Experience with A / V Cable for the view?

Similar Questions

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• problem with my laptop asking for the administrator password or power on password

  I have the same problem with my laptop asking for the administrator password or power on password. It is a compaq presario cq61. It happened when my hard drive failed and was not used for a long time. With the password, any help would be much appreciated. It says system turn off after a few trials with the key: 55427586

  Hello

  Try to enter: 40585508

  Kind regards

  DP - K

• I payd with my credit card for the CC costumes... why can I only download trial versions?

  I payd with my credit card for the CC costumes... why can I only download trial versions?

  Hi APS investment.

  I checked your account and I see that you have subscribed for the creative cloud for teams in which you have a license that you have assigned to the same Adobe ID, but the invitation is still not accepted.

  In order to activate the license, please accept the invitation of your receipt for the same email, then sign on the CC from Adobe and reconnect.

  Sign in, sign out | Creative office cloud app

  Kind regards

  Sheena

• Hi, just sign for a package monthly, received a message from the Bank that I already paid with my credit card for the first month, but I received no email / can not see the plan when I connect.

  Hi, just sign for cloud of plan monthly photoshop, has received a message from the Bank that I already paid with my credit card for the first month, but I received no email / can not see the plan when I open a session.

  There is no serial numbers for products Creative cloud,

  Sign out of Creative Cloud App and sign in the back once

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  If the trial warning still appears, then make sure your hosts file once entries

  Log, activation, or connection errors. CS5.5 and later versions

• OK so I connected my iPhone 5 s for my Macbook Pro with a USB cable, but the system settings it is NOT CONNECTED, even if it triggers iTunes to open. Do not get internet connection on the MAC how come the system settings shows USB not connected

  I connected my iPhone to my Mac using a USB cable, but the Mac connected USB not appear, even if iTunes opens

  The Mac has no network to the internet via a port USB, WHY NOT?

  Where in the Panel are you looking for? And what you're trying to do with the phone? Transfer files? Share an internet connection?

• connection for printing from a computer wireless with a connection cable to the router usb printer?

  Produst name: HP Officejet Pro L7555.

  Works with Windows 7.

  A new router and the modem was installed when Comcast installed our wireless connection.  This of course did not work with the current setting of the printer.  The printer is connected via USB cable to the router.

  Are you sure it's a USB and not an Ethernet cable?  I bet it's in the affirmative:

  1. disconnect the Ethernet cable.

  2. on the printer: Setup > network > default settings.

  3 reconnect the Ethernet.

  Now, remove the printer in Control Panel > devices & printers, then add it again like this:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• docking stations for the view

  Sansa claims the im413 Altec Lansing is compatible with the view.  He also had a remote control and FM, these two elements I want.  However, I called Altec Lansing and they did not like being reported as being compatible with the view because it has not been tested.  I emailed Sansa about this and they told me to call their 866-726-3475 tech support number, which I frankly don't believe that they are particularly useful or well informed.  Once, when I called they told me to download the software for something else, that I wonder. Well, that didn't work and I called again and was told by another representative of different to use software. Why aren't all on the same page?

  In any case, I would be grateful if someone had actual experience with the view using a docking station where I can use the remote control and FM.

  Thank you

  Hello

  I have the iM413, and as long as you are ready to use the new firmware, then it will work fine...  All functions of work, on the remote and the player himself...  Not to mention that the systems sounds GREAT!

  Just buy it already!  You will not disappointted...

• "Tell me why I want to have a separate group for the view? -Mr. customer

  Hello, my name is Mr. Customer.  My VAR tells me I shouldn't run VMs Office through the view on the same hosts and in the same cluster as my server of virtual machines.  Now, I know that normally licenses VMware makes it easier to just buy view with ESX and vCenter, but I did not follow the rules and actually wound up overpaying some licenses. I did not violate any point of the EULA and I want technical answers, why so I can make the right decision and buy a new hardware and do the work stations my users to shine.

  Signed, Mr.Customer.

  Hello, I am of the VAR and I gave my client some reasons including: better sharing of resources, windows failure, more flexible less impact in the event of power failure, streaming and e/s memory management.  I want to hear from you guys, what do you think?  The best answers are those of our community, so we'll have em and I thank you in advance.

  I don't have the same experience as you all. I am the user as your customer. I separated into two different groups. I think that the point is the priority and dedicated resources. I would not want desktop computers in my Accounting Department (sending of junk e-mail to friends all day) using resources and slow down my accounting system, my e-mail server and important functions. Memory seems to be the first resource exhausted and can accumulate with view. In my office cluster, memory gets sucked upward, long before any amount of CPU is affected.

  At the same time, I have the idea to combine in my DR site so that they can share resources. It's really because I hope I never need this side DR of it but have some resources available for it. This would allow me to work (even if disabled) and resources for an interim period.

  I'm smaller in the sense that I don't have a server and a division of the office. I imagine that your client is not, or they would not think to combine desktop and server computers. And it would be really defined each arm pointing the finger the other problem they have at all.

  Dave

• Help with static IP address for the WRT54GL by EZXS55W

  Hi all!

  I'm having some trouble network at the office and cannot keep close internet for all the world just try a new mode of connection of the cables.

  We recently received a notice on five new static ip addresses for the office, we did turn on DHCP those for a year now.

