Spice up the syntax of the format rules
Is there a document that explains the difference between the general syntax of SPICE and syntax of Multisim? I tried to read the Guide to using SPICE simulation, but the link takes me to an ad of Multisim 11. Then when I search the manual I loop back to the same place. Annoy her.
When I import a file SPICE, I would like to know which statements will be valid. Including summaries of the study.
Thanks in advance.
Hello
There is a page in the Multisim help file that highlights the difference between the syntax of Multisim SPICE and other Spice (PSPICE and XSPICE) syntaxes. To find this page, follow these steps:
- In Multisim, click Help > Multisim help
- Click the contents tab. If you use Multisim 10.1, the help topic can be found under the Multisim SPICE reference. If you use Multisim 11, the help topic are under Simulation > Multisim SPICE reference
Generally, the study summaries are ignored by Multisim. To set your analysis, you need to click the menus available through simulation > Analyses.
Hope that helps.
Tags: NI Software
Similar Questions
-
Export to spreadsheet does not show the formatting data Validation rules
Currently in Hyperion Planning 11.1.2.3, have basic color formatting based on Data Validation rules. However, when you use the option export to a worksheet, the Formatting disappears.
Understand the connection to Hyperion planning is kept only on Smart View, if she will not apply export on the worksheet?
Thank you
Mauricette
I think that the formatting will be lost during the selection of the option export spreadsheet because it is about a raw format, if you want to format would be preferable to use the Smart View method.
See you soon
John
-
specify the format of the cross-reference in read/write rules?
How can I specify a cross-reference in the rules format of reading/with import xml document?
Gary,
If you want all occurrences of the xref element to use the same format, you can specify the format of an InitialObjectFormat rule in ESD or use a rule r/w in the form:
element 'figref.
{
is part of fm of reference;
format FM property reference value is "Figure."
}
If you want to use different formats and have a particular element to specify that one, you can set an attribute whose value is the name of format with a rule like:
"xref" element
{
is part of fm of reference;
attribute ' xref-fmt' is the formula of property reference fm;
}
In fact, if your DTD defines an attribute called 'format', default FM it uses for this purpose.
-Lynne
-
5132: "the format of the string is not supported.
Hello
I'm listening channels of my new USB-5132 on the disk at the same time, using the c# example "scope: live stream To Disk. I entered "0:1" (without the quotes) in the channel name box. The result is the error "the format of the string is not supported. Is there another syntax or example that will allow me to broadcast two channels of 5132 on disk?
Thank you
Penny
Hi Penny,
If you try an empty string or a string separated by commas (as in "0.1") do you still see this error?
What version of NOR-SCOPE do you use? You can find it in Measure & Automation Explorer under software.
Also, I would be interested to know if you have other devices (besides the 5132) which show the same behavior.
-Andrew
-
I have a form with the fields of data entry simple Acrobat 11. I have, for the first time inserted drop-down lists and most of them is single-line fields. However, there are a few examples where my field must be larger to mask unwanted background. (The field will define the colur to white background are data entry, but I did not write the script for this.) When a selection is made, it appears centered in the field and I need to be aligned to the top.
I guess I can put a script on the Format tab, in the custom format script, but I don't know enough about Javascript to run on the syntax. I guess it would be a simple line or two of code. Can anyone help?
You have no control over this. They are always vertically centered. You can use a separate field in the drop down menu, however, and control its background. I suggest to use a read-only button.
-
Dynamically change the Format of Date of Application
Hi all
I am looking for a possibility to change the format of date of Application in globalization attributes dynamically according to the user.
Something like
APEX_UTIL.SET_SESSION_TIME_ZONE but for the date format.
Does anybody know how it works?
In detail:
I want dates in interactive reports display in a specific date format.
If I put the following in the attributes of 'security' - call the virtual private database PL/SQL to define the security context:
BEGIN
If password = "MY_TEST_USER" then
run immediately "alter session set nls_calendar =" English Hijrah "';"
run immediately "alter session set nls_date_format =" DD-MM-YYYY "';"
end if;
END;
Then, the dates are indicated correctly in reports interactive but not in the Action menu-> filter.
If I put date_format = "DD-MM-YYYY" in the attributes of the globalization, it works very well in the interactive report filter.
The problem is that I want to set this attribute only for some users.
