Exicuting "xmlelement" in the query SQL of BI Publisher

Similar Questions

• The query sql without prescription by will return same result on several tracks?

  Hello
  
  I have a sql without a prescription and I limit the number of rows to 100 max per rownum < 100. Now the question is, if the data set on which this sql is running, does not change, the sql returns the same result the performance of several?
  
  For example, there are 150 lines and the sql returns 100 rows because of rownum < 100. Now running the same sql several times, I have the same set of 100 lines? or it could be 150? On the basis of these the kind of database engine and return data when no order by clause are provided?
  
  Thank you for your time.
  
  -Hozy

  Hi, Hozy,

  Hozy says:
  Hello

  I have a sql without a prescription and I limit the number of rows to 100 max per rownum< 100.="" now="" the="" question="" is,="" if="" the="" data="" set="" on="" which="" this="" sql="" runs,="" does="" not="" change,="" will="" the="" sql="" return="" the="" same="" result="" set="" on="" multiple="">

  N ° if there is no ORDER BY clause, then there is no guarantee that the order will remain the same. If the table is small, the output will probably be the same thing, but you can't count on it.
  I guess that you do not have a CONNECT BY query. CONNECT BY queries without ORDER BY clause or brothers and SŒURS of ORDER BY, the output is partially ordered.

  For example, there are 150 lines and the sql returns 100 rows due to rownum< 100.="" now="" on="" executing="" the="" same="" sql="" multiple="" times,="" will="" i="" get="" the="" same="" set="" of="" 100="" rows?="" or="" it="" could="" be="" any="" of="" the="" 150?="" on="" what="" bases="" these="" the="" database="" engine="" sort="" and="" return="" data="" when="" no="" order="" by="" clause="" is="">

  No, you necessarily will not get the same 100 lines each time. ROWNUM reflects the order in which the establishment has recovered the lines.
  Say you run the query at 11:00. Maybe do you a full table scan to obtain the data on the drive, and the order of the lines is determined by how it data happens to be on the disk. As the data is read from the disk, it is cached in memory.
  Say you run the same exact query at 12:00, without changing the table. Instead of retrieve all data from the disk, Oracle will try to use the blocks that are cached in memory, which is not necessarily the way the blocks are stored on the disk. If some of the older blocks 11:00 to 12:00 (otherwise said, some, but not all, blocks are more in memory because memory was required for other purposes), then the items picked up at 11:00 can be recovered first at 12:00 and the lines that I have high ROWNUMs at 11:00 can get low ROWNUMs at 12:00. (See Matthew 7:30.)

  Again, you would never notice it on a small table. You can run this query

  SELECT  ename
  FROM    scott.emp
  WHERE   ROWNUM  < 10;
  

  a thousand times and get the same results every time. You will get the same results the 1001eme time? Probably, but not necessarily.

  If you want the output to be in a particular order, to use an ORDER BY clause in the main query.
  If you want ROWNUM to reflect a particular order, use a subquery with an ORDER BY clause and ROWNUM reference in the main query.

• write the query sql for the following situation?

  We have a table like format following...
  
  A AND B
  ...................
  10 30
  50 40
  60 80
  90 100
  
  
  so to write the query and get the result like formats following...
  
  
  RESULT
  ............
  30
  50
  80
  100
  
  
  Try this... He's one of the interview question. I can't write the query...
  
  
  If a knowledge write the query...

  Hello
  Try this

  select (case when a>b then a else b end)   "Result"  from ;
  

• How to build the query SQL for indexes work based on data - dict.?

  Hello
  
  I want to build the index 'create' - statement to all indexes have worked-based on the data dictionary.
  
  For example:
  create indexes tab1.ind1
  on tab1 (lower (col3), lower (col1), col2, col4)
  Tablespace "index."
  
  I know I'll find all needed information views all_indexes, all_ind_columns and all_ind_expressions. During the generation of the create statement for the index of the order of the indexed columns must be correct (the order of the indexed column can be achieved using the "position_colonne" column of seen all_ind_columns and all_ind_expressions). But what would be the best way to provide all the necessary information in the right order?
  One way would be a PLSQL procedure that puts it all together - but is it possible to use a single SQL statement?
  
  Any help will be appreciated.
  
  Rgds
  JH

  You can try using DBMS_METADATA. GET_DDL:

  SQL> show user;
  USER is "TEST"
  SQL> drop table t;
  
  Table dropped.
  
  SQL> create table t(x varchar2(10));
  
  Table created.
  
  SQL> create index i on t(upper(x));
  
  Index created.
  
  SQL> select dbms_metadata.get_ddl('INDEX','I','TEST') from dual;
  
  DBMS_METADATA.GET_DDL('INDEX','I','TEST')
  --------------------------------------------------------------------------------
  
    CREATE INDEX "TEST"."I" ON "TEST"."T" (UPPER("X"))
    PCTFREE 10 INITRANS 2 MAXTRANS 255
    STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
    TABLESPACE "USERS"
  

• Error exporting Oracle on the QUERY parameter

  Hi all
  
  I would like to ask for help.
  
  This is my environment:
  OS: Linux 5.4 32-bit
  DB: Oracle 10.2.0.4
  
  Here's what I would do:
  Export the selected lines of SH. Table SALES using the query:
  
  SQL > select * from sh.sales
  where to_date(time_id,'DD-MON-RR:HH24:MI:SS') = to_date('28-DEC-01:00:00:00','DD-MON-RR:HH24:MI:SS');
  
  My parfile is:
  
  UserID = ' oracle/sys as sysdba'
  buffer = 10000000
  file = mysales148.dmp
  Journal = mysales148.log
  TABLES is sh. MySales
  Query = "(où to_date(time_id,\'DD\-MON\-RR:HH24:MI:SS\')=\to_date(\'28\-DEC\-01:00:00:00\',\'DD\-MON\-RR:HH24:MI:SS\')" "
  RecordLength = 65535
  Statistics = none
  
  
  When I run the script, I get this error:
  
  [oracle@shaoran selective_export] $ exp parfile = exp_mysale.par
  
  Export: Release 10.2.0.1.0 - Production the game 3 Feb 16:57:08 2011
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  
  Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
  With partitioning, OLAP and Data Mining options
  Export in US7ASCII and AL16UTF16 NCHAR character set
  Server uses WE8ISO8859P1 (possible character set conversion) character set
  
  About to export specified tables by conventional means...
  Current user has changed to SH
  . . MYSALES table export
  EXP-00056: ORACLE 911 error encountered
  ORA-00911: invalid character
  Export completed successfully with warnings.
  
  
  Hope to hear from you soon.
  
  Thank you very much!

  First of all,

  export NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
  

  It is probably the cause of your problem if you have unusual characters in your data.