  We have a basic network requiring no credentials of the modem or connection.

  At this moment we have a network cable straight from the network on the router (WRT54GL) failure. Then, the router is defined in gateway mode and uses one of our static Ip addresses.

  I wanted to connect my server to the same fault, but using the static IP address, so I thought why not do it through a switch.

  So the network failure, I ran the right network cable into the uplink on the switch (EZXS55W) connector and then put the router in port 1 and my server port2. Both connected with the right cables.

  The Internet light on the router does not light and the switch just flicker light now and then.

  Maybe someone here can help me how I should put up to get to the top and running, what do I have to configure something special on the router or maybe somewhere use twisted cables.

  Please I need your help!

  Thanks for the help and you where once there was something wrong along the way.
  I tested my switch before trying this, but apparently it is now broken.
  I borrowed another switch of a friend and everything was up and running in a few seconds.
  So now I just need to buy a new switch and everything will be fine.
  Once agan, thank you...

• Problems with static IP setting for the port forward through 2 routers

  I currently have cable internet connected to a router (Linksys E2000 w / v1.0.03 firmware). This router is connected to another router, a Linksys E3200 with firmware v1.0.02. In order to correctly forward ports through the E3200, I understand that I need to set up a static IP address on the router.

  I almost followed the steps in this video, but when I enter all the IP addresses for the static IP address settings, it allows me to access the router configuration page. I try to get the new IP address that I gave (which he tries to move automatically once I have save settings) and the connection times out. I am able to access internet otherwise, however. From here, I have to do a factory reset on the router and start from square one.

  Anyone have any ideas? I'm quite frustrated and would like to get ports forwarded so I can get my server properly set in place.

  1. If it has connected LAN - LAN you will need to disable the DHCP server on the E3200.

  2. the best option would be to use the 'bridge' on the E3200 mode (in the latest firmware) and connect the internet port to the main router.

  3. If connected LAN - LAN (or in Bridge mode) all internet related functions on the E3200, including ports are not relevant. There is no need to set up the port on the E3200 redirects. All shipping is done only on the E2000 and nowhere else.

  4. What is the address LAN IP of the E3200? What is the address LAN IP of the E2000?

• X 64 Vista - Home Premium SP2 - game Second Life-need to create 2 folders to destination AppData or separate directories for the Viewer 1.23 and 2.2 caches

  I'm not a developer or a tech: only second life 1.23 is loaded on the computer – no productivity software. I need to create 2 folders to separate destination (or directories) to the SL Viewer 1.23 and Viewer 2.2 caches.  Right now the 1.23 cache is stored in the folder AppData/Local.  When 2.2 is downloaded, it will not replace 1.23, but things & Stuff Blog of Nalates Wordpress (also a contributor to regular Forum SL) recommend to around 2.2 to another 'file' or 'directory' cache (before the opening of 2.2 for the 1st time) to prevent the inventory and avatar problems loading again (when I had 2.1 load on the computer with 1.23) when I switch using the Viewer 1.23 and Viewer 2.2.  I don't know how to do this, but reading the wiki in Second Life in caches that directed me to the website of Microsoft, it seems that I need to get/use one command Linkd.exe which is part of the Windows Server 2003 Resource Kit Tools - but a note on the site of Microsoft for the Kit, under requirements of the States that the Kit is not supported supported on 64-bit platforms.  What to do please?  TY

  Hello

  a. go to the Preferences tab which displays your location of the cache.

  b. click on the 'Browse' (viewer 2.0) or the button "Set" (Viewer 1.23), create a new folder in a convenient (for example on your desktop) and select the folder to be your new location of the cache. Relog.

  c. This will give you a nice clean cache folder and do delete everything out of it easier in the future. If you use 3rd party clients, such as the Kirstens display, you might want to give them a separate folder, if they themselves (for example, Kirstens viewer uses "s20 C:\Users\yourusername\AppData\Local\Kirstens")

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Modification of the update this message app for the Viewer to the company

  We created folios for a later version of the DPS, but some of our users still had an older Viewer.

  The message they get is that they need to go to iTunes to update their app. But it is a business application, and we do not distribute via iTunes.

  How do I change the update message to direct users to our download page?

  All strings in the viewer can be customized with the App Builder. See http://helpx.adobe.com/digital-publishing-suite/help/create-custom-viewer-app-ipad.html and search for "using custom Strings. The setting is on the details page of the application under Advanced settings in the lower part.

  Neil

• Im trying to sinc my email contacts from my iphone to my new computerhow I can do I pluged my phone in my computer and he asked to do it but sinc everthing contacts im having a hard time with windows 10 is for the younger generation

  I am trying to sync my contacts from my iPhone to my new computer email how I do I plugged my phone into my computer and he asked to do everything but synchronize the contacts that I have a hard time with 10 windows, that's for the younger generation

  If you synchronize contacts using iCloud, you cannot synchronize them in iTunes. More information would be useful.

• power cable for the second in p6280t dvd player

  I installed a second dvd drive in my hp p6280t.  It came with a SATA cable, so it's no problem.  However, HP instructions State, "connect the data and cables to the back of the unit of energy...» "Problem - I can not find a power cable to plug into the second disc.  Can anyone help?  Thank you.  Mike

  Mike,

  All you need is an adapter (delivery free $2.29).