Similar Questions

• Use Microsoft SQL Server Management Studio 2008 home

  I am a student in learning SQL. I have downloaded Microsoft SQL Server Management Studio 2008 as is the SQL software used in class. When I click on Connect, it is said that it can not connect. I chose the following options.

  Server type: the database engine
  Server name: (local)

  Authentication: Windows authentication

  What should I do?

  Hello

  Thanks for posting your query in Microsoft Community.

  According to the description, the problem is related to the installation of Microsoft® SQL Server® 2008 Management Studio Express to the point 8.1 of Windows, I suggest you to ask your question in the following link, because they have more expertise on this issue:

  http://social.msdn.Microsoft.com/forums/SQLServer/en-us/1cceeaf9-78EC-44ef-AAF8-b9965830f5c6/install-SQL-Server-2014-CTP1-on-Windows-81

  I hope this helps.

• Could not open file mdf in Microsoft SQL Server Management Studio Express 2005

  I had Microsoft SQL Server Express 2005 already installed. I just installed the Microsoft SQL Server Management Studio Express 2005 and tried to open my mdf file. I get an error message that says:

  There is no editor available for ' C:\Inetpub\wwwroot\intran et\app_dat a\intranet .mdf).

  Make sure the application for the type of file (.mdf) is installed.

  I did something wrong? I just clicked through the default values in the Management Studio Express installation.

  How can I get it work?

  1. Log in to SQL Server Management Studio.
  2. Navigate to the database that you want to restore.
  3. Right click > tasks > restore > database.
  4. Once on the general tab select "from device" for the source of food, and then access the .bak file that you are restoring.
  5. Check that the Destination for restore is set to the correct database.
  6. Select the Options tab.
  7. Check "Overwrite existing of database (to be REPLACED)"
  8. Click OK
  9. If she is unable to help you, then you can use software professinal for sql databases crashed https://repairsql.recoverytoolbox.com/ Recovery Toolbox for SQL Server

• Oracle 9i with microsoft sql server.

  How to connect oracle 9i with microsoft sql server.

  simply the following steps...

  Oracle9i, like the previous versions, supports heterogeneous services in order to allow data in the non-Oracle database to be queried using SQL. This support was in the form of transparent gateways, which are connectivity, vendor specific or generic using ODBC or OLEDB to connect. Features supported by a generic connectivity are generally more limited than as possible when using the vendor specific gateways, but it is fast and simple to configure. The following steps can be used to connect to Oracle to any compatible ODBC database (MS Access, SQL Server etc.) on the local server:
  Make sure that a valid user name and password are present for the non-Oracle (MyUser/mypassword) database.
  Create a data source ODBC for database non-Oracle (Network1).
  Create a file called: "ORACLE_HOME\hs\admin\initACCESS1.ora", which contains:

  HS_FDS_CONNECT_INFO = Network1 #ODBC DSN
  HS_FDS_TRACE_LEVEL = OFF
  Add the following entry in the tnsnames.ora file:

  NETWORK1. WORLD =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = tcp)(HOST=localhost) (PORT = 1521))
  (CONNECT_DATA = (SID = ACCESS1))
  (HS = OK)
  )
  Add the following entry in the listener.ora file:

  (SID_DESC =
  (SID_NAME = NETWORK1)
  (ORACLE_HOME = D:\Oracle\Ora\9011)
  (PROGRAM = hsodbc)
  )
  Reload the listener: lsnrctl reload
  Create a database to help link:

  CREATE DATABASE LINK access1.world CONNECT TO 'MyUser' IDENTIFIED BY 'MyPassword' USING "Network1. WORLD ';
  Query the table to help:

  SELECT *.
  OF [email protected];
  With MS Access, the first query is slow because of the request for access is loading. As expected, the following queries are not displayed a similar shift.

• How SQL Server Management Studio instore in Windows 8 app once deleted accidentally

  The SSMS app was accidentally deleted when shortcut app on the screen. Now using search, can't find SSMS app. How in-store?

  Thank you!

  Hello

  If you uninstall an application, you can re - install your applications in Windows store. To open your applications follow these steps.

  a. open store Windows.

  b. right-click on the top of the window.

  c. click on your applications and install SQL Server Management Studio App.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• A SQL server management studio 2012 error: PERCENTILE_DISC function is not allowed in the current compatibility mode. It can only in mode 110 or higher.