  If this isn't the case, you do not have these "------" in your QUERY. Since you're using parfile, just go with what you would do in sqlplus:

  query="where time_id=to_date('28-DEC-01:00:00:00','DD-MON-RR:HH24:MI:SS')"
  

• Error message when I run delete the query in SQL Server 2008.

  Error message when I run delete the query in SQL Server 2008 SP3.

  Error message:

  MSG 0, level 11, State 0, line 0
  A serious error occurred on the current command.  The results, if any, should be discarded.

  I never got any problem since 5 years.

  Please let me know what is the cause of the problem.

  You can get a response better/faster if repost you your question in the instances of SQL Server dedicated from Microsoft here:

  http://social.technet.microsoft.com/Forums/en-us/category/sqlserver .

  Thank you.   :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• Window of the query editor with Microsoft SQL Server Management Studio DO NOT scroll

  In my view, that it is a question more of a Microsoft SQL Server Management Studio number... apologies if you think I might be in the wrong place of Windows...

  When you work in Microsoft SQL Server Management Studio, my cursor is common in my part of the query editor window. When I try using my scroll wheel it to review some SQL code, instead the scroll on my mouse wheel is controlling the pane objects in the Solution Explorer window and NOT the glass query editor.
  Some of our partners appear to be well with their ability to scroll using the mouse scroll wheel while others seem to be in the same boat I am, and nobody here seems to know why it is.
  I hope for some comments and I am hopeful for an answer. Thanks in advance.
  PSULionRP

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/Gu-in/sqldatawarehousing/threads

  Hope this information helps.

• Tuning for sql join key table no consumer of the heavy use of the query processor

  Obligation comes to tunne prod of the query in
  

  high use of the query processor

  sql_id: fp79wb32h7a6t

  Module: AHC, P_PatientDQ()

  Cost: 7

  Elapsed time: hung

  Status: Hung, 35,253,460 day at 30 minute intervals

  -Create table

  create table ahc. PATIENTVISITS

  (

  ahcid NUMBER,

  visitId NUMBER,

  visitstatus NVARCHAR2 (100),

  visitdate DATE,

  visitintime DATE,

  visitouttime DATE

  )

  -Create/recreate the index

  create indexes ahc. F1_PATIENTVISIT_AHCID on ahc. PATIENTVISITS (AHCID, VISITID);

  create indexes ahc. VISITDATE_IDX on ahc. PATIENTVISITS (TRUNC (VISITDATE));

  First total number of table

  Select count (1) of

  Pvs AHC.patientvisits

  -Save County 1387485

  create table ahc. PATIENTDEPENDENTVISITS

  (

  ahcid NUMBER (19) not null,

  IDPack NUMBER (10) not null,

  visitId NUMBER (19) not null,

  dependentvisitid NUMBER (19) not null,

  isdiabetic NUMBER (2)

  )

  -Create/recreate the index

  create indexes ahc. K1_PATIENTDEPENDENT_AHCID on ahc. PATIENTDEPENDENTVISITS (AHCID);

  Total number of second table

  Select count (1) of

  AHC.patientdependentvisits POS

  -Save County 774599

  Original request:

  SELECT count (*)

  ACH. PVS PATIENTVISITS

  WHERE PVS. VISITID IN (SELECT POS. DEPENDENTVISITID

  ACH. PATIENTDEPENDENTVISITS POS

  WHERE POS. AHCID = 37

  AND POS. VISITID = 218

  AND POS. ISDIABETIC = 0)

  AND SUPERIOR (PVS. VISITSTATUS) = 'PENDING'

  AND PVS. AHCID = 37

  Count (1)

  -----------

  1

  PL/sql Developer explain plan for the original query

  Owner of description Objects_name cost cardin bytes cpucost cost of e/s

  SELECT STATEMENT, GOAL = ALL_ROWS			7	1	41	63669	7
  AGGREGATION OF TRI				1	41
  SEMI OF THE NESTED LOOPS			7	1	41	63669	7
  TABLE ACCESS BY INDEX ROWID	AHC	PATIENTVISITS	4	1	25	33295	4
  INDEX RANGE SCAN	AHC	F1_PATIENTVISIT_AHCID	3	9		23164	3
  TABLE ACCESS BY INDEX ROWID	AHC	PATIENTDEPENDENTVISITS	3	1	16	30375	3
  INDEX RANGE SCAN	AHC	K1_PATIENTDEPENDENT_AHCID	2	14		18093	2

  After editing the query

  SELECT / * + FIRST_ROWS * / COUNT (1)

  ACH. PVS PATIENTVISITS

  JOIN THE AHC. PATIENTDEPENDENTVISITS POS ON PVS. VISITID = POS. DEPENDENTVISITID

  WHERE PVS. AHCID = POS. AHCID

  AND POS. AHCID = 37

  AND POS. VISITID = 218

  AND POS. ISDIABETIC = 0

  AND SUPERIOR (PVS. VISITSTATUS) = 'PENDING'

  Count (1)

  -----------

  1

  PL/sql Developer explain plan for change request

  Owner of description Objects_name cost cardin bytes cpucost cost of e/s

  SELECT STATEMENT, TARGET = TIP: FIRST_ROWS			7	1	41	59257	7
  AGGREGATION OF TRI				1	41
  NESTED LOOPS
  NESTED LOOPS			7	1	41	59257	7
  TABLE ACCESS BY INDEX ROWID	AHC	PATIENTDEPENDENTVISITS	4	1	16	36646	4
  INDEX RANGE SCAN	AHC	K1_PATIENTDEPENDENT_AHCID	3	14		24364	3
  INDEX RANGE SCAN	AHC	F1_PATIENTVISIT_AHCID	2	1		15293	2
  TABLE ACCESS BY INDEX ROWID	AHC	PATIENTVISITS	3	1	25	22611	3

  here after I changed the query no display cost = 7 io wait = improvement also 7 can someone please help these

  How to adjust or rewrite lots of join not keys to multiple records on table table

  Thank you

  VSM

  you have not answered my question. Are you really calling it 35 million times in 30 minutes?

  If so, why?

• How to get SQL Developer 4.1 to display the query result?

  SQL DEV 4.0.3.16.84 execution of a SELECT statement is stored in a .sql file causes the window of the query result of pop-up indicating the result of a SELECT statement.  SQL DEV 4.1 is not to do so.

  Oops on my part; my SQL formatting has been the root cause.  I got used to insert split without any character of comment lines in front of them.  For example:

  ==================================================

  Select funny business;

  The foregoing indicates the behavior described.

  --==================================================

  Select funny business;

  With the dash double comment shows, the SQL works very well.

  This is different than previous versions of SQL Developer, but is probably better functionality.  I'll try to mark it as answered, but anyone with the admin should certainly do so if I can't.

• ORA-06504: PL/SQL: return variables of the game results or the query types do not match

  Hello!

