Similar Questions

• States and interactive objects

  The CP9, I was hoping that I could add a button of smart form in a form that it either back to the original object.  I'm not having a bit of luck, and now I think it is not yet possible.  Am I mistaken or did I miss something?

  Thanks in advance.

  Susan

  It is not possible to add interactive objects to a State, indeed.

• I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download.  Is it because iWeb can only support a limited number of links, hypertext, or any other reason?

  I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download.  Is it because iWeb can only support a limited number of links, hypertext, or any other reason?

  It has been much discussed.

  See my solution in this post:

  Re: Re: iWeb Publishing Solution in El Capitan

• Try to link under and an object on the same timeline in active

  Hello Flash pros, I wonder if there is a way to make a linked object to disable if another object appear above it in my swf file. Essentially by positioning the mouse on an image that covers the subject of binding, the hot spot always works that give the impression that the image which shows above it has a link. BTW, I already know how to place the image of superimposed on another scenario that the linked object is not on, but not what I'm looking for in this case, I really need the object bound to stay on the same scenario as the overlay images.

  Help, please

  Thank you

  MontyRob

  When you get home, place your ad on AS1/AS2 forum if it is not resolved for you.  Make the image a movieclip and assign him a rolling code as well.

  {run}
  this.useHandCursor = false;
  }

  Who's going to block access to the button below but disable the cursor changes to indicate the image as an interactive object.

• Jerky mouse mouseover function for all while the menu (file, options, help) and the key back/forward/home too. More scrolling is choppy every Web site.

  Jerky mouse mouseover function for all while the menu (file, options, help) and the key back/forward/home too. More scrolling is choppy every Web site since the update to version 3.6 to 4 RC1.

  Gel mouse pointer when it comes across objects that use some sort of animation or gradual highlighting when hovering on (which is basically all the Firefox 4 items menu, tabs, etc.) But also a lot of things on the Web pages as the green buttons on this page that change color when you hover over them).

  After rebooting my system, however, the problem seems to have disappeared!

  [, WinXP SP3 - 4 GB RAM, Core i5 M520, driver Nvidia NVS3100M 6.14.12.5738, Firefox 4.0]

• Placed in a Muse edge files do not work correctly and interactivity of the animation is gone

  Hello

  I just added a few files dashboard on my site from Muse via the .oam files edge creates when you publish. It is worth noting that during the preview in a browser via Adobe Edge, all the animations worked flawlessly - both in their real animations and interactivity.

  While working at the Muse, the first animation works well (although load slowly) in an excerpt from Muse, but the click to open a link action I added to this animation does not work. (Interactivity is part).

  The second animation that I did does not at all in the preview of Muse. It shows a picture, but nothing happens and seems to the interactivity went as well (this is a passage from the mouse to enable playback of a symbol element and a simple click to go to a link within the animation code).

  When previewing in my browser, several things happen: in Safari, the first animated film works, but no interactivity disappeared, just as it was in the preview of Muse. It goes the same for the second animation.

  When previewing in Firefox, the animations appear not at all. Ditto for Chrome. The image of the poster I put on Board will not even appear.

  No idea why this is happening? I built these animations that are an integral part of my web design and I'm afraid that I won't be able to use if 1) they don't work properly and 2) that they don't even show up!

  Help, please! You can find the test version of the page, I'm talking to: http://www.kristinepaulsenphotography.com/2015testsite/

  Thanks for any help you can provide.

  -Kristine

  Custom code that has been added to the div 'extreme' is not valid and prevents the execution of JavaScript on the page. Remove or fix this code and your page works perfectly.

• Captivate 8 - Slide timing and interaction

  I used to work a bit with Captivate 3 & 4 and now just got access to 8 Captivate and am currently evaluating.  I hope that someone in the community could help me with the following questions:

  1. is there a way to add more than 1 share for interaction?  In other words, I have a button that, when clicked, modifies a chart on the slide by using the 'Show' action on the success.  However, I want to repeat this action to display a video also.  Is this possible?

