Expaning a field of text inside a table (part two)

Similar Questions

• Expaning a field of text inside a table

  Good day to all;

  I'm slowly (and I mean slowly) get the hang of the present. Now for my next question.

  I'm trying to insert 4 text fields in a table. At least 2 of the columns will have the potential for me more than a few lines.

  What I would like to ask you is the table and the text field is growing as the number of lines in a text field develops. I realize that the whole line will increase if a cell develops.

  I created a test form and add a subform that is "cast". The "Page 1" subform is also transmitted. I added a table with 2 rows and 4 columns. In each cell, I inserted a text (no label) field. For the text field, I said that it could have multi lines.

  I tried to type in the text 1 field and he did not enlarge (of course).

  Any ideas... Oh... If you're wondering why I use a table? Later, down on the form I'll have 3 sections which will be visible only if a checkbox is selected.

  If you have better ideas (and probably is), I like to know.

  Thank you all

  Chomp

  Hello

  Close to there. If you go to the Layout tab and under the height, there is a check box "Expand height '. Check this.

  Here are some examples:

  https://Acrobat.com/#d=kwa4t2vu6mXbgMCyqEF0aQ

  https://Acrobat.com/#d=X1msu65emlM10IWKxkiUyw

  https://Acrobat.com/#d=KVeR0qUe9TMd0CCRBEeFTA

  Hope this helps,

  Niall

• input field for text inside the table tree adf

  Hello
  
  I want to know, how to create a field of text within the tree adf table entry.
  
  I have three table tree of hierarchical level, places-> Services-> employees.
  
  This function I want as editable email field.
  
  can someone tell me please how to do this?
  
  Thanks in advance,
  SAN

  Hello.

  Drag table tree and try this code in your jspx

• Spacing of text inside a table cell?

  Hello, I have a question!

  I am a newbie in Web design.

  I have a site which I use a tabular presentation to design anything.

  One problem, I just fell on is when I start to add text, it seems to be very close to the edges of my cells... I know that this cell spacing is fixed, BUT when I try to add the code to the specific cell, it does not work.  When I add the code for the entire table, the cell in question works properly, BUT then ALL my cells with spacing, which is just not good at all.

  I tried to add a table inside the cell, but cannot understand the.  Any help is appreciated.  Here is my site, so you can see a Visual.

  http://www.prodigypianostudios.com

  Opinion paragraph is at the limit of the line to the left... I need to push the text inside the cell with a space.  Thank you!

  ~ Dustin

  dustinsanders1987 wrote:

  Now the only thing left is my swf file.  It's ridiculously confused me.  I don't know what happened.  I have a page linked here:

  This can be the name of your swf file-. /

  Re-insert the swf file. Click the box gray existing swf and delete it.

  Make sure that your swf file IS in your root folder, and then insert it.

  I don't know what version you saved the swf file to be compatible with, but you may need to download the most recent flash palyer to see. I don't have much experience with swf files, but I think you can save the sequence to be compatible with a range of pay earlier BECAUSE nobody's going to update their version of flash player to see your movie.

• How to replace a text inside a table.

  Hello!

  It is example code to demonstrate what I want:

  var str:String = "this @ is\nJust a\ntest and\nI @ am\nTesting."

  var a: Array = str.split("\n");

  for (var i: uint = 0; i < a.length; i ++)

  {

  a [i]. Replace("@","#");

  trace (a [i]);

  }

  What I mean is:

  @ This is

  Just a

  test and

  I'm h @

  Test

  What I EXPECT is:

  Is this #.

  Just a

  test and

  I am #.

  Test

  Any help would be appreciated please. Thank you very much.

  use:

  var str:String = "this @ is\nJust a\ntest and\nI @ am\nTesting."

  var a: Array = str.split("\n");

  var regEXP:RegExp = / @/ g;

  for (var i: uint = 0; i<>

  {

  a [i] = a [i]. Replace(regEXP,"#");

  trace (a [i]);

  }

  but you will get better performance by using split.join.  (as a general rule, only use regexp to complex manipulations that are almost impossible with the string methods.)

  for (var i: uint = 0; i<>

  {

  a [i] = a [i]. Split("@"). Join("#");

  trace (a [i]);

  }

• Delete the text of the table via loop field for

  Hello

  I have a problem to delete text added via loop fields for.

  What im do is, via loop GI dynamically create menu with 10 buttons.

  Each button contain, created dynamically, background (shape) and the text field.

  And all is well.

  But when im trying to delete text fields, then I got this error:

  -I'm using the button to remove text fields - lang_btn.addEventListener (MouseEvent.CLICK, clickHandler);

  ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
            at flash.display::DisplayObjectContainer/removeChild()
            at Loading_Img_fla::MainTimeline/xmlLoaded()
            at flash.events::EventDispatcher/dispatchEventFunction()
            at flash.events::EventDispatcher/dispatchEvent()
            at flash.net::URLLoader/onComplete()
  
  

  In the script below marked in red is what should remove the fields of text in a table, instead me gives error.