  I have a simple object type and a proecdure in which I am trying to use it to insert into another table

  -object

  CREATE ORREPLACETYPEmt_mtg ASOBJECT

  (

  ACOL NUMBER ,

  BCOL NVARCHAR2 (100)

  );

  CREATE ORREPLACETYPEREF_MTG ASTABLEOFMt_MTG ;

  -same structure as the use of sampletbl target table in the cursor query

  create table tbl_MT_MTG

  (

  ACOL NUMBER ,

  BCOL NVARCHAR2 (100)

  );

  -procedure

  CREATE ORREPLACEINTERIORTEST_PROCEDURE1

  AS

  ref_cur sys_refcursor ;

  REFR ref_mtg ;

  BEGIN

  OPEN ref_cur FOR

  Select acol,

  BCOL

  DE sampletbl où rownum<10;

  Fetch ref_cur in bulk collectintorefr;

  Insert intotbl_MT_MTG(acol,bcol)selectacol,bcol fromtable(refr);

  commit;

  CLOSE Ref_cur;

  END;

  /

  When I run this procedure fails with

  ORA-06504: PL/SQL: return variables of the game results or the query types do not match

  ORA-06512: at "TEST_PROCEDURE1", line 10

  ORA-06512: at line 2

  Any help on this please...

  Thanks to an OLD POST below

  so perfect helped me! Thank you

  Tubby

  After 5 years of more :-)

  How to store refcursor in collection How to store refcursor in collection

• performance issue with the Oracle SQL query

  Dears

  Good evening

  I am new to begin to use Oracle SQL, I have a sql query which takes longer to run in production.

  Each table in the query contains 1.2 million records and DBA suggested using the "Oracle - tips. I don't have good knowledge on this subject and the difficulties to implement this advice for imrpovise performance. In the product the jobs Informatica are failed and stuck with this problem of query performance.

  I ask this forum for an emergency for me to solve this problem by using "advice". kindly help me.

   

  SELECT
  CASE.ID,
  CASE. DTYPE,
  CASE. Version
  CASE. EXTERNAL_REF,
  CASE. CREATION_TS,
  RQ. TYPE
  Of
  PAS_CASE CASE,
  AS_REQUEST RQ,
  CN PAS_CONTEXT
  where rq.case_id = case.id
  AND rq.id = cn.request_id
  and rq. DTYPE = "MAINREQUEST."
  and rq. TYPE in
  (
  'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
  'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.

  )
  and CN. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
  AND CAST (CN. CREATION_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)
  AND
  CAST (CN. CREATION_TS AS DATE) < TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)

  -2nd request

  SELECT
  RA.ID,
  RHEUMATOID ARTHRITIS. Version
  RHEUMATOID ARTHRITIS. REQUEST_ID,
  RA.NAME,
  RHEUMATOID ARTHRITIS. VALUE,
  RHEUMATOID ARTHRITIS. LOB_ID,
  RHEUMATOID ARTHRITIS. DTYPE,
  RHEUMATOID ARTHRITIS. CREATION_TS,
  TASK. MAIN_REQ_TYPE
  PAS_REQUESTATTRIBUTE RA
  Join
  (
  Select tsk.ID, tsk. TYPE, main_req_type main_req.
  of tsk PAS_REQUEST
  Join
  (
  Select cn.id as context_id, rq. TYPE main_req_type
  of PAS_REQUEST rq
  Cn PAS_CONTEXT
  where rq.id = cn.request_id
  and rq. DTYPE = "MAINREQUEST."
  and rq. TYPE in
  (
  'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
  'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
  )
  and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
  and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)
  and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)
  and cn.ID between the 20141999999999999 AND 20141800000000000
  and rq.ID between the 20141999999999999 AND 20141800000000000

  ) main_req
  On tsk.parent_context_id = main_req.context_id
  and tsk. DTYPE in ('ANALYSIS_TASK', 'DECISION_TASK')
  and tsk.ID between $$ LOW_ID1 AND $$ HIGH_ID1
  ) task
  on the RA REQUEST_ID = task.ID
  and RA.ID between $$ LOW_ID1 AND $$ HIGH_ID1
  UNION

  SELECT
  RA.ID,
  RHEUMATOID ARTHRITIS. Version
  RHEUMATOID ARTHRITIS. REQUEST_ID,
  RA.NAME,
  RHEUMATOID ARTHRITIS. VALUE,
  RHEUMATOID ARTHRITIS. LOB_ID,
  RHEUMATOID ARTHRITIS. DTYPE,
  RHEUMATOID ARTHRITIS. CREATION_TS,
  MAIN_REQ. TYPE
  PAS_REQUESTATTRIBUTE RA
  Join
  (
  Select rq.id, rq.type
  of PAS_REQUEST rq
  Cn PAS_CONTEXT
  where rq.id = cn.request_id
  and rq. DTYPE = "MAINREQUEST."
  and rq. TYPE in
  (
  'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
  'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
  )
  and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
  and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)
  and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)
  and cn.ID between the 20141999999999999 AND 20141800000000000
  and rq.ID between the 20141999999999999 AND 20141800000000000
  ) main_req
  on the RA REQUEST_ID = main_req.ID

  -3rd request

  SELECT

  RB.ID,

  RB. DTYPE,

  RB. Version

  RB. TYPE,

  RB. CREATION_TS,

  RB. TASK_ID,

  RB. Color

  RB. GLOBAL_RESULT,

  TASK. MAIN_REQ_TYPE

  Of

  PAS_RESULTBLOCK RB

  Join

  (

  Select tsk.ID, tsk. TYPE, main_req_type main_req.

  of tsk PAS_REQUEST

  Join

  (

  Select cn.id as context_id, rq. TYPE main_req_type

  of PAS_REQUEST rq

  Cn PAS_CONTEXT

  where rq.id = cn.request_id

  and rq. DTYPE = "MAINREQUEST."

  and rq. TYPE in

  (

  'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.

  'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.

  )

  and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')

  and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)

  and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)

  and cn.ID between the 20141999999999999 AND 20141800000000000

  and rq.ID between the 20141999999999999 AND 20141800000000000

  ) main_req

  On tsk.parent_context_id = main_req.context_id

  and tsk. DTYPE in ('ANALYSIS_TASK', 'DECISION_TASK')

  and tsk.ID between $$ LOW_ID1 AND $$ HIGH_ID1

  ) task

  We rb.task_id = task.ID

  and rb.ID between $$ LOW_ID1 AND $$ HIGH_ID1

  and RB. TYPE is not null

  and RB. TYPE IN

  (

  'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.

  'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.