  2. on the same slide, above, I have a total of 5 buttons.  4 the buttons do what I mentioned in #1, but the fifth button acts more like a navigation button to move to the next slide.  I have a click box inserted for this 5th button with the option "project of break up to what the user clicks on.  However, if one of the 5 buttons are clicked, advance the slide.  Any advice?

  3. I noticed that "Allow mouse click" is grey on everything, I've gone through.  How can I activate this option?

  Thank you!

  Advanced actions can have many orders. But everything will be running at the time where the action is triggered by an event. Maybe I do not understand your question well enough? You want to show graphics and video at the same time? If you want them to appear in order, why not use the timeline?

  Regarding the second question, take a look on: Why choose Standard Simple action?-Captivate blog

  This position also has a link to a YouTube video that explains the same thing.

  Your third question is more than curious... can you give more details: you work on normal or sensitive project, it is an interactive and which object?

• Script to search for text and remove the hyperlink and characterstyle link which applies (back to normal)

  I need help with my script to search for text and remove the hyperlink and characterstyle link which applies (returns the normal text).

  I can't do either as I want.  I want the user to be able to type in a dialog text they want to search for, do search this text IGNORING case (case insensitive) and then for all instances that he find it, remove character styles that are applied to the (set to [none]) and delete the hyperlinks.

  My code seems to define the character style [None], when I click on the text and look at the window of character Styles, BUT all old styles (font color, underline) are always applied and removed not as I want.

  Also, I can't understand how to remove all of the old links.

  Here is my code:

  myDocument var = app.activeDocument;

  var noneStyle = myDocument.characterStyles.item ("[None]");

  var myFindVal = "";

  var myErrorText = "";

  var myErrorCount = 0;

  myDialog = app.dialogs.add var ({name: "search user submitted text and delete hyperlinks from objects found.", canCancel: true});

  {with (MyDialog)}

  {with (dialogColumns.Add ())}

  {with (borderPanels.Add ())}

  staticTexts.add ({staticLabel: "search and delete hyperlinks for :"}); "})

  myTextBox var = textEditboxes.add({minWidth:100});)

  }

  }

  }

  If (myDialog.show () == true) {}

  myFindVal = myTextBox.editContents;

  doSearchAndReplace();

  app.findTextPreferences = NothingEnum.nothing;

  app.changeTextPreferences = NothingEnum.nothing;

  If (myErrorCount == 0) {}

  Alert ("done! ("Part of the links have been removed for: '" + myFindVal + ""! "");

  }

  else {}

  Alert ("last error: '" + myErrorText + "' & number of errors:" + myErrorCount);

  }

  }

  myDialog.destroy ();

  function doSearchAndReplace() {}

  app.findTextPreferences.findWhat = myFindVal;

  app.findChangeTextOptions.caseSensitive = false;

  app.findChangeTextOptions.includeFootnotes = false;

  app.findChangeTextOptions.includeHiddenLayers = false;

  app.findChangeTextOptions.includeLockedLayersForFind = false;

  app.findChangeTextOptions.includeLockedStoriesForFind = false;

  app.findChangeTextOptions.includeMasterPages = false;

  app.findChangeTextOptions.wholeWord = false;

  var myFoundItems = myDocument.findText ();

  for (i = 0; i < myFoundItems.length; i ++) {}

  myRemoveHyperlinkAndStyle (myFoundItems [i]);

  }

  }

  function myRemoveHyperlinkAndStyle (myFoundItem) {}

  try {}

  myDocument.hyperlinkTextDestinations.item (myFoundItem) .remove ();

  myDocument.hyperlinkTextSources.item (myFoundItem) .remove ();

  myDocument.hyperlinkURLDestinations.item (myFoundItem) .remove ();

  myFoundItem.applyCharacterStyle (noneStyle);

  }

  {catch (MyError)}

  myErrorCount ++;

  myErrorText = MonErreur;

  }

  }

  Hello

  Right, some hyperlink might be a pageItem...

  expand the 'if' condition with:

  If (myHyp [len].source.hasOwnProperty ("sourceText") &... content ==...)

  Jarek

• menu of the screensaver and settings after upgrade 11.10. do not have a specific answer

  have more menu in the screensaver and settings from 11.10 upgrading, have not yet received a precise answer.

