explanation of the syntax of reminder

Similar Questions

• Explanation of the BR

  Hi all
  
  First post - please, be gentle.
  
  I'm looking for an explanation of the syntax for code in a BR (we had consultants in the development of our system and I'm trying to tackle some of the rules they put in place, in the hope that someday, someone will pay me 1 trillion pounds per day to do the same for them.)
  
  There was some patches previously, definition of the members of the entity at the lowest level.
  
  The code as follows:
  
  "xxxx" * @MEMBER (@CONCATENATE (@SUBSTRING (@NAME (@PARENT (@CURRMBR ("Entity"))), 0, 4), "undisclosed")) *-> "xxxx".
  
  
  From what I can understand:
  XXXX will be multiplied by a member % undisclosed
  The % is generated by taking the entity dimension, using names of members of the Parent of the level 0 of entity members (as previously set) and the first 4 letters of the name of this member - I can see that the substring is working with 0 and 4. is it just the starting point (0) and (4) endpoint of the text to take?
  
  Making all that noise OK?
  
  I am compiling slowly my own list of orders with explanations as I work through the rules (from Internet research) and own understanding, are downloads Oracle my best bet for this?
  
  Anyone has the text of "look more intelligent that you are" for Essbase 11? Ask you to stick on the list for Santa...
  
  Thank all the time to answer.
  
  JB

  Hello

  The syntax below, it does the following
  1 CURRMBR returns the current entity specified in your fix
  2 PARENT returns the Member of the Member's parent returned by 1.
  3. NAME converts the Member returned by 2 to use as a parameter to substring
  4 SUBSTRING(your_member_name_here, 0, 4) returns 4 characters of your_member_name_here from position 1. So if your string is "your_member_name_here", the result will be "your."
  5. CONCATENATE will add 2 strings together, in your case, this is what is returned by 4 and "undisclosed".
  6 MEMBERS converts the string returned by 5 back to Essbase member since the form requires Essbase member to use and not a string.

  I've seen excerpts of the book Look more intelligent and it seems to be a good start for beginners.

  HTH,
  Gerd

• Component-level IP: generate and check the syntax error

  I tried to create a component for my device myRio level IP. I encountered this problem:

  File level information extraction superior synthesis. Please wait...
  
  Processing files...
  
  Vivado Simulator 2014.4
  
  Copyright 1986-1999, 2001-2014 Xilinx, Inc. All rights reserved.
  
  Running: C:/NIFPGA/programs/Vivado2014_4/patches/AR62969/vivado/bin/unwrapped/win32.o/xelab.exe xil_defaultlib.conf3B887A0FF22442ACAD7559670A4D090A-L xil_defaultlib-L unisim-L unimacro-L xilinxcorelib-L secureip-snapshot dll high - prj - clipsyn.prj
  
  Multi-threading is on. Using 6 son of a slave.
  
  Determine the order of compilation of HDL files.
  
  INFO: VHDL file analysis of [VRFC 10-163] 'C:/NIFPGA/iptemp/clip6BEF358BFCFF45AD8C68F5AB63F88A19/top.vhd' in the xil_defaultlib library
  
  INFO: [VRFC 10-307] analysis top part entity
  
  INFO: VHDL file analysis of [VRFC 10-163] 'C:/NIFPGA/iptemp/clip6BEF358BFCFF45AD8C68F5AB63F88A19/clock_div.vhd' in the xil_defaultlib library
  
  INFO: [VRFC 10-307] analysis feature clock_div
  
  INFO: VHDL file analysis of [VRFC 10-163] 'C:/NIFPGA/iptemp/clip6BEF358BFCFF45AD8C68F5AB63F88A19/pwmbuffer.vhd' in the xil_defaultlib library
  
  INFO: [VRFC 10-307] analysis feature pwmBuffer
  
  From static development
  
  Completed the static development
  
  Starting analysis of simulation data flow
  
  Filled with simulation data flow analysis
  
  Resolution for the simulation time is 1ps
  
  Compile the std.standard package
  
  Compile the ieee.std_logic_1164 package
  
  Compile the package ieee.numeric_std
  
  Compilation of behavioural architecture of the entity xil_defaultlib.clock_div [\clock_div (40000000,400000)------]
  
  Compilation of behavioural architecture of the entity xil_defaultlib.pwmBuffer [pwmbuffer_default]
  
  Compilation of behavioural architecture of the entity xil_defaultlib.top [top]
  
  GCC.exe: internal error: abandoned (collect2 program)
  
  Please submit a bug report.
  
  to get instructions.
  