  )

  UNION

  SELECT

  RB.ID,

  RB. DTYPE,

  RB. Version

  RB. TYPE,

  RB. CREATION_TS,

  RB. TASK_ID,

  RB. Color

  RB. GLOBAL_RESULT,

  TASK. MAIN_REQ_TYPE

  Of

  PAS_RESULTBLOCK RB

  Join

  (

  Select tsk.ID, tsk. TYPE, main_req_type main_req.

  of tsk PAS_REQUEST

  Join

  (

  Select cn.id as context_id, rq. TYPE main_req_type

  of PAS_REQUEST rq

  Cn PAS_CONTEXT

  where rq.id = cn.request_id

  and rq. DTYPE = "MAINREQUEST."

  and rq. TYPE in

  (

  'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.

  'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.

  )

  and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')

  and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)

  and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)

  and cn.ID between the 20141999999999999 AND 20141800000000000

  and rq.ID between the 20141999999999999 AND 20141800000000000

  ) main_req

  On tsk.parent_context_id = main_req.context_id

  and tsk. DTYPE in ('ANALYSIS_TASK', 'DECISION_TASK')

  and tsk.ID between $$ LOW_ID1 AND $$ HIGH_ID1

  ) task

  We rb.task_id = task.ID

  and rb.ID between $$ LOW_ID1 AND $$ HIGH_ID1

  and RB. TYPE is nullSELECT

  RB.ID,

  RB. DTYPE,

  RB. Version

  RB. TYPE,

  RB. CREATION_TS,

  RB. TASK_ID,

  RB. Color

  RB. GLOBAL_RESULT,

  TASK. MAIN_REQ_TYPE

  Of

  PAS_RESULTBLOCK RB

  Join

  (

  Select tsk.ID, tsk. TYPE, main_req_type main_req.

  of tsk PAS_REQUEST

  Join

  (

  Select cn.id as context_id, rq. TYPE main_req_type

  of PAS_REQUEST rq

  Cn PAS_CONTEXT

  where rq.id = cn.request_id

  and rq. DTYPE = "MAINREQUEST."

  and rq. TYPE in

  (

  'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.

  'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.

  )

  and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')

  and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)

  and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)

  and cn.ID between the 20141999999999999 AND 20141800000000000

  and rq.ID between the 20141999999999999 AND 20141800000000000

  ) main_req

  On tsk.parent_context_id = main_req.context_id

  and tsk. DTYPE in ('ANALYSIS_TASK', 'DECISION_TASK')

  and tsk.ID between $$ LOW_ID1 AND $$ HIGH_ID1

  ) task

  We rb.task_id = task.ID

  and rb.ID between $$ LOW_ID1 AND $$ HIGH_ID1

  and RB. TYPE is not null

  and RB. TYPE IN

  (

  'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.

  'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.

  )

  UNION

  SELECT

  RB.ID,

  RB. DTYPE,

  RB. Version

  RB. TYPE,

  RB. CREATION_TS,

  RB. TASK_ID,

  RB. Color

  RB. GLOBAL_RESULT,

  TASK. MAIN_REQ_TYPE

  Of

  PAS_RESULTBLOCK RB

  Join

  (

  Select tsk.ID, tsk. TYPE, main_req_type main_req.

  of tsk PAS_REQUEST

  Join

  (

  Select cn.id as context_id, rq. TYPE main_req_type

  of PAS_REQUEST rq

  Cn PAS_CONTEXT

  where rq.id = cn.request_id

  and rq. DTYPE = "MAINREQUEST."

  and rq. TYPE in

  (

  'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.

  'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.

  )

  and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')

  and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)

  and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)

  and cn.ID between the 20141999999999999 AND 20141800000000000

  and rq.ID between the 20141999999999999 AND 20141800000000000

  ) main_req

  On tsk.parent_context_id = main_req.context_id

  and tsk. DTYPE in ('ANALYSIS_TASK', 'DECISION_TASK')

  and tsk.ID between $$ LOW_ID1 AND $$ HIGH_ID1

  ) task

  We rb.task_id = task.ID

  and rb.ID between $$ LOW_ID1 AND $$ HIGH_ID1

  and RB. TYPE is null

  -4th query

  SELECT
  RI.ID,
  UII DTYPE,
  UII Version
  UII RESULTBLOCK_ID,
  RI.NAME,
  UII VALUE,
  UII UNIT,
  UII Color
  UII LOB_ID,
  UII CREATION_TS,
  UII SEQUENCE,
  UII DETAILLEVEL,
  RES_BLK. MAIN_REQ_TYPE
  Of
  RI PAS_RESULTITEM
  Join
  (
  Select
  rb.ID, rb. TYPE rb_type, task. TYPE as the task_type, task. pas_resultblock rb main_req_type
  Join
  (
  Select tsk.ID, tsk. TYPE, main_req_type main_req.
  of tsk PAS_REQUEST
  Join
  (
  Select cn.id as context_id, rq. TYPE main_req_type
  of PAS_REQUEST rq
  Cn PAS_CONTEXT
  where rq.id = cn.request_id
  and rq. DTYPE = "MAINREQUEST."
  and rq. TYPE in
  (
  'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
  'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
  )
  and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
  and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)
  and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)
  and cn.ID between the 20141999999999999 AND 20141800000000000
  and rq.ID between the 20141999999999999 AND 20141800000000000
  ) main_req
  On tsk.parent_context_id = main_req.context_id
  and tsk. DTYPE in ('ANALYSIS_TASK', 'DECISION_TASK')
  and tsk.ID between the 20141999999999999 AND 20141800000000000
  ) task
  We rb.task_id = task.ID
  and rb.ID between the 20141999999999999 AND 20141800000000000
  and RB. TYPE IN
  (
  'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
  'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
  )
  ) res_blk
  On ri.resultblock_id = res_blk.ID
  where IN RI.NAME
  (
  'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
  'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
  )
  and RI.ID between the 20141999999999999 AND 20141800000000000
  and RI.NAME is not null
  UNION

  Select
  RI.ID,
  UII DTYPE,
  UII Version
  UII RESULTBLOCK_ID,
  RI.NAME,
  UII VALUE,
  UII UNIT,
  UII Color
  UII LOB_ID,
  UII CREATION_TS,
  UII SEQUENCE,
  UII DETAILLEVEL,
  RES_BLK. MAIN_REQ_TYPE
  of pas_resultitem ri
  Join
  (
  Select
  rb.ID, rb. TYPE rb_type, task. TYPE as the task_type, task. pas_resultblock rb main_req_type
  Join
  (
  Select tsk.ID, tsk. TYPE, main_req_type main_req.
  of tsk PAS_REQUEST
  Join
  (
  Select cn.id as context_id, rq. TYPE main_req_type
  of PAS_REQUEST rq
  Cn PAS_CONTEXT
  where rq.id = cn.request_id
  and rq. DTYPE = "MAINREQUEST."
  and rq. TYPE in
  (
  'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
  'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
  )
  and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
  and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)
  and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)
  and cn.ID between the 20141999999999999 AND 20141800000000000
  and rq.ID between the 20141999999999999 AND 20141800000000000
  ) main_req
  On tsk.parent_context_id = main_req.context_id
  and tsk. DTYPE in ('ANALYSIS_TASK', 'DECISION_TASK')
  and tsk.ID between the 20141999999999999 AND 20141800000000000
  ) task
  We rb.task_id = task.ID
  and rb.ID between the 20141999999999999 AND 20141800000000000
  ) res_blk
  On ri.resultblock_id = res_blk.ID
  where RI.ID between 20141800000000000 20141999999999999 AND
  and RI.NAME is null

