to install it it comes up with an error about 16% in the installation, saying that there is a disk error when you write to the file C\:Program files (x 86) \microsoft games\dungeon siege\resources\objects.dsres

  Any ideas?

  Hi MouseToe,

  What version of Dungeon Siege you trying to install?

  The cause of this problem could be the corrupted resource (.dsres) file or disk error. Here are some things you can do to solve the problem.

  Method 1: Run the disk check.

   

  Check the integrity of your hard disk for lost clusters and errors.

  To do this, follow the steps in this article: check a drive for errors

  Method 2: Defragment the hard disk.

  This improves the performance of your hard drive.

  Reference: improve performance by defragmenting your hard drive

  Method 3: Run the game as administrator.

  Here's how:

  (a) right click on the game configuration file.

  (b) choose 'Run as administrator'.

  Method 4: Try to install the game in a different folder or to a different drive

   

  Try to install the game in a different folder. If the computer has another hard disk, try to install the game on the other hard drive.

  Follow these steps.

  a. Insert the game disc in the drive.

  Note: Do not click on Quick Installation during installation.

  b. follow the setting menus until you see the change button.

  c. click change.

  d. in the path box, delete the existing path, and then type the following text:

  drive: \Program Files\Microsoftgame name Games\

  In this example,drive is the letter of the hard disk drive and the name of the game is the name of the game you are trying to install.

  e. click OK when finished.

  f. follow the instructions that appear on the screen to install the game.

  This should be it.

  For more information, please visit:

  http://support.Microsoft.com/dungeonsiegeiifaq

  For additional assistance, please post your concerns at the forum below.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.