Expansion of memory just for my P30

Similar Questions

• Memory config for Tecra 8000 PIII/500

  Can someone clarify this for me - I guess that the memory config for it would be the same as for a PC. Can I mix and match modules memory too long that I do not exceed the maximum of 256 MB. Apart from the conflict, a 133 MHz module would just run at the 100 MHz FSB speed.

  So I could add a module of 128 MB 100 MHz for the standard 64 MB DIMM equipping the Tecra 8000 do 192 Mb or a single 256 MB 100 MHz module... OR 2 x 128 MB...

  Thank you very much

  Hello

  as far as I know the Tecra 8000 has no FSB 100 speed!

  So pay attention to your turn to mixture.

  There are a few Tecra 8000 who BusTyp: 66 MHz Front Side Bus (1.6 volts).

  Good bye

• Get the DLL string (memory allocated for DLL)

  Hi, I'm aware there are a lot of discussions around this topic, but there are a lot of variations and I've never used before LabVIEW, and I seem to have a hard time at a very basic level, so I hope someone can help me with the below simple specific test case to put me on the right track before I pull my hair remaining.

  I've created a DLL with a single function "GenerateGreeting". When it is called, it allocates enough memory for the string "Hello World!" \0"at the pGreeting of pointer, copy this string to the pointer and sets the GreetingLength parameter to the number of allocated bytes (in the DLL in the end, I want to use, there is a DLL function to free the memory allocated for this way).

  I created a header file to go with the DLL containing the following line.

  extern __declspec(dllimport) int __stdcall GenerateGreeting(char* &pGreeting, int &GreetingLength);
  

  I then imported the LabVIEW file using the import Shared Library Wizard. That created a "generate Greeting.vi' and everything seems somewhat sensitive for me (although this does not mean a lot right now). When I run the vi, the ' GreetingLength on ' display correctly '13', the length of the string, but "pGreeting out" shows only three or four characters (which vary in each race), place of the string that is expected of junk.

  The pGreeting parameter is set to the 'String' type, the string "String pointer C" format, size currently Minimum of 4095. I think the problem is that the DLL wants to allocate memory for pGreeting; the caller is supposed to pass a unallocated pointer and let the DLL allocates memory for the string the right amount, but LabVIEW expected the DLL to write in its buffer préallouée. How to with LabVIEW? Most of the functions in the DLL in the end, I want to use work this way, so I hope that's possible. Or I have to rewrite all my DLL functions to use buffers allocated by the appellant?

  The vi , header and the DLL are atteched, tips appreciated. Edit - cannot attach the dll or the headers.

  tony_si wrote:

  extern __declspec(dllimport) int __stdcall GenerateGreeting(char* &pGreeting, int &GreetingLength);
  

  Although char * & pGreeting is actually a thing of C++ (no C compiler I know would accept it) and this basically means that the char pointer is passed as a reference. So, technically, it's a double referenced pointer, however nothing in C++ Specifies that reference parameters should be implemented as a pointer at the hardware level. So free to decide to use some other possible MECHANISM that takes the target CPU architecture support a C compiler constructor. However, for the C++ compilers, I know it's really just syntactic sugar and is implemented internally as a pointer.

  LabVIEW has no type of data that allows to configure this directly. You will have to configure it as a whole size pointer passed as a pointer value and then use a call MoveBlock() or the support VI GetValuePtr() to copy the data on the pointer in a string of LabVIEW.

  AND: You need to know how the DLL allocates the pointer so that you can deallocate it correctly after each call to this function. Otherwise you probably create a leak memory, since you say that the first 4 bytes in the returned buffer always change, this feature seems to assign to each run of a new buffer that you want to deallocate correctly. Unless the DLL uses a Windows such as HeapAlloc() API function for this, it should also export a function according to deallocate the buffer. Functions like malloc() and free() from the C runtime cannot always be applied in the same version between the caller and callee, so that calling free() by calling on a buffer that has been allocated with malloc() in the DLL may not work on the same segment of memory and result in undefined behavior.

• stick of memory recommended for Xperia V

  Hi guys. IM Francis of the philippines and again on the forum. Planning to get a gift this Christmas and IM will expand my memory 16 GB or 32 GB. I want to just ask you guys what may be the best memory card for my xperia v? Given brands, ability or what can be considered. Hope you guys can help me. Nice day!

  On a portable way, class 10 won't make much difference for mobile use, but can have a significant advantage if you want to transfer files from/to the memory card, often using PC.
  Capacity maximum support, the official recommendation is 32 GB, so it is supposed to slow down not to phone in anyway, even if no one can really guarantee that.

• How can I unlock the memory card for camera hp photosmart to m11

  Hi, just need to know how to unlock a memory card for a camera HP photosmart m22. Attempt of deleting photos to the card and don't have any chance. Get locked memoru card message

  Hello

  Could be that the card has been locked. Check the lock on the left side of this image (the white end cap), then unlock it.

  

  Kind regards

• The amount of space (memory) required for the good functioning of Firefox?

  The amount of memory required for the operation of Firefox? Trying to decide between IE and Firefox. Research in the new computer and need to think about which browser to use, and how much space it needs to work properly.

  You need no more than 40 MB for the operation of Firefox.

• Is there a forum just for the HP - 50 g?

  Hello, I'm new here. Is there a forum or a thread just for the HP - 50 g?

  Thank you.