  -REQUEST OF 5HT

  SELECT

  TSK.ID,

  TSK. Version

  TSK. DTYPE,

  TSK. CASE_ID,

  TSK. TYPE,

  TSK. CORRELATION_ID,

  TSK. INITIATOR,

  TSK. EXECUTOR,

  TSK. CATEGORY,

  TSK. PARENT_CONTEXT_ID,

  TSK. CREATION_TS,

  MAIN_REQ. MAIN_REQ_TYPE

  Of

  TSK PAS_REQUEST

  Join

  (

  Select cn.id as context_id, rq. TYPE main_req_type

  of PAS_REQUEST rq

  Cn PAS_CONTEXT

  where rq.id = cn.request_id

  and rq. DTYPE = "MAINREQUEST."

  and rq. TYPE in

  (

  'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.

  'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.

  )

  and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')

  and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)

  and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)

  and cn.ID between the 20141999999999999 AND 20141800000000000

  and rq.ID between the 20141999999999999 AND 20141800000000000

  ) main_req

  On tsk.parent_context_id = main_req.context_id

  and tsk. DTYPE in ('ANALYSIS_TASK', 'DECISION_TASK')

  and tsk.ID between $$ LOW_ID1 AND $$ HIGH_ID1

  UNION

  Select

  MREQ.ID,

  MREQ. Version

  MREQ. DTYPE,

  MREQ. CASE_ID,

  MREQ. TYPE,

  MREQ. CORRELATION_ID,

  MREQ. INITIATOR,

  MREQ. EXECUTOR,

  MREQ. CATEGORY,

  MREQ. PARENT_CONTEXT_ID,

  MREQ. CREATION_TS,

  MREQ. TYPE

  of PAS_REQUEST mreq

  Cn PAS_CONTEXT

  where mreq.id = cn.request_id

  and mreq. DTYPE = "MAINREQUEST."

  and mreq. TYPE in

  (

  'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.

  'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.

  )

  and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')

  and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)

  and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)

  and cn.ID between the 20141999999999999 AND 20141800000000000

  and mreq.ID between the 20141999999999999 AND 20141800000000000

  Tips will be may not be necessary (proportional to the cardinalities need)
  

  
  

  Select pc.id, pc.dtype, pc.version, pc.external_ref, pc.creation_ts, rq.type

  from pas_case

  as_request rq,

  CN pas_context

  where rq.case_id = pc.id

  and rq.id = cn.request_id

  and rq.dtype = 'MAINREQUEST. '

  and rq.type in ('bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution', ' bgc.tbf.repair.vap',

  'bgc.dar.e2etest ',' bgc.dar.e2etest.intermediate.execution', ' bgc.cbm ',.

  'bgc.dar.e2etest.preparation ','bgc.chc.polling '.

  )

  and cn.status in ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')

  and cn.creation_ts > = to_timestamp ('2014-05-06 00:00:00 ',' yyyy-mm-dd hh24:mi:ss')

  and cn.creation_ts<= to_timestamp('2014-05-06="" 23:59:59.999999','yyyy-mm-dd="">

  -2nd request

  with

  main_request as

  (select / * + materialize * /)

  CN.ID as context_id, rq.type as main_req_type

  of pas_request rq

  Join
  

  CN pas_context

  On rq.id = cn.request_id

  and rq.dtype = 'MAINREQUEST. '

  and rq.type in ('bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution', ' bgc.chc.polling',

  'bgc.tbf.repair.vap ',' bgc.dar.e2etest', ' bgc.dar.e2etest.intermediate.execution ',.

  'bgc.cbm ','bgc.dar.e2etest.preparation '.

  )

  and cn.status in ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')

  and cn.end_ts > = to_timestamp ('2014-05-06 00:00:00 ',' yyyy-mm-dd hh24:mi:ss')

  and cn.end_ts<= to_timestamp('2014-05-06="" 23:59:59.999999','yyyy-mm-dd="">

  and cn.id between 20141800000000000 and 20141999999999999

  and rq.id between 20141800000000000 and 20141999999999999

  )

  Select ra.id, ra.version, ra.request_id, ra.name, ra.value, ra.lob_id, ra.dtype, ra.creation_ts, task.main_req_type

  of pas_requestattribute ra

  Join

  (select tsk.id, tsk.type, main_req.main_req_type

  from pas_request tsk

  Join

  main_request main_req

  On tsk.parent_context_id = main_req.context_id

  and tsk.dtype in ('ANALYSIS_TASK', 'DECISION_TASK')

  and tsk.id between $$ low_id1 and $$ high_id1

  ) task

  We ra.request_id = task.id

  and ra.id between $$ low_id1 and $$ high_id1

  Union

  Select ra.id, ra.version, ra.request_id, ra.name, ra.value, ra.lob_id, ra.dtype, ra.creation_ts, main_req.type

  of pas_requestattribute ra

  Join

  main_request main_req

  On ra.request_id = main_req.context_id

  -3rd request

  Select rb.id, rb.dtype, rb.version, rb.type, rb.creation_ts, rb.task_id, rb.color, rb.global_result, task.main_req_type

  of pas_resultblock rb

  Join

  (select tsk.id, tsk.type, main_req.main_req_type

  from pas_request tsk

  Join

  (select cn.id as context_id, rq.type as main_req_type

  of pas_request rq

  Join

  CN pas_context

  On rq.id = cn.request_id

  and rq.dtype = 'MAINREQUEST. '

  and rq.type in ('bgc.dar.vap.resolution.advice ','bgc.dar.e2etest.execution ',

  'bgc.tbf.repair.vap ','bgc.dar.e2etest ',.

  'bgc.dar.e2etest.intermediate.execution ','bgc.cbm ',.

  'bgc.dar.e2etest.preparation ','bgc.chc.polling '.

