explode effect?

Similar Questions

• Effects are limited to the framework including chart

  It's been a few years I used AE (CS4 was the latest version) and I'm having a problem I know, I didn't have before.  In other words, if I use an Illustrator or. JPG file, none of the effects will go outside the bounding box of chart (I specifically try to use "Burst") . I have watched and read several tutorials on the use of effects (think something is changed since the last time I used AE). The instructor used imported and specified graphics to do something special with them.  They just apply the effect to the chart and everything worked.  When I apply 'burst' to a shape layer it works very well (the form explodes outside the bounding box), so I know that I at least understand the basics.  I read a few posts that have the problem of duress with the text and the suggestion was beforehand comp, but this does not work for me. I also increased the radius of the effect, so he's well outside the chart encompassing (as in the screenshot below).  I am sure that there is a simple solution to this. but I can't understand it.  I adjusted (I think) what I can both the graphic and the effect.  So what don't understand me?

  Just so I'm clear, this issue is not just with "Shatter".  It is with all the effects I've tried ('Dispersion', 'Wave World', etc.).  It is for the Version AE 13.5.1.48 using Windows 10.

  

  There are many effects which are limited to the size of the layer. You can either compose before and add the effect, or you can add push the limits of the layer before the effect.

• A few recommendations to this effect please

  Hi, I'm looking for just simple advice on the conduct of an effect very Geek. As part of a "training car" thing im doing, I decided to re-create the Hadouken Ryu of this anime Street Fighter. It is in this video

  https://youtu.be/tpiLsEx5Rew?t=9s

  Now, I know it's a bit simple, but here's what I'm looking for:

  -I'll play with the particles in AE. I don't know if the particular particle system Trapcode or the world.  I know that playing with the settings I can get something that looks like the video. But I didn't know how to make particle implode rather than explode from the Center. The first thing that comes to mind is to animate it as I want, pre make up and then apply reverse time, but maybe there is an easier way.

  -The movement of the arm could be achieved using a moving effect and/or duration echo with a motion blur.

  -Use advance lighting and by changing its color to add more intensity to all this.

  -The ball of energy at the end it presents itself in the form of anime, but if I want to recreate in the live action, I need to do more volume to make it look easy. Maybe use CC sphere for a composition that has solid white with a texture and a bit of fractal noise. According to me, there's a tutorial in video copilot where you can create a Sun or planet of fire. Maybe take a few details might help.

  -J' also use levels to add more contrast and hide some parts of the original sequence with addition / screen as a blending mode to make a few small chips on the face and arms.

  That's what I think to do in AE coming over my head. I plan it's going to be well informed and have a lot of combine on first before opening AE

  Any additional help or a dive would be highly appreciated.

  Individual has a radial force field that allows negative values, but it can be difficult to master and to animate the values could be tedious. In addition, it's a comic, particles are probably just a bunch of clusters point animated with some different and then put rotation values scale set. The rest seems OK, but better start shooting your pictures before worry about the finer details. Just make sure you have some light on the set to simulate lightning and the flash of the explosion. just using blend modes will not make it look real...

  Mylenium

• Initiate an explosion with the glow effect

  Thank you once again for all your help guys.  Now, I am creating an explosion with a glow effect.  Problem is when I apply the glow effect to my form, I created, it assumes I want the explosion to happen as soon as the video starts to play.  In fact, I would like the explosion occur somewhat later in the video, maybe about 25 images in the video.  I can't find a setting for the keyframe at the beginning of the explosion.  Is there a key to this picture and I can't?  I even tried out the shape in the timeline panel so it is not up to that on the frame of 25, but it does not work either.

  Thanks again

  Let me know

  You didn't follow my instructions or experiment with the settings of the force.

  In wired mode, go to the section 25 and activate keyframes for position 1 force and RADIUS. Now move back a section to frame 24 and adjust the size and position of strength 1 just behind the layers and small do not to touch the later. If Force 1 and 2 do not affect the layer, it cannot explode.

  Shatter is based on the physics of the real world and who clicks on in your head as soon as you will be able to do amazing things.

• particles - layer exploder playground

  What's up with that? I chose a layer explode. Nothing happens. View sick bar to the half-point for a long time.

  No effect. Nothing. What I am doing wrong? Does anyone know of a tut online. For layere exploder or partical exploder? Read the help document is not help for me.

  TIA

  The minute I choose .jpg as the layer exploder layer, the program freezes for a bit.

  That sounds about right. It's sampling of the layer and set the grid of particles which, as a whole of the resolution and the default of 2px to the particle size can take a few moments. After that, you should see a continuous stream of particles being emitted and falling down due to the severity of the defect. In order to transmit only on the first image, keyframe of the particle size as I have already written. You can also set the size of the particles to higher values before actually reference it the layer. You can simply have a performance problem that makes sampling into some kind of loop forever, and so you are never able to work.

  Mylenium

• How to eliminate a brilliant on the face effect

  I would be grateful a tips on how to eliminate this effect, shining on the face of this actor

  

  Makeup artist 3 filter Softworks Sheffield ($100), available for FxFactory.