  Is it a matter of Firefox? or Ubuntu 11.10 issue?

  If you want Ubuntu 11.10 screen saver settings, in the far top right
  area, click the icon where you would normally be disconnect or close and select Control Panel , and then select screen.

  If you want to than the old xscreensavers return, you will need to install the
  Have a look here:
  xscreensavers in Ubuntu 11.10

• Revolution of the object and the object Cube transitions do nothing?

  I love the transitions of the 'object' - Flip Object, object Pop, object Zoom, etc. But two transitions do not seem to do anything. Revolution of object (which is new) and the object Cube (which is not) do not seem to animate anything on the slide. Am I missing something?

  Both work fine on our systems at Yosemite

• Break down and an object of a list/table of the index reference

  TestStand using I'm trying to figure out how to break down and an object reference to a table/list of the index. My sequence is attached. I received a few tips of the 3rd developer with VB code, what should be done. I'm having a problem translating in TestStand. VB code follows the description.

  I use .NET to run a 3rd party software using a sequence of imagery system and run 3rd party software tests. In TestStand, my "GetCurrentTests" approach, when an object for a specific sequence reference, returns a reference of type object ' object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand]); expected return a list of tests in the sequence of part 3.

  Next steps "GetCurrentPattern" needs to index through this list in order to get and then define and display the display model of the specific test to start the specific test. This next step class is RadiantImaging.TSEngine.ICommand (interface) and returns an object reference (radiantImaging.PatternGenerator.Patterns.Patternbase): a reference to the model.

  What I'm confused about is decaying of the 'object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand])' return value in order to provide the? indexed reference object for "Model of GetCurrent" step.

  VB code is provided below for me that shows how it can be done in VB. I'm not familiar enough with TestStand, .NET and VB to break down this >

  Any suggestions or advice is greatly appreciated.

  VB code:

  Public Class Form1

  Private PatternGenerator.IPatternGenerator MPG

  Private WithEvents mTestSequence as TSEngine.TestSequence Private Sub InitializeButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles InitializeButton.Click

  TSEngine.Settings.MeasurementSource = TSEngine.MeasurementSources.Camera

  TSEngine.Settings.SaveMeasurementsToDatabase = False

  TSEngine.Settings.SaveResultsToDatabase = True

  TSEngine.Settings.SerialNumberAllowDuplicates = True

  mPG = TSEngine.CurrentPatternGenerator

  TSEngine.Initialize ("C:\PM 4616197.rdb Calibration")

  TSEngine.Databasename = "C:\default Alpha_PEK_Date.pts".

  TSEngine.InitializeCamera)

  End Sub

  Private Sub RunButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RunButton.Click

  mTestSequence = New TSEngine.TestSequence (1)

  Dim result as TSEngine.Tests.ResultEnum

  For i As Integer = 0 To mTestSequence.NumberTests

  Dim p As PatternGenerator.Patterns.PatternBase

  p = mTestSequence.CommandList (i). Model

  p.PatternGenerator = mi/gal

  mPG.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  ' p.PatternGenerator.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  p.PatternGenerator = mi/gal

  p.Show)

  result = mTestSequence.RunSingleTest (i)

  Dim results As List (Of TSEngine.IResult) = mTestSequence.CommandList (i). Result

  Results (i). Name

  mTestSequence.CommandList (i). ResultMeasurement.

  Next

  End Sub

  Technical support solution: "I spoke with R & D and they informed me that the type of data in question is a generic class that is not supported with the .NET adapter. You can change the data type of a code module to another using a data type of object reference, but you can not manipulate the generic classes within TestStand.

  "" "" You can find this information in aid of TestStand under NI TestStand environment reference help"TestStand adapters" adapters for .NET ' adapter .NET '.NET called settings ' settings not supported. Here, the solution would be to ask a code module that performs this task for you. »

  Change the settings for call .NET

  Parameters not supported

  The TestStand .NET adapter cannot call methods and properties that have arrays as parameters in staircase or return types and does not support structures that have shredded the members of the group.