  Here's my script

  // Create for loop
  for (var i:int = 0; i < 10; i++)
  {
            for each (xml in listItems)
            {
                      if (i == xml.attribute("Id"))
                      {
                                // Add MovieClip to stage to hold the data
                                addChild(lmHolder);
                                lmHolder.x = 0;
                                lmHolder.y = 0;
    
                                // Create new MovieClip to hold buttons
                                lmButtonsMCArray[i] = new MovieClip();
                                lmButtonsMCArray[i].buttonMode = true;
                                lmButtonsMCArray[i].mouseChildren = false;
                                lmButtonsMCArray[i].x = 20;
                                lmButtonsMCArray[i].y = 20 + btCount * buttonSpace;
  
  
                                // Add each button MovieClip to lmHolder MovieClip
                                lmHolder.addChild(lmButtonsMCArray[i]);
  
  
                                // Create Background to buttons
                                lmButtonsArray[i] = new Shape();
                                lmButtonsArray[i].graphics.beginFill(lmBgColor0, 1);
                                lmButtonsArray[i].graphics.drawRect(0, 0, 230, 85);
                                lmButtonsArray[i].x = 0;
                                lmButtonsArray[i].y = 0;
  
  
                                // <<-- Add Background shape to the buttons MovieClips 
                                lmButtonsMCArray[i].addChild(lmButtonsArray[i]);
  
  
                                // Create a new array to preserve data from XML List
                                lmNameArrayEG = new Array();
                                lmNameArrayUS = new Array();
  
  
                                // Create local variable to hold
                                var lmTxtFieldContentUS:String;
                                var lmTxtFieldContentEG:String;
                                var lmTxtContent:String;
    
                                // If clicked button is EG then make array with Arabic text
                                // If clicked button is US then make array with English text
                                if (footer.lang_btn.langState == "EG")
                                {
                                          for each (var leftMenuName:XML in egLanguageList)
                                          {
                                                    lmNameArrayEG.push(leftMenuName);
                                          }
                                          lmTxtFieldContentEG = lmNameArrayEG[i];
                                          lmTxtContent = lmTxtFieldContentEG;
                                }
                                else
                                {
                                          for each (var leftMenuNameUS:XML in usLanguageList)
                                          {
                                                    lmNameArrayUS.push(leftMenuNameUS);
                                          }
                                          lmTxtFieldContentUS = lmNameArrayUS[i];
                                          lmTxtContent = lmTxtFieldContentUS;
                                }
                                // Setup new text field each time script is executed
                                lmTxtFieldsArray[i] = new TextField();
                                lmTxtFieldsArray[i].width = 110;
                                lmTxtFieldsArray[i].border = false;
                                lmTxtFieldsArray[i].wordWrap = true;
                                lmTxtFieldsArray[i].multiline = true;
                                lmTxtFieldsArray[i].selectable = false;
                                lmTxtFieldsArray[i].embedFonts = true;
                                lmTxtFieldsArray[i].antiAliasType = AntiAliasType.ADVANCED;
                                lmTxtFieldsArray[i].autoSize = TextFieldAutoSize.CENTER;
                                lmTxtFieldsArray[i].text = lmTxtContent.toUpperCase();
                                lmTxtFieldsArray[i].x = 10;
                                lmTxtFieldsArray[i].name = "lmTxtFieldName" + i;
  
  
                                // <<-- Add Text fields to the Movie Clip
                                lmButtonsMCArray[i].addChild(lmTxtFieldsArray[i]);
  
  
                                // If clicked button is EG then set Arabic text format, and make array with Arabic text fields
                                // If clicked button is US then set English text format, and make array with Egnlish text fields
                                if (footer.lang_btn.langState == "EG")
                                {
                                          lmTxtFieldsArray[i].setTextFormat(txtFormat_lm_eg);
                                          // Make array from text fields;
                                          pushEgTFintoArray.push(lmTxtFieldsArray[i]);
                                }
                                else
                                {
                                          lmTxtFieldsArray[i].setTextFormat(txtFormat_lm_us);
                                          // Make array from text fields;
                                          pushUsTFintoArray.push(lmTxtFieldsArray[i]);
                                }
    