  Hello

  It is not a forum dedicated to the 50G, but you can see the following forum:

  http://h30499.www3.HP.com/T5/calculators/BD-p/BSC-408

  Also, are you aware of a very useful site for the 50G (and the previous 48 series):

  www.HPCalc.org

  Concerning

  BartdB

• Satellite A100-159: expansion of memory RAM problem

  Hello

  I have a satellite A100-159. I want to increase the RAM to 2 GB. I checked the type of memory that is supported by the laptop and ordered two modules PC4200 DDR2 SO-DIMM 1 GB of the brand 'Buffalo '. I have after installing the memory and the laptop starts fine (and detects the 2 GB of RAM). However, Windows XP always freezes after login. I reinstalled the original modules and everything works well again.

  After that, I installed both modules in other non-Toshiba laptop and here they work perfectly. I know that Toshiba recommends using some partnumbers, but if the modules work fine in another laptop computer why it does not work in the A100?

  Recommended modules are almost two times more expensive. If Toshiba wants to make money by forcing people to buy expensive pieces, I will never buy a Toshiba again...

  Secondly, is it possible to use DDR2 SO - DIMM 667 modules (these are less expensive than 533 modules)?

  Kind regards
  Martijn

  Hello

  > is it possible to use DDR2 SO - DIMM 667 modules (these are less expensive than 533 modules)

  Yes, it should be possible to use the modules of 667 MHz, but generally, they should be more expensive than 533 MHz modules. Of course, modules WITHOUT name are always less expensive than brand Kingston or Toshiba memory modules.

  > Recommended modules are almost two times more expensive. If Toshiba wants to make money by forcing
  > people to buy expensive pieces I will never buy a Toshiba again.

  Don t think that they will be forcing anyone to buy expensive parts. but as already said, the brand modules cost more expensive form of low quality modules. The performance of these modules is poor. If you want you can read some computer magazines and find the tests.
  They compare the performance of simple modules. So for me it makes no sense to buy a module without name of 667 MHz because for most a brand module 533 MHz is faster and better as module 667 MHz without a name.

  I use Kingston modules in my laptop satellite and I'm happy.
  Found this site with compatible memory modules for your laptop:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=23148&ft=m&St=3

• I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

  My last similar attempt on another machine resulted in a very slow computer.

  Thanks, Ron

  Apple says the following:

  General requirements

  • OS X 10.6.8 or later version
  • 2 GB memory
  • 8.8 GB of available storage

  For best performance, I would say not less 4 GB and preferably 8 GB or more.

  Your i5 is well able to support properly.

  http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

• HP Pavilion 15-n048: maximum memory allocation for HP Pavilion 15-n048

  Does anyone can tell me what is the maximum memory loss for HP Pavilion 15-n048

  Officially, 12 concerts. See the owner's manual here:

  Link repair manuals

  See page 47. Pavilion 15 manuals are often a bit difficult to understand, does not mean that they are sometimes a bit misleading. Some models are configured with one or two memory locations, so the first thing I would do is to open the Bay of memory and see if there are 2 slots for sure. Your laptop came with a single module of 8 GB DDR3 - 1600, then the question is whether you have an open slot. If so, the specs say you can add a module of 4 GB of the same speed and type. Others have reported success with the addition of a module of 8 GB for a total of 16 concerts. Attention to the black blocks how are on the side of the module that you already have. 8 unlikely, what makes low density. Get the same module 8 GB or 4 GB.

  Post back with any problems.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I can't find the drivers for the chipset just for my netbook

  Hi guys,.

  I can't find the drivers for the chipset just for my netbook (samsung NP355E5C-A01)

  the netbook has amd chipset A40/A50 series FCH

  Southbridge A55/A60M

  the news come from cpu - z...

  pls help ASAP!

  Hello:

  These should be the chipset drivers you need. First download listed.

  I missed the screen for W7.

  Simply choose a different tab if you use something else.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

• I feel just for the Indian

  I feel just for this Indian scam and I actually let him use my computer, im concerned about my stuff that I have. I have no credit card info but address and phone things and others. What should I do? I'm really interested please help! What should I do? Just let you guys know I got to the place where they needed to get paid for their services, but I refused I'm sure?

  The only way to be sure is to save essential documents, music, pictures, etc and then wipe your computer and restore it back to the State nine factory.  While connected the scamers would have done anything, installed anything, read something on your system.

• Double-click to open a Word or Excel file crashes just for centuries before opening it later.

  Recently, by double clicking on a file name to open a Word or Excel file, my PC crashes just for centuries before opening it later. Text files, PDF, jpg files and other open immediately, no problem. I have not changed the Word/Excel software recently and the extensions.doc/.xls file are correctly associated with programs. Why don't double-click work properly?

  Open Word/Excel and then use the file - dialog box open to open a file.

  Which causes the same delay?

• How to create the icon on the desktop just for SilverLight?

  How to create the icon on the desktop just for SilverLight?

  Hello

  • Why is it you are wanting to create a shortcut?
   
  Silverlight is a plugin for Internet Explorer and other browsers, Windows Media Center is to allow video playback which supports silverlight. You cannot create a shortcut for the same.
   

• I need a memory stick for my trv520 camcorder. Nothing great. Small capacity is good.

  I need a memory stick for my Sony trv520 camcorder.  I would like to take advantage of this feature to camcorders. I've never had the memory stick since.

  Please email if you can help me.  I tried everywhere wherever I can think.

  [email protected]

  Hello and welcome to the community of Sony.
  Thank you for your message.

  You can use a 32 MB or 64 MB or 128 MB Memory Stick with the camcorder.
  However, a 32 MB PSP Memory Stick can also be used.

  See the following link for compatible cards Memory Sticks with the camcorder.
  http://eSupport.Sony.com/us/Perl/support-info.pl?&info_id=11&MDL=DCRTRV520

  Thank you.