  In addition, the .NET adapter does not support creating or call methods on generic classes.

  My solution was to implement the foregoing in VB.NET from TestStand .NET adapter does not support .NET generic data types.

• When I try to open Firefox and explore, I get a menu of recommended programs and asked me to choose the program with which to open the file.

  Original title: open Firefox and explore

  When I leave early to Mozilla Firefox or Explorer, I get a menu of recommended programs and asked me to choose the program with which to open the file. When I do, I get a security warning asking if I really want to do. If I check "Run", I get redirected to the previous list, and I find myself in a circle without end. It does not matter what choice to make. Used to be that I went from starting Firefox directly.  I can get in if I have Firefox right click and choose to run the file as an administrator and then give permission to open the program. How can I cut these two additional and direct access, that I used to enjoy. I run Vista. The same thing happens if I have to explore. Would be grateful for the help.

  Hello

  1 during how long have you had the problem?
  2. don't you make changes to your computer before the problem?

  I suggest that you follow the steps below and check if the problem persists.

  Method 1:

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
  http://support.Microsoft.com/kb/950505
  Method 2:
   
  Step 1:
   
  Make SFC scan and check if this is related to missing or damaged system files.
   
  Step 2:
   
  After the SFC scan, set the file association and check.

  Method 3:

  Test the issue in a new user account .
   
  See also:
  Difficulty of damaged user account

• ASA 8.4 cleaning using Network Configuration and Service objects

  Hello

  As most of you know, firewall configurations can growth in order to be large and complex, making them difficult to understand and difficult to change.

  I have a cleaning using network firewall configuration and Service objects and groups of objects running from 8.4 who I want to. This ASA (8.4) has over 30 Web Server VM deployed behind each with the same basic configuration: one to the outside inside the IP address and port mapping (x.x.x.x:ftp to y.y.y.y:ftp, etc.) by using the following well known ports: FTP, 80, 443, 3389.

  Examples of my existing configuration:

  network of the Y.Y.Y.Y_FTP object

  Home y.y.y.66

  NAT (inside, outside) Static X.X.X.66 tcp ftp ftp service

  network of the Y.Y.Y.Y_WWW object

  Home y.y.y.66

  NAT (inside, outside) Static X.X.X.66 tcp http http service

  network of the Y.Y.Y.Y_HTTPS object

  Home y.y.y.66

  NAT (inside, outside) Static X.X.X.66 tcp 443 443 service

  network of the Y.Y.Y.Y_RDP object

  Home y.y.y.66

  NAT (inside, outside) static service tcp 3389 3389 X.X.X.66

  outside_in list extended access permit tcp any host y.y.y.66 eq ftp

  outside_in list extended access permit tcp any host y.y.y.66 eq www

  outside_in list extended access permit tcp any host y.y.y.66 eq 3389

  outside_in list extended access permit tcp any host y.y.y.66 eq 443

  The entries above for each port have to do whenever a new virtual machine is deployed behind the firewall.

  Here's my ACE project and entered the object-group service to clean up configuration.

  object-group service WWW_FTP

  Description access FTP HTTP

  the tcp destination eq ftp service object

  the purpose of the tcp destination eq ftp service - data

  the purpose of the service tcp destination eq www

  object-group service WWW_FTP_RDP

  Description access FTP RPD WWW

  the tcp destination eq ftp service object

  the purpose of the tcp destination eq ftp service - data

  the purpose of the service tcp destination eq www

  the destination eq 3389 tcp service object

  object-group service WWW_FTP_RDP_SSH

  Description access WWW RDP SSH FTP

  the tcp destination eq ftp service object

  the purpose of the tcp destination eq ftp service - data

  the purpose of the service tcp destination eq www

  the destination eq 443 tcp service object

  the destination eq 3389 tcp service object

  object-group service RDP_SSH

  Access SSH RDP description

  the destination eq 443 tcp service object

  the destination eq 3389 tcp service object

  object-group service RDP_SSH_FTP

  Access SSH FTP RDP description

  the destination eq 443 tcp service object

  the destination eq 3389 tcp service object

  the tcp destination eq ftp service object

  the purpose of the tcp destination eq ftp service - data

  object-group service RDP_FTP

  Access FTP RDP description

  the destination eq 3389 tcp service object

  the tcp destination eq ftp service object

  the purpose of the tcp destination eq ftp service - data

  outside_in list extended access allowed object-group WWW_FTP_RPD any host Y.Y.Y.Y