                                // If clicked button is EG then loop thrue the for loop and remove English text fields from array
                                // If clicked button is EG then loop thrue the for loop and remove Arabic text fields from array
                                if (footer.lang_btn.langState == "EG")
                                {
                                          for (var rNr_us:Number = 0; rNr_us < pushUsTFintoArray.length; rNr_us++)
                                          {
                                                    //remove the text field array from the display
                                     removeChild(pushUsTFintoArray[rNr_us]);
                                          }
                                          //clear the array
                                          pushUsTFintoArray = [];
                                }
                                else
                                {
                                          for (var rNr_eg:Number = 0; rNr_eg < pushEgTFintoArray.length; rNr_eg++)
                                          {
                                                    //remove the text field array from the display
                                     removeChild(pushEgTFintoArray[rNr_eg]);
                                          }
                                          //clear the array
                                          pushEgTFintoArray = [];
                                }
                      }
            }
  
  
            btCount++;
  }
  
  

  If you don't know what you're doing, you can always use:

  {If (pushUsTFintoArray [rNr_us] & {pushUsTFintoArray [rNr_us] .stage)}

  pushUsTFintoArray [rNr_us].parent.removeChild (pushUsTFintoArray [rNr_us]);

  }

• Variable font inside a table cell properties

  Hello

  the following code works fine inside a text box:

  with(textArea.insertionPoints) {
       for ( var iStringSection = 0; iStringSection < stringsAndStyles.length; iStringSection++ ) {
            lastItem().properties = {
                 contents: stringsAndStyles[iStringSection].contents,
                 fontStyle: stringsAndStyles[iStringSection].fontStyle
            }
       }
  }
  

  The style changes of fonts correctly for each segment of the chain. But if I try the same thing with a table cell (just replace textArea with the active cell, stays remains the same), the fontstyle will not change between segments of the chain. Is there a different approach to reach the variable font inside a table cell styles? Without the help of a new paragraph, the police is supposed to change on the same line.

  Thank you very much!

  done with (work myCell.texts [0])?

• Fields of text stretch-why it break across pages when there is no text pushing down?

  
  I have a number of fields that are extensible in a 7 page form.  Is it possible to prevent the text field to stop on two pages, if there is not enough text inside that pushed him down to the next page?  If the text field contains only one or two lines, but the area can handle 5 before it develops. is there a way to prevent it from breaking across the row, but there remain intact and go to the top of the next page instead of snap on two pages?

  I think you need to UN check the option "allow page breaks" for the text field.

  Then, you need to consider whether this text field is encapsulated in a specific subform. If so the pagination of subform should be able to cope with this.

  It can help you to make sure that in case of overflow when the text field should go > next page or content then, sector, etc...

• Tab through the fields of text to add data

  I have no 64-bit operating system, so none of the muse-themes to create tables in the work of muse. So I created a table using text fields. I have created labels and text boxes then empty for data, I have to add. I need to be able to easily tab through the fields of text in order to add data to them. But when I hit my tab on the keyboard key ignores certain text fields. How can I fix it?

  Please refer to my answer here:

  https://forums.Adobe.com/thread/1614883

  Thank you

  Sanjit

• Text field aligned in another field of text using Muse 2014...

  My site has a text field containing an image + text legend that is pasted into another field and text aligned on the right at the beginning of a paragraph. Everything works great and it downloads and look as expected. However when I close Muse 2014 and later reopen this page, show this text box on the far left of the page in edit mode - but if I go to preview it always displayed correctly. Which makes it very difficult to change - and this technique to put a text inside a box was an Adobe recommended in a previous question and has worked well in the 'old' Muse.

  Here is the page in edit mode, and the text field with an image + text is difficult on toward the right.

  

  Here is the same page in the preview, which is how it is supposed to look like and what originally looked like the edit page:

  

  This looks like a bug to me? If you want that the Muse file please let me know how to get it for you.

  HI PV.

  Is the image + caption a group (CMD/CTRL + G) or you pasted the image in the caption text block?

  If the latter, using a group instead help?

  Thank you

  Abhishek

• BUG: CheckBox inside the table (ADF 11.1.2.1) colum

  I find a bug using box inside the table, these are the steps to get the bug.
  
  
  1. create a database table view object.
  2. create a view object clause where clause
  3. create a form of parameter (using where clause)
  4. create an editable filter enable table
  
  -AFTER THE TEST, ALL WORK
  
  5 convert inputText to af:selectBooleanCheckbox
  
  -AFTER TEST GET THIS ERROR:
  Data and tabla 1-Filter adf is ok.
  2. apply a filter by using the shape parameter and the same filter adf: time table. (The data are wrong.)
  
  
  As I say it happened only when I change my inputText to af:selectBooleanCheckbox.
  
  With inputText work well, with bad job booleanCheacBox...
  
  
  Anyone know if it's a bug in 11.1.2.2?

  Once you have converted the text, checkbox, you drop the attribute on the box again. It will ask you to map to a text with boolean value. You should have something like this in the pagedef. The filter of the table can then take these string values (true/false). Remove the validator/converter within the checkbox tag.