  )

  and cn.status in ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')

  and cn.end_ts > = to_timestamp ('2014-05-06 00:00:00 ',' yyyy-mm-dd hh24:mi:ss')

  and cn.end_ts<= to_timestamp('2014-05-06="" 23:59:59.999999','yyyy-mm-dd="">

  and cn.id between 20141800000000000 and 20141999999999999

  and rq.id between 20141800000000000 and 20141999999999999

  ) main_req

  On tsk.parent_context_id = main_req.context_id

  and tsk.dtype in ('ANALYSIS_TASK', 'DECISION_TASK')

  and tsk.id between $$ low_id1 and $$ high_id1

  ) task

  We rb.task_id = task.id

  and rb.id between $$ low_id1 and $$ high_id1

  where the type is null

  or (type is not null

  type in ('bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ', ' bgc.tbf.repair.vap',

  'bgc.dar.e2etest ',' bgc.dar.e2etest.intermediate.execution', ' bgc.cbm ',.

  'bgc.dar.e2etest.preparation ','bgc.chc.polling '.

  )

  )

  -4th query

  Select ri.id, ri.dtype, ri.version, ri.resultblock_id, ri.name, ri.value, ri.unit, ri.color, ri.lob_id.

  RI.creation_ts, RI. Sequence, RI. DetailLevel, res_blk.main_req_type

  of pas_resultitem ri

  Join

  (select rb.id, rb.type as rb_type, task.type as task_type, task.main_req_type)

  of pas_resultblock rb

  Join

  (select main_req_type, tsk.id, tsk.type, main_req.)

  from pas_request tsk

  Join

  (select cn.id as context_id, rq.type as main_req_type

  of pas_request rq

  Join

  CN pas_context

  On rq.id = cn.request_id

  and rq.dtype = 'MAINREQUEST. '

  and rq.type in ('bgc.dar.vap.resolution.advice ','bgc.dar.e2etest.execution ',

  'bgc.tbf.repair.vap ','bgc.dar.e2etest ',.

  'bgc.dar.e2etest.intermediate.execution ','bgc.cbm ',.

  'bgc.dar.e2etest.preparation ','bgc.chc.polling '.

  )

  and cn.status in ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')

  and cn.end_ts > = to_timestamp ('2014-05-06 00:00:00 ',' yyyy-mm-dd hh24:mi:ss')

  and cn.end_ts<= to_timestamp('2014-05-06="" 23:59:59.999999','yyyy-mm-dd="">

  and cn.id between 20141800000000000 and 20141999999999999

  and rq.id between 20141800000000000 and 20141999999999999

  ) main_req

  On tsk.parent_context_id = main_req.context_id

  and tsk.dtype in ('ANALYSIS_TASK', 'DECISION_TASK')

  and tsk.id between 20141800000000000 and 20141999999999999

  ) task

  We rb.task_id = task.id

  and rb.id between 20141800000000000 and 20141999999999999

  and rb.type in ('bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution', ' bgc.tbf.repair.vap',

  'bgc.dar.e2etest ',' bgc.dar.e2etest.intermediate.execution', ' bgc.cbm ',.

  'bgc.dar.e2etest.preparation ','bgc.chc.polling '.

  )

  ) res_blk

  On ri.resultblock_id = res_blk.id

  and ri.id between 20141800000000000 and 20141999999999999

  where ri.name is null

  or (ri.name is not null

  and ri.name in ('bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution', ' bgc.tbf.repair.vap',

  'bgc.dar.e2etest ',' bgc.dar.e2etest.intermediate.execution', ' bgc.cbm ',.

  'bgc.dar.e2etest.preparation ','bgc.chc.polling '.

  )

  )

  -5th application

  with

  main_request as

  (select / * + materialize * / )

  mreq.ID, mreq.version, mreq.dtype, mreq.case_id, mreq.type, mreq.correlation_id, mreq. Initiator, mreq. Executor,

  mreq. Category, mreq.parent_context_id, mreq.creation_ts, mreq.type

  of pas_request mreq

  Join

  CN pas_context

  On mreq.id = cn.request_id

  and mreq.dtype = 'MAINREQUEST. '

  and mreq.type in ('bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution', ' bgc.tbf.repair.vap',

  'bgc.dar.e2etest ',' bgc.dar.e2etest.intermediate.execution', ' bgc.cbm ',.

  'bgc.dar.e2etest.preparation ','bgc.chc.polling '.

  )

  and cn.status in ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')

  and cn.end_ts > = to_timestamp ('2014-05-06 00:00:00 ',' yyyy-mm-dd hh24:mi:ss')

  and cn.end_ts<= to_timestamp('2014-05-06="" 23:59:59.999999','yyyy-mm-dd="">

  and cn.id between 20141800000000000 and 20141999999999999

  and mreq.id between 20141800000000000 and 20141999999999999

  )

  Select tsk.id, tsk.version, tsk.dtype, tsk.case_id, tsk.type, tsk.correlation_id, tsk.initiator, tsk.executor,

  TSK. Category, tsk.parent_context_id, tsk.creation_ts, main_req.main_req_type

  from pas_request tsk

  Join

  main_request main_req

  On tsk.parent_context_id = main_req.id

  and tsk.dtype in ('ANALYSIS_TASK', 'DECISION_TASK')

  and tsk.id between $$ low_id1 and $$ high_id1

  Union

  SELECT id, version, dtype, case_id, type, correlation_id, initiator, executor,

  category, type parent_context_id, creation_ts

  of main_request

  Concerning

  Etbin

• SQL QUERY THAT RETURNS THE PL/SQL

  Hello

  I'm putting in 4.2 below apex

  DECLARE

  date of frdate: =: P22_FROMDATE;

  date date: =: P22_TODATE;

  l_date1 varchar2 (11): = to_char(frdate,'dd-mon-yyyy');

  l_date2 varchar2 (11): = to_char(todate,'dd-mon-yyyy');

  v_sql varchar2 (32000);

  v_Name varchar2 (4000): = months_name (frdate, todate);

  char (1) of the v1: = q "[']";

  number of lbr1 (6): =: P22_FROMBRANCH;

  number of LBR2 (6): =: P22_TOBRANCH;

  number of M1 (6): = 11;

  Start

  v_sql: ='SELECT * FROM (SELECT LBRCODE, PRDACCTID, MN, AVGX FROM (SELECT LBRCODE, PRDACCTID, MN, SUM (BALL) BALL, COUNT (MN) DAYS, ROUND (SUM (BAL) count (MN), 2) AVGX ';))

  v_sql: = v_sql | "FROM (SELECT LBRCODE, PRDACCTID, TO_CHAR (BALDATE,'|)) CHR (39) | ' MM' | CHR (39) |') ' | ' ||'|| CHR (39) | » _'|| CHR (39) |' | ' || «TO_CHAR (BALDATE,'|)» CHR (39) | ' AAAA '. CHR (39) |') MN, BALL ';

  V_SQL: = V_SQL | "(SELECT Q2. LBRCODE, Q2. PRDACCTID, T1. BALDATE, T_OST_NEW (Q2. LBRCODE, Q2. PRDACCTID, T1. BALDATE) BALL ';