  Our company just upgraded to SQL Server Management Studio 2012 and it has been very useful because I needed to use the percentile for the code I wrote. As a first step, the function did not work because I set the compatibility mode 110 level. After that I did, the function worked. However, now it does not work yet, and I get the same error:

  The PERCENTILE_DISC function is not allowed in the current compatibility mode. It can only in mode 110 or higher.

  I went to the properties of database section, then options and noticed that the compatibility mode has not changed, it is set to "SQL Server 2012 (110). I even used the following code to see if that would help at all even if the compatibility mode is already on this mode:

  ALTER DATABASE Analytics
  SET COMPATIBILITY_LEVEL = 110 
  

  Someone already had this problem or knows if I need to change something in the properties of database for this function work? Is this just a bug in the new version?

  Hello

  I suggest you post this question in the SQL Server 2012 TechNet Forums: http://social.technet.microsoft.com/Forums/en-us/category/sqlserver

  Thank you.

• SQL server management studio 2008 Express intall error

  When you try to install SQL server management studio Express 2008 I get this error:

  TITLE: Default the SQL Server installation program.
  ------------------------------

  Setup of SQL Server encountered the following error:

  Invoke or BeginInvoke cannot be called on a control until the window handle has been created...

  ------------------------------
  BUTTONS:

  Ok
  ------------------------------

  Berfore I installed visual studio 2010 ultimate and Setup install with visual studio, sql server 2008 and I have windows xp servicr pack 3.

  ASK THE QUESTION IN THE SQL SERVER FORUM:
  http://social.msdn.Microsoft.com/forums/en/category/SQLServer

• SQL Server Management Studio and SQL Azure

  Hello:

  I want to test SQL Azure - before be recommended to a customer.

  The last time I performed a test of SQL Azure - I couldn't use SQL Server Management Studio to:

  • Create tables with table designer
  • Add - or remove - the columns of the tables with table designer
  • Create diagrams

  You know, the basic things you need to do to build, manage a database. Then... I told my customer that they would be better to stay with SQL Server, until Microsoft up to speed with SSMS.

  Now I heard the new SSMS versions allow the use of designer tables and diagrams with SQL Azure. My questions are:

  1. Is it true that newer versions of SSMS for use of the table Design and diagramming with SQL Azure?
  2. If Yes, what version of SSMS and what version of SQL Azure?

  Thanks in advance - MM

  Hello

  Post your request in the forum for better support.

  SQL Azure

  Thank you.

• Error during the Set Up of Microsoft SQL Server 2012

  I installed Visual Studio 2012 on my system after I installed Microsoft SQL Server 2012. I am getting error while Set Up a Microsoft SQL Server 2012 next:

  Action required:
  Use the following information to resolve the error and then repeat the installation process.

  Ground breaking feature:
  An error has occurred for a dependence of the feature causing the installation process for the feature to fail.

  Error details:
  § Installing the SQL Server 2008 installation media files
  An error occurred during the installation of assembly ' Microsoft.VC80.MFC, version = "8.0.50727.1833", publicKeyToken = "1fc8b3b9a1e18e3b", processorArchitecture = "x 86", type ="win32" '. " See Help and Support for more information. HRESULT: 0X800736B3.
  Error code: 1935

  Snapshot is attached below.

  Help, please.

  

  SB

  SQL server must question here

• Best practices for vCenter 5.1 with Microsoft SQL Server 2008 R2

  I am looking for a best practices or really any documentation on configuring vCenter 5.1 with a SQL Server 2008 R2 database. I see that SQL Server 2008 R2 is supported, but that's all. Any help is appreciated.

  Unless you have a huge (and I mean huge) environment, the vCenter database in general is not that big of a deal or go-getter and was apparently not deemed worthy for some secret magic tips because of this.

  Standard SQL "best practices" and observe the standard installation documentation when deployment vCenter and you should be good to go.

  Some documents on the vCenter more in-depth database are here:

  http://www.VMware.com/resources/TechResources/10162

  http://www.VMware.com/resources/TechResources/10302

  Also, I highly recommend you watch this recording of VMworld:

  http://www.YouTube.com/watch?v=5Ly64_ca7-I

• Impossible to uninstall Microsoft SQl Server Management

  So I was installing new management and Microsoft SQL Server during installation my PC restarted, I'm trying to uninstall t but it doesn't let me, its in the list of programs, but when I click on install it do anything, and take his place I need... Please help me!