  
  
  
  
  
  enabled state
  Uncontrolled State
  
  

• Possibility to have a heading row when converting text to a table?

  using CS6

  Unless im having a brain lapse and giving fully on something, I think that there is no way to do that, except perhaps in script. I looked around and found no similar post everywhere or the other.

  I have all my styles of table cell / linked in the other properly I can prove it because if I'm going to get a bunch of new table everything works as I want only it.

  My guess is that the culprit of the problem is that there is no option to specify the headers (amount/location) in the conversion dialog box the text table. A simple check with box and the ability to "make the first line a header" would suffice even. I don't know how it would be difficult to modify the dialog box itself and add this option. (my guess is that its pretty difficult/intrusive to the program).

  I know that I can easily highlight the line and then simply apply the style I did for the header of the table, but the documents I did tend to have a lot many tables. This would be / is horrible to change if someone or me decides to make style changes to multiple documents.

  So my next thought was perhaps a script could help out me.

  something like:

  1. find all tables with a specified table style.

  2. change the first line for all the tables which follow the rule 1 in a header line. (For this table header cell style must be updated to take into account all that is called for in the style of table.)

  [Because table style settings have an option to specify the style of cell in a row of header inside the table, im thinking it must so far do.]

  only one problem, I fell on trying to do it manually, is that when I take a table and you try to add a header that makes him a completely new line on top of the table. So if you were to copy all text in the line I was using as a header and then paste in the newly added header line that it does not work because it keeps the style that never has been copied. leaving your only option to re-type all headers and remove all the old ones (YUCK!).

  I am open to suggestions but I confess that I don't know what anyone on the scripts.

  I understand that this is perhaps a kind of vast demand but no help is not provided and greatly appreciated!

  Thank you for your time and I apologize for the big enough position.

  Sorry, I'm bored a bresh curlly

  Now try this

  var table = app.documents [0].stories.everyItem ().tables.everyItem () .getElements ();

  for (var t = 0; table.length > t; t ++) {}

  for (var r = 0; table [t].rows.length > r; r ++) {}

  try {}

  {if(r==0)}

  for (var c = 0; table [t] Rows [r].cells.length > c; c ++)

  {

  [t] [r] table of Rows .cells [c] .appliedCellStyle = "cell Style 1.

  }

  }

  }

  {catch (e)}

  alert (e)

  }

  }

  }

• Problem in the field of text with embedded fonts

  Hello world!
  
  I have a problem with the textField with embedded fonts.
  I use symbols of police created in the library, and they work very well with dynamic textfields.
  If I do an input textfield with these embedded fonts the following problem occurs:
  
  If I set the initial value of the textfield (.text) what it is not equal to "" everything works fine. Can I change the text inside.
  But if I put .text of the textfield input at the start of an empty string, I can't have the cursor in the textfield, because it cannot receive the focus.
  If I turn the texfield false embeddedfonts, everything works well, but it I can't use fields and custom fonts are looking terrible.
  
  Can you tell me any solution? I would also use my custom in the input textfields fonts...

  Use setNewTextFormat() instead of setTextFormat().

• Change text inside a button

  I made a button with a dynamic text field on the inside and I am trying to change the text at run time, something like:
  
  for (i = 0; i < myCount; i ++) {}
  duplicateMovieClip (element, "myButton" + i, this.getNextHighestDepth ());
  This ["myButton" + i].myDynamicText.text = Description ;
  }
  But it does not work... someone can tell me what I am doing wrong?
  

  If your button is a real (non-movieclip), then flash does not use the instance name of a textfield that you place on the scenario of this button. Flash assigns the textfield instance name (something like instance43).

  to remedy this, use a movieclip button. or use the trace() function to find the name of the textfield object assigned by the flash and use it.

• Error... conditional formatting is not inside a table... not to be applied to a line

  I have a .rtf model designed in MS Word that worked well. The user has requested that negative numbers are displayed in red. The code I have below on the BI properties / Advanced tab works when I Preview in Word, but when I try to go back into the properties of BI for the field, I get the following error "the conditional formatting is not inside a table and cannot be applied to a table row.
  
  Any ideas on what could be bad?
  
  I am very new to XML, so please let me know if you need more information.
  
  Thank you.
  
  
  <? If: SUB_VOTE_VARIANCE3 = 0? >-<? end if? >
  <? If: SUB_VOTE_VARIANCE3 > 0? > <? Concat (format-number(SUB_VOTE_VARIANCE3, '#,##0'), ' ')? > <? end if? >
  <? If: SUB_VOTE_VARIANCE3 < 0? > <? attribute@InContext:color;' Red '? > <? format-number (SUB_VOTE_VARIANCE3, ' #, ##0;(#,##0)')? > <? end if? >

  Sorry for the delay,
  I just sent with solution :)