  V_SQL: = V_SQL | "FROM (select TO_DATE('||) Chr (39) | l_date1 | Chr (39) | «, » || CHR (39) | ' DD-MON-YYYY ' | CHR (39) |') baldate FROM DUAL Union all the ';

  V_SQL: = V_SQL |' select (TO_DATE('||) Chr (39) | l_date1 | Chr (39) | «, » || CHR (39) | ' DD-MON-YYYY ' | CHR (39) |') + level) double baldate ';

  V_SQL: = V_SQL |' connect by level < = (TO_DATE('||) Chr (39) | l_date2 | Chr (39) | «, » || CHR (39) | ' DD-MON-YYYY ' | CHR (39) |') -TO_DATE('||) Chr (39) | l_date1 | Chr (39) | «, » || CHR (39) | ' Dd-mon-yyyy ' | CHR (39) |')) ) Q1,';

  V_SQL: = V_SQL | "(SELECT LBRCODE,'|) ' (rpad (prdcd, 8,'|)) V1 ||'' || v1 |') || LTRIM (rpad('|| v1 ||) » x'|| V1 | «, 25, » || v1 | » 0' || v1||'),'|| v1 | » x'|| v1 |')) prdacctid OF D009021 WHERE the LBRCODE between ' | : P22_FROMBRANCH |' and ' | : P22_TOBRANCH | "AND moduleinfo =' | TO_NUMBER(:P22_SELECTLIST);

  V_SQL: = V_SQL |') ((Q2)) GROUP BY LBRCODE, PRDACCTID, MN))';

  V_SQL: = V_SQL | "PIVOT (MAX (AVGX) (MN) IN (';))

  V_SQL: = V_SQL | V_NAME;

  V_SQL: = V_SQL |')) ORDER OF LBRCODE, PRDACCTID ';

  RETURN V_SQL;

  END;

  I created all the elements of the required page

  I get the error message like missing expression

  to test, I created a function to return the query, it works very well know to return a query that gives me desired report

  am I missing something?

  Help, please

  HEMU wrote:

  Hello Sir

  Sorry to bother you again

  I tried to use «function that returns colon-delimited topics»

  and I got following error

  unable to determine query headings: ORA-06550: line 1, column 138: PLS-00103: Encountered the symbol ";" when expecting one of the following:  . ( ) , * % & = - + < / > at in is mod remainder not rem =>  <> or != or ~= >= <= <> and or like like2 like4 likec between || multiset member submultiset The symbol ")" was substituted for ";" to continue.
  

  failed to parse SQL query:
  

  can take you a look at page901 once again please and a function named months_namex

  is it feasible that I'm looking for?

  The immediate cause of this error is simply incorrect report headings function call syntax:

  return months_namex(to_date(:p901_fromdate,'dd-mon-yyyy'),to_date(:p901_todate,'dd-mon-yyyy')

  This should be:

  return months_namex(to_date(:p901_fromdate,'dd-mon-yyyy'),to_date(:p901_todate,'dd-mon-yyyy'));

  However there is no months_namex function defined in the workspace.

• Moving a query SQL using XMLELEMENT to PLSQL

  Here is the PLSQL

  DECLARE

  letexte CLOB.

  BEGIN

  with test_table as)

  SELECT VM_REPORT_DATE, quantity, item,.

  (CASE point

  WHEN "VM_HOSTS_NUM" THEN "y_axis_1".

  WHEN "VM_NUMBER" THEN "y_axis_1".

  WHEN "VM_CPU_COUNT" THEN "y_axis_1".

  WHEN "VM_PHYS_MEM" THEN "y_axis_2".

  WHEN "VM_VIRT_MEM" THEN "y_axis_2".

  WHEN "VM_VIRT_MEM" THEN "y_axis_2".

  WHEN "VM_TOTAL_DISK" THEN "y_axis_3".

  WHEN "VM_PROVISIONED_DISK" THEN "y_axis_3".

  ELSE 'y_axis.

  Wser END)

  of VM_CORE unpivot)

  ITEM quantity in (VM_HOSTS_NUM, VM_NUMBER, VM_PHYS_MEM, VM_VIRT_MEM, VM_CPU_COUNT, VM_TOTAL_DISK, VM_PROVISIONED_DISK)

  () where VM_DCNAME = "bc_production")

  SELECT XMLELEMENT ("SERIES", xmlAttributes (as "name", "Line" as 'type', wser as "y_axis"),

  XMLAGG (XMLElement ("point", xmlAttributes (VM_REPORT_DATE as "name", much like "y"))) nominative CASE

  ) NOMINATIVE in letexte from test_table group by point;

  : BC_PROD_DATA: = thetext;

  END;

  The central SQL to generate works however the PLSQL calls for a select statement in each of the SELECT statements.

  I think I should use a slider for the first select statement, but I'm not sure how.

  Thank you

  I had typo. I accidentally pasted twice the first select statement.

  I got it with the following: I didn't need of you getclobvar(), but that would have been helpful, I just seriealized the XML data.

  Thank you

  DECLARE

  letexte CLOB.

  BEGIN

  with test_table as)

  SELECT VM_REPORT_DATE, quantity, item,.

  (CASE point

  WHEN "VM_HOSTS_NUM" AND THEN "

  WHEN "VM_NUMBER" AND THEN "

  WHEN "VM_CPU_COUNT" AND THEN "

  WHEN "VM_PHYS_MEM" THEN "y_axis_2".

  WHEN "VM_VIRT_MEM" THEN "y_axis_2".

  WHEN "VM_VIRT_MEM" THEN "y_axis_2".

  WHEN "VM_TOTAL_DISK" THEN "y_axis_3".

  WHEN "VM_PROVISIONED_DISK" THEN "y_axis_3".

  ELSE 'y_axis.

  Wser END)

  ,

  (CASE point

  WHEN "VM_HOSTS_NUM" THEN "#FF0000".

  WHEN 'VM_NUMBER', THEN '#AA0000 '.

  WHEN "VM_CPU_COUNT" THEN "#770000".

  WHEN "VM_PHYS_MEM" AND THEN "#0000FF".

  WHEN 'VM_VIRT_MEM' THEN ' #0000AA '.

  WHEN "VM_VIRT_MEM" AND THEN "#000077 '."

  WHEN "VM_TOTAL_DISK" AND THEN "#00FF00".

  WHEN "VM_PROVISIONED_DISK" AND THEN "#00AA00.

  ELSE 'y_axis.