  Correct the above error and check the syntax again.

  I have labview 2015 and vivado 2014.4 running on windows 8.1. Thank you in advance.

  Thank you for your response.

  I solved the problem. It is apparently caused by minGW installed with 14.4 vivado which does not work with windows 8. So, I replaced the minGW on vivado record 14.4 with the latest version of minGW.

• Spice up the syntax of the format rules

  Is there a document that explains the difference between the general syntax of SPICE and syntax of Multisim? I tried to read the Guide to using SPICE simulation, but the link takes me to an ad of Multisim 11. Then when I search the manual I loop back to the same place. Annoy her.

  When I import a file SPICE, I would like to know which statements will be valid. Including summaries of the study.

  Thanks in advance.

  Hello

  There is a page in the Multisim help file that highlights the difference between the syntax of Multisim SPICE and other Spice (PSPICE and XSPICE) syntaxes. To find this page, follow these steps:

  1. In Multisim, click Help > Multisim help
  2. Click the contents tab. If you use Multisim 10.1, the help topic can be found under the Multisim SPICE reference. If you use Multisim 11, the help topic are under Simulation > Multisim SPICE reference

  Generally, the study summaries are ignored by Multisim. To set your analysis, you need to click the menus available through simulation > Analyses.

  Hope that helps.

• Spreadsheet Excel add after the syntax

  I have a large application that creates a report following a test.  The report is about 250 pages, each page represented as a group in the data portal.  When we deliver him customer report also wants an excel file with pairs of X - Y data for each of the graphs in the report.  I know how to make the selection of the data and copy/paste it to Excel.  Where I encountered problems, that's when I add worksheets in Excel, I can't figure out how to run the new worksheet to add at the end.

  According to the news on Excel VBA, there are parameters before and after that should allow you to do.  I can't quite understand the syntax to include these parameters.  The line of code in question is red.

  If you have nothing but the. Add the statement that the code works but the worksheets appear in reverse order.  I tried a number of different ways, and the script just dies without even showing an error.  I know one around which we work to scroll the list of the groups back, but that's not fair to sit well with me.  I prefer to do things in a logical manner, being from the first to the last.

  If there are questions please let me know.

  Thanks in advance.

  Wayne

  FilePath = autoactpath & "\dataoutputtemplate.xls".

  ExOpen = True
  Nomclasseur = NameSplit (FilePath, "N") & ".". XLS '.
  On Error Resume Next
  Set Excel = GetObject (, "Excel.Application") ' get Excel via OLE if it is already open
  If Err.Number <> 0 Then
  Err.Clear
  Set Excel = New ' start Excel via OLE
  If Err.Number <> 0 Then
  ' Exit Sub
  End If
  ExOpen = False
  End If
  Excel.Visible = true
  IsWorkbookOpen = Excel.Workbooks (WorkBookName) there's nothing = False
  If ExOpen then
  If not IsWorkbookOpen then
  Set ExcelWkb = Excel.Workbooks.Open (FilePath) ' open the Excel file if it isn't already
  End If
  on the other
  Set ExcelWkb = Excel.Workbooks.Open (FilePath) ' open an Excel file from excel is not already open
  End If
  Err.Clear
  On Error Goto 0

  GrpStart = GroupIndexGet ("Globals")
  NumGrp = GroupCount - GrpStart
  ReDim PageList (NumGrp)
  ReDim SectList (NumGrp)
  b = 1
  c = 1
  for a = GrpStart to GroupCount
  CurGrpName = GroupPropValGet (a, "name")
  If InStr(CurGrpName,"List") then
  SectList (b) = Mid(CurGrpName,5) ' remove 'List' in the name of the group to be used in the Table of contents
  b = b + 1
  End If
  If InStr(CurGrpName,"_") then
  PageList (c) = CurGrpName ' Gets a list of groups that should be exported
  c = c + 1
  End If
  Next "(a cycle through groups can gather names)
  ' Add the Table of contents: sheet in workbook
  Set ExTOC = Excel.Workbooks (WorkBookName). WorkSheets.Add
  ExTOC.name = "Table of contents".
   
  For d = 1 to c - 1 ' c is the number of valid sheets in the report which will be exported
  Set ExcelSht = Excel.Workbooks (WorkBookName). WorkSheets.Add (after: = last sheet in the workbook)
  ExcelSht.Name = PageList (d)
  Next would then report to export page

  Hello Wayne!