  outside_in list extended access allowed object-group WWW_FTP_RDP_SSH any host Y.Y.Y.Y

  outside_in list extended access allowed object-group WWW_FTP any host Y.Y.Y.Y

  outside_in list extended access allowed object-group RDP_FTP any host Y.Y.Y.Y

  outside_in list extended access allowed object-group RDP_SSH_FTP any host Y.Y.Y.Y

  outside_in list extended access allowed object-group RDP_SSH any host Y.Y.Y.Y

  The challenge lies in the consolidation of the network object entries that follow into something more condensed as the entries in the object-group service.

  network of the Y.Y.Y.Y_FTP object

  Home y.y.y.66

  NAT (inside, outside) Static X.X.X.66 tcp ftp ftp service

  network of the Y.Y.Y.Y_WWW object

  Home y.y.y.66

  NAT (inside, outside) Static X.X.X.66 tcp http http service

  network of the Y.Y.Y.Y_HTTPS object

  Home y.y.y.66

  NAT (inside, outside) Static X.X.X.66 tcp 443 443 service

  network of the Y.Y.Y.Y_RDP object

  Home y.y.y.66

  NAT (inside, outside) static service tcp 3389 3389 X.X.X.66

  Any help is greatly appreciated!

  Hello

  I'm afraid that the only part of the configuration you can really change and make more condenced is configurations ACL using configurations different ' object-group ' .

  Of course, you can also create a "object-group" for all servers that need the same ports open to further reduce the lines of actual configurations in the configuration of the CLI.

  However,.

  Regarding NAT configurations there is unfortunately no way to reduce the amount of required configurations if you use Static PAT (Port Forward) for servers. There is no way yet to ports in group for "nat" configurations.

  My question is, you have public IP addresses less at your disposal compared with the amount of different servers in your network behind the ASA?

  If you have a public IP address dedicated to each server in the network, then I suggest to use static NAT instead of static PAT. It's about the only way that the NAT configuration could be minimized.

  -Jouni

• Database objects can be replicated using Oracle Streams and which object cannot be replicated?

  Hi Experts,

  I need clarification on the sub questions,.

  
  

  Database objects can be replicated using Oracle Streams and which object cannot be replicated?

  How can we check that what schema and objects are used streams replication and which schema and objects is not used in the replication stream?

  Thanks in advance.

  Select *.
  of dba_streams_unsupported
  where owner | '.' || table_name (...)

  order by 1, 2, 3;

• grant, create and drop objects on the diagram to a role/user

  Generic question for Oracle RDBMS:

  As far as I know, there is no way for the owner of a schema privileges such as create objects, or drop objects in this schema to a user or a role.

  I know that a lot of people always asked if it is possible, and I hope Oracle will provide this capability, but as far as I know, it is not possible, even in 12.1.0.2.

  Does anyone have ideas on this?

  I considered to have developers to create programs to create tables, views, packages, etc. and then grant execute on them to the users/roles, but it would be a huge amount of work.

  Did someone come up with an easier way to do this?  Or know of a way that this can be done?

  Obviously, I can not grant create any table, index, package, view, etc., or to delete any table, view, etc., and of course we grant the DBA role.

  I thought that the 'become a user"was a solution, but it is apparently far from able to do such things.

  In our case, apparently, we have users log in with account of the owner of the schema and create objects, modify objects, etc.  (Change the objects is not a problem, because we can give everything on the object to someone.)   The problem is that we need to prevent people to connect to shared group accounts (or as the owner of the schema record) to create objects, drop objects, etc.).  We all have as their own user name and will not be able to create and delete objects in patterns of selection.

  Why must everyone CREATE and DROP of objects within the framework or the processing of information on the day the day?

  I feel a serious design flaw & conversion Orace DB.