  Colorr END)

  of VM_CORE unpivot)

  ITEM quantity in (VM_HOSTS_NUM, VM_NUMBER, VM_PHYS_MEM, VM_VIRT_MEM, VM_CPU_COUNT, VM_TOTAL_DISK, VM_PROVISIONED_DISK)

  () where VM_DCNAME = "bc_production")

  SELECT XMLSERIALIZE)

  CONTENT XMLELEMENT ('data', XMLAGG (XMLELEMENT ("series", xmlAttributes (point as "name", "Line" as the "type", wser as "y_axis", colorr as "color"),

  XMLAGG)

  XMLElement ("point", xmlAttributes (VM_REPORT_DATE as "name", much like "y")) order by VM_REPORT_DATE

  )

  ))

  )

  )

  in the Group test_table letexte by order of point by point.

  : BC_PROD_DATA: = thetext;

  END;

• query sql delicate... date of the created object.

  friends...
  I am trying to solve this query sql delicate for some time, but unable to progress when it comes to this day...
  
  Q.
  Query dba_objects and list all tables created yesterday ' sysdate - 1' and in another column of the list all the tables created ' sysdate - 7'.
  
  -query below gives me to yesterday, but don't know how to have 'Last_week' column filled... maybe I join?
  

  select owner, object_name, to_char(created, 'MM-DD-YYYY HH24:MI:SS') "Yesterday", to_char(created, 'MM-DD-YYYY HH24:MI:SS') "Last_Week"
  from dba_objects
  where object_type = 'TABLE'
  and created >=trunc(sysdate - 1)
  and created < trunc(sysdate)

  appreciate your time and effort in looking at this...
  
  Thank you
  
  Published by: khallas301 on March 19, 2013 09:27
  typo edited... Thanks to frank

  khallas301 wrote:
  Query dba_objects and list all tables created yesterday ' sysdate - 1' and in another column of the list all the tables created ' sysdate - 7'.

  Well, sysdate - 7 ways months ago, not last week. If this is what you want, then:

  select  owner,
          object_name,
          case
            when trunc(created) = trunc(sysdate - 1) then to_char(created,'MM-DD-YYYY HH24:MI:SS')
          end "Yesterday",
          case
            when trunc(created) = trunc(sysdate - 7) then to_char(created, 'MM-DD-YYYY HH24:MI:SS')
          end "Week Ago"
    from  dba_objects
    where object_type = 'TABLE'
      and (
              trunc(created) = trunc(sysdate - 1)
           or
              trunc(created) = trunc(sysdate - 7)
          )
  /
  

  SY.

• Detroit SQL of the query in writing: analysis of the GAPS in order of Row_Wid in a Table

  I am writing a query that scans a product Dimension Row_Wid, notes the gaps in the sequence and generates the missing Row_Wids. It loads these 'missing Feds"in a sequence of wid created table to reuse by Informatica transformation of research without bond during the subsequent data loads. Yes, I expect many people asking why I do this. The simple reason is that Informatica has a limit of 2 147 sequence generator 483 647'. I arrived at this upper limit, but my table contains only 2.2 million lines of actual data. I'm trying to reuse these Row_Wids now 'not used '.
  
  I have a job with success the query to find the first ditch and fill some of that gap. Now my next problem is to figure out how to get my request to move away from the next. I can't use the PL/SQL in the query. My client does not allow its use.
  
  I'll paste the code I have now. I need to evolve to the next gap. Suggestions? Help? Ideas?
  
  
  
  The Version of database: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
  
  The table I'm inserting: CREATE GLOBAL TEMPORARY TABLE "OLAP". "" ROWWIDVAL "("ROWWID"NUMBER (10.0), NUMBER (10,0)"EXTRAVAL") ON COMMIT PRESERVE ROWS;
  A note: the Temp Table to test this point, I've created is "RowWidVal" and it has two columns.
  
  -Updated Code collaboration-

  Insert Into RowWidVal(
  SELECT
       CASE
            WHEN NumGen <= GapSize+2 THEN (P2.MinGapStart-1)+NG.NumGen
       END RowWid, 0
  FROM
       (SELECT MIN(T4.GapStart) MinGapStart, MIN(T4.GapStop) MinGapStop, (MIN(T4.GapStop) - MIN(T4.GapStart)) GapSize
            FROM
                 (SELECT T2.row_wid + 1 GapStart,
                      (SELECT MIN(T1.row_wid) - 1 FROM w_product_d_test T1 WHERE T1.row_wid > T2.row_wid) GapStop
                      FROM w_product_d_test T2
                      LEFT OUTER JOIN w_product_d_test T3 ON T2.row_wid = T3.row_wid - 1
                 WHERE T3.row_wid IS NULL
                 ) T4
       WHERE T4.GapStop IS NOT NULL
    ) P2,
       (SELECT LEVEL NumGen
        FROM dual
        CONNECT BY LEVEL <= (SELECT ((Min(GapStop) - Min(T4.GapStart)) +1) GapSize
                                 FROM
                                     (SELECT T2.row_wid + 1 GapStart,
                                          (SELECT MIN(T1.row_wid) - 1 FROM w_product_d_test T1 WHERE T1.row_wid > T2.row_wid) GapStop
                                          FROM w_product_d_test T2
                                          LEFT OUTER JOIN w_product_d_test T3 ON T2.row_wid = T3.row_wid - 1
                                          WHERE T3.row_wid IS NULL
                                     ) T4
                                      WHERE T4.GapStop IS NOT NULL)
       ) NG
  WHERE P2.MinGapStart < P2.MinGapStart+(GapSize+2));

  Published by: user1002601 on 16 January 2013 08:33
  
  Published by: user1002601 on 16 January 2013 08:39

  How about this?

  Sample data:

  SQL> create table w_product_d_test (row_wid number);
  
  Table created
  
  SQL>
  SQL> insert into w_product_d_test (row_wid)
    2  select column_value
    3  from table(sys.odcinumberlist(1,2,3,4,5,11,12,13,31,32,33,34));
  
  12 rows inserted
  
  SQL> select * from w_product_d_test;
  
     ROW_WID
  ----------
           1
           2
           3
           4
           5
          11
          12
          13
          31
          32
          33
          34
  
  12 rows selected
   
  

  Generate sequence available numbers:

  SQL> with gaps as (
    2    select rw, gapsize
    3    from (
    4      select row_wid as rw
    5           , row_wid - lag(row_wid,1,0) over(order by row_wid) - 1 as gapsize
    6      from w_product_d_test
    7    )
    8    where gapsize > 0
    9  )
   10  select g.rw - t.column_value as available_rw
   11  from gaps g
   12     , table(
   13         cast(
   14           multiset( select level from dual connect by level <= g.gapsize )
   15           as sys.odcinumberlist
   16         )
   17       ) t
   18  ;
  
  AVAILABLE_RW
  ------------
            10
             9
             8
             7
             6
            30
            29
            28
            27
            26
            25
            24
            23
            22
            21
            20
            19
            18
            17
            16
            15
            14
  
  22 rows selected