  What you need to know, is that you can leave empty parameters. The solution to your problem is:

  Set ExcelSht = Excel.ActiveWorkbook.WorkSheets.Add (, Excel.ActiveWorkbook.WorkSheets (Excel.ActiveWorkbook.WorkSheets.Count))

  Matthias

• What is the syntax and command options registry RegKeyDel?

  What is the syntax and command options registry RegKeyDel?

  http://multicommander.com/docs/MultiScript/functions/registry

  That's all I found (in English).

  SC Tom

• The syntax appropriate - Src-Addr filter IPS Signature Tuning

  Anyone know what the proper syntax to set the Src and Dest addresses in a Signature? I try to set the default value varies from Private IP as addresses of CBC in signature 3030 and get errors about the syntax.

  I have tried ip/netmask and set the netmask 255.255.0.0 as and so forth.

  Use a hyphen. So to filter all the 192.168.0.0/16 address:

  192.168.0.0 - 192.168.255.255

• How can I correctly write the syntax format to enable check on in the command prompt

  How can I correctly write the syntax format to enable check on in the command prompt

  How can I correctly write the syntax format to enable check on in the command prompt

  Type

  check /?
  
  
  to see the correct syntax (the same as for any other command console).

• Problem with the syntax to call a page Apex

  I display 5 faces changing mood of a table. Each face has a link stored in the table. The link should go to a page in the same application and pass a parameter to this page when the face is selected.

  Somewhere, there is a problem with the syntax of the link, can anyone please help me out with the correct syntax, please.

  The error that I get when I select a face, is the following:

  

  The link entry in the table is the following: http://apex.enciva.co.uk/pls/apex/f?p=842:1: & SESSION.: P1_MOODID:1

  and the code to display the faces, is as follows:

  DECLARE

  BEGIN

  FOR (IN) c1

  SELECT Hmauin,

  mntitle, mnlink

  OF MOODYFACES

  WHERE NVL ((mnfilename) dbms_lob.getlength, 0) > 0

  AND mnactive = 'yes '.

  ORDER BY HMAUIN

  ) LOOP

  HTP.prn ("< a class ="dock-item"HREF ="'|) C1. MNLINK | "" ">

  < img src = "f? p = & APP_ID.: & APP_PAGE_ID.: & APP_SESSION.:APPLICATION_PROCESS = GET_IMG1:NO:P141_MNID:' | C1. HMAUIN | "" "alt =" "/ >

  < span > ' | C1.mntitle | / span > < /a > ');

  END LOOP;

  END;

  Any answer will appreciated.

  Thanks fac586, spawn the link works perfectly.

• How descriptions or explanations of the rules and easily accessible rulesets for the end user?

  When rules/rulesets are not configured to run on record in forms, users must run manually, either via the form or via the Tools-Business Rules (BTW: aren't fair rules now that CalcMan is forced?).

  Is there a way to users could easily access a longer description of the different rules and rulesets?  I like that we can add accessible instructions for forms of data, but I can't seem to get more planning than the 'name' of rules / rulesets with the role of Planner.

  There is not a Lane exit from the box to provide a textual content on run from the section of business rules management rules.  There is a way of comments, instructions and explanations in the rule to put, but a user would need to go in Calc Manager to access.  It can also be given on the forms that you mention, and finally, instructions and explanations can be given text information using Task Manager so users will run the business through this interface rule.

• What is the syntax to create segments?

  Hello

  segment can be created manually as table space? If Yes, what is the syntax to create the segment?

  Concerning

  The create table statement has a storage clause that is part of the clause of physical attributes.

  These clauses to define options for the creation of segment/measure. If you do not specify the storage clause, then the tablespace-level settings are used.

  Documentation of the CREATE TABLE statement

  Physical properties: https://docs.oracle.com/database/121/SQLRF/statements_7002.htm#i2126711

  {[deferred_segment_creation] [table_compression] segment_attributes_clause}

  [inmemory_table_clause] [ilm_clause]

  | [deferred_segment_creation] ORGANIZATION

  {Heap_org_table_clause BUNCH [segment_attributes_clause]

  | INDEX index_org_table_clause [segment_attributes_clause]

  | External_table_clause EXTERNAL

  }

  | CLUSTER cluster (column [, column]...)

  Segment attributes clause: https://docs.oracle.com/database/121/SQLRF/statements_7002.htm#i2214991

  {physical_attributes_clause

  | TABLESPACE tablespace

  | logging_clause

  }...