  Running windows 7

  Hello

  Try to repair the installation using the procedure in the following article:

  https://msdn.Microsoft.com/en-us/library/Cc646006 (v = sql.110) .aspx

  If the above does not help, try to uninstall all remnants of SQL Server by using the following article:

  http://www.sqlcoffee.com/Tips0026.htm

  Let me recommend the following forum for SQL Server related issues.

  https://social.msdn.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  I hope this helps.

  Kind regards

  Alberto Morillo
  SQLCoffee.com

• Copy of database SQL from SQL 2005 using SQL Server Management Studio 2008

  I made a backup of the database and tried to do a cover but I don't know where is the database restored too.

  I connected the old PC to SQL with the new using SQL 2008 Management Studio.

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  "The MSDN SQL Server Forums.

  https://social.msdn.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• In MS SQL Server Management Studio, cannot add a port to the Windows Firewall exceptions list.

  I am trying to debug a sql script in the debugger to MS SQL Server 2008 and I received a message saying 'could not configure the Windows Firewall. Cannot add a port to the Windows Firewall exceptions list. "Use the Panle controls to manually configure Windows Firewall.

  Hi GusGomez,

  The question you have posted is related to the server and would be better suited in the Technet forums. Please visit the link below to find a community that will support what ask you
  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer
   
  Hope this information helps.

• ODI is compatible with Microsoft SQL Server 2008?

  Hello
  
  We try to ODI for SQL Server 2008, but we get an error: "failed to connect". I don't know if the problem is the driver or incompatibility between the ODI and SQL Server 2008.
  
  Does anyone use together? Are compatible?
  
  If the answer is Yes, where is the problem? We use the following JDBC driver:
  
  com.microsoft.jdbc.sqlserver.SQLServerDriver
  JDBC:Microsoft:SQLServer: / / < host >: < port >
  
  And we download the sqljdbc_2.0 driver.
  
  Thank you very much
  
  Araitz. -.

  You should check which version of the JVM is required by this version of the driver, if I remember the 2.x versions require a JAVA 1.6 virtual machine (I coul dbe wrong, I would remember something like that)

  What error do you get? If it's the ' com.sunopsis.sql.c: no driver appropriate ", it says it can't find the jar file (sqljdbc.jar) for the driver you specify. Pilots oracledi is the right place to make it.

• The PowerEdge 6850 with RHE Linux server management

  We have a PowerEdge 6850 with Red Hat Ent. 5 Linux installed.  I have difficulties to access remote management.  The machine has two network ports and it also has a PCI card with a VGA and Ethernet port... not exactly even.  I got a bit of a mess here...

  The server administrator seems to already installed in/opt/dell/srvadmin.  If I run /opt/dell/srvadmin/setup.sh I get the following:

  #./setup.sh

  ##############################################

  Custom of the administrator of the Server Setup utility

  ##############################################

  Server Administrator version 5.3.0 is currently installed.
  Components installed are:
  -srvadmin-deng - 5.3.0 - 438
  -srvadmin-jre - 5.3.0 - 438
  -srvadmin-omhip - 5.3.0 - 438
  -srvadmin-racadm4 - 5.3.0 - 438
  -srvadmin-iws - 5.3.0 - 438
  -srvadmin-storage - 5.3.0 - 438
  -srvadmin-syscheck - 5.3.0 - 438
  -srvadmin-happy - 5.3.0 - 438
  -srvadmin-omilcore - 5.3.0 - 438
  -srvadmin-ipmi - 5.3.0 - 438.DUP
  srvadmin-omauth - 5.3.0 - 438.rhel5
  -srvadmin-rac4-components - 5.3.0 - 438
  -srvadmin-racdrsc4 - 5.3.0 - 438
  -srvadmin-isvc - 5.3.0 - 438
  -srvadmin-cm - 5.3.0 - 438
  -srvadmin-omacore - 5.3.0 - 438
  -srvadmin-racsvc - 5.3.0 - 438

  Do you want to 7.3.0 Server Administrator?
  Press ('o' for Yes |) 'Enter' to exit): y
  Error: Check if the server admin media are corrupt.
  If you use the Web pack to install Server Administrator,
  Make sure that you use the corresponding Web pack to the
  architecture and operating system on your system.

  #

  Yet, I am unable to reach any kind of remote web interface or web server management interface.  Please help me to get access to the management of the system.  The priority is to access the administration of two paintings by MD1000, we connected to the 6850.  Thank you

  You can try a different browser? Older versions of the iDRAC of security can do not meet the requirements of more recent browsers.