Thank's,
Kirsten
(APEX 4.0/APEX 4.2)
Because you can use string syntax of substitution for the attributes of the globalization, for example, you could create an element of the AI_DATE_FORMAT application, reference & AI_DATE_FORMAT. and fill out the application element according to certain parameters in the code after the authentication of the authentication system (for example: get a parameter of an array of parameters user or somesuch).
-
Origin of the mobile ruler, setting point of reference etc.
Hello
I'm quite new to script InDesign. I do a script that moves and makes duplicate various page elements. My problem comes when the user has moved the origin of the rule it messes up my script.
How, within a script, can you put the ruler origin to the top left of the page/spread?
In addition, when you use a method pageItem.move (to) or pageItem.duplicate (to) , how do you know if you are using a left upper anchor point reference or a reference point of the centre centre etc.?
Thank you!
Nicolas
1. RulerOrigin sets whether the rule is relative to the page or spread (or vertebral column, which I say - highly recommend for normal use...). This enumeration is used (see below) to "ViewPreference.rulerOrigin" and "ViewPreference" is in turn used as "Document.viewPreferences". This gives you the line
app.activeDocument.viewPreferences.rulerOrigin = RulerOrigin.PAGE_ORIGIN;
This defines the relative position. The absolute zero can be defined via a document property: Document.zeroPoint ("the origin of the rule, specified as contact page in the format [x, y]"):
app.activeDocument.zeroPoint = [ 0,0 ];
2. the methods that are in need of a proxy site all accept an AnchorPoint, which it can be "Left", "Top", "Center right" and so on as in the proxy form.
But if you check the command PageItem, move , you can see there is nothing on the "anchor". It seems that this command uses only the anchor on the left for the "to" (for movement of which corner you use, it does not matter). It goes the same for PageItem.duplicate.
If you want to experiment and play around a bit, you can read the 'current' setting as 'LayoutWindow.transformReferencePoint ': Control Panel
alert ("Current setting is "+app.layoutWindows[0].transformReferencePoint);
that shows one long on AnchorPointnumbers, or a newer version of InDesign, if I'm not wrong, the full name.
-
Failed to run backup using the format string
Hi all
Need help with RMAN, my problem as below:
RMAN > run {}
2 > level 1 incremental backup cumulative
3 > format "D:\ora\rmanbackup\RCKLGC_INC < % s: T: %p % _ > .dbf.
4 > tag data base 'DAILY_DATAFILES ';
{5 >}
From backup 29 June 09
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 145 type device = DISK
channel ORA_DISK_1: starting from compressed data file backup set incremental level 1
channel ORA_DISK_1: specifying datafile (s) in the backup set
Enter a file 00005 name = E:\ORA\ORADATA\RCKLGC\MGMT = datafile number. DBF
Enter a file name 00002 = E:\ORA\ORADATA\RCKLGC\UNDOTBS01 = datafile number. DBF
Enter a file name 00006 = E:\ORA\ORADATA\RCKLGC\MGMT_ECM_DEPOT1 = datafile number. DBF
Enter a number of file datafile = 00001 name = E:\ORA\ORADATA\RCKLGC\SYSTEM01. DBF
Enter a number of file datafile = 00003 name = E:\ORA\ORADATA\RCKLGC\SYSAUX01. DBF
Enter a file name 00007 = E:\ORA\ORADATA\RCKLGC\DATAFILE\O1_MF_RMAN_DAT_4M9QWZT5_ = datafile number. DBF
Enter a number of file datafile = 00004 name = E:\ORA\ORADATA\RCKLGC\USERS01. DBF
channel ORA_DISK_1: starting piece 1 to 29 June 09
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 2009-06-29 18:20:49
ORA-19504: cannot create the file '< _1097:20090629:1 > D:\ORA\RMANBACKUP\RCKLGC_INC. DBF. "
ORA-27040: create file error, cannot create the file
04002 - OSD: could not open the file
S/O-error: (123 OS) the file name, directory name or volume label syntax is incorrect.
----------------------------------------
If I set the format by default %U work string. Can someone help me? The sting of format I used on the database under Linux works fine without any problems.Hi faisal.badrom,
Can you be more specific on the 'format string to meet backup requirement standards "?
Are you allowed to jump ">".< :"="">
If you can use:format 'D:\ora\rmanbackup\RCKLGC_INC_%s_%T_%p.dbf '.