  {Clause of their physical characteristics: https://docs.oracle.com/database/121/SQLRF/clauses007.htm#SQLRF30011}

  [{ PCTFREE whole

  | Whole PCTUSED

  | INITRANS whole

  | storage_clause

  }...

  ]

  Term of storage: https://docs.oracle.com/database/121/SQLRF/clauses009.htm#CJACEJGB

  
  

  STORAGE

  ({ INITIAL size_clause

  | Size_clause NEXT

  | MINEXTENTS whole

  | MAXEXTENTS {integer |} UNLIMITED }

  | maxsize_clause

  | PCTINCREASE whole

  | Whole FREELISTS

  | FREELIST GROUPS around

  | OPTIMAL [size_clause |] NULL ]

  | USER_TABLES { KEEP |} RECYCLE | DEFAULT }

  | FLASH_CACHE { KEEP |} NO | DEFAULT }

  | ENCRYPT

  } ...

  )

  However, the create table statement lets you not create segments or extensions directly. New extensions are to be created initially (when the table is created) or later, when more space is needed for the table, usually after several insertions that filled the original measure.

  Also remember that SQL is a language of generation 4. But there is no need to go into details such as the management of use or storage. All that and managed by the RDBMS.

• Creating HTML dynamically in JS tags for my Panel (using the syntax)

  I am tryinng to dynamically generate a user interface for my Panel. Create tags work very well with the code below - the problem is the syntax for the background image.

  // Construct HTML tags dynamically and append to content container
  for (var i = 0; i < myList.length; i++){
      var html = "";
      html += "<button class='lol'>";
      html += "<span class='lol2' style='background-image: url(" + myList[i].icon + ")'></span>"; // Syntax broken here
      html += "<p class='lol3'>" + myList[i].text + "</p>";
      html += "</button>";
      $("#content").append(html);
  }
  

  The tags are generated fine - but I don't get the property background-image for them - probably because the url() attribute syntax is broken. Also important to mention is that myList [i] icon contains a string - so it's not a data problem.

  The url of the background image is not a string itself? Try adding additional quotes in there:

  var html = "";
  

  Had to get away from them otherwise is a mess.

  Hope this helps,

  Davide Barranca

• Examples of error performance... ? Difference between the runtime error and the syntax error?

  Hello, I know that an implicit validation occurs before a runtime error.

  What is the difference between a runtime error and the syntax error (syntax error seems pretty obvious).

  Could you give me an example or 2 an error of execution'd. Should not be explained with statements etc. just a small example of first.

  Hello, I know that an implicit validation occurs before a runtime error.

  You do? How do you know that? What is the source of your information?

  What is the difference between a runtime error and the syntax error (syntax error seems pretty obvious).

  The syntax is checked at the time of the analysis/compile. Runtime errors occur to, of course, of execution time. You can NOT run sometimes that there are syntax errors.

  Could you give me an example or 2 an error of execution'd. Should not be explained with statements etc. just a small example of first.

  Ideally, Oracle has created an entire book of them. Make your choice.

  http://docs.Oracle.com/CD/B28359_01/server.111/b28278/TOC.htm

  The doc PL/SQL treats Exceptions language and everything that you always wanted to know about them. It also includes examples

  http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28370/errors.htm

• What is the syntax to judge a binding value is null?

  Hello

  12.1.3 JDev is used.

  I want to judge #{bindings. ReviewerA.inputValue} is null or not, what is the syntax? I use this to control the visibility of a tab, however no matter the value actually is zero or not, the tab will appear, I am currently using "#{bindings." ReviewerA.inputValue} is empty", it works very well, thank you

  -Liang Yi

  I want to judge #{bindings. ReviewerA.inputValue} is null or not, what is the syntax?

  #{bindings. ReviewerA.inputValue == null} or #{bindings. ReviewerA.inputValue! = null}

  I am currently using "#{bindings." ReviewerA.inputValue} is empty. "

  As far as I KNOW, 'empty' syntax is: #{empty links. ReviewerA.inputValue}.

  Dario

• Why is there not a highlight of the syntax for ColdFusion?

  It is a community of support Adobe ColdFusion. Why is there not highlight the syntax for ColdFusion even? There are other but NOT of ColdFusion? Is just not that popular language ColdFusion more able to provide a code syntax highlighter? Or am I missing something here?

  

  Yes, this forum is built on the commercial platform of Jive, which isn't really a product Adobe.  If no direct ColdFusion syntax is supported.