  Perfect skin was completely written from scratch. With the new algorithms of smoothing (including one for addressing the black spots and dark spots), refined selection techniques of the skin (with a new control interface on the screen with the possibility of areas of the mask of the screen) and a feature of the skin with the size, lighting, texture and depth controls, perfect skin is the cornerstone of any beauty Kit.

  http://www.sheffieldsoftworks.com/

• Bubble effect does not

  Just download the latest version of the software, and the new effect of bubble in the messages seems not to work.  Tactile 3D works well, but does not appear in messages

  Check the settings > general > accessibility and make sure you have Motion cut off.

• Drive light external HARD disk Warrior exploded

  I use DiskWarrior do a reconstruction of the hard drive to save the files, if possible. Hard drive does not appear on the desktop, which had been seen as a USB device on system information. During the reconstruction, the Seagate external HARD disk light exploded and is no longer visible to the Profiler system as a USB device. Should I cancel the reconstruction? Should I try disk referee to 'stabilize' the disc and run Disk Warrior?

  Can you describe the real problem which caused you to run DiskWarrior "to save the files?  Who can provide a clue about your current situation.

  If DiskWarrior' forever,' you have to cancel rebuild it later.  How long it has beed running?  It may take time, if repairs are done by DiskWarrior.

  DiskWarrior works repairing data directory player (which defines where the files are stored).  There are other types of utilities who hunt the disc for actual data.  For example

  https://www.prosofteng.com/data-rescue-recovery-software/

• I have iOS 10 and I am still unable to make messages with animation effects. How can I solve this problem?

  I have iOS 10 and I am still unable to make messages with animation effects. How can I solve this problem?

  Without knowing what is happening when you try, it is difficult to recommend troubleshooting. However, one of the first steps is to ensure that you don't have to reduce the Motion activated in accessibility.

• How to disable the sound effects?

  After the upgrade to Sierra, various applications now have sound effects. I unchecked sound effects as part of its interface. But the mail still makes a swoosh sound when sending anything. I don't know yet what other applications continue to use sound effects.

  Is it possible to disable all sound effects?

  Some applications have their own internal settings not affected by system settings in the Finder

  for example, to disable the "Swoosh" in mail go to mail > Preferences, click the general tab and clear the sounds of other messaging features.

  

• iOS 10 effects e-mail: they are available on the iPhone 6 s?

  When I press the blue arrow 3D (after the text entry) I get nothing. This feature is enabled on the iPhone 6 s?

  Go to settings > general > accessibility > reduce Motion > Off. If it is enabled, the effects will not work.

• Effects of e-mail in IOS 10

  I downloaded the new OS and now I can't send a message without adding a kind of effects as balloons and confetti.

  How to disable this option?  It's really annoying!

  Just a short click the blue up arrow.

• effects of IMessage can be received but not sent

  On my old iPhone 6 and I had a problem where I could send effects iMessage, but not receive them. I solved this by disabling the reduced movement and signing in iMessage (some so I had been using my phone for centuries while disconnected (e) which!).

  Today my iPhone more 7 arrived and I now have the opposite problem - I get the effects but I can't send them. When I click and stand on the blue arrow, after a few seconds, the screen goes blurred except for the text that I just wrote. I have no menu showing me various effect options.

  Any ideas what is the cause? I have tried toggling movement reduced on and outside, iMessage on and outside, iMessage signature and put it back, but none of this has made a difference.

  Hi porrig!

  It's always exciting to have a new iPhone. I'm glad to hear you have the iPhone 7 more! iMessages with effects of message sending is a fantastic new feature of iOS 10. You are in the right place for help.

  Your new iPhone Plus 7 has the ability to detect different levels of pressure used. This feature is called Touch 3D. You may notice additional options by pressing firmly on the applications, for example, because of this feature.

  In this case, it seems that you use the right process to send the effect of the message, but the blue arrow may need a firmer touch that you are currently using. Try to use a firmer touch on the blue arrow to see if the message options.

  If this solves the problem for you, but you want to adjust the firmness necessary to display these options, check out this resource:

  Change 3D on your iPhone 6s or 6s iPhone tactile sensitivity more

  The resource applies to your iPhone 7 more, too!

  Take care!

• Effects of the bubble

  How do you send balloons with the effect of bubble in iMessage?

  You ask about doing it on the MacBook Air? If not, and referring to the iPhone, check this page in the iPhone user Guide. http://help.Apple.com/iPhone/10/#/iph3d4cb79c9

  If you're talking about the MacBook, I don't know if this is a feature for iMessage on the computer. But then, I'm not a Mac user and could not be sure of that.

• Effects of message does not

  I'm not running an iPhone 6s more und have upgraded to the latest version of iOS 10 (and even reinstalled two times).

  When 3D-pressing the button send in messages, no effect appear. However, all the other new goodies in the messages work.

  Any advice much appreciated

  Daniel

  Hi Daniel

  You send or receive the bubble or full screen effects if reduce Motion is running.

  • Go to: settings > general > accessibility > Motion reduce > disable.

  Effects of the message can apply to messages sent through iMessage (own Apple service), which appear in blue in the Messages. They cannot be applied to SMS or MMS messages (shown in green).

  More information:

  Use effects of message with iMessage on your iPhone, iPad and iPod touch - Apple Support