Or to extend it again with the name of the database:
format 'D:\ora\rmanbackup\RCKLGC_INC_%s_%T_%p_%d.dbf '.
to meet the standard?
Kind regards
Tycho
Edited by: tychos on June 30, 2009 01:33
-
I have a new drive PNY and problems the encryption to work. I tried to format the drive, but continues to receive a notice indicating that the encryption fails because the formatting isn't correct. Thanks for your help - DD
See if the instructions detailed on this site can help you:
http://www.techmeback.com/blog/files/encrypting_a_usb_drive_on_a_mac_made_easy.h tml
-
I was entering numbers in a chart in Pages to update the information and all of a sudden the cells do not have the formatting that I want. It's changing the way numbers which I type them, and I don't know why or what to do?
Hi Slf@LF,
Numbers and pages are trying to be smart and recognize wht kind of data that you enter. If you enter something that resembles a date they will treat it as such. Some people have problems with serial numbers because programs to format their numbers and not text.
View the data that you are trying to enter and how it's changed and we ca probably to understand what is happening to her.
Quinn
-
Clips of the video choppy after export to the formats .m4v.
I created a photo slideshow with some video clips. The clips will play in Quicktime, Photo Slideshow, etc. But when the slideshow is exported in a .m4v format film, the clips are jerky. Even the DVD created with the .m4v movie plays jerky clips. Is this a problem with the picture or the format that I export? Or maybe even my DVD Creator which is Wondershare?
It probably comes to DVD conversion, but you do not say much on what parts of the film are jerky.
-
I bought the iTouch two at a time, one for my wife and one for me. In the application 'Notes' my wife shows the symbol "+" to the formatting and mine does not work. Any suggestion.
Could you please include screenshots of the so-called issue?
-
Refresh in Firefox 36.0 and got all my info back EXCEPT that when I try to go to Yahoo, he recognizes me, my computer or my accounts. As well as the formatting is all screwed up, everything is displayed in mode requirements.
Anyone know how to fix or recover 35 Firefox?
If possible could you post a screenshot to show what you see
(Be sure to hide all personal information)
See you soon
Brad -
How can I copy the format of a sentence or paragraph on another phrase or a paragraph?
When I copy and paste a section of an article to another, I want to change the format of the section imported to accompany the rest of the article. In Outlook or MS customer, I would use the brush for this icon. How can I copy the format of a section in Thunderbird in another section?
Thank you very much.
I would like to use stationery to say my favorite styles, then use 'Paste without shaped' to allow the formatting that is currently in force to apply to the text pasted, not knowing everything already set the imported text. A weakness of Thunderbird in its native form, is that it tends to forget to insert your policy chosen by default etc.. The add-on stationery that heals by making your explicit requirement.
Messages sent by users of Thunderbird often appear ugly serif text (IMHO), what is lacking Outlook, Thunderbird forgets to say that you have chosen a sans serif font when composing.
Without stationery, all your efforts to align your text can come were reduced to nothingness.
-
I 'reset' Firefox at the suggestion of Mozilla as my browser worked slowly. What a mistake! As soon as I did, all sites have become unreliable. When I click on the allow an exception, the site then comes to the top, but the formatting is all wrong. I used Firefox for years, but will not be longer if I can't solve this problem. Other browsers work so I will go to one of them. I uninstalled and reinstalled Firefox and that has not worked. My date and time settings are correct.
Uninstalled Browsersafeguard and it seems to work! VERY happy!
Maybe you are looking for
-
How can I disable siri in the screens scrolling
How can I disable siri while that scroll the screens, it keeps telling me things like the 2nd row from the point 3
-
My HP ENVY 4500 does not print
I recently bought a HP ENVY 4500 printer I it connected wireless through e-print HP, but it does not print any PDF files or documents web page, it would only print Microsoft Office documents. I tried to manually connect via USB, but it does not print
-
I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? What this mean and how can I solve this problem? I have also a certificate has expired and do NOT know how to get
-
HP PRO 3500: recovery disks
Hello, I recently installed a new motherboard identical to the old and extra 4 GB ram, bringing the total to 8 G and the new hard drive of 1 t. My question is that I will be able to use the 4 discs of recovery media set that I did with the original m
-
Windows not can find new updates (code 80004002)
original title: Windows not can find new updates on the windows updates, I get a message that says "windows has not can find new updates a mistake due to the new updates for your computer errors found: code 80004002 Windows Update